Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 100

Reformat results as: short short into frame detailed detailed into frame

_id	620a
authors	Galle, Per
year	1983
title	A Theorem Relating to Exhaustive Generation of Floor Plans
source	Bulletin of Computer Aided Architectural Design. May, 1983. pp. 30-33 : ill
summary	Many problems arise in connection with automated design of architectural floor plans. If modular grids are used, one problem is to avoid repeated generation of the same plan on different modular grids. Using the concept of 'modular complexity,' the paper presents and proves a theorem which offers a solution to this problem
keywords	automation, design, planning, architecture, floor plans, grids, search, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	8d59
authors	Andersen, J.M.
year	1983
title	CAD in Architectural Practice
source	Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary	A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords	computer graphics, HVAC, applications, practice, architecture
series	CADline
last changed	2003/06/02 13:58

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4b04
authors	De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year	1983
title	Proceedings of the International Conference eCAADe 1983
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
doi	https://doi.org/10.52842/conf.ecaade.1983
summary	In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels. The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series	eCAADe
email
more	http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed	2022/06/07 07:49

_id	6259
authors	Kalay, Yehuda E. and Majkowski, Bruce R.
year	1990
title	CAD Technology Transfer: A Case Study
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
doi	https://doi.org/10.52842/conf.acadia.1990.133
summary	Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cf2009_771
id	cf2009_771
authors	LaBelle, Guillaume; Nembrini, Julien and Huang, Jeffrey
year	2009
title	Programming framework for architectural design ANAR+: Object oriented geometry
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 771- 785
summary	From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The presented research explores the use of programming as explorative and reflexive medium (Schön, 1983) through the development of a programming framework for architectural design. Based on Java, the ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depend on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations.
keywords	Parametric design, programming language, architectural Geometry, pro-cessing
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	cf2009_poster_25
id	cf2009_poster_25
authors	Nembrini, Julien; Guillaume Labelle, Nathaniel Zuelzke, Mark Meagher and Jeffrey Huang
year	2009
title	Source Studio: Teaching Programming For Architectural Design
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	The architectural studio framework presented here is based on the use of programming as central form generation reflexive medium (Schon, 1983). Its aim is to teach architectural design while introducing a different approach toward computer tools by enabling students to fully explore variations in their designs through the use of coding for form definition. It proposes the students to reflect on their design process through its confrontation to algorithmic formalization (Mitchell 1990). This results in exercising the synthetic re-thinking of their initial sketch intents to comply with the difficult task of fitting the language syntax. With the proliferation and constant replacement of computer tools among the architectural practice, a shift appears in the attitude towards introducing students to different tools: studio teaching is branded by specific software platforms advocated by the teaching team. A lack of generalized view, independent of commercial CAD software, is problematic for the definition of new teaching tools suited for this constantly evolving situation (Terzidis, 2006).
keywords	Programming, studio teaching, scripting, parametric design
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	4491
authors	Bouyat, M., H. Botta and Vignat, J. C.
year	1983
title	VERDI : A Computer Aided Design System for Development and City Planning
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 382-385 : ill. includes bibliography
summary	The system presented is a CAD system for use in planning road and other facility networks. Taking a draft master plan as its point of departure the system makes it possible: (1) To plan in a dynamic fashion since it permits the back-and-forth study of the interconnections between the design of the master plan and network design; (2) to preserve, from one work session to another, data that has already been acquired and calculated; (3) to make relevant technical evaluations in the following three fields: earthworks, roads, and sewage networks
keywords	CAD, urban planning, applications
series	CADline
last changed	2003/06/02 13:58

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	cb5f
authors	Kant, Elaine and Newell, Allen
year	1983
title	An Automatic Algorithm Designer : An Initial Implementation
source	Design Research Center, CMU, May, 1983. 10 p. includes bibliography
summary	This paper outlines a specification for an algorithm-design system (based on previous work involving protocol analysis) and describes an implementation of the specification that is a combination frame and production system. In the implementation, design occurs in two problem spaces: one about algorithms and one about the task domain. The partially worked out algorithms are represented as configurations of data-flow components. A small number of general purpose operators construct and modify the representations. These operators are adapted to different situations by instantiation and means-ends analysis rules. The data-flow space also includes symbolic and test-case execution rules that drive the component-refinement process by exposing both problems and opportunities. A domain space about geometric images supports test-case execution, domain-specific problem solving, recognition and discovery
keywords	algorithms, design, systems, synthesis, automation, protocol analysis, frames, discovery, problem solving
series	CADline
last changed	2003/06/02 13:58

_id	4843
authors	Lee, Y.C. and Fu, K.S.
year	1983
title	Integration of Solid Modeling and Data Base Management for CAD/CAM
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 367-373 : ill
summary	For the fast growing CAD/CAM technologies, geometric solid modeling plays one of the most important roles. In order to satisfy a variety of engineering applications, an integrated database management system based on solid modeling is highly desirable. In the proposed approach, a concise object representation scheme, Constructive Solid Geometry (CSG), is adopted as the basis for database design. The underlying generic relational model is found to be more adequate than the conventional relational model in characterizing the embedded data abstraction. A systematic method is devised for converting the CSG scheme into a generic model based on the BNF grammar which depicts the CSG scheme. A relational query language, SEQUEL, has been modified to define, control, and manipulate the flat relations which represent the highly structural generic model
keywords	integration, CSG, relational database, management, solid modeling, CAD, CAM
series	CADline
last changed	2003/06/02 13:58

_id	20d4
id	20d4
authors	Sequin, Carlo H. and P.S. Strauss
year	1983
title	UNIGRAFIX
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 374-381 : ill. includes bibliography.
summary	UNIGRAFIX is a three-dimensional graphics modeling environment that runs under the UNIX operating system. It comprises a terse, human-readable descriptive language that allows scene files of complex objects to be created with little overhead. These scenes can be used as input to a set of UNIGRAFIX programs which can be run either as separate functional units, or from within the interactive UNIGRAFIX environment. Programs are available to transform and illuminate the scene descriptions and to display them in a variety of styles on various output devices. The built-in hidden-face and hidden-line elimination routines use a scan- line algorithm which makes strong use of scan-line coherence as well as object coherence.
series	CADline
type	normal paper
last changed	2005/10/05 07:42

_id	6e1a
authors	Tokumasu, Shinji, Kunitomo, Yoshio and Ohta, Yosimi (et al)
year	1983
title	Solid Model in Geometric Modeling System : HICAD
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 360-366 : ill. includes bibliography
summary	The geometric modeling system plays an important role in CAD for mechanical engineering. This paper presents the general purposed conversational geometric modeling system HICAD, which has been developed to confirm the integrated CAD. The HICAD is a generalized geometric model which includes three of the typical geometric modelling, i.e., the implementation method of solid model is especially discussed with the summary of whole system
keywords	solid modeling, geometric modeling, CAD
series	CADline
last changed	2003/06/02 13:58

_id	8beb
authors	Tomkinson, James H.
year	1983
title	UCAD : Building Design Automation with General Purpose Software Tools on UNIX
source	ACM IEEE Design Automation Conference proceedings (20th : 1983 : Miami Beach, Florida). pp. 774-787 : ill. includes bibliography: p. 778
summary	This paper describes a unique approach to a successful Design Automation System. It is an evolutionary approach, building on flexible, general purpose UNIX software tools. It is useful in such areas of design as circuit schematics, custom IC, backplanes, software code generation, building space management, music composition and many others. Examples from two year design automation effort known as UCAD are included
keywords	design, automation, software, UNIX, CAD, applications
series	CADline
last changed	2003/06/02 13:58

_id	808b
authors	Wyleczuk, Rosanne, Meyer, Lynn and Babcock, Gigi
year	1983
title	The Transfer of University Software for Industry Use
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 756-760. includes bibliography
summary	Computer-aided engineering software is generated in abundance in educational institutions. As a major source of design automation software, universities have a lot to offer: a progressive research environment; a seemingly inexhaustible supply of software engineers in the form of undergraduates, graduate engineers, and professors; and a no-risk, multi- disciplinary design lab for experimentation. For these reasons, university software is being widely sought for use in production/commercial environments. This paper examines the interface between industry and the universities during the transfer of design automation software. A printed circuit board router, a graphics subroutine library, and a circuit simulation program are used to illustrate issues arising from the technology transfer. Guidelines to increase the likelihood of success in such transfers of software are provided
keywords	industry, engineering, software, CAE, education, technology, communication
series	CADline
last changed	2003/06/02 13:58

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2009.357
wos	WOS:000334282200043
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	86cb
authors	Bell, John
year	1983
title	Designers Get the Picture
source	New Scientist March, 1983. pp. 815-[822] : col. ill.
summary	One firm that had installed a CAD system is the Somerset Shoemaker Clarks Ltd. It took four years to develop the software that was developed by CADCenter in Cambridge. The article describes the program and the process of shoemaking
keywords	CAD, practice, engineering
series	CADline
last changed	1999/02/12 15:07

_id	213d
authors	Bernard, Yves and Dupagne, Albert
year	1983
title	Volume: a computer Program for building Modelisation and Manipulation
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.70-III.79
doi	https://doi.org/10.52842/conf.ecaade.1983.x.n2m
summary	We describe a computer program VOLUME for interactive 3D modelling of building which can be used in many problems (heat losses calculations, architectural evaluation, ...) where a geometric representation is required. The program is more than a tool to input a geometry: it is also a tool for design; manipulations are very easy and many design solutions can be tried. We then discuss about developments for improving the quality of that tool in the design process.
keywords	Computer Aided Design, 3D Modelling, Computer-user Interface, Evaluations
series	eCAADe
email
more	http://www.ulg.ac.be/lema/
last changed	2022/06/07 07:50

_id	2e0a
authors	Besant, C.B.
year	1983
title	Computer-Aided Design and Manufacture. -- 2nd. ed
source	232 p. : ill. Chicester [West Sussex], New York: Halsted Press, 1983. includes bibliography and index -- (Ellis Horwood Series in Engineering Science)
summary	An introduction to computing as an aid to design and manufacture. Provides description of hardware and software of CAD systems, discusses their use in engineering drafting
keywords	drafting, hardware, software, CAD, CAM, practice
series	CADline
last changed	2003/06/02 13:58

For more results click below: