Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 109

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c4a6
authors	Haapasalo, Harri
year	1997
title	The Role of CAD In Creative Architectural Sketching
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o2b
summary	The history of computers in architectural design is very short; only a few decades; when compared to the development of methods in practical design (Gero 1983). However, the development of the user interfaces has been very fast. According to the practical observations of over one hundred architects, user interfaces are at present inflexible in sketching, although computers can make drafts and the creation of alternatives quicker and more effective in the final stages of designing (Haapasalo 1997). Based on our research in the field of practical design we would wish to stimulate a wider debate about the theory of design. More profound perusal compels us to examine human modes, pre-eminently different levels of thinking and manners of inference. What is the meaning of subconscious and conscious thinking in design? What is the role of intuition in practical design? Do the computer aided design programs apply to creative architectural sketching? To answer such questions, distinct, profound and broad understanding from different disciplines is required. Even then, in spite of such specialist knowledge we cannot hope to unambiguously and definitively answer such questions.
keywords	Creativity, Design Process, Architectural Design, Sketching, Computer Aided Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/haapas/haapas.htm
last changed	2022/06/07 07:50

_id	a04f
authors	Smeltzer, G.T.A.
year	1983
title	Integration of Design Methods, Industrial Engineering and Informatics
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. I.20-I.28
doi	https://doi.org/10.52842/conf.ecaade.1983.x.q8r
summary	With the composition of a new CAD education plan the opportunity presents itself to enter into new, valuable relationships with other faculties or faculty-units, at present already working in specific fields as computing or designing. Certain aspects, which are important for CAD-Education, have already been taught for a longer period before CAD became a special, recognized part in the curriculum of the faculty. Because the university cannot afford duplication anymore, and because a unit concerned with CAD cannot have all the necessary knowhow of all specialities at its own disposal, it is an important task of that unit to integrate relevant parts or aspects of faculty or unit-curricula.
keywords	CAD Education, Curriculum
series	eCAADe
email
last changed	2022/06/07 07:50

_id	bacd
authors	Abadí Abbo, Isaac
year	1999
title	APPLICATION OF SPATIAL DESIGN ABILITY IN A POSTGRADUATE COURSE
source	Full-scale Modeling and the Simulation of Light [Proceedings of the 7th European Full-scale Modeling Association Conference / ISBN 3-85437-167-5] Florence (Italy) 18-20 February 1999, pp. 75-82
summary	Spatial Design Ability (SDA) has been defined by the author (1983) as the capacity to anticipate the effects (psychological impressions) that architectural spaces or its components produce in observers or users. This concept, which requires the evaluation of spaces by the people that uses it, was proposed as a guideline to a Masters Degree Course in Architectural Design at the Universidad Autonoma de Aguascalientes in Mexico. The theory and the exercises required for the experience needed a model that could simulate spaces in terms of all the variables involved. Full-scale modeling as has been tested in previous research, offered the most effective mean to experiment with space. A simple, primitive model was designed and built: an articulated ceiling that allows variation in height and shape, and a series of wooden panels for the walls and structure. Several exercises were carried out, mainly to experience cause -effect relationships between space and the psychological impressions they produce. Students researched into spatial taxonomy, intentional sequences of space and spatial character. Results showed that students achieved the expected anticipation of space and that full-scale modeling, even with a simple model, proved to be an effective tool for this purpose. The low cost of the model and the short time it took to be built, opens an important possibility for Institutions involved in architectural studies, both as a research and as a learning tool.
keywords	Spatial Design Ability, Architectural Space, User Evaluation, Learning, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:27

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2009.357
wos	WOS:000334282200043
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8d59
authors	Andersen, J.M.
year	1983
title	CAD in Architectural Practice
source	Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary	A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords	computer graphics, HVAC, applications, practice, architecture
series	CADline
last changed	2003/06/02 13:58

_id	213d
authors	Bernard, Yves and Dupagne, Albert
year	1983
title	Volume: a computer Program for building Modelisation and Manipulation
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.70-III.79
doi	https://doi.org/10.52842/conf.ecaade.1983.x.n2m
summary	We describe a computer program VOLUME for interactive 3D modelling of building which can be used in many problems (heat losses calculations, architectural evaluation, ...) where a geometric representation is required. The program is more than a tool to input a geometry: it is also a tool for design; manipulations are very easy and many design solutions can be tried. We then discuss about developments for improving the quality of that tool in the design process.
keywords	Computer Aided Design, 3D Modelling, Computer-user Interface, Evaluations
series	eCAADe
email
more	http://www.ulg.ac.be/lema/
last changed	2022/06/07 07:50

_id	0000
authors	Bijl, Aart
year	1983
title	Know Your Technology - Or: Can Computers Understand Designers?
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. V.1-V.11
doi	https://doi.org/10.52842/conf.ecaade.1983.x.t5s
summary	Any great expansion of the population of computer users, embracing architects and other ordinary people, will happen only if we change from current computing technology to radically new software technology. Criteria for new technology are discussed, with reference to inadequacies of current technology; we should strive for computers that can understand people. Logic programming is described as one development towards this goal, illustrated by the example of Prolog serving as interpreter of user demands and supporting partial and changing logical models of user activity. Architects can choose computing options now that will put them on a path leading to future new technology. Choice is explained, favouring a software environment that is used by researchers and also supports immediate and practical computer applications. Lessons are drawn for architectural education, to prepare for change that will take place during a student's 40-year working life.
keywords	Software Technology, Logic Programming
series	eCAADe
last changed	2022/06/07 07:50

_id	e10e
authors	Billon, R. and Rocca, R.
year	1983
title	Comprendre KEOPS: Logiciel de conception assistee par ordinateur en architecture
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.19-III.35
doi	https://doi.org/10.52842/conf.ecaade.1983.x.s9f
summary	En informatique graphique, la méthode la plus courante pour saisir un bâtiment consiste à dêcrire et à stocker en base de données les "pleins": les murs, planchers, composants. Cette procédure est vite fastidieuse, et ne permet pas réellement une véritable conception assistée par ordinateur. KEOPS expérimente une autre méthode qui consiste à décrire l'esquisse par ses "vides", c'est-à-dire les volumes des locaux en trois dimensions. Le logiciel opère automatiquement la transformation "filaire" en composants et ouvrages du bâtiment en exploitant un savoir technologique. Le benéfice? La réduction spectaculaire du temps de saisie et un logiciel de C.A.O. enfin opérationnel en bâtiment.
series	eCAADe
more	http://www.marseille.archi.fr
last changed	2022/06/07 07:50

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8b75
authors	Cullen, Ian
year	1983
title	Expert Systems in Architectural and Planning Education
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.1-IV.15
doi	https://doi.org/10.52842/conf.ecaade.1983.x.a7j
summary	The paper discusses the problems and possibilities of a project initiated recently within the Bartlett in the general area of knowledge engineering. The aim is to assemble a set of knowledge bases which may be explored interactively by students. The system will differ from traditional CAL packages in that it will be both problem oriented - designed to extract from the students the information required to reach a specific decision - and capable of providing an explanation of its approach at any point.
keywords	Knowledge Engineering
series	eCAADe
last changed	2022/06/07 07:50

_id	2328
authors	David, B. and Décoppet, A.
year	1983
title	Architectural Programming with CAD
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.23-II.35
doi	https://doi.org/10.52842/conf.ecaade.1983.x.e3n
summary	We would like to explain to you the programme for a ten-week workshop spending ten hours per week on the architectural programming of a particular project. We have developed a special methodology which is a synthesis between Architectural Programming Methodology and Integrated CAD Methodology and have used it on two occasions. We would like to describe our experience with this workshop.
series	eCAADe
email
more	http://www.grenoble.archi.fr
last changed	2022/06/07 07:50

_id	4b04
authors	De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year	1983
title	Proceedings of the International Conference eCAADe 1983
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
doi	https://doi.org/10.52842/conf.ecaade.1983
summary	In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels. The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series	eCAADe
email
more	http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed	2022/06/07 07:49

_id	0127
authors	Durand, Yves
year	1983
title	Perspective Drawings of Architectural Scenes Calculated by Fortranprograms which Make Use of Hidden Line Algorithms and "Solid Modeling" in APL for the Data Preparation.
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.36-III.69
doi	https://doi.org/10.52842/conf.ecaade.1983.x.x5q
summary	This paper gives an account of works recently undertaken by the Department of Architecture of Mons Polytechnic School (Belgium) about a program of computer-assisted design. That program, written in FORTRAN, has been elaborated with the object of drawing perspective architectural scenes on digital plotters or graphic printers and of eliminating hidden lines from these scenes. Two algorithms, that yield good results for automatic search of observer's position in terms of orientation and for the computation of hidden lines in case of numerous segments and opaque surfaces, are presented. Some graphic examples are provided. An algorithm of previous classifying of segments and opaque surfaces is propounded. The precision of calculations and the magnitude of tolerances for parametric operations of comparison are discussed. The use of APL to introduce, modify or correct data is approached; in this way, a survey of potential application of APL for solid modeling is suggested.
keywords	Computer-assisted Design, FORTRAN
series	eCAADe
more	http://www.fpms.ac.be
last changed	2022/06/07 07:50

_id	8e9b
authors	Foque, R. and Hashimshony, R.
year	1983
title	Experience of a Design Exercise, Making Use of the Programs: Goal, Bible & Gloss (Developed by Abacus)
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.1-II.9
doi	https://doi.org/10.52842/conf.ecaade.1983.x.m4v
summary	A 6 weeks (2 days a week) design exercise, making use of the above programs, was held the last bimester in the Faculty of Architecture in TH Delft. This exercise was an experimental one for the students, as well as for the teachers. As the exercise had an experimental character, it is clear that a lot should be learned from that experience, both from its positive and negative outcomes. The paper will try to evaluate on this point for the benefit of those intending to set up similar projects.
keywords	Experimental Exercise
series	eCAADe
last changed	2022/06/07 07:50

_id	4dc9
authors	Fregier, Marius
year	1983
title	TRANSFORMATION PIPES: A model to manipulate data, using graphical interaction, based on transformation pipes, between the graphical devices and a data base
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.16-IV.25
doi	https://doi.org/10.52842/conf.ecaade.1983.x.h7h
summary	Conditions of the manipulation of data, using a high level of graphical interaction within a data base in computer aided architectural design, are examined. A so called "TRANSFORMATION PIPES" model (data structure and processes) is described, its goal being to carry out the communications from the graphical devices to the data base and vice versa.
keywords	Abstract Data Structure, Morphological Description
series	eCAADe
last changed	2022/06/07 07:50

_id	620a
authors	Galle, Per
year	1983
title	A Theorem Relating to Exhaustive Generation of Floor Plans
source	Bulletin of Computer Aided Architectural Design. May, 1983. pp. 30-33 : ill
summary	Many problems arise in connection with automated design of architectural floor plans. If modular grids are used, one problem is to avoid repeated generation of the same plan on different modular grids. Using the concept of 'modular complexity,' the paper presents and proves a theorem which offers a solution to this problem
keywords	automation, design, planning, architecture, floor plans, grids, search, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	610b
authors	Hall, R.N.
year	1983
title	The Use of Gable OMS (Object Modelling System) in the Building Design ProcessThe Use of Gable OMS (Object Modelling System) in the Building Design Process
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.1-III.18
doi	https://doi.org/10.52842/conf.ecaade.1983.x.b6t
summary	GABLE CAD SYSTEMS comprise a suite of integrated sub-systems, one of which is OMS. The use of OMS in the development of a building design enables three dimensional graphical modelling of objects associated with buildings. Thus furniture, fittings and fixtures may be located within any room in a building or outside a building or in relation to other groups of objects unrelated to a building. Once located, objects and building may be seen in 2D plan and elevation/section projection or 3D projection (perspectives, axonometrics, isometrics, etc.). In this way furniture, people, cars, trees,landscape objects may all be modelled and graphically represented in addition to the modelling capabilities enabled using GABLE BMS (Building Modelling System). These graphically represented 2D and 3D views of objects can then be passed into GABLE IDS for further embellishment, annotation or dimensioning to produce detailed working drawings.
keywords	Three Dimensional Graphical Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	1247
authors	Hasell, Mary Joyce
year	1983
title	Gaming Simulation: A Communication Tool for Architects and Designers
source	University of Michigan
summary	In today's technological society, people spend more and more time in built environments that they have little or no control in shaping. There is also a large gap in communication between designers of the built environment and non-designers. The language that non-designers use to communicate specific spatial needs, whether aesthetic or functional, is different from the formal language that designers use to communicate these issues with each other. Gaming simulation, as a communication tool, has a number Note of characteristics that make it useful for improving communication and increasing participation among designers and non-designers. In this study, a method of teaching the design of gaming simulation to designers of the built environment is developed. This method includes a Game Design Index or cataloging system of gaming tehniques, within the context of a game design process. A questionnaire was used to interview the designers of the most current physical design games about the gaming techniques in their games. Their answers were organized into the Game Design Index and set within the context of a process for designing a game. This process was tested by teaching a course to graduate students in Urban Planning and Architecture. Further testing was done by holding a game design workshop for professional architects. The findings indicate that it is possible to analyze existing games for their gaming techniques and to index them in an organized way. It is also possible to add this index to an existing game design process. By using this process, graduate students were able to design gaming simulations of high quality, although professionals who attended a day-and-a-half workshop, were not so successful. This latter problem was primarily the result of the complexity of the task and the time constraint imposed. This dissertation describes the game design process that was used to teach neophytes to design games as well as the Game Design Indexes for ten existing games. A comprehensive review of games concerned with physical design is included
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: