Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 71

Reformat results as: short short into frame detailed detailed into frame

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	46b2
authors	Rasdorf, William J. and Fenves, Stephen J.
year	1983
title	Organization of a Structural Design Database
source	Electronic Computation Conference Proceedings (8th : 1983 : Houston, TX). American Society of Civil Engineers, pp. 559-571. CADLINE has abstract only
summary	This paper proposes a database schema that supports structural engineering design of buildings. An evaluation and comparison of hierarchical, network, and relational databases shows that relational databases are especially suited to a structural engineering design database. The proposed database schema represents the complex relationships between the components of a building-design database. The schema consists of a structural system hierarchy that relates abstract database components to basic building elements. In addition, it combines topology with attributes to achieve an integration that allows the representation of a broad range of common building configurations and structural systems. The user can combine a basic set of constructs to generate either a general or a very detailed description of a structure. The high degree of integration of topology and attributes yields a database that possesses desirable relational characteristics. The database provides efficient access to components based both on their location and on their attribute values. It also allows the user to add, delete, retrieve, and modify database components and values. The versatility and flexibility of the relational model make it a useful tool for managing building engineering data
keywords	building, details, database, civil engineering, integration
series	CADline
last changed	2003/06/02 13:58

_id	0cfd
authors	Zawack, Daniel J. and Thompson, Gerald L.
year	1983
title	A Dynamic Space-Time Network Flow Model for City Traffic Congestion
source	43 p. : ill. graphs Pittsburgh, PA: Design Research Center CMU, December, 1983. DRC-70-18-83. includes bibliography
summary	A space-time network is used to model traffic flows over time for a capacitated road transportation system having one-way and two-way streets. Also traffic signal lights, which change the network structure, are explicitly incorporated into the model. A linear (time) cost per unit flow is associated with each arc, and it is shown that under the model structure, travel time on a street is piecewise linear convex function of the number of units travelling on that street. Hence congestion effects are explicitly considered while maintaining the linear nature of the model. Two efficient solutions methods are proposed. A network flow solution for multiple source single destination network and a shortest path solution for a single source single destination network
keywords	dynamic programming, simulation, planning, graphs, networks, transportation
series	CADline
last changed	2003/06/02 10:24

_id	ecaade2013_139
id	ecaade2013_139
authors	Mendes, Leticia Teixeira; Beirão, José Nuno; Duarte, José Pinto and Celani, Gabriela
year	2013
title	A Bottom-Up Social Housing System Described with Shape Grammars
doi	https://doi.org/10.52842/conf.ecaade.2013.2.705
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 705-714
summary	This paper presents the analysis of a bottom-up design system using shape grammars. This research is part of a larger study that proposes the development of a generic grammar to improve the quality of site development in social housing plans, including the improvement of their public spaces. We show the use of shape grammars as an analytical method to study the design of Belapur social housing development, designed by Charles Correa, in 1983.
wos	WOS:000340643600073
keywords	Design methodology; shape grammar; analytical grammar; low-income housing.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	e21e
authors	Kajiya, J.T.
year	1983
title	New techniques for ray tracing procedurally defined objects
source	Computer Graphics, 17 3, 91-102
summary	We present new algorithms for efficient ray tracing of three procedurally defined objects: fractal surfaces, prisms, and surfaces of revolution. The fractal surface algorithm performs recursive subdi- vision adaptively. Subsurfaces which cannot intersect a given ray are culled from further consideration. The prism algorithm transforms the three-dimensional ray-surface intersection problem into a two-dimensional ray-curve intersection problem, which is solved by the method of strip trees. The surface- of-revolution algorithm transforms the three-dimensional ray-surface intersection problem into a two-dimensional curve-curve intersection problem, which again is solved by strip trees.
series	journal paper
last changed	2003/04/23 15:50

_id	08c4
authors	Mylopoulos, John, Shibahara, Tetsutaro and Tsotsos, John K.
year	1983
title	Building Knowledge-Based Systems : The PSN Experience
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 83-88. includes bibliography
summary	Knowledge-representation languages have been classified traditionally as declarative or procedural, depending on whether their basic features come from mathematical logic or data structures on one hand, or from programming languages on the other hand. Procedural representation languages are particularly well suited for heuristic knowledge, and their use can lead to efficient searching on the part of an expert system. Many attempts have been made to integrate features of declarative and procedural representation languages. PSN is one attempt that focuses on the integration of semantic network and procedural notions
keywords	systems, knowledge base, semantic networks, integration,
series	CADline
last changed	2003/06/02 13:58

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
doi	https://doi.org/10.52842/conf.ecaade.2009.357
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
wos	WOS:000334282200043
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8d59
authors	Andersen, J.M.
year	1983
title	CAD in Architectural Practice
source	Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary	A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords	computer graphics, HVAC, applications, practice, architecture
series	CADline
last changed	2003/06/02 13:58

_id	41af
authors	Barnhill, Robert E.
year	1983
title	A Survey of the Representation and Design of Surfaces
source	IEEE Computer Graphics and Applications. October, 1983. vol. 3: pp. 9-16 : ill. includes bibliography
summary	The approach of devising robust surface methods applicable to arbitrarily located data was taken by the CAGD Group at the University of Utah. Adopting two broad classes of methods suitable for solving the problems (i.e., problems for which simplifying geometric assumptions cannot be made): (1) surface interpolants defined over triangles or tetrahedra and (2) distance-weighted interpolants. Interactive computer graphics was used to display surfaces for adequate visualization. Although some figures were given, it must be kept in mind that some 3-D medium, or at least motion, is necessary to understand surfaces
keywords	computational geometry, computer graphics, representation, curved surfaces, mathematics
series	CADline
last changed	2003/06/02 10:24

_id	213d
authors	Bernard, Yves and Dupagne, Albert
year	1983
title	Volume: a computer Program for building Modelisation and Manipulation
doi	https://doi.org/10.52842/conf.ecaade.1983.x.n2m
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.70-III.79
summary	We describe a computer program VOLUME for interactive 3D modelling of building which can be used in many problems (heat losses calculations, architectural evaluation, ...) where a geometric representation is required. The program is more than a tool to input a geometry: it is also a tool for design; manipulations are very easy and many design solutions can be tried. We then discuss about developments for improving the quality of that tool in the design process.
keywords	Computer Aided Design, 3D Modelling, Computer-user Interface, Evaluations
series	eCAADe
email
more	http://www.ulg.ac.be/lema/
last changed	2022/06/07 07:50

_id	2e0a
authors	Besant, C.B.
year	1983
title	Computer-Aided Design and Manufacture. -- 2nd. ed
source	232 p. : ill. Chicester [West Sussex], New York: Halsted Press, 1983. includes bibliography and index -- (Ellis Horwood Series in Engineering Science)
summary	An introduction to computing as an aid to design and manufacture. Provides description of hardware and software of CAD systems, discusses their use in engineering drafting
keywords	drafting, hardware, software, CAD, CAM, practice
series	CADline
last changed	2003/06/02 13:58

_id	0000
authors	Bijl, Aart
year	1983
title	Know Your Technology - Or: Can Computers Understand Designers?
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t5s
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. V.1-V.11
summary	Any great expansion of the population of computer users, embracing architects and other ordinary people, will happen only if we change from current computing technology to radically new software technology. Criteria for new technology are discussed, with reference to inadequacies of current technology; we should strive for computers that can understand people. Logic programming is described as one development towards this goal, illustrated by the example of Prolog serving as interpreter of user demands and supporting partial and changing logical models of user activity. Architects can choose computing options now that will put them on a path leading to future new technology. Choice is explained, favouring a software environment that is used by researchers and also supports immediate and practical computer applications. Lessons are drawn for architectural education, to prepare for change that will take place during a student's 40-year working life.
keywords	Software Technology, Logic Programming
series	eCAADe
last changed	2022/06/07 07:50

_id	e10e
authors	Billon, R. and Rocca, R.
year	1983
title	Comprendre KEOPS: Logiciel de conception assistee par ordinateur en architecture
doi	https://doi.org/10.52842/conf.ecaade.1983.x.s9f
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.19-III.35
summary	En informatique graphique, la méthode la plus courante pour saisir un bâtiment consiste à dêcrire et à stocker en base de données les "pleins": les murs, planchers, composants. Cette procédure est vite fastidieuse, et ne permet pas réellement une véritable conception assistée par ordinateur. KEOPS expérimente une autre méthode qui consiste à décrire l'esquisse par ses "vides", c'est-à-dire les volumes des locaux en trois dimensions. Le logiciel opère automatiquement la transformation "filaire" en composants et ouvrages du bâtiment en exploitant un savoir technologique. Le benéfice? La réduction spectaculaire du temps de saisie et un logiciel de C.A.O. enfin opérationnel en bâtiment.
series	eCAADe
more	http://www.marseille.archi.fr
last changed	2022/06/07 07:50

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4491
authors	Bouyat, M., H. Botta and Vignat, J. C.
year	1983
title	VERDI : A Computer Aided Design System for Development and City Planning
source	ACM IEEE Design Automation Conference Proceedings (20th : 1983 : Miami Beach, Florida). pp. 382-385 : ill. includes bibliography
summary	The system presented is a CAD system for use in planning road and other facility networks. Taking a draft master plan as its point of departure the system makes it possible: (1) To plan in a dynamic fashion since it permits the back-and-forth study of the interconnections between the design of the master plan and network design; (2) to preserve, from one work session to another, data that has already been acquired and calculated; (3) to make relevant technical evaluations in the following three fields: earthworks, roads, and sewage networks
keywords	CAD, urban planning, applications
series	CADline
last changed	2003/06/02 13:58

_id	8c67
authors	Brachman, Ronald J., Levesque, Hector J. and Fikes, Richard E.
year	1983
title	Krypton : A Functional Approach to Knowledge Representation
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 67-73 : ill. includes bibliography
summary	While the basic ideas of frame systems are straight forward, complication arise in their design. A design strategy was developed and have been implemented in a representation system called Krypton. Krypton distinguishes between definitional and factual information by using both frame- based and logic-based languages. The result is a system defined in functional not structural terms
keywords	AI, frames, knowledge, representation, systems
series	CADline
last changed	2003/06/02 10:24

_id	6da7
authors	Bridges, Alan
year	1983
title	Course Description - University of Strathclyde - Msc In Building Science (Computer Aided Building Design)
doi	https://doi.org/10.52842/conf.ecaade.1983.x.v4x
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.40-I.51
summary	This paper describes a one-year postgraduate course in computer-aided building design. The course structure is outlined, together with the resources required to run such a course. Details of the course modules are given in an appendix.
keywords	Postgraduate Course, Computer-aided Building Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6647
authors	Buxton, W., M.R. Lamb and Sherman, D. (et al)
year	1983
title	Towards a Comprehensive User Interface Management System
source	computer Graphics. July, 1983. vol. 17: pp. 35-42 : ill. includes bibliography
summary	A UIMS developed at the University of Toronto is presented. The system has two main components. The first is a set of tools to support the design and implementation of interactive graphics programs. The second is a run-time support package which handles interactions between the system and the user (things such as hit detection, event detection, screen updates, and procedure invocation), and provides facilities for logging user interactions for later protocol analysis. The design / implementation tool is a preprocessor, called MENULAY, which permits the applications programmer to use interactive graphics techniques to design graphics menus and their functionality. The output of this preprocessor is high- level code which can be compiled with application-specific routines. User interactions with the resulting executable module are then handled by the run-time support package. The presentation works through an example from design to execution in a step-by-step manner
keywords	software, user interface, management, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	88b6
authors	Campello, Ruy Eduardo and Maculan, Nelson
year	1983
title	A Lower Bound to the Set Partitioning Problem with Side Constraints
source	24 p. : ill. Pittsburgh: Design Research Center, CMU, December, 1983 DRC-70-20-83. includes bibliography.
summary	A Lagrangean relaxation approach is proposed to provide a lower bound on the optimal solution of the set partitioning problem with side constraints, which is a general methodology to solve a combinatorial optimization problem. This Lagrangean relaxation approach is accomplished by a subgradient optimization procedure which solves at each iteration a special 0-1 knapsack problem. The approach seems to be promising since it produces feasible integer solutions to the side constraints that can hopefully be the optimal solution to most of the instances of the set partitioning problem with side constraints
keywords	mathematics, operations research, relaxation, algorithms, combinatorics, optimization, constraints
series	CADline
last changed	2003/06/02 13:58

For more results click below: