Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 114

Reformat results as: short short into frame detailed detailed into frame

_id	4491
authors	Bouyat, M., H. Botta and Vignat, J. C.
year	1983
title	VERDI : A Computer Aided Design System for Development and City Planning
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 382-385 : ill. includes bibliography
summary	The system presented is a CAD system for use in planning road and other facility networks. Taking a draft master plan as its point of departure the system makes it possible: (1) To plan in a dynamic fashion since it permits the back-and-forth study of the interconnections between the design of the master plan and network design; (2) to preserve, from one work session to another, data that has already been acquired and calculated; (3) to make relevant technical evaluations in the following three fields: earthworks, roads, and sewage networks
keywords	CAD, urban planning, applications
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	0127
authors	Durand, Yves
year	1983
title	Perspective Drawings of Architectural Scenes Calculated by Fortranprograms which Make Use of Hidden Line Algorithms and "Solid Modeling" in APL for the Data Preparation.
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.36-III.69
doi	https://doi.org/10.52842/conf.ecaade.1983.x.x5q
summary	This paper gives an account of works recently undertaken by the Department of Architecture of Mons Polytechnic School (Belgium) about a program of computer-assisted design. That program, written in FORTRAN, has been elaborated with the object of drawing perspective architectural scenes on digital plotters or graphic printers and of eliminating hidden lines from these scenes. Two algorithms, that yield good results for automatic search of observer's position in terms of orientation and for the computation of hidden lines in case of numerous segments and opaque surfaces, are presented. Some graphic examples are provided. An algorithm of previous classifying of segments and opaque surfaces is propounded. The precision of calculations and the magnitude of tolerances for parametric operations of comparison are discussed. The use of APL to introduce, modify or correct data is approached; in this way, a survey of potential application of APL for solid modeling is suggested.
keywords	Computer-assisted Design, FORTRAN
series	eCAADe
more	http://www.fpms.ac.be
last changed	2022/06/07 07:50

_id	8e9b
authors	Foque, R. and Hashimshony, R.
year	1983
title	Experience of a Design Exercise, Making Use of the Programs: Goal, Bible & Gloss (Developed by Abacus)
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.1-II.9
doi	https://doi.org/10.52842/conf.ecaade.1983.x.m4v
summary	A 6 weeks (2 days a week) design exercise, making use of the above programs, was held the last bimester in the Faculty of Architecture in TH Delft. This exercise was an experimental one for the students, as well as for the teachers. As the exercise had an experimental character, it is clear that a lot should be learned from that experience, both from its positive and negative outcomes. The paper will try to evaluate on this point for the benefit of those intending to set up similar projects.
keywords	Experimental Exercise
series	eCAADe
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	1247
authors	Hasell, Mary Joyce
year	1983
title	Gaming Simulation: A Communication Tool for Architects and Designers
source	University of Michigan
summary	In today's technological society, people spend more and more time in built environments that they have little or no control in shaping. There is also a large gap in communication between designers of the built environment and non-designers. The language that non-designers use to communicate specific spatial needs, whether aesthetic or functional, is different from the formal language that designers use to communicate these issues with each other. Gaming simulation, as a communication tool, has a number Note of characteristics that make it useful for improving communication and increasing participation among designers and non-designers. In this study, a method of teaching the design of gaming simulation to designers of the built environment is developed. This method includes a Game Design Index or cataloging system of gaming tehniques, within the context of a game design process. A questionnaire was used to interview the designers of the most current physical design games about the gaming techniques in their games. Their answers were organized into the Game Design Index and set within the context of a process for designing a game. This process was tested by teaching a course to graduate students in Urban Planning and Architecture. Further testing was done by holding a game design workshop for professional architects. The findings indicate that it is possible to analyze existing games for their gaming techniques and to index them in an organized way. It is also possible to add this index to an existing game design process. By using this process, graduate students were able to design gaming simulations of high quality, although professionals who attended a day-and-a-half workshop, were not so successful. This latter problem was primarily the result of the complexity of the task and the time constraint imposed. This dissertation describes the game design process that was used to teach neophytes to design games as well as the Game Design Indexes for ten existing games. A comprehensive review of games concerned with physical design is included
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c87f
authors	Laing, L.
year	1983
title	Simulation of the Emergency Evacuation of Buildings in the Event of Fire
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.10-II.22
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t1l
summary	The paper describes an application of CAAD techniques by Final Year architecture students using the computer program AIR-Q to dynamically simulate the emergency evacuation of people from a multi-storey department store. This is presented in the context of a fire emergency and reference made to the local Building Regulations which govern the size and location of fire exits. It is suggested that the technique not only provides students and designers with an easily assimilated understanding of the consequences of design decisions but also allows alternative design solutions to be quickly compared in a search for the optional design strategy. The exercise also demonstrates, to the students, the logic behind the rules contained in the Fire Regulations while demonstrating possible weaknesses and inadequacies of the empirical approach that these regulations are constrained to adopt.
keywords	CAAD Techniques, Fire Regulations
series	eCAADe
last changed	2022/06/07 07:50

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ecaade2007_114
id	ecaade2007_114
authors	Olmos, Francisco
year	2007
title	Training Programs for Art and Design Learning in the Virtual Studio
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 639-646
doi	https://doi.org/10.52842/conf.ecaade.2007.639
summary	Computers are very common drawing tools at university design studios but their potential as training tools in arts and design has not been explored in depth. In arts and design the learning process is based on ‘knowing in action’ (Schön 1983). Therefore, training is the keystone of the learning process in arts and design. This action takes the form of a reflective practice based on the manipulation of a media where each media has its own possibilities, its own limits in communicating design ideas or artistic concepts. With the introduction of digital media in the design studio, it is expected that reflective practices in design learning will experience a qualitative change. However, currently there is little understanding of how to use the digital and virtual media in a design studio as a learning tool (Szalapaj 2001), nor of the use of design training programs. In this paper the use of training programs in an experimental design course at a university level, is discussed. This experience was carried out as a PhD research experiment at the Faculty of Architecture and Arts of the Universidad de Los Andes in Merida, Venezuela. The training programs discussed here were designed for an eight week introductory design course in a virtual design studio. The programs were written in VRML and conceived as a virtual design training environment. Each program was designed for a specific design exercise, based on a learning strategy and an interactivity model proposed for object manipulation in design training. A comparative analysis of the data gathered from the course was made of training exercises done with a Cad program and with the training programs and crossing information with other sources. The experiment shows that the training programs, their learning strategy and the interactivity model proposed were successful in guiding the scope of the design exercises during the training process.
keywords	E-learning, virtual studio, design training, virtual environment
series	eCAADe
email
last changed	2022/06/07 08:00

_id	6eaa
authors	O’Connell, Dermot
year	1983
title	An Educational Strategy for CAAD and its Implementation in a New System with a Sophisticated Interface
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.1-I.19
doi	https://doi.org/10.52842/conf.ecaade.1983.x.i0c
summary	Reasons are examined for the slower uptake of CAD in architecture than in engineering. An appropriate response to Computer-Aided Architectural Design is overdue from the educational sector. Schools of Architecture should put CAAD to the forefront in their plans, taking an ambitious long-term view and aiming for high-quality system design to anticipate the industry's drive to produce first-class equipment progressively more cheaply. Schools should press for changes in the way facilities are supplied to them. They should discard obsolete software, buy software commercially, stick to what they can do best, and plan for concomitant changes across the curriculum. A new CAAD system with the emphasis on the design interface being implemented in UCD School of Architecture is briefly described.
keywords	CAAD, System Design
series	eCAADe
last changed	2022/06/07 07:50

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2009.357
wos	WOS:000334282200043
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2387
authors	Akin, Omer, Baykan, Can D. and Rao, Radha D.
year	1983
title	Searching in the UNIX Directory
source	December, 1983. 19 p. : ill., tables. includes bibliography
summary	The structure of the directory space and subjects search behaviors in the UNIX operating system environment are examined. Protocol analysis with two subjects and survey of the contents of the directory space of all users of E-VAX and X-VAX systems in the Architecture and Computer Science Systems at Carnegie Mellon University were conducted. Depth first search characterized both the organization of the directories and the behavior of the subjects. Single step as opposed to multiple step traversal of the directory tree was also prevalent in the subject`s behaviors. Recommendations for system friendliness, in term of reusability, orientation, robustness, and consistency are developed
keywords	UNIX, user interface, protocol analysis
series	CADline
email
last changed	2003/06/02 13:58

_id	e118
authors	Balas, Egon
year	1983
title	Disjunctive Programming and a Hierarchy of Relaxations for Discrete Optimization Problems
source	December, 1983. 38 p. : ill. includes bibliography
summary	The author discuss a new conceptual framework for the convexification of discrete optimization problems, and a general technique for obtaining approximations to the convex hull of the feasible set. The concepts come from disjunctive programming and the key tool is a description of the convex hull of a union of polyhedra in terms of a higher dimensional polyhedron. Although this description was known for several years, only recently was it shown by Jeroslow and Lowe to yield improved representations of discrete optimization problems. The author expresses the feasible set of a discrete optimization problem as the intersection (conjunction) of unions of polyhedra, and define an operation that takes one such expression into another, equivalent one, with fewer conjuncts. He then introduces a class of relaxations based on replacing each conjunct (union of polyhedra) by its convex hull. The strength of the relaxations increases as the number of conjuncts decreases, and the class of relaxations forms a hierarchy that spans the spectrum between the common linear programming relaxation, and the convex hull of the feasible set itself. Instances where this approach presents advantages include critical path problems in disjunctive graphs, network synthesis problems, certain fixed charge network flow problems, etc. The approach on the first of these problems is illustrated, which is a model for machine sequencing
keywords	polyhedra, computational geometry, optimization, programming, convex hull, graphs
series	CADline
last changed	1999/02/12 15:07

_id	0000
authors	Bijl, Aart
year	1983
title	Know Your Technology - Or: Can Computers Understand Designers?
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. V.1-V.11
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t5s
summary	Any great expansion of the population of computer users, embracing architects and other ordinary people, will happen only if we change from current computing technology to radically new software technology. Criteria for new technology are discussed, with reference to inadequacies of current technology; we should strive for computers that can understand people. Logic programming is described as one development towards this goal, illustrated by the example of Prolog serving as interpreter of user demands and supporting partial and changing logical models of user activity. Architects can choose computing options now that will put them on a path leading to future new technology. Choice is explained, favouring a software environment that is used by researchers and also supports immediate and practical computer applications. Lessons are drawn for architectural education, to prepare for change that will take place during a student's 40-year working life.
keywords	Software Technology, Logic Programming
series	eCAADe
last changed	2022/06/07 07:50

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	0f34
authors	Brown, P.J.
year	1983
title	Error Messages : The Neglected Area of the Man / Machine Interface?
source	communications of the ACMò. April, 1983. vol. 26: pp. 246-249. includes bibliography
summary	The quality of error messages produced by software used in the field was tested by a simple experiment; it was found to be far from adequate. The results of the experiment are analyzed, and some responses which tend to corroborate the original findings are discussed. Finally some suggestions are made for improving the quality of error messages
keywords	reliability, user interface, software, management
series	CADline
last changed	2003/06/02 13:58

_id	6647
authors	Buxton, W., M.R. Lamb and Sherman, D. (et al)
year	1983
title	Towards a Comprehensive User Interface Management System
source	computer Graphics. July, 1983. vol. 17: pp. 35-42 : ill. includes bibliography
summary	A UIMS developed at the University of Toronto is presented. The system has two main components. The first is a set of tools to support the design and implementation of interactive graphics programs. The second is a run-time support package which handles interactions between the system and the user (things such as hit detection, event detection, screen updates, and procedure invocation), and provides facilities for logging user interactions for later protocol analysis. The design / implementation tool is a preprocessor, called MENULAY, which permits the applications programmer to use interactive graphics techniques to design graphics menus and their functionality. The output of this preprocessor is high- level code which can be compiled with application-specific routines. User interactions with the resulting executable module are then handled by the run-time support package. The presentation works through an example from design to execution in a step-by-step manner
keywords	software, user interface, management, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	8b75
authors	Cullen, Ian
year	1983
title	Expert Systems in Architectural and Planning Education
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.1-IV.15
doi	https://doi.org/10.52842/conf.ecaade.1983.x.a7j
summary	The paper discusses the problems and possibilities of a project initiated recently within the Bartlett in the general area of knowledge engineering. The aim is to assemble a set of knowledge bases which may be explored interactively by students. The system will differ from traditional CAL packages in that it will be both problem oriented - designed to extract from the students the information required to reach a specific decision - and capable of providing an explanation of its approach at any point.
keywords	Knowledge Engineering
series	eCAADe
last changed	2022/06/07 07:50

_id	e7b8
authors	Dahl, Veronica
year	1983
title	Logic Programming as a Representation of Knowledge
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 106-110 : ill. includes bibliography
summary	Logic has traditionally provided a firm conceptual framework for representing knowledge. As it can formally deal with the notion of logical consequence, the introduction of Prolog has made it possible to represent knowledge in terms of logic and also to expect appropriate inferences to be drawn from it automatically. This article illustrates and explores these ideas with respect to two central representational issues: problem solving knowledge and database knowledge. The technical aspects of both subjects have been covered elsewhere (Kowalski, R. Logic for problem solving, North- Holland pub. 1979 ; Dahl, V. on database system development through logic ACM Trans.vol.7/no.3/Mar.1982 pp.102). This explanation uses simple, nontechnical terms
keywords	PROLOG, knowledge, representation, logic, programming, problem solving, database
series	CADline
last changed	1999/02/12 15:08

For more results click below: