Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 86

Reformat results as: short short into frame detailed detailed into frame

_id	6050
authors	Bentley, Jon L.
year	1984
title	Algorithm Design Techniques -- Programming Pearls
source	communications of the ACM. September, 1984. vol. 27: pp. 865-871 : ill
summary	The problem arose in one-dimensional pattern recognition: The input is a vector X of N real numbers; the output is the maximum sum found in any contiguous subvector of the input. The problem is when some of the numbers are negative. This column is built around that problem with an emphasis on the algorithms that solve it and the techniques used to design them
keywords	techniques, programming, algorithms, pattern recognition
series	CADline
last changed	2003/06/02 13:58

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
doi	https://doi.org/10.52842/conf.caadria.2004.005
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	409c
authors	Akin, Omer, Flemming, Ulrich and Woodbury, Robert F.
year	1984
title	Development of Computer Systems for Use in Architectural Education
source	1984. ii, 47 p. includes bibliography
summary	Computers have not been used in education in a way that fosters intellectual development of alternate approaches to design. Sufficient theory exists to use computing devices to support other potentially fruitful approaches to design. A proposal is made for the development of a computer system for architectural education which is built upon a particular model for design, that of rational decision making. Within the framework provided by the model, a series of courseware development projects are proposed which together with hardware acquisitions constitute a comprehensive computer system for architectural education
keywords	architecture, education, design, decision making
series	CADline
email
last changed	2003/06/02 13:58

_id	sigradi2015_9.347
id	sigradi2015_9.347
authors	Andrade, Eduardo; Orellana, Nicolas; Mesa, Javiera; Felmer, Patricio
year	2015
title	Spatial Configuration and Sociaty. Comparison between the street market Tristan Matta and Tirso de Molina Market
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 481-485.
summary	This research aims to clarify how certain visual and accessibility patterns, in buildings and urban environments, are related to social activities that take place in them. The study, based on the theory of space syntax (Hillier & Hanson 1984; Hillier, 1996), seeks to recognize patterns of behavior, both individual and aggregate. The case studies are Tirso de Molina Market and the free street market Tristan Matta, both in Santiago de Chile.
keywords	pace Syntax, Visibilidad, Accesibilidad, Conectividad, Comportamiento
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	4685
authors	Barsky, Brian A.
year	1984
title	A Description and Evaluation of Various 3-D Models
source	IEEE Computer Graphics and Applications. January, 1984. vol. 4: pp. 38-52 : ill. Includes bibliography
summary	The use of parametric curves and surfaces for object modeling in computer graphics is becoming increasingly popular. There is sometimes, however, a reluctance to use them because it seems that the added power they give is more than offset by the complexity of their formulations and their computations. The purpose of this article is to clarify their meanings and uses and show how much they have in common behind the diversity of their formulations. The author discusses the properties and benefits of using the parametric Hermite, Coons, Bezier, B-spline, and Beta-spline curve and surface formulations
keywords	Hermite, Coons, curved surfaces, Bezier, curves, B- splines, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	c9c1
authors	Basili, Victor R. and Perricone, Barry T.
year	1984
title	Software Errors and Complexity : An Empirical Investigation
source	communications of the ACM. January, 1984. vol. 27: pp. 42-52 : ill. includes bibliography
summary	The relationships between the frequency and distribution of errors during software development, the maintenance of the developed software, and a the influence of a variety of environmental factors on software development were analyzed. These factors include the complexity of the software, the developer's experience with the application, and the reuse of existing design and code. Such relationships can not only provide an insight into the characteristics of computer software development and the effects that the environment can have on the product, but also improve its reliability and quality. The study is based on data derived from a medium- scale software development project
keywords	software, engineering, programming, reliability
series	CADline
last changed	2003/06/02 13:58

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	6118
authors	Bentley, Jon L.
year	1984
title	Code Tuning -- Programming Pearls
source	communications of the ACM. February, 1984. vol. 27: pp. 91-96
summary	Efficiency is one of many problems in programming, and there are many ways to achieve it. This column is about a low-level approach . 'Code tuning' locates the expensive parts of an existing program and then modifies that code to improve its performance
keywords	programming, search, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

_id	c159
authors	Bentley, Jon L.
year	1984
title	A Case Study in Applied Algorithm Design
source	IEEE Computer. February, 1984. vol. 17: pp. 75-88 : ill. tables. includes bibliography
summary	In this article the author describes how an algorithm design was used in the development of a small routine in a software system
keywords	algorithms, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	8087
authors	Boehm, Barry W., Penedo, Maria H. and Stuckle, Don E. (et al)
year	1984
title	A Software Development Environment for Improving Productivity
source	IEEE Computer. June, 1984. pp. 30-44 : ill. includes bibliography
summary	The software productivity system (SPS) was developed to support project activities. It involves a set of strategies, including the work environment; the evaluation and procurement of hardware equipment; the provision for immediate access to computing resources through local area networks; the building of an integrated set of tools to support the software development life cycle and all project personnel; and a user support function to transfer new technology. All of these strategies are being accomplished incrementally. The current architecture is VAX-based and uses the Unix operating system, a wideband local network, and a set of software tools. The article describes the steps that led to the creation of the software productivity project and its components and summarized the requirements analyses on which the SPS was based
keywords	productivity, software, hardware, programming
series	CADline
last changed	2003/06/02 10:24

_id	4e4e
authors	Boissonnat, Jean-Daniel
year	1984
title	Geometric Structures for Three- Dimensional Shape Representation
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 266-286 : ill. includes bibliography
summary	Different geometric structures are investigated in the context of discrete surface representation. It is shown that minimal representations (i.e., polyhedra) can be provided by a surface-based method using nearest neighbors structures or by a volume-based method using the Delaunay triangulation. Both approaches are compared with respect to various criteria, such as space requirements, computation time, constraints on the distribution of the points, facilities for further calculations, and agreement with the actual shape of the object
keywords	algorithms, polyhedra, curves, curved surfaces, solids, representation, geometric modeling, data structures
series	CADline
last changed	1999/02/12 15:07

_id	088a
authors	Brotman, Shapiro Lynne and Badler, Norman I.
year	1984
title	Generating Soft Shadows With a Depth Buffer Algorithm
source	IEEE Computer Graphics and Applications. October, 1984. pp. 5-12 : ill. includes bibliography
summary	The authors take a pragmatic approach to shadowing and describe an algorithm that combines an existing shadowing method with a popular visible surface rendering technique, called a 'depth buffer,' to generate soft shadows resulting from light sources of finite extent. Their method extend Crow's shadow volume algorithm to produce multiple shadows overlapped to yield the characteristic soft edges of a shadow penumbra
keywords	rendering, algorithms, shadowing, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	ec87
authors	Buchanan, Bruce G. and Shortliffe, Edward H. (editors)
year	1984
title	Rule- Based Expert Systems : The MYCIN Experiments of the Stanford Heuristic Programming Project
source	xix, 748 p. Reading, Mass.: Addison-Wesley Pub. Co., 1984. includes bibliography: p. 717-738 and subject index
summary	A detailed look at MYCIN, an expert system for diagnosing bacterial infections and prescribing treatment for them. Issues covered include detailed examinations of knowledge acquisition, reasoning, explanation, tutoring, performance evaluation, and human interface
keywords	AI, expert systems, knowledge acquisition, representation, reasoning, user interface
series	CADline
last changed	2003/06/02 13:58

_id	ea4c
authors	Chang, Hsi and Iyengar, S. Sitharama
year	1984
title	Efficient Algorithms to Globally Balance a Binary Search Tree
source	Communications of the ACM. July, 1984. vol. 27: pp. 695-702. includes bibliography
summary	A binary search tree can be globally balanced by readjustment of pointers or with a sorting process in O(n) time, n being the total number of nodes. This paper presents three global balancing algorithms, one of which uses folding with the other two adopting parallel procedures. These algorithms show improvement in time efficiency over some sequential algorithms when applied to large binary search trees. A comparison of various algorithms is presented
keywords	techniques, parallel processing, algorithms, search, sorting
series	CADline
last changed	2003/06/02 13:58

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

For more results click below: