Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 73

Reformat results as: short short into frame detailed detailed into frame

_id	8e9b
authors	Foque, R. and Hashimshony, R.
year	1983
title	Experience of a Design Exercise, Making Use of the Programs: Goal, Bible & Gloss (Developed by Abacus)
doi	https://doi.org/10.52842/conf.ecaade.1983.x.m4v
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.1-II.9
summary	A 6 weeks (2 days a week) design exercise, making use of the above programs, was held the last bimester in the Faculty of Architecture in TH Delft. This exercise was an experimental one for the students, as well as for the teachers. As the exercise had an experimental character, it is clear that a lot should be learned from that experience, both from its positive and negative outcomes. The paper will try to evaluate on this point for the benefit of those intending to set up similar projects.
keywords	Experimental Exercise
series	eCAADe
last changed	2022/06/07 07:50

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	49a8
authors	McCall, R., Fischer, G. and Morch, A.
year	1990
title	Supporting Reflection-in-Action in the Janus Design Environment
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 247-259
summary	We have developed a computer-based design aid called Janus, which is based on a model of computer-supported design that we think has significance for the future of architectural education. Janus utilizes a knowledge-based approach to link a graphic construction system to hypertext. This allows the computer to make useful comments on the solutions that students construct in a CAD-like environment. These comments contain information intended to make students think more carefully about what they are doing while they are doing it. In other words, Janus promotes what Donald Schon has called "reflection-inaction" (Schon, 1983). The Janus design environment is named for the Roman god with a pair of faces looking in opposite directions. In our case the faces correspond to complementary design activities we call construction and argumentation. Construction is the activity of graphically creating the form of the solution e.g., a building. Traditionally this has been done with tracing paper, pencils, and pens. Argumentation is the activity of reasoning about the problem and its solution. This includes such things as considering what to do next, what alternative courses of action are available, and which course of action to choose. Argumentation is mostly verbal but partly graphical.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8d59
authors	Andersen, J.M.
year	1983
title	CAD in Architectural Practice
source	Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary	A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords	computer graphics, HVAC, applications, practice, architecture
series	CADline
last changed	2003/06/02 13:58

_id	e10e
authors	Billon, R. and Rocca, R.
year	1983
title	Comprendre KEOPS: Logiciel de conception assistee par ordinateur en architecture
doi	https://doi.org/10.52842/conf.ecaade.1983.x.s9f
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.19-III.35
summary	En informatique graphique, la méthode la plus courante pour saisir un bâtiment consiste à dêcrire et à stocker en base de données les "pleins": les murs, planchers, composants. Cette procédure est vite fastidieuse, et ne permet pas réellement une véritable conception assistée par ordinateur. KEOPS expérimente une autre méthode qui consiste à décrire l'esquisse par ses "vides", c'est-à-dire les volumes des locaux en trois dimensions. Le logiciel opère automatiquement la transformation "filaire" en composants et ouvrages du bâtiment en exploitant un savoir technologique. Le benéfice? La réduction spectaculaire du temps de saisie et un logiciel de C.A.O. enfin opérationnel en bâtiment.
series	eCAADe
more	http://www.marseille.archi.fr
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0127
authors	Durand, Yves
year	1983
title	Perspective Drawings of Architectural Scenes Calculated by Fortranprograms which Make Use of Hidden Line Algorithms and "Solid Modeling" in APL for the Data Preparation.
doi	https://doi.org/10.52842/conf.ecaade.1983.x.x5q
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.36-III.69
summary	This paper gives an account of works recently undertaken by the Department of Architecture of Mons Polytechnic School (Belgium) about a program of computer-assisted design. That program, written in FORTRAN, has been elaborated with the object of drawing perspective architectural scenes on digital plotters or graphic printers and of eliminating hidden lines from these scenes. Two algorithms, that yield good results for automatic search of observer's position in terms of orientation and for the computation of hidden lines in case of numerous segments and opaque surfaces, are presented. Some graphic examples are provided. An algorithm of previous classifying of segments and opaque surfaces is propounded. The precision of calculations and the magnitude of tolerances for parametric operations of comparison are discussed. The use of APL to introduce, modify or correct data is approached; in this way, a survey of potential application of APL for solid modeling is suggested.
keywords	Computer-assisted Design, FORTRAN
series	eCAADe
more	http://www.fpms.ac.be
last changed	2022/06/07 07:50

_id	620a
authors	Galle, Per
year	1983
title	A Theorem Relating to Exhaustive Generation of Floor Plans
source	Bulletin of Computer Aided Architectural Design. May, 1983. pp. 30-33 : ill
summary	Many problems arise in connection with automated design of architectural floor plans. If modular grids are used, one problem is to avoid repeated generation of the same plan on different modular grids. Using the concept of 'modular complexity,' the paper presents and proves a theorem which offers a solution to this problem
keywords	automation, design, planning, architecture, floor plans, grids, search, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	1247
authors	Hasell, Mary Joyce
year	1983
title	Gaming Simulation: A Communication Tool for Architects and Designers
source	University of Michigan
summary	In today's technological society, people spend more and more time in built environments that they have little or no control in shaping. There is also a large gap in communication between designers of the built environment and non-designers. The language that non-designers use to communicate specific spatial needs, whether aesthetic or functional, is different from the formal language that designers use to communicate these issues with each other. Gaming simulation, as a communication tool, has a number Note of characteristics that make it useful for improving communication and increasing participation among designers and non-designers. In this study, a method of teaching the design of gaming simulation to designers of the built environment is developed. This method includes a Game Design Index or cataloging system of gaming tehniques, within the context of a game design process. A questionnaire was used to interview the designers of the most current physical design games about the gaming techniques in their games. Their answers were organized into the Game Design Index and set within the context of a process for designing a game. This process was tested by teaching a course to graduate students in Urban Planning and Architecture. Further testing was done by holding a game design workshop for professional architects. The findings indicate that it is possible to analyze existing games for their gaming techniques and to index them in an organized way. It is also possible to add this index to an existing game design process. By using this process, graduate students were able to design gaming simulations of high quality, although professionals who attended a day-and-a-half workshop, were not so successful. This latter problem was primarily the result of the complexity of the task and the time constraint imposed. This dissertation describes the game design process that was used to teach neophytes to design games as well as the Game Design Indexes for ten existing games. A comprehensive review of games concerned with physical design is included
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c87f
authors	Laing, L.
year	1983
title	Simulation of the Emergency Evacuation of Buildings in the Event of Fire
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t1l
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.10-II.22
summary	The paper describes an application of CAAD techniques by Final Year architecture students using the computer program AIR-Q to dynamically simulate the emergency evacuation of people from a multi-storey department store. This is presented in the context of a fire emergency and reference made to the local Building Regulations which govern the size and location of fire exits. It is suggested that the technique not only provides students and designers with an easily assimilated understanding of the consequences of design decisions but also allows alternative design solutions to be quickly compared in a search for the optional design strategy. The exercise also demonstrates, to the students, the logic behind the rules contained in the Fire Regulations while demonstrating possible weaknesses and inadequacies of the empirical approach that these regulations are constrained to adopt.
keywords	CAAD Techniques, Fire Regulations
series	eCAADe
last changed	2022/06/07 07:50

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8892
authors	Maver, T.W.
year	1983
title	CAAD in Onderwijs en Onderzoek [CAAD in Teaching and Design]
source	Proceedings of THE-CAAD3 Symposium, Eindhoven
summary	Students currently in schools of architecture will be at the peak of their careers around the year 2000. The pressure on the schools to provide an education and training which will stand the student in good stead between now and then is considerable. In an increasing number of departments of architecture and building science, importance is being placed on the concept of modelling: i.e. the development and use of models of the operational behaviour and aesthetic character of design proposals which will allow appraisal of how real buildings will performing the real world.
series	other
email
last changed	2003/06/08 23:01

_id	ecaade2013_139
id	ecaade2013_139
authors	Mendes, Leticia Teixeira; Beirão, José Nuno; Duarte, José Pinto and Celani, Gabriela
year	2013
title	A Bottom-Up Social Housing System Described with Shape Grammars
doi	https://doi.org/10.52842/conf.ecaade.2013.2.705
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 705-714
summary	This paper presents the analysis of a bottom-up design system using shape grammars. This research is part of a larger study that proposes the development of a generic grammar to improve the quality of site development in social housing plans, including the improvement of their public spaces. We show the use of shape grammars as an analytical method to study the design of Belapur social housing development, designed by Charles Correa, in 1983.
wos	WOS:000340643600073
keywords	Design methodology; shape grammar; analytical grammar; low-income housing.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2009_poster_43
id	cf2009_poster_43
authors	Oh, Yeonjoo; Ellen Yi-Luen Do, Mark D Gross, and Suguru Ishizaki
year	2009
title	Delivery Types And Communication Modalities In The Flat-Pack Furniture Design Critic
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	A computer-based design critiquing system analyzes a proposed solution and offers critiques (Robbins 1998). Critiques help designers identify problems as well as opportunities to improve their designs. Compared with human critics, today’s computer-based critiquing systems deliver feedback in quite restricted manner. Most systems provide only negative evaluations in text; whereas studio teachers critique by interpreting the student’s design, introducing new ideas, demonstrating and giving examples, and offering evaluations (Bailey 2004; Uluoglu 2000) using speech, writing, and drawing to communicate (Anthony 1991; Schön 1983). This article presents a computer-based critiquing system, Flat-pack Furniture Design Critic (FFDC). This system supports multiple delivery types and modalities, adapting the typical system architecture of constraint-based intelligent tutors (Mitrovic et al. 2007).
keywords	Critiquing system, design critiquing
series	CAAD Futures
type	poster
email
last changed	2009/07/08 22:12

_id	ecaade2007_114
id	ecaade2007_114
authors	Olmos, Francisco
year	2007
title	Training Programs for Art and Design Learning in the Virtual Studio
doi	https://doi.org/10.52842/conf.ecaade.2007.639
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 639-646
summary	Computers are very common drawing tools at university design studios but their potential as training tools in arts and design has not been explored in depth. In arts and design the learning process is based on ‘knowing in action’ (Schön 1983). Therefore, training is the keystone of the learning process in arts and design. This action takes the form of a reflective practice based on the manipulation of a media where each media has its own possibilities, its own limits in communicating design ideas or artistic concepts. With the introduction of digital media in the design studio, it is expected that reflective practices in design learning will experience a qualitative change. However, currently there is little understanding of how to use the digital and virtual media in a design studio as a learning tool (Szalapaj 2001), nor of the use of design training programs. In this paper the use of training programs in an experimental design course at a university level, is discussed. This experience was carried out as a PhD research experiment at the Faculty of Architecture and Arts of the Universidad de Los Andes in Merida, Venezuela. The training programs discussed here were designed for an eight week introductory design course in a virtual design studio. The programs were written in VRML and conceived as a virtual design training environment. Each program was designed for a specific design exercise, based on a learning strategy and an interactivity model proposed for object manipulation in design training. A comparative analysis of the data gathered from the course was made of training exercises done with a Cad program and with the training programs and crossing information with other sources. The experiment shows that the training programs, their learning strategy and the interactivity model proposed were successful in guiding the scope of the design exercises during the training process.
keywords	E-learning, virtual studio, design training, virtual environment
series	eCAADe
email
last changed	2022/06/07 08:00

_id	6eaa
authors	O’Connell, Dermot
year	1983
title	An Educational Strategy for CAAD and its Implementation in a New System with a Sophisticated Interface
doi	https://doi.org/10.52842/conf.ecaade.1983.x.i0c
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.1-I.19
summary	Reasons are examined for the slower uptake of CAD in architecture than in engineering. An appropriate response to Computer-Aided Architectural Design is overdue from the educational sector. Schools of Architecture should put CAAD to the forefront in their plans, taking an ambitious long-term view and aiming for high-quality system design to anticipate the industry's drive to produce first-class equipment progressively more cheaply. Schools should press for changes in the way facilities are supplied to them. They should discard obsolete software, buy software commercially, stick to what they can do best, and plan for concomitant changes across the curriculum. A new CAAD system with the emphasis on the design interface being implemented in UCD School of Architecture is briefly described.
keywords	CAAD, System Design
series	eCAADe
last changed	2022/06/07 07:50

_id	596b
authors	Richens, P.
year	1983
title	Dis-integrated Models for Building Design
source	Proceedings PARC83 International Conference on the Use of Computers in Architecture. Berlin
series	other
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2000/03/05 19:05

_id	ea43
authors	Roberts, Teresa L. and Moran, Thomas P.
year	1983
title	The Evaluation of Text Editors : Methodology and Empirical Results
source	Communications of the ACM. April 1983. vol. 26: pp. 265-283 : diagrams and tables. includes bibliography
summary	This paper presents a methodology for evaluating text editors on several dimensions: the time it takes experts to perform basic editing tasks, the time experts spend making and correcting errors, the rate at which novices learn to perform basic editing tasks, and the functionality of editors over more complex tasks. Time, errors, and learning are measured experimentally; functionality is measured analytically; time is also calculated analytically. The methodology has thus far been used to evaluate nine diverse text editors, producing an initial database of performance results. The database is used to tell us not only about the editors but also about the users - the magnitude of individual differences and the factors affecting novice learning
keywords	design, evaluation, word processing
series	CADline
last changed	2003/06/02 13:58

_id	0a6e
authors	Walters, Roger
year	1986
title	CAAD: Shorter-term Gains; Longerterm Costs?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 185-196
summary	Assessment of CAAD systems in use is complex: it needs careful qualifications and is often contradictory. It is suggested that little progress has been made in making sense of the impacts of computing on design and design organizations. Impacts are more diverse and complicated than has been assumed. Assessments tend to be either overtly optimistic or pessimistic, yet the need is to be realistic. Moreover, impacts have been the subject of speculation and marketing rather than systematic study. Carefully documented case studies of projects or longitudinal studies of organizational impacts remain the exception. This chapter draws upon recorded user experience reported elsewhere (Walters, 1983)' and presents an assessment of the performance in use of current production systems. It presents an end-user view and also identifies a number of outstanding design research topics It is suggested that different systems in different organizations in different settings will give rise to new impacts. A wide variety of outcomes is possible. It seems unlikely that any simple set of relationships can account for all the data that inquiry reveals. The task becomes one of identifying variables that lead to differential outcomes, as the same cause may lead to different effects (Attewell and Rule, 1984). This becomes a long-term task. Each optimistic impact may be countered by some other more pessimistic impact. Moreover, the changes brought about on design by computing are significant because both beneficial and non- beneficial impacts are present together. Impacts are held in a dynamic balance that is subject to constant evolution. This viewpoint accounts for otherwise conflicting conclusions. It is unlikely that the full range of impacts is yet known, and a wide range of impacts and outcomes already need to be taken into account. It seems that CAD alone cannot either guarantee improved design or that it inevitably leads to some diminished role for the designer. CAD can lead to either possible outcome, depending upon the particular combination of impacts present. Careful matching of systems to design organization and work environment is therefore needed. The design management role becomes crucial.
series	CAAD Futures
last changed	1999/04/03 17:58

For more results click below: