Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 77

Reformat results as: short short into frame detailed detailed into frame

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	aed6
authors	Hofstadter, Douglas R.
year	1982
title	Metafont, Metamathematics, and Metaphysics
source	23, [38] p. : ill. Bloomington: Computer Science Department, Indiana University, december, 1982. Technical report No. 136. includes bibliography.--- Comments on Donald Knuth's Article 'The Concept of a Meta-Font.' --- See also Donald Knuth's 'The Concept of a Meta-Font,' Visible Language, (Winter 1982), vol. XVI, no. 1, pp. 3-27
summary	It is argued that readers are likely to carry away from Donald Knuth's article 'The Concept of a Meta-Font' a falsely optimistic view of the extent to which the design of typefaces and letterforms can be mechanized through an approach depending on describing letterforms by specifying the settings of a large number of parameters. Through a comparison to mathematical logic, it is argued that no such set of parameters can capture the essence of any semantic category. Some different ways of thinking about the problem of the 'spirit' residing behind any letterform are suggested, connecting to current research issues in the field of artificial intelligence
keywords	languages, AI, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	ddssar9616
id	ddssar9616
authors	Hunt, John
year	1996
title	Establishing design directions for complex architectural projects: a decision support strategy
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The paper seeks to identify characteristics of the design decision-making strategy implicit in the first placed design submissions for three significant architectural competitions: the Sydney Opera House competition, and two recent design competitions for university buildings in New Zealand. Cohn Rowe's (1982) characterisation of the design process is adopted as a basis for the analysis of these case studies. Rowe's fertile analogy between design and (criminal) detection is first outlined, then brought to bear on the case studies. By means of a comparison between the successful and selected unsuccessful design submissions in each case, aspects of Rowe's characterisation of the design process are confirmed. On the basis of this analysis several common features of the competition-winning submissions, and their implicit decision-making processes, are identified. The first of these features relates to establishing project or programmatic requirements and the prioritizing of these. The second concerns the role of design parameters or requirements that appear as conflicting or contradictory, in the development of a design direction and in innovative design outcomes. The third concerns the process of simultaneous consideration given by the designer to both project parameters or requirements, and to design solution possibilities - a process described by Rowe as "dialectical interanimation".
series	DDSS
last changed	2003/08/07 16:36

_id	e234
authors	Kalay, Yehuda E. and Harfmann, Anton C.
year	1985
title	An Integrative Approach to Computer-Aided Design Education in Architecture
source	February, 1985. [17] p. : [8] p. of ill
summary	With the advent of CAD, schools of architecture are now obliged to prepare their graduates for using the emerging new design tools and methods in architectural practices of the future. In addition to this educational obligation, schools of architecture (possibly in partnership with practicing firms) are also the most appropriate agents for pursuing research in CAD that will lead to the development of better CAD software for use by the profession as a whole. To meet these two rather different obligations, two kinds of CAD education curricula are required: one which prepares tool- users, and another that prepares tool-builders. The first educates students about the use of CAD tools for the design of buildings, whereas the second educates them about the design of CAD tools themselves. The School of Architecture and Planning in SUNY at Buffalo has recognized these two obligations, and in Fall 1982 began to meet them by planning and implementing an integrated CAD environment. This environment now consists of 3 components: a tool-building sequence of courses, an advanced research program, and a general tool-users architectural curriculum. Students in the tool-building course sequence learn the principles of CAD and may, upon graduation, become researchers and the managers of CAD systems in practicing offices. While in school they form a pool of research assistants who may be employed in the research component of the CAD environment, thereby facilitating the design and development of advanced CAD tools. The research component, through its various projects, develops and provides state of the art tools to be used by practitioners as well as by students in the school, in such courses as architectural studio, environmental controls, performance programming, and basic design courses. Students in these courses who use the tools developed by the research group constitute the tool-users component of the CAD environment. While they are being educated in the methods they will be using throughout their professional careers, they also act as a 'real-world' laboratory for testing the software and thereby provide feedback to the research component. The School of Architecture and Planning in SUNY at Buffalo has been the first school to incorporate such a comprehensive CAD environment in its curriculum, thereby successfully fulfilling its obligation to train students in the innovative methods of design that will be used in architectural practices of the future, and at the same time making a significant contribution to the profession of architecture as a whole. This paper describes the methodology and illustrates the history of the CAD environment's implementation in the School
keywords	CAD, architecture, education
series	CADline
email
last changed	2003/06/02 13:58

_id	8239
authors	Campello, Ruy Eduardo and Maculan, Nelson
year	1982
title	On Deep Disjunctive Cutting Planes for Set Partitioning : A Computationally Oriented Research.
source	Pittsburgh: Design Research Center, CMU [DRC-70-11-82], 10 p.
summary	Several mathematical programming problems can be formulated as Disjunctive Programming Problems. This approach offers a powerful procedure for the generation of new and strong cutting planes with desirable properties. For general integer programs, the traditional cutting plane methodologies proved less efficient than enumerative techniques. However, for certain classes of problems, such as set partitioning, cutting planes are known to be efficient. Since the disjunctive cuts are strong, they can be expected to perform better. This paper reports on computational results with disjunctive B(.) cuts for the set partitioning problem, evaluated in terms of computer resources and other independent measures in solving specific randomly generated test problems under controlled conditions. [includes bibliography].
keywords	Mathematics, Operations Research, Integer Programming, Optimization
series	CADline
last changed	1999/02/15 15:17

_id	66df
authors	Cendes, Z.J., Minhas, F.U. and Silvester, P.P.
year	1982
title	Universal Finite Element Matrices for Tetrahedra
source	45, [22] p Pittsburgh: Design Research Center, CMU, December, 1982. DRC- 18-58-82. includes bibliography.
summary	Methods are described for forming finite element matrices for a wide variety of operators on tetrahedral finite elements, in a manner similar to that previously employed for line segments and triangles. This technique models the differentiation and product-embedding operators as rectangular matrices, and produces finite element matrices by replacing all required analytic operations by their finite matrix analogues. The method is illustrated by deriving the conventional matrix representation for Laplace's equation. Brief computer programs are given, which generate universal finite element matrices for use in various applications
keywords	mathematics, computational geometry, finite elements, analysis
series	CADline
last changed	2003/06/02 13:58

_id	56de
authors	Handa, M., Hasegawa, Y., Matsuda, H., Tamaki, K., Kojima, S., Matsueda, K., Takakuwa, T. and Onoda, T.
year	1996
title	Development of interior finishing unit assembly system with robot: WASCOR IV research project report
source	Automation in Construction 5 (1) (1996) pp. 31-38
summary	The WASCOR (WASeda Construction Robot) research project was organized in 1982 by Waseda University, Tokyo, Japan, aiming at automatizing building construction with a robot. This project is collaborated by nine general contractors and a construction machinery manufacturer. The WASCOR research project has been divided into four phases with the development of the study and called WASCOR I, II, III, and IV respectively. WASCOR I, II, and III finished during the time from 1982 to 1992 in a row with having 3-4 years for each phase, and WASCOR IV has been continued since 1993. WASCOR IV has been working on a automatized building interior finishing system. This system consists of following three parts. (1) Development of building system and construction method for automated interior finishing system. (2) Design of hardware system applied to automated interior finishing system. (3) Design of information management system in automated construction. As the research project has been developing, this paper describes the interim report of (1) Development of building system and construction method for automated interior finishing system, and (2) Design of hardware system applied to automated interior finishing system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c361
authors	Logan, Brian S.
year	1986
title	Representing the Structure of Design Problems
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 158-170
summary	In recent years several experimental CAD systems have emerged which, focus specifically on the structure of design problems rather than on solution generation or appraisal (Sussman and Steele, 1980; McCallum, 1982). However, the development of these systems has been hampered by the lack of an adequate theoretical basis. There is little or no argument as to what the statements comprising these models actually mean, or on the types of operations that should be provided. This chapter describes an attempt to develop a semantically adequate basis for a model of the structure of design problems and presents a representation of this model in formal logic.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e55f
authors	Newell, Allen and Rosenbloom, Paul S.
year	1982
title	Mechanisms of Skill Acquisition and the Law of Practice
source	[2], III, 52 p. : ill Design Research Center, CMU, April, 1982. DRC-15-16-82. includes bibliography.
summary	Practice, and the performance improvement that it engenders, has long been a major topic in psychology. In this paper, both experimental and theoretical approaches are employed in an investigation of the mechanisms underlying this improvement. On the experimental side, it is argued that a single law, the power of law of practice, adequately describes all of the practice data. On the theoretical side, a model of practice rooted in modern cognitive psychology, the chunking theory of learning, is formulated. The paper consists of (1) the presentation of a set of empirical practice curves; (2) mathematical investigations into the nature of power law functions; (3) evaluations of the ability of three different classes of functions to adequately model the empirical curves; (4) a discussion of the existing models of practice; (5) a presentation of the chunking theory of learning
keywords	problem solving, learning, psychology, knowledge acquisition, practice, expert, representation
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0be9
authors	Oksala, Tarkko
year	1982
title	Computer Assisted Generation of Houses
source	1982? pp. 111-120 : ill. includes bibliography
summary	The logical basis in a generative approach to housing planning is characterized in connection with historical and actual examples. A row-house grammar is presented and its extensions to other types of houses are critically considered. Finally complete computer generation of small apartments covering the municipal housing production of the town of Helsinki is discussed
keywords	CAD, architecture, automation, design, floor plans, shape grammars, synthesis, layout
series	CADline
last changed	1999/02/12 15:09

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
doi	https://doi.org/10.52842/conf.caadria.2002.213
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2003_m_040
id	cf2003_m_040
authors	BAY, Joo-Hwa
year	2003
title	Making Rebuttals Available Digitally for Minimising Biases in Mental Judgements
source	Digital Design - Research and Practice [Proceedings of the 10th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-1210-1] Tainan (Taiwan) 13–15 October 2003, pp. 147-156
summary	The problem of heuristic biases (illusions) discussed by Tversky and Kahneman (1982) that can lead to errors in judgement by human designers, when they use precedent knowledge presented graphically (Bay 2001). A Cognitive framework of belief, goal, and decision, and a framework of representation of architectural knowledge by Tzonis are used to map out the problem of heuristic biases in the human mind. These are used to discuss what aspects of knowledge can be presented explicitly and digitally to users to make rebuttal more available for human thinking at the cognitive level. The discussion is applicable to both inductive and analytic digital knowledge systems that use precedent knowledge. This discussion is targeted directly at means of addressing bias in the human mind using digital means. The problem of human bias in machine learning and generalisation are discussed in a different paper, and the problems of international or non-intentional machine bias are not part of discussion in this paper.
keywords	analogy, bias, design thinking, environmental design, heuristics
series	CAAD Futures
last changed	2003/11/22 07:26

_id	89e4
authors	Cendes, Z.J., Shenton, D. and H. Shahnasser
year	1982
title	Adaptive Finite Element Mesh Generation Using the Delaunay Algorithm
source	3 p. : ill. Pittsburgh: Design Research Center, CMU, December, 1982
summary	Includes bibliography. A two-dimensional generator is described which automatically creates optimal finite element meshes using the Delaunay triangulation algorithm. The mesh generator is adaptive in the sense that elements containing the largest normalized errors are automatically refined, providing meshes with a uniform error density. The system runs on a PERQ computer made by Three Rivers Computer Company. It is menu oriented and utilizes multiple command and display windows to create and edit the object description interactively. Mesh generation from the object data base is automatic, although it may be modified interactively by the user if desired. Application of the mesh generator to electric machine design and to magnetic bubble simulation shows it to be one of the most powerful and easy to use systems yet devised
keywords	electrical engineering, triangulation, algorithms, OOPS, finite elements, analysis
series	CADline
last changed	2003/06/02 13:58

_id	482a
authors	Cole, Sam
year	1982
title	A Microprocessor Revolution and the World Distribution of Income: A General Equilibrium Approach
source	International Political Science Review. 1982. vol.3: pp. 434- 454 ; ill. includes bibliography
summary	This article shows that even if the world economy is able to withstand and surmount the present world crisis, the combination of market forces and rapid technical change that would be the result of a microprocessor revolution will give rise to large shifts in the distribution of income within and between both rich and poor countries. Some developed and developing economies may be unable to join the move to new technologies. In a world governed by only economic forces, all countries, whether they choose to adopt new systems of production or not, will be affected. Indeed, whatever their degree of involvement, all countries are beginning to feel in varying degrees the chain reaction that reverberates through and between all sectors of their domestic and the world economies. To gain insights into interrelations between technological change and global markets, this article uses a special type of model -- a general equilibrium model -- that enables the study to focus on exactly these variables
keywords	technology, economics
series	CADline
last changed	1999/02/12 15:07

_id	0650
authors	Fenves, Stephen J. and Rasdorf, William J.
year	1982
title	Role of Database Management Systems in Structural Engineering
source	15 p.: ill Pittsburgh: Design Research Center, CMU, December, 1982. includes bibliography.
summary	--- Presented at International Association of Bridge and Structural Engineers Symposium on Informatics in Structural Engineering.(1982 : Bergamo, Italy). The future integration of structural engineering application programs will depend critically on integrated databases which provide access to information in essentially arbitrary sequences, and which automatically perform a large portion of integrity checking on the data. One source of such design databases are the database management systems (DBMS) evolving from management applications. The paper surveys such systems and presents some extensions needed
keywords	integration, database, DBMS, systems, civil engineering
series	CADline
last changed	2003/06/02 10:24

_id	8d70
authors	Fenves, Stephen J.
year	1982
title	A Note on Flow Networks and Structures
source	Pittsburgh: Design Research Center, CMU, April, 1982. 7, [11] p. : ill
summary	The purpose of this note is to explore certain common features of flow and structural networks, in terms of the effect of the (usually implicit) global equilibrium equations on the range of problems amenable to analysis. The objective is to extend the standard analysis problem and explore the possibility of 'tuning' flow and structural networks by preassigning values of certain inflow and reaction components
keywords	networks, civil engineering, structures, analysis
series	CADline
last changed	2003/06/02 10:24

For more results click below: