Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 114

Reformat results as: short short into frame detailed detailed into frame

_id	213d
authors	Bernard, Yves and Dupagne, Albert
year	1983
title	Volume: a computer Program for building Modelisation and Manipulation
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.70-III.79
doi	https://doi.org/10.52842/conf.ecaade.1983.x.n2m
summary	We describe a computer program VOLUME for interactive 3D modelling of building which can be used in many problems (heat losses calculations, architectural evaluation, ...) where a geometric representation is required. The program is more than a tool to input a geometry: it is also a tool for design; manipulations are very easy and many design solutions can be tried. We then discuss about developments for improving the quality of that tool in the design process.
keywords	Computer Aided Design, 3D Modelling, Computer-user Interface, Evaluations
series	eCAADe
email
more	http://www.ulg.ac.be/lema/
last changed	2022/06/07 07:50

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6da7
authors	Bridges, Alan
year	1983
title	Course Description - University of Strathclyde - Msc In Building Science (Computer Aided Building Design)
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.40-I.51
doi	https://doi.org/10.52842/conf.ecaade.1983.x.v4x
summary	This paper describes a one-year postgraduate course in computer-aided building design. The course structure is outlined, together with the resources required to run such a course. Details of the course modules are given in an appendix.
keywords	Postgraduate Course, Computer-aided Building Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	cf2009_771
id	cf2009_771
authors	LaBelle, Guillaume; Nembrini, Julien and Huang, Jeffrey
year	2009
title	Programming framework for architectural design ANAR+: Object oriented geometry
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 771- 785
summary	From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The presented research explores the use of programming as explorative and reflexive medium (Schön, 1983) through the development of a programming framework for architectural design. Based on Java, the ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depend on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations.
keywords	Parametric design, programming language, architectural Geometry, pro-cessing
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	c87f
authors	Laing, L.
year	1983
title	Simulation of the Emergency Evacuation of Buildings in the Event of Fire
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.10-II.22
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t1l
summary	The paper describes an application of CAAD techniques by Final Year architecture students using the computer program AIR-Q to dynamically simulate the emergency evacuation of people from a multi-storey department store. This is presented in the context of a fire emergency and reference made to the local Building Regulations which govern the size and location of fire exits. It is suggested that the technique not only provides students and designers with an easily assimilated understanding of the consequences of design decisions but also allows alternative design solutions to be quickly compared in a search for the optional design strategy. The exercise also demonstrates, to the students, the logic behind the rules contained in the Fire Regulations while demonstrating possible weaknesses and inadequacies of the empirical approach that these regulations are constrained to adopt.
keywords	CAAD Techniques, Fire Regulations
series	eCAADe
last changed	2022/06/07 07:50

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6eaa
authors	O’Connell, Dermot
year	1983
title	An Educational Strategy for CAAD and its Implementation in a New System with a Sophisticated Interface
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.1-I.19
doi	https://doi.org/10.52842/conf.ecaade.1983.x.i0c
summary	Reasons are examined for the slower uptake of CAD in architecture than in engineering. An appropriate response to Computer-Aided Architectural Design is overdue from the educational sector. Schools of Architecture should put CAAD to the forefront in their plans, taking an ambitious long-term view and aiming for high-quality system design to anticipate the industry's drive to produce first-class equipment progressively more cheaply. Schools should press for changes in the way facilities are supplied to them. They should discard obsolete software, buy software commercially, stick to what they can do best, and plan for concomitant changes across the curriculum. A new CAAD system with the emphasis on the design interface being implemented in UCD School of Architecture is briefly described.
keywords	CAAD, System Design
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2013_023
id	cf2013_023
authors	Yun, Wu and Miyamoto Funito
year	2013
title	An Analysis of Backbone of Outer Spatial Morphology of Campus
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 23-37.
summary	The research is based on the theory of Space syntax (Hillier and Hanson, 1983). Just as the backbone is essential to compose the human body, two sorts of backbones of the outer spatial configuration of campus are proposed and defined in this thesis. The first is syntactically abstract, which is constituted with the axial lines to represent the relations between the buildings located in campus, and to characterize the essential spatial configuration of campus. The second is a road network which could be represented as a realistic backbone for human activities, and through which human get personal impression and knowledge of outer space of campus. Based on the concept of the backbone, several spatial patterns of campuses are explored and extracted, and the relationships with the spatial cognition and comprehension are quantitatively evaluated.
keywords	Backbone, Axial lines map, Road network, Space syntax, Spatial morphology, Space cognition.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	8d5e
authors	Hayes-Roth, Frederick, Waterman, Donald A. and Lenat, Douglas B. (editors)
year	1983
title	Building Expert System
source	vii, 444 p. : ill
summary	Reading,Mass.: Addison-Wesley Pub., 1983. 1: include bibliography: p. 405-420 -- (Teknowledge Series in Knowledge Engineering. Hayes-Roth, Frederick, series editor). This book is a collaboration of 38 expert system researchers and developers. It provides a broad introduction to the concepts and methods necessary for an understanding of how these systems work
keywords	AI, expert systems
series	CADline
last changed	2003/06/02 10:24

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	8b75
authors	Cullen, Ian
year	1983
title	Expert Systems in Architectural and Planning Education
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.1-IV.15
doi	https://doi.org/10.52842/conf.ecaade.1983.x.a7j
summary	The paper discusses the problems and possibilities of a project initiated recently within the Bartlett in the general area of knowledge engineering. The aim is to assemble a set of knowledge bases which may be explored interactively by students. The system will differ from traditional CAL packages in that it will be both problem oriented - designed to extract from the students the information required to reach a specific decision - and capable of providing an explanation of its approach at any point.
keywords	Knowledge Engineering
series	eCAADe
last changed	2022/06/07 07:50

_id	4b04
authors	De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year	1983
title	Proceedings of the International Conference eCAADe 1983
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
doi	https://doi.org/10.52842/conf.ecaade.1983
summary	In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels. The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series	eCAADe
email
more	http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed	2022/06/07 07:49

_id	0127
authors	Durand, Yves
year	1983
title	Perspective Drawings of Architectural Scenes Calculated by Fortranprograms which Make Use of Hidden Line Algorithms and "Solid Modeling" in APL for the Data Preparation.
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.36-III.69
doi	https://doi.org/10.52842/conf.ecaade.1983.x.x5q
summary	This paper gives an account of works recently undertaken by the Department of Architecture of Mons Polytechnic School (Belgium) about a program of computer-assisted design. That program, written in FORTRAN, has been elaborated with the object of drawing perspective architectural scenes on digital plotters or graphic printers and of eliminating hidden lines from these scenes. Two algorithms, that yield good results for automatic search of observer's position in terms of orientation and for the computation of hidden lines in case of numerous segments and opaque surfaces, are presented. Some graphic examples are provided. An algorithm of previous classifying of segments and opaque surfaces is propounded. The precision of calculations and the magnitude of tolerances for parametric operations of comparison are discussed. The use of APL to introduce, modify or correct data is approached; in this way, a survey of potential application of APL for solid modeling is suggested.
keywords	Computer-assisted Design, FORTRAN
series	eCAADe
more	http://www.fpms.ac.be
last changed	2022/06/07 07:50

_id	8e9b
authors	Foque, R. and Hashimshony, R.
year	1983
title	Experience of a Design Exercise, Making Use of the Programs: Goal, Bible & Gloss (Developed by Abacus)
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.1-II.9
doi	https://doi.org/10.52842/conf.ecaade.1983.x.m4v
summary	A 6 weeks (2 days a week) design exercise, making use of the above programs, was held the last bimester in the Faculty of Architecture in TH Delft. This exercise was an experimental one for the students, as well as for the teachers. As the exercise had an experimental character, it is clear that a lot should be learned from that experience, both from its positive and negative outcomes. The paper will try to evaluate on this point for the benefit of those intending to set up similar projects.
keywords	Experimental Exercise
series	eCAADe
last changed	2022/06/07 07:50

_id	620a
authors	Galle, Per
year	1983
title	A Theorem Relating to Exhaustive Generation of Floor Plans
source	Bulletin of Computer Aided Architectural Design. May, 1983. pp. 30-33 : ill
summary	Many problems arise in connection with automated design of architectural floor plans. If modular grids are used, one problem is to avoid repeated generation of the same plan on different modular grids. Using the concept of 'modular complexity,' the paper presents and proves a theorem which offers a solution to this problem
keywords	automation, design, planning, architecture, floor plans, grids, search, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	610b
authors	Hall, R.N.
year	1983
title	The Use of Gable OMS (Object Modelling System) in the Building Design ProcessThe Use of Gable OMS (Object Modelling System) in the Building Design Process
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.1-III.18
doi	https://doi.org/10.52842/conf.ecaade.1983.x.b6t
summary	GABLE CAD SYSTEMS comprise a suite of integrated sub-systems, one of which is OMS. The use of OMS in the development of a building design enables three dimensional graphical modelling of objects associated with buildings. Thus furniture, fittings and fixtures may be located within any room in a building or outside a building or in relation to other groups of objects unrelated to a building. Once located, objects and building may be seen in 2D plan and elevation/section projection or 3D projection (perspectives, axonometrics, isometrics, etc.). In this way furniture, people, cars, trees,landscape objects may all be modelled and graphically represented in addition to the modelling capabilities enabled using GABLE BMS (Building Modelling System). These graphically represented 2D and 3D views of objects can then be passed into GABLE IDS for further embellishment, annotation or dimensioning to produce detailed working drawings.
keywords	Three Dimensional Graphical Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	6259
authors	Kalay, Yehuda E. and Majkowski, Bruce R.
year	1990
title	CAD Technology Transfer: A Case Study
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
doi	https://doi.org/10.52842/conf.acadia.1990.133
summary	Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

For more results click below: