Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 114

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8d59
authors	Andersen, J.M.
year	1983
title	CAD in Architectural Practice
source	Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary	A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords	computer graphics, HVAC, applications, practice, architecture
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	6e1a
authors	Tokumasu, Shinji, Kunitomo, Yoshio and Ohta, Yosimi (et al)
year	1983
title	Solid Model in Geometric Modeling System : HICAD
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 360-366 : ill. includes bibliography
summary	The geometric modeling system plays an important role in CAD for mechanical engineering. This paper presents the general purposed conversational geometric modeling system HICAD, which has been developed to confirm the integrated CAD. The HICAD is a generalized geometric model which includes three of the typical geometric modelling, i.e., the implementation method of solid model is especially discussed with the summary of whole system
keywords	solid modeling, geometric modeling, CAD
series	CADline
last changed	2003/06/02 13:58

_id	808b
authors	Wyleczuk, Rosanne, Meyer, Lynn and Babcock, Gigi
year	1983
title	The Transfer of University Software for Industry Use
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 756-760. includes bibliography
summary	Computer-aided engineering software is generated in abundance in educational institutions. As a major source of design automation software, universities have a lot to offer: a progressive research environment; a seemingly inexhaustible supply of software engineers in the form of undergraduates, graduate engineers, and professors; and a no-risk, multi- disciplinary design lab for experimentation. For these reasons, university software is being widely sought for use in production/commercial environments. This paper examines the interface between industry and the universities during the transfer of design automation software. A printed circuit board router, a graphics subroutine library, and a circuit simulation program are used to illustrate issues arising from the technology transfer. Guidelines to increase the likelihood of success in such transfers of software are provided
keywords	industry, engineering, software, CAE, education, technology, communication
series	CADline
last changed	2003/06/02 13:58

_id	c832
authors	Rinderle, J.R. and Suh, N.P.
year	1983
title	Measures of Functional Coupling in Design
source	Pittsburgh, PA: Design Research Center, CMU, December, 1983. 6 p. : some ill. includes bibliography
summary	Algebraic and geometric representations of the general design problem are presented. Quantitative measures of functional coupling in design are developed from this representation which provide valuable insight into the significance of the independence axiom of design. These theoretical measures are applied to Reaction Injection Molding machinery to illustrate the concept of functional independence and the application of quantitative measures of functional coupling
keywords	design, theory, mechanical engineering
series	CADline
last changed	2003/06/02 13:58

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8b75
authors	Cullen, Ian
year	1983
title	Expert Systems in Architectural and Planning Education
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.1-IV.15
doi	https://doi.org/10.52842/conf.ecaade.1983.x.a7j
summary	The paper discusses the problems and possibilities of a project initiated recently within the Bartlett in the general area of knowledge engineering. The aim is to assemble a set of knowledge bases which may be explored interactively by students. The system will differ from traditional CAL packages in that it will be both problem oriented - designed to extract from the students the information required to reach a specific decision - and capable of providing an explanation of its approach at any point.
keywords	Knowledge Engineering
series	eCAADe
last changed	2022/06/07 07:50

_id	c201
authors	Elfes, Alberto and Talukdar, Sarosh N.
year	1983
title	A Distributed Control System for a Mobile Robot
source	7 p. : ill. Pittsburgh: Design Research Center, CMU, December, 1983. includes bibliography
summary	This paper describes a distributed software control structure developed for the CMU Rover, an advanced mobile robot equipped with a variety of sensors. Expert modules control the operation of the sensors and actuators, interpret sensory and feedback information, build an internal model of the robot's working environment, devise strategies to accomplish proposed tasks and execute these strategies. Each expert module is composed of a pair of (master, slave) processes, where the master process controls the scheduling and working of the slave process. Communication among expert modules occurs asynchronously over a blackboard structure. Information specific to the execution of a given task is provided through a control plan. The system is distributed over a network of processors. Real-time operating system kernels local to each processor and an interprocess message communication mechanism ensure transparency of the underlying network structure. The various parts of the system are presented in this paper and future work to be performed is mentioned
keywords	robotics, control
series	CADline
last changed	2003/06/02 13:58

_id	c4a6
authors	Haapasalo, Harri
year	1997
title	The Role of CAD In Creative Architectural Sketching
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o2b
summary	The history of computers in architectural design is very short; only a few decades; when compared to the development of methods in practical design (Gero 1983). However, the development of the user interfaces has been very fast. According to the practical observations of over one hundred architects, user interfaces are at present inflexible in sketching, although computers can make drafts and the creation of alternatives quicker and more effective in the final stages of designing (Haapasalo 1997). Based on our research in the field of practical design we would wish to stimulate a wider debate about the theory of design. More profound perusal compels us to examine human modes, pre-eminently different levels of thinking and manners of inference. What is the meaning of subconscious and conscious thinking in design? What is the role of intuition in practical design? Do the computer aided design programs apply to creative architectural sketching? To answer such questions, distinct, profound and broad understanding from different disciplines is required. Even then, in spite of such specialist knowledge we cannot hope to unambiguously and definitively answer such questions.
keywords	Creativity, Design Process, Architectural Design, Sketching, Computer Aided Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/haapas/haapas.htm
last changed	2022/06/07 07:50

_id	1247
authors	Hasell, Mary Joyce
year	1983
title	Gaming Simulation: A Communication Tool for Architects and Designers
source	University of Michigan
summary	In today's technological society, people spend more and more time in built environments that they have little or no control in shaping. There is also a large gap in communication between designers of the built environment and non-designers. The language that non-designers use to communicate specific spatial needs, whether aesthetic or functional, is different from the formal language that designers use to communicate these issues with each other. Gaming simulation, as a communication tool, has a number Note of characteristics that make it useful for improving communication and increasing participation among designers and non-designers. In this study, a method of teaching the design of gaming simulation to designers of the built environment is developed. This method includes a Game Design Index or cataloging system of gaming tehniques, within the context of a game design process. A questionnaire was used to interview the designers of the most current physical design games about the gaming techniques in their games. Their answers were organized into the Game Design Index and set within the context of a process for designing a game. This process was tested by teaching a course to graduate students in Urban Planning and Architecture. Further testing was done by holding a game design workshop for professional architects. The findings indicate that it is possible to analyze existing games for their gaming techniques and to index them in an organized way. It is also possible to add this index to an existing game design process. By using this process, graduate students were able to design gaming simulations of high quality, although professionals who attended a day-and-a-half workshop, were not so successful. This latter problem was primarily the result of the complexity of the task and the time constraint imposed. This dissertation describes the game design process that was used to teach neophytes to design games as well as the Game Design Indexes for ten existing games. A comprehensive review of games concerned with physical design is included
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	27f4
authors	Holtz, Neal M. and Rasdorf, William J.
year	1983
title	LISP - A CAD System Programming Language
source	Journal of Technical Topics in Civil Engineers. April, 1983. vol. 109: pp. 58-72
summary	LISP may currently be the best programming language to use for the development of engineering computer-aided design (CAD) systems. While languages like FORTRAN represent important advances over their predecessors, it may be that a single static programming language will never be completely adequate for engineering programming. What is needed is a language that can evolve in response to changing needs. This paper is concerned with the programming languages that support CAD systems. The choice of such a programming language significantly influences the flavor of the product derived from that language. The language should provide a style of interaction and a programming environment that is a good model for software developers. At the very least, this will lead to a consistency among most programs developed using that language. The language should also help reduce program complexity and permit one to program at the level of application concepts, rather than at the level of memory locations. LISP or LISP-like languages provide perhaps our greatest opportunity for reducing program complexity to manageable proportions. More importantly, the systems are of better quality when they reflect the style provided by LISP; they tend to be more easily tailored to the needs of individual users
keywords	CAD, LISP, languages, programming, engineering
series	CADline
last changed	2003/06/02 13:58

_id	cbe9
authors	Jacob, Robert J.K.
year	1983
title	Using Formal Specifications in the Design of a Human-Computer Interface
source	Communications of the ACM April, 1983. vol. 26: pp. 259-264 : diagrams. includes bibliography.
summary	Formal specification techniques are valuable in software development because they permit a designer to describe the external behavior of a system precisely without specifying its internal implementation. Although formal specifications have been applied to many areas of software systems, they have not been widely used for specifying user interfaces. In the Military Message System project at the Naval Research Laboratory, the user interfaces as well as the other components of a family of message systems are specified formally, and prototypes are then implemented from the specifications. This paper illustrates the specification of the user interface module for the family of message systems. It then surveys specification techniques that can be applied to human-computer interfaces and divides the techniques into two categories: those based on state transition diagrams and those based on BNF. Examples of both types of specifications are given. Specification notations based on state transition diagrams are preferable to those based on BNF because the former capture the surface structure of the user interface more perspicuously. In either notation, high-level abstraction for describing the semantics of the user interface is needed, and an application-specific one is used here
keywords	user interface, design, theory
series	CADline
last changed	2003/06/02 13:58

_id	6259
authors	Kalay, Yehuda E. and Majkowski, Bruce R.
year	1990
title	CAD Technology Transfer: A Case Study
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
doi	https://doi.org/10.52842/conf.acadia.1990.133
summary	Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cb5f
authors	Kant, Elaine and Newell, Allen
year	1983
title	An Automatic Algorithm Designer : An Initial Implementation
source	Design Research Center, CMU, May, 1983. 10 p. includes bibliography
summary	This paper outlines a specification for an algorithm-design system (based on previous work involving protocol analysis) and describes an implementation of the specification that is a combination frame and production system. In the implementation, design occurs in two problem spaces: one about algorithms and one about the task domain. The partially worked out algorithms are represented as configurations of data-flow components. A small number of general purpose operators construct and modify the representations. These operators are adapted to different situations by instantiation and means-ends analysis rules. The data-flow space also includes symbolic and test-case execution rules that drive the component-refinement process by exposing both problems and opportunities. A domain space about geometric images supports test-case execution, domain-specific problem solving, recognition and discovery
keywords	algorithms, design, systems, synthesis, automation, protocol analysis, frames, discovery, problem solving
series	CADline
last changed	2003/06/02 13:58

_id	cf2009_771
id	cf2009_771
authors	LaBelle, Guillaume; Nembrini, Julien and Huang, Jeffrey
year	2009
title	Programming framework for architectural design ANAR+: Object oriented geometry
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 771- 785
summary	From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The presented research explores the use of programming as explorative and reflexive medium (Schön, 1983) through the development of a programming framework for architectural design. Based on Java, the ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depend on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations.
keywords	Parametric design, programming language, architectural Geometry, pro-cessing
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	4843
authors	Lee, Y.C. and Fu, K.S.
year	1983
title	Integration of Solid Modeling and Data Base Management for CAD/CAM
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 367-373 : ill
summary	For the fast growing CAD/CAM technologies, geometric solid modeling plays one of the most important roles. In order to satisfy a variety of engineering applications, an integrated database management system based on solid modeling is highly desirable. In the proposed approach, a concise object representation scheme, Constructive Solid Geometry (CSG), is adopted as the basis for database design. The underlying generic relational model is found to be more adequate than the conventional relational model in characterizing the embedded data abstraction. A systematic method is devised for converting the CSG scheme into a generic model based on the BNF grammar which depicts the CSG scheme. A relational query language, SEQUEL, has been modified to define, control, and manipulate the flat relations which represent the highly structural generic model
keywords	integration, CSG, relational database, management, solid modeling, CAD, CAM
series	CADline
last changed	2003/06/02 13:58

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: