Advanced search Recent papers Author index Keyword index Browse by series Help Desk About

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures
PDF papers
References

Hits 1 to 20 of 77

Reformat results as: short   short into frame   detailed   detailed into frame  

_id 1b10
id 1b10
authors Bay, Joo-Hwa
year 2001
title Cognitive Biases - The case of tropical architecture
source Delft University of Technology
summary This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series thesis:PhD
type normal paper
email
last changed 2006/05/28 07:42
_id sigradi2006_e183a
id sigradi2006_e183a
authors Costa Couceiro, Mauro
year 2006
title La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords evolutionary computation; genetic architectures; artificial/natural intelligence
series SIGRADI
email
last changed 2016/03/10 09:49
_id cf2011_p027
id cf2011_p027
authors Herssens, Jasmien; Heylighen Ann
year 2011
title A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary Architects—like other designers—tend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses—in the way architecture is conceived, taught and critiqued—results in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as “movement”, “guiding” and/or “rest” plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords blindness, design parameters, haptics, inclusive design, vision
series CAAD Futures
email
last changed 2012/02/11 19:21
_id 8239
authors Campello, Ruy Eduardo and Maculan, Nelson
year 1982
title On Deep Disjunctive Cutting Planes for Set Partitioning : A Computationally Oriented Research.
source Pittsburgh: Design Research Center, CMU [DRC-70-11-82], 10 p.
summary Several mathematical programming problems can be formulated as Disjunctive Programming Problems. This approach offers a powerful procedure for the generation of new and strong cutting planes with desirable properties. For general integer programs, the traditional cutting plane methodologies proved less efficient than enumerative techniques. However, for certain classes of problems, such as set partitioning, cutting planes are known to be efficient. Since the disjunctive cuts are strong, they can be expected to perform better. This paper reports on computational results with disjunctive B(.) cuts for the set partitioning problem, evaluated in terms of computer resources and other independent measures in solving specific randomly generated test problems under controlled conditions. [includes bibliography].
keywords Mathematics, Operations Research, Integer Programming, Optimization
series CADline
last changed 1999/02/15 15:17
_id 56de
authors Handa, M., Hasegawa, Y., Matsuda, H., Tamaki, K., Kojima, S., Matsueda, K., Takakuwa, T. and Onoda, T.
year 1996
title Development of interior finishing unit assembly system with robot: WASCOR IV research project report
source Automation in Construction 5 (1) (1996) pp. 31-38
summary The WASCOR (WASeda Construction Robot) research project was organized in 1982 by Waseda University, Tokyo, Japan, aiming at automatizing building construction with a robot. This project is collaborated by nine general contractors and a construction machinery manufacturer. The WASCOR research project has been divided into four phases with the development of the study and called WASCOR I, II, III, and IV respectively. WASCOR I, II, and III finished during the time from 1982 to 1992 in a row with having 3-4 years for each phase, and WASCOR IV has been continued since 1993. WASCOR IV has been working on a automatized building interior finishing system. This system consists of following three parts. (1) Development of building system and construction method for automated interior finishing system. (2) Design of hardware system applied to automated interior finishing system. (3) Design of information management system in automated construction. As the research project has been developing, this paper describes the interim report of (1) Development of building system and construction method for automated interior finishing system, and (2) Design of hardware system applied to automated interior finishing system.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22
_id c7e9
authors Maver, T.W.
year 2002
title Predicting the Past, Remembering the Future
source SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series SIGRADI
email
last changed 2016/03/10 09:55
_id a426
authors Barsky, Brian A. and Greenberg, Donald P.
year 1982
title Interactive Surface Representation System Using a B-spline Formulation with Interpolation Capability
source computer Aided Design. July, 1982. vol. 14: pp. 187-194 : col.ill. includes bibliography
summary An interactive surface representation system is described which uses a parametric uniform bicubic B-spline formulation which can describe a surface initially defined to interpolate a specified network of points
keywords CAD, curved surfaces, computational geometry, interpolation, B-splines
series CADline
last changed 2003/06/02 13:58
_id eabb
authors Boeykens, St. Geebelen, B. and Neuckermans, H.
year 2002
title Design phase transitions in object-oriented modeling of architecture
doi https://doi.org/10.52842/conf.ecaade.2002.310
source Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series eCAADe
email
last changed 2022/06/07 07:52
_id 8c27
authors Kalay, Yehuda E.
year 1982
title Determining the Spatial Containment of a Point in General Polyhedra
source Computer graphics and Image Processing. 1982. vol. 19: pp. 303-334 : ill. includes bibliography. See also criticism and improvements in Orlowski, Marian
summary Determining the inclusion of a point in volume-enclosing polyhedra (shapes) in 3D space is, in principle, the extension of the well-known problem of determining the inclusion of a point in a polygon in 2D space. However, the extra degree of freedom makes 3D point-polyhedron containment analysis much more difficult to solve than the 2D point polygon problem, mainly because of the nonsequential ordering of the shape elements, which requires global shape data to be applied for resolving special cases. Two general O(n) algorithms for solving the problem by reducing the 3D case into the solvable 2D case are presented. The first algorithm, denoted 'the projection method,' is applicable to any planar- faced polyhedron, reducing the dimensionality by employing parallel projection to generate planar images of the shape faces, together with an image of the point being tested for inclusion. The containment relationship of these images is used to increment a global parity-counter when appropriate, representing an abstraction for counting the intersections between the surface of the shape and a halfline extending from the point to infinity. An 'inside' relationship is established when the parity-count is odd. Special cases (coincidence of the halfline with edges or vertices of the shape) are resolved by eliminating the coincidental elements and re-projecting the merged faces. The second algorithm, denoted 'the intersection method,' is applicable to any well- formed shape, including curved-surfaced ones. It reduces the dimensionality by intersecting the polygonal trace of the shape surface at the plane of intersection, which is tested for containing the trace of the point in the plane, directly establishing the overall 3D containment relationship. A particular O(n) implementation of the 2D point-in-polygon inclusion algorithm, which is used for solving the problem once reduced in dimensionality, is also presented. The presentation is complemented by discussions of the problems associated with point-polyhedron relationship determination in general, and comparative analysis of the two particular algorithms presented
keywords geometric modeling, point inclusion, polygons, polyhedra, computational geometry, algorithms, search, B-rep
series CADline
email
last changed 2003/06/02 10:24
_id 2243
authors O'Rourke, J., Chien, C.-B. and Olson, Th. (et al)
year 1982
title A New Linear Algorithm for Intersecting Convex Polygons
source Computer Graphics and Image Processing. 1982. vol. 19: pp. 384-391 : ill. includes a short bibliography
summary An algorithm is presented that computes the intersection of two convex polygons in linear time. The algorithm is fundamentally different from the only known linear algorithms for this problem, due to Shamos and to Hoey. These algorithms depend on a division of the plane into either angular sectors (Shamos) or parallel slabs (Hoey), and are mildly complex. The authors' algorithm searches for the intersection points of the polygons by advancing a single pointer around each polygon, and is very easy to program
keywords algorithms, boolean operations, polygons, intersection, search
series CADline
last changed 2003/06/02 14:42
_id 8d70
authors Fenves, Stephen J.
year 1982
title A Note on Flow Networks and Structures
source Pittsburgh: Design Research Center, CMU, April, 1982. 7, [11] p. : ill
summary The purpose of this note is to explore certain common features of flow and structural networks, in terms of the effect of the (usually implicit) global equilibrium equations on the range of problems amenable to analysis. The objective is to extend the standard analysis problem and explore the possibility of 'tuning' flow and structural networks by preassigning values of certain inflow and reaction components
keywords networks, civil engineering, structures, analysis
series CADline
last changed 2003/06/02 10:24
_id 4eb7
authors Kirsch, Uri
year 1982
title Optimal Design of Continuous Prestressed Concrete Structures
source 25 p. : il. tables Pittsburgh, PA: Design Research Center, CMU, December, 1982. DRC-12-11-82. includes bibliography: p. 20-21
summary Optimal design of continuous prestressed systems is stated in a nonlinear programming form. The design variables are the concrete dimensions, tendon coordinates, and prestressing force. The constraints are related to various behavior and design requirements and the objective function represents the overall cost. Some simplified models, intended to improve the solution efficiency, are presented. These include: explicit formulations of the general problem and the problem of minimizing the concrete dimensions; linear programming formulation of the tendon configuration and prestressing force optimization; and direct determination of the prestressing force for given concrete dimensions and tendon coordinates. Some examples illustrate the various problem formulations and solution methodology
keywords engineering, structures, optimization, linear programming
series CADline
last changed 1999/02/12 15:08
_id 2045
authors Balas, Egon
year 1982
title A Class of Location, Distribution and Scheduling Problems : Modeling and Solution Methods
source 21 p., 8 + 4 p. of appendix : ill. Carnegie Mellon University, Pittsburgh, PA: Design Research Center, December, 1982. includes bibliography
summary Discusses the potential of set covering techniques. Illustrates problem formulation techniques on several important classes of real-world problems. Also describes a class of algorithms for solving set covering problems, based on cutting planes, heuristics and subgradient optimization
keywords problem solving, methods, algorithms, problem definition, modeling, optimization, operations research
series CADline
last changed 1999/02/12 15:07
_id 48a2
authors Bergstrom, Axel Lennart
year 1982
title Computer Graphics in Community Planning
source June, 1982. 3 p
summary The digitized map of Sweden uses a technique for graphical presentation in color based on an automatic drawing machine called the 'color ink jet plotter.' A short description of this project is given
keywords mapping, computer graphics
series CADline
last changed 1999/02/12 15:07
_id 89e4
authors Cendes, Z.J., Shenton, D. and H. Shahnasser
year 1982
title Adaptive Finite Element Mesh Generation Using the Delaunay Algorithm
source 3 p. : ill. Pittsburgh: Design Research Center, CMU, December, 1982
summary Includes bibliography. A two-dimensional generator is described which automatically creates optimal finite element meshes using the Delaunay triangulation algorithm. The mesh generator is adaptive in the sense that elements containing the largest normalized errors are automatically refined, providing meshes with a uniform error density. The system runs on a PERQ computer made by Three Rivers Computer Company. It is menu oriented and utilizes multiple command and display windows to create and edit the object description interactively. Mesh generation from the object data base is automatic, although it may be modified interactively by the user if desired. Application of the mesh generator to electric machine design and to magnetic bubble simulation shows it to be one of the most powerful and easy to use systems yet devised
keywords electrical engineering, triangulation, algorithms, OOPS, finite elements, analysis
series CADline
last changed 2003/06/02 13:58
_id 666c
authors Clark, K. and Tarnlund, S. (eds.)
year 1982
title Logic Programming
source 366 p
summary Orlando, Florida: Academic Press,Inc., 1982. includes bibliography and index p. [341]-361. Based on the proceedings of the first international workshop on logic programming held in Debrecen, Hungry. ( A.P.I.C. Studies in Data Processing No.16). The 23 papers cover issues like application of logic programming, implementation, control, and understanding natural languages
keywords techniques, programming, logic, languages, symbolic, AI
series CADline
last changed 2002/12/13 15:23
_id 4b04
authors De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year 1983
title Proceedings of the International Conference eCAADe 1983
doi https://doi.org/10.52842/conf.ecaade.1983
source Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
summary In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels.

The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series eCAADe
email
more http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed 2022/06/07 07:49
_id c7cd
authors Foley, James D. and Van Dam, Andrias
year 1982
title Fundamentals of Interactive Computer Graphics
source xx, 664 p. [12] plates : ill. (some col.) Reading, Mass.: Addison Wesley Pub. Co., 1982. includes bibliography: p.625-653 and index. -- (System Programming Series)
summary Presents different aspects of interactive computer graphics programming: hardware, software, data structures, mathematical manipulation of graphical objects, the development of a 3D geometrical transformations, and an implementation strategy for a subroutine package based on the core system
keywords computer graphics, software, programming, theory, practice
series CADline
last changed 2003/06/02 13:58
_id 5509
authors Koutamanis, Alexandros
year 1990
title Development of a computerized handbook of architectural plans
source Delft University of Technology
summary The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series thesis:PhD
email
last changed 2003/02/12 22:37
_id 0095
authors Kowalski, T.J. and Thomas, Donald E.
year 1982
title The VLSI Design Automation Assistant : First Step
source 5 p. Design Research Center, CMU, December, 1982. DRC-18-57-82. includes bibliography
summary This paper describes an approach to VLSI design synthesis using both knowledge-based expert systems and data and control flow analysis. The authors are concerned with design synthesis as it proceeds from an algorithmic description of a VLSI system to a list of technology-independent registers, operators, data paths, and control signals. This paper discusses the development of the Design Automation Assistant from its first interviews with expert VLSI designers to its current prototype state. Four designs of a microcomputer are presented along with the changes in the knowledge base that created those designs
keywords design, automation, integrated circuits, synthesis, expert systems, systems, knowledge base
series CADline
last changed 2003/06/02 13:58

For more results click below:

this is page 0show page 1show page 2show page 3HOMELOGIN (you are user _anon_231275 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002