Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 77

Reformat results as: short short into frame detailed detailed into frame

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8239
authors	Campello, Ruy Eduardo and Maculan, Nelson
year	1982
title	On Deep Disjunctive Cutting Planes for Set Partitioning : A Computationally Oriented Research.
source	Pittsburgh: Design Research Center, CMU [DRC-70-11-82], 10 p.
summary	Several mathematical programming problems can be formulated as Disjunctive Programming Problems. This approach offers a powerful procedure for the generation of new and strong cutting planes with desirable properties. For general integer programs, the traditional cutting plane methodologies proved less efficient than enumerative techniques. However, for certain classes of problems, such as set partitioning, cutting planes are known to be efficient. Since the disjunctive cuts are strong, they can be expected to perform better. This paper reports on computational results with disjunctive B(.) cuts for the set partitioning problem, evaluated in terms of computer resources and other independent measures in solving specific randomly generated test problems under controlled conditions. [includes bibliography].
keywords	Mathematics, Operations Research, Integer Programming, Optimization
series	CADline
last changed	1999/02/15 15:17

_id	666c
authors	Clark, K. and Tarnlund, S. (eds.)
year	1982
title	Logic Programming
source	366 p
summary	Orlando, Florida: Academic Press,Inc., 1982. includes bibliography and index p. [341]-361. Based on the proceedings of the first international workshop on logic programming held in Debrecen, Hungry. ( A.P.I.C. Studies in Data Processing No.16). The 23 papers cover issues like application of logic programming, implementation, control, and understanding natural languages
keywords	techniques, programming, logic, languages, symbolic, AI
series	CADline
last changed	2002/12/13 15:23

_id	e7b8
authors	Dahl, Veronica
year	1983
title	Logic Programming as a Representation of Knowledge
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 106-110 : ill. includes bibliography
summary	Logic has traditionally provided a firm conceptual framework for representing knowledge. As it can formally deal with the notion of logical consequence, the introduction of Prolog has made it possible to represent knowledge in terms of logic and also to expect appropriate inferences to be drawn from it automatically. This article illustrates and explores these ideas with respect to two central representational issues: problem solving knowledge and database knowledge. The technical aspects of both subjects have been covered elsewhere (Kowalski, R. Logic for problem solving, North- Holland pub. 1979 ; Dahl, V. on database system development through logic ACM Trans.vol.7/no.3/Mar.1982 pp.102). This explanation uses simple, nontechnical terms
keywords	PROLOG, knowledge, representation, logic, programming, problem solving, database
series	CADline
last changed	1999/02/12 15:08

_id	c7cd
authors	Foley, James D. and Van Dam, Andrias
year	1982
title	Fundamentals of Interactive Computer Graphics
source	xx, 664 p. [12] plates : ill. (some col.) Reading, Mass.: Addison Wesley Pub. Co., 1982. includes bibliography: p.625-653 and index. -- (System Programming Series)
summary	Presents different aspects of interactive computer graphics programming: hardware, software, data structures, mathematical manipulation of graphical objects, the development of a 3D geometrical transformations, and an implementation strategy for a subroutine package based on the core system
keywords	computer graphics, software, programming, theory, practice
series	CADline
last changed	2003/06/02 13:58

_id	0dfa
authors	Giuse, Dario
year	1982
title	DP - Command Set
source	24, [22] p. : ill. July, 1982. includes bibliography
summary	This is a short description of the command set of the Drawing Program (DP), a general-purpose graphics editor that runs on a personal computer. This paper contains general notions about the program, the complete description of the commands and a set of advanced techniques for DP users
keywords	software, programming, drafting, systems
series	CADline
last changed	1999/02/12 15:08

_id	8a88
authors	Anderson, David P.
year	1982
title	Hidden Line Elimination in Projected Grid Surfaces
source	ACM Transactions on Graphics. October, 1982. vol. 1: pp. 274-288 : ill. includes a short bibliography
summary	The hidden line and hidden surface problems are simpler when restricted to special classes of objects. An example is the class of grid surfaces, that is, graphs of bivariate functions represented by their values on a set of grid points. Projected grid surfaces have geometric properties which permit hidden line or hidden surface elimination to be done more easily than in the general case. These properties are discussed in this paper, and an algorithm is given which exploits them
keywords	algorithms, hidden lines, hidden surfaces, grids, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	2045
authors	Balas, Egon
year	1982
title	A Class of Location, Distribution and Scheduling Problems : Modeling and Solution Methods
source	21 p., 8 + 4 p. of appendix : ill. Carnegie Mellon University, Pittsburgh, PA: Design Research Center, December, 1982. includes bibliography
summary	Discusses the potential of set covering techniques. Illustrates problem formulation techniques on several important classes of real-world problems. Also describes a class of algorithms for solving set covering problems, based on cutting planes, heuristics and subgradient optimization
keywords	problem solving, methods, algorithms, problem definition, modeling, optimization, operations research
series	CADline
last changed	1999/02/12 15:07

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	48a2
authors	Bergstrom, Axel Lennart
year	1982
title	Computer Graphics in Community Planning
source	June, 1982. 3 p
summary	The digitized map of Sweden uses a technique for graphical presentation in color based on an automatic drawing machine called the 'color ink jet plotter.' A short description of this project is given
keywords	mapping, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	6094
authors	Blinn, J.I.
year	1982
title	A Generalization of Algebraic Surface Drawing
source	ACM Transaction on Graphics, vol. 1, no. 3, pp. 235-256, 1982
summary	The technology of creating realistic and visually interesting images of three- dimensional shapes is advancing on many fronts. One such front is the develop- ment of algorithms for drawing curved surfaces directly from their mathematical definitions rather than by dividing them into large numbers of polygons. Two classes of surfaces which have received attention are the quadric and the bivariate parametric surfaces. Bivariate parametric surfaces are generated by three func- tions of two variables (most popularly polynomials), as the variables take on different values. Algorithms dealing with such surfaces are due to Catmull; Lane, Carpenter, Whitted and Blinn; and Clark.
series	journal paper
last changed	2003/11/21 15:16

_id	66df
authors	Cendes, Z.J., Minhas, F.U. and Silvester, P.P.
year	1982
title	Universal Finite Element Matrices for Tetrahedra
source	45, [22] p Pittsburgh: Design Research Center, CMU, December, 1982. DRC- 18-58-82. includes bibliography.
summary	Methods are described for forming finite element matrices for a wide variety of operators on tetrahedral finite elements, in a manner similar to that previously employed for line segments and triangles. This technique models the differentiation and product-embedding operators as rectangular matrices, and produces finite element matrices by replacing all required analytic operations by their finite matrix analogues. The method is illustrated by deriving the conventional matrix representation for Laplace's equation. Brief computer programs are given, which generate universal finite element matrices for use in various applications
keywords	mathematics, computational geometry, finite elements, analysis
series	CADline
last changed	2003/06/02 13:58

_id	89e4
authors	Cendes, Z.J., Shenton, D. and H. Shahnasser
year	1982
title	Adaptive Finite Element Mesh Generation Using the Delaunay Algorithm
source	3 p. : ill. Pittsburgh: Design Research Center, CMU, December, 1982
summary	Includes bibliography. A two-dimensional generator is described which automatically creates optimal finite element meshes using the Delaunay triangulation algorithm. The mesh generator is adaptive in the sense that elements containing the largest normalized errors are automatically refined, providing meshes with a uniform error density. The system runs on a PERQ computer made by Three Rivers Computer Company. It is menu oriented and utilizes multiple command and display windows to create and edit the object description interactively. Mesh generation from the object data base is automatic, although it may be modified interactively by the user if desired. Application of the mesh generator to electric machine design and to magnetic bubble simulation shows it to be one of the most powerful and easy to use systems yet devised
keywords	electrical engineering, triangulation, algorithms, OOPS, finite elements, analysis
series	CADline
last changed	2003/06/02 13:58

_id	adcd
authors	Cohen, Paol R. and Feigenbaum, Edward A. (editors)
year	1982
title	The Handbook of Artificial Intelligence
source	xviii, 639 p. Stanford, California: HeurisTech Press, 1982. vol. 3: See The Handbook of Artificial intelligence edited by Avron, Barr and Feigenbaum, Edward. Includes bibliography p. 565-586 and cumulative indexes
summary	Part of three volumes, this volume contains chapters on models of cognition, automatic deduction, vision, learning and planning
keywords	AI, deduction, learning, cognition, planning
series	CADline
last changed	2003/06/02 13:58

_id	482a
authors	Cole, Sam
year	1982
title	A Microprocessor Revolution and the World Distribution of Income: A General Equilibrium Approach
source	International Political Science Review. 1982. vol.3: pp. 434- 454 ; ill. includes bibliography
summary	This article shows that even if the world economy is able to withstand and surmount the present world crisis, the combination of market forces and rapid technical change that would be the result of a microprocessor revolution will give rise to large shifts in the distribution of income within and between both rich and poor countries. Some developed and developing economies may be unable to join the move to new technologies. In a world governed by only economic forces, all countries, whether they choose to adopt new systems of production or not, will be affected. Indeed, whatever their degree of involvement, all countries are beginning to feel in varying degrees the chain reaction that reverberates through and between all sectors of their domestic and the world economies. To gain insights into interrelations between technological change and global markets, this article uses a special type of model -- a general equilibrium model -- that enables the study to focus on exactly these variables
keywords	technology, economics
series	CADline
last changed	1999/02/12 15:07

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	0650
authors	Fenves, Stephen J. and Rasdorf, William J.
year	1982
title	Role of Database Management Systems in Structural Engineering
source	15 p.: ill Pittsburgh: Design Research Center, CMU, December, 1982. includes bibliography.
summary	--- Presented at International Association of Bridge and Structural Engineers Symposium on Informatics in Structural Engineering.(1982 : Bergamo, Italy). The future integration of structural engineering application programs will depend critically on integrated databases which provide access to information in essentially arbitrary sequences, and which automatically perform a large portion of integrity checking on the data. One source of such design databases are the database management systems (DBMS) evolving from management applications. The paper surveys such systems and presents some extensions needed
keywords	integration, database, DBMS, systems, civil engineering
series	CADline
last changed	2003/06/02 10:24

_id	8d70
authors	Fenves, Stephen J.
year	1982
title	A Note on Flow Networks and Structures
source	Pittsburgh: Design Research Center, CMU, April, 1982. 7, [11] p. : ill
summary	The purpose of this note is to explore certain common features of flow and structural networks, in terms of the effect of the (usually implicit) global equilibrium equations on the range of problems amenable to analysis. The objective is to extend the standard analysis problem and explore the possibility of 'tuning' flow and structural networks by preassigning values of certain inflow and reaction components
keywords	networks, civil engineering, structures, analysis
series	CADline
last changed	2003/06/02 10:24

For more results click below: