Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 75

Reformat results as: short short into frame detailed detailed into frame

_id	56de
authors	Handa, M., Hasegawa, Y., Matsuda, H., Tamaki, K., Kojima, S., Matsueda, K., Takakuwa, T. and Onoda, T.
year	1996
title	Development of interior finishing unit assembly system with robot: WASCOR IV research project report
source	Automation in Construction 5 (1) (1996) pp. 31-38
summary	The WASCOR (WASeda Construction Robot) research project was organized in 1982 by Waseda University, Tokyo, Japan, aiming at automatizing building construction with a robot. This project is collaborated by nine general contractors and a construction machinery manufacturer. The WASCOR research project has been divided into four phases with the development of the study and called WASCOR I, II, III, and IV respectively. WASCOR I, II, and III finished during the time from 1982 to 1992 in a row with having 3-4 years for each phase, and WASCOR IV has been continued since 1993. WASCOR IV has been working on a automatized building interior finishing system. This system consists of following three parts. (1) Development of building system and construction method for automated interior finishing system. (2) Design of hardware system applied to automated interior finishing system. (3) Design of information management system in automated construction. As the research project has been developing, this paper describes the interim report of (1) Development of building system and construction method for automated interior finishing system, and (2) Design of hardware system applied to automated interior finishing system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	adcd
authors	Cohen, Paol R. and Feigenbaum, Edward A. (editors)
year	1982
title	The Handbook of Artificial Intelligence
source	xviii, 639 p. Stanford, California: HeurisTech Press, 1982. vol. 3: See The Handbook of Artificial intelligence edited by Avron, Barr and Feigenbaum, Edward. Includes bibliography p. 565-586 and cumulative indexes
summary	Part of three volumes, this volume contains chapters on models of cognition, automatic deduction, vision, learning and planning
keywords	AI, deduction, learning, cognition, planning
series	CADline
last changed	2003/06/02 13:58

_id	ddssar9616
id	ddssar9616
authors	Hunt, John
year	1996
title	Establishing design directions for complex architectural projects: a decision support strategy
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The paper seeks to identify characteristics of the design decision-making strategy implicit in the first placed design submissions for three significant architectural competitions: the Sydney Opera House competition, and two recent design competitions for university buildings in New Zealand. Cohn Rowe's (1982) characterisation of the design process is adopted as a basis for the analysis of these case studies. Rowe's fertile analogy between design and (criminal) detection is first outlined, then brought to bear on the case studies. By means of a comparison between the successful and selected unsuccessful design submissions in each case, aspects of Rowe's characterisation of the design process are confirmed. On the basis of this analysis several common features of the competition-winning submissions, and their implicit decision-making processes, are identified. The first of these features relates to establishing project or programmatic requirements and the prioritizing of these. The second concerns the role of design parameters or requirements that appear as conflicting or contradictory, in the development of a design direction and in innovative design outcomes. The third concerns the process of simultaneous consideration given by the designer to both project parameters or requirements, and to design solution possibilities - a process described by Rowe as "dialectical interanimation".
series	DDSS
last changed	2003/08/07 16:36

_id	e234
authors	Kalay, Yehuda E. and Harfmann, Anton C.
year	1985
title	An Integrative Approach to Computer-Aided Design Education in Architecture
source	February, 1985. [17] p. : [8] p. of ill
summary	With the advent of CAD, schools of architecture are now obliged to prepare their graduates for using the emerging new design tools and methods in architectural practices of the future. In addition to this educational obligation, schools of architecture (possibly in partnership with practicing firms) are also the most appropriate agents for pursuing research in CAD that will lead to the development of better CAD software for use by the profession as a whole. To meet these two rather different obligations, two kinds of CAD education curricula are required: one which prepares tool- users, and another that prepares tool-builders. The first educates students about the use of CAD tools for the design of buildings, whereas the second educates them about the design of CAD tools themselves. The School of Architecture and Planning in SUNY at Buffalo has recognized these two obligations, and in Fall 1982 began to meet them by planning and implementing an integrated CAD environment. This environment now consists of 3 components: a tool-building sequence of courses, an advanced research program, and a general tool-users architectural curriculum. Students in the tool-building course sequence learn the principles of CAD and may, upon graduation, become researchers and the managers of CAD systems in practicing offices. While in school they form a pool of research assistants who may be employed in the research component of the CAD environment, thereby facilitating the design and development of advanced CAD tools. The research component, through its various projects, develops and provides state of the art tools to be used by practitioners as well as by students in the school, in such courses as architectural studio, environmental controls, performance programming, and basic design courses. Students in these courses who use the tools developed by the research group constitute the tool-users component of the CAD environment. While they are being educated in the methods they will be using throughout their professional careers, they also act as a 'real-world' laboratory for testing the software and thereby provide feedback to the research component. The School of Architecture and Planning in SUNY at Buffalo has been the first school to incorporate such a comprehensive CAD environment in its curriculum, thereby successfully fulfilling its obligation to train students in the innovative methods of design that will be used in architectural practices of the future, and at the same time making a significant contribution to the profession of architecture as a whole. This paper describes the methodology and illustrates the history of the CAD environment's implementation in the School
keywords	CAD, architecture, education
series	CADline
email
last changed	2003/06/02 13:58

_id	0be9
authors	Oksala, Tarkko
year	1982
title	Computer Assisted Generation of Houses
source	1982? pp. 111-120 : ill. includes bibliography
summary	The logical basis in a generative approach to housing planning is characterized in connection with historical and actual examples. A row-house grammar is presented and its extensions to other types of houses are critically considered. Finally complete computer generation of small apartments covering the municipal housing production of the town of Helsinki is discussed
keywords	CAD, architecture, automation, design, floor plans, shape grammars, synthesis, layout
series	CADline
last changed	1999/02/12 15:09

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4617
authors	Wang, Ming-Hung and Habraken, John N.
year	1982
title	Six Operations : Notations of Design Process
source	Spring, 1982. pp. 1-18 : ill
summary	This paper defines six design operations that are to be sufficient to explicate physical design processes. Some inherent relations among these six operations are explored to provide a technical base for notating design processes in a network format. An example of describing a real design process is given, and a demonstration of how the network representation system can facilitate planning a given design process more efficiently is given
keywords	design process, architecture
series	CADline
last changed	2003/06/02 13:58

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	09f3
authors	Burt, Michael, Kent, Eli and Ne'eman, Eliyahu (et al)
year	1982
title	Single- and Multilayer Large-Span Membrane Structures for Daylight, Energy Control, and Savings
source	1982? PP. 177-183 : ill. includes bibliography
summary	This paper examines membrane-covered structures. Such structures offer many advantages and their cost of construction is lower than that of equivalent alternatives. However, these thin, single-layer membrane covers cannot provide the control of daylight and heat required to make them environmentally satisfactory and energy-efficient. To improve the performance of membrane covers, a new solution has been studied. Double-layer membranes can be built without severe technical difficulties and provide a much higher degree of static and dynamic control. Further work is being carried out to study the option of incorporating into the two layer membrane structures solar collectors between the layers, thus converting the large area of the membrane cover into an active solar system
keywords	lighting, energy, analysis, topology, structures, building
series	CADline
last changed	2003/06/02 10:24

_id	666c
authors	Clark, K. and Tarnlund, S. (eds.)
year	1982
title	Logic Programming
source	366 p
summary	Orlando, Florida: Academic Press,Inc., 1982. includes bibliography and index p. [341]-361. Based on the proceedings of the first international workshop on logic programming held in Debrecen, Hungry. ( A.P.I.C. Studies in Data Processing No.16). The 23 papers cover issues like application of logic programming, implementation, control, and understanding natural languages
keywords	techniques, programming, logic, languages, symbolic, AI
series	CADline
last changed	2002/12/13 15:23

_id	0095
authors	Kowalski, T.J. and Thomas, Donald E.
year	1982
title	The VLSI Design Automation Assistant : First Step
source	5 p. Design Research Center, CMU, December, 1982. DRC-18-57-82. includes bibliography
summary	This paper describes an approach to VLSI design synthesis using both knowledge-based expert systems and data and control flow analysis. The authors are concerned with design synthesis as it proceeds from an algorithmic description of a VLSI system to a list of technology-independent registers, operators, data paths, and control signals. This paper discusses the development of the Design Automation Assistant from its first interviews with expert VLSI designers to its current prototype state. Four designs of a microcomputer are presented along with the changes in the knowledge base that created those designs
keywords	design, automation, integrated circuits, synthesis, expert systems, systems, knowledge base
series	CADline
last changed	2003/06/02 13:58

_id	4bae
authors	Rasdorf, William J. and Kutay, Ali R.
year	1982
title	Maintenance of Integrity During Concurrent Access in a Building Design Database
source	Computer Aided Design. Butterworth Scientific Ltd., July, 1982. vol. 14: pp. 201-207. includes bibliography
summary	This paper proposes a building design database model that insures database integrity in a highly flexible relational structure while supporting disciplinary and interdisciplinary concurrent use. The model strongly supports designer-database interaction by providing extremely versatile data access mechanisms and an associated concurrency control mechanism. Building design components are represented in terms of their location, their attribute values, and combinations of the two. Both the logical and physical database models are illustrated. The relational model is vital for achieving the greatest flexibility in representing and accessing building design data. Its standard relations are ideal for information representation. In addition, the operators provided by the model enable the engineer to readily restructure the database to support building design needs. This paper introduces a database structuring mechanism referred to as catalogs. Catalogs provide a highly versatile mechanism for accessing database information by grouping building components into data units called modules. The modules provide convenient access to multiple design entities. Also included is a protection relation that provides a concurrency control environment for the catalog relations. The module concept is particularly important in design because it enables the ad hoc groupings of data which are so often necessary to support the design process. The module is recommended as the level to which a locking concurrency control mechanism be applied. It is a small enough data unit to support concurrency for interdisciplinary design activities, yet not so small as to require extensive overhead in the concurrency control implementation. Two different modes of locking are recommended for the catalog relations of a building design database to achieve maximum concurrency and efficiency of access by designers
keywords	database, concurrency, access, constraints management
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	48a2
authors	Bergstrom, Axel Lennart
year	1982
title	Computer Graphics in Community Planning
source	June, 1982. 3 p
summary	The digitized map of Sweden uses a technique for graphical presentation in color based on an automatic drawing machine called the 'color ink jet plotter.' A short description of this project is given
keywords	mapping, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	0107
authors	Akin, Omer and Weinel, Eleanor F. (editors)
year	1982
title	Representation and Architecture
source	v, 285 p. : ill. Silver Spring, Maryland: Information Dynamics, Inc., 1982
summary	A collection of papers developed from the proceeding of the Northeastern Regional meeting of the Association of Collegiate Schools of Architecture (ACSA), held at the Department of Architecture, Carnegie Mellon University. The introduction includes articles about representation, representation and architecture. Part 1, Who/To Whom speaks about representation and participatory design process, and of a system for recording behavior and occupying of design. Part 2, How: includes Figure, System and Memory, the Process of Design ; Representation and Creativity in Architecture and Miniature Substitutes. Part 3, With What :Information and Data Base in Design : the Computer as a Design Medium, Slides Talk and Translation
keywords	design process, representation, architecture, creativity
series	CADline
email
last changed	2003/05/17 10:09

_id	8a88
authors	Anderson, David P.
year	1982
title	Hidden Line Elimination in Projected Grid Surfaces
source	ACM Transactions on Graphics. October, 1982. vol. 1: pp. 274-288 : ill. includes a short bibliography
summary	The hidden line and hidden surface problems are simpler when restricted to special classes of objects. An example is the class of grid surfaces, that is, graphs of bivariate functions represented by their values on a set of grid points. Projected grid surfaces have geometric properties which permit hidden line or hidden surface elimination to be done more easily than in the general case. These properties are discussed in this paper, and an algorithm is given which exploits them
keywords	algorithms, hidden lines, hidden surfaces, grids, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	843d
authors	Avron, Barr and Feigenbaum, Edward A. (editors)
year	1982
title	The Handbook of Artificial Intelligence
source	xiii, 428 p. Stanford, California: Heuristech Press, 1982. vol. 2 of 3: Includes bibliography p.383-402 and indexes
summary	Part 2 of a three vol. work. This vol covers: AI programming languages, the kinds of programming languages suitable for AI, features and environments developed that were developed for its purpose. Expert systems in science, medicine and education. The last chapters reviews automatic programming
keywords	AI, programming, languages, expert systems, automation
series	CADline
last changed	2003/06/02 13:58

_id	4763
authors	Balas, Egon
year	1982
title	Integer Programming
source	December, 1982. 32 p
summary	Includes bibliography. This is an introductory survey of integer programming, its theory, methodology and applications, for the Encyclopedia of Statistical Sciences
keywords	integer programming, operations research
series	CADline
last changed	1999/02/12 15:07

_id	2045
authors	Balas, Egon
year	1982
title	A Class of Location, Distribution and Scheduling Problems : Modeling and Solution Methods
source	21 p., 8 + 4 p. of appendix : ill. Carnegie Mellon University, Pittsburgh, PA: Design Research Center, December, 1982. includes bibliography
summary	Discusses the potential of set covering techniques. Illustrates problem formulation techniques on several important classes of real-world problems. Also describes a class of algorithms for solving set covering problems, based on cutting planes, heuristics and subgradient optimization
keywords	problem solving, methods, algorithms, problem definition, modeling, optimization, operations research
series	CADline
last changed	1999/02/12 15:07

_id	a426
authors	Barsky, Brian A. and Greenberg, Donald P.
year	1982
title	Interactive Surface Representation System Using a B-spline Formulation with Interpolation Capability
source	computer Aided Design. July, 1982. vol. 14: pp. 187-194 : col.ill. includes bibliography
summary	An interactive surface representation system is described which uses a parametric uniform bicubic B-spline formulation which can describe a surface initially defined to interpolate a specified network of points
keywords	CAD, curved surfaces, computational geometry, interpolation, B-splines
series	CADline
last changed	2003/06/02 13:58

For more results click below: