Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 43

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
doi	https://doi.org/10.52842/conf.caadria.2004.005
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	e799
authors	Howes, Jaki
year	1986
title	Computer Education in Schools of Architecture and the Needs of Practice
doi	https://doi.org/10.52842/conf.ecaade.1986.045
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 45-48
summary	In April 1985 there was a meeting (at Huddersfield Polytechnic) or representatives from 26 Schools of Architecture. At this, concern was expressed about the lack of direction from the RIBA with regard to the appropriate level of computer teaching on architectural courses. In addition, it was felt that it was essential that at least one member of a Visiting Board panel should be computer literate and in a position to give advice. These points were raised at the RIBA Computer Committee later in 1985, and the committee's attention was also drawn to comments contained in the report by HM Inspector on Public Sector Education in Architecture (1985) based on investigations made during 1984.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ec87
authors	Buchanan, Bruce G. and Shortliffe, Edward H. (editors)
year	1984
title	Rule- Based Expert Systems : The MYCIN Experiments of the Stanford Heuristic Programming Project
source	xix, 748 p. Reading, Mass.: Addison-Wesley Pub. Co., 1984. includes bibliography: p. 717-738 and subject index
summary	A detailed look at MYCIN, an expert system for diagnosing bacterial infections and prescribing treatment for them. Issues covered include detailed examinations of knowledge acquisition, reasoning, explanation, tutoring, performance evaluation, and human interface
keywords	AI, expert systems, knowledge acquisition, representation, reasoning, user interface
series	CADline
last changed	2003/06/02 13:58

_id	8dce
authors	Manna, Zohare and Waldinger, Richard
year	1984
title	The Logical Basis for Computer Programming : Deductive Reasoning
source	2 v. : ill Reading, Mass.: Addison-Wesley Pub. Co., 1984. vol.1: includes bibliography v.1 p.: [579]-581 and index. -- CADLINE has vol. 1 only. (Addison-Wesley Series in Computer Science)
summary	An introduction to the basic notions of propositional and predicate logic and special theories including integers, strings, trees, lists, sets, and tuples (arrays). Algorithms are expressed not as explicit programs but as the definitions of functions and relations within these theories
keywords	logic, programming, AI, reasoning
series	CADline
last changed	2003/06/02 13:58

_id	6118
authors	Bentley, Jon L.
year	1984
title	Code Tuning -- Programming Pearls
source	communications of the ACM. February, 1984. vol. 27: pp. 91-96
summary	Efficiency is one of many problems in programming, and there are many ways to achieve it. This column is about a low-level approach . 'Code tuning' locates the expensive parts of an existing program and then modifies that code to improve its performance
keywords	programming, search, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

_id	63a9
authors	Hellgardt, Michael
year	1993
title	Architectural Theory and Design Grammars
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i6u
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The idea of artificial brains and artificial intelligence (AI) has been subject to criticism. The objection of J. Searle, for instance, which has been published in 1984 and which was partially directly addressed to one of the centres of AI, the Carnegie Mellon University in Pittsburgh, is mainly based on two points: (1) interactions between physiological and mental functions, and (2) the intentionality and context-relatedness of meaning. - With an emphasis on architectural design, this paper is about the second point, because the problem of meaning is a neuralgic point in the discussion of "artificial intelligence in design" (AID). Technical parameters are incompatible with mechanisms of meaning in any field of artistic, cultural or non-technical expression. This point, that is the relation between acts of meaning and acts of technical problem-solving and, connectedly, the relation between technological and architectural design, has been widely ignored in the discussion on AID. The development seems to be dominated by the tacit assumption that architecture can be articulated and generated purely in technical and formal terms of information processing beyond the field of architecture itself. Design and shape grammars have become a well established field in the discussion of AID, also with respect to architecture. But questions of architectural history and theory are touched on only incidentally and not sufficiently in this discussion. The problem is not, in other words, simply to include more or less unrelated cases of architecture, or architectural concepts -even if these are famous ones, such as Laugier's original hut for instance but to establish structural relations between arguments of architectural theory and arguments of AID.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

_id	0a6e
authors	Walters, Roger
year	1986
title	CAAD: Shorter-term Gains; Longerterm Costs?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 185-196
summary	Assessment of CAAD systems in use is complex: it needs careful qualifications and is often contradictory. It is suggested that little progress has been made in making sense of the impacts of computing on design and design organizations. Impacts are more diverse and complicated than has been assumed. Assessments tend to be either overtly optimistic or pessimistic, yet the need is to be realistic. Moreover, impacts have been the subject of speculation and marketing rather than systematic study. Carefully documented case studies of projects or longitudinal studies of organizational impacts remain the exception. This chapter draws upon recorded user experience reported elsewhere (Walters, 1983)' and presents an assessment of the performance in use of current production systems. It presents an end-user view and also identifies a number of outstanding design research topics It is suggested that different systems in different organizations in different settings will give rise to new impacts. A wide variety of outcomes is possible. It seems unlikely that any simple set of relationships can account for all the data that inquiry reveals. The task becomes one of identifying variables that lead to differential outcomes, as the same cause may lead to different effects (Attewell and Rule, 1984). This becomes a long-term task. Each optimistic impact may be countered by some other more pessimistic impact. Moreover, the changes brought about on design by computing are significant because both beneficial and non- beneficial impacts are present together. Impacts are held in a dynamic balance that is subject to constant evolution. This viewpoint accounts for otherwise conflicting conclusions. It is unlikely that the full range of impacts is yet known, and a wide range of impacts and outcomes already need to be taken into account. It seems that CAD alone cannot either guarantee improved design or that it inevitably leads to some diminished role for the designer. CAD can lead to either possible outcome, depending upon the particular combination of impacts present. Careful matching of systems to design organization and work environment is therefore needed. The design management role becomes crucial.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	6b2f
authors	Wilensky, Robert, Arens, Yigal and Chin, David
year	1984
title	Talking to UNIX in English: An Overview of UC
source	Communications of the ACM Vol. 27.no. 6 (June, 1984): pp. 574-593. includes bibliography
summary	UC is a natural language help facility which advises users in using the UNIX operating system. Users can query UC about how to do things, command names and formats, online definitions of UNIX or general operating systems terminology, and debugging problems in using commands. UC is comprised of the following components: a language analyzer and generator, a context and memory model, an experimental common-sense planner, highly extensible knowledge bases on both the UNIX domain and the English language, a goal analysis component, and a system for acquisition of new knowledge through instruction in English. The language interface of UC is based on a 'phrasal analysis' approach which integrates semantic, grammatical and other types of information. In addition, it includes capabilities for ellipsis resolution and reference disambiguation
keywords	UNIX, natural languages, user interface, knowledge acquisition
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2015_9.347
id	sigradi2015_9.347
authors	Andrade, Eduardo; Orellana, Nicolas; Mesa, Javiera; Felmer, Patricio
year	2015
title	Spatial Configuration and Sociaty. Comparison between the street market Tristan Matta and Tirso de Molina Market
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 481-485.
summary	This research aims to clarify how certain visual and accessibility patterns, in buildings and urban environments, are related to social activities that take place in them. The study, based on the theory of space syntax (Hillier & Hanson 1984; Hillier, 1996), seeks to recognize patterns of behavior, both individual and aggregate. The case studies are Tirso de Molina Market and the free street market Tristan Matta, both in Santiago de Chile.
keywords	pace Syntax, Visibilidad, Accesibilidad, Conectividad, Comportamiento
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	86c4
authors	Shaviv, Edna
year	1984
title	Climate and Building Design - Tradition, Research and Design Tools
source	Energy and Buildings. 1984. vol. 7: pp.55-69 : ill. tables. includes bibliography
summary	Important design parameters that influence the building thermal behavior and in particular natural cooling are discussed. Among these design parameters are: ventilation, evaporation, proper shading, orientation of the building and its proportions with respect to the orientation, the color of the building's envelope and its conductivity, the thermal mass of the building, night radiation to the sky and the stack effect. The latter is the katabatic and anabatic cooling. Different design tools aimed at the study of the influence of the climatological parameters on the form andÔ h)000*°° ÔŒ characteristics of buildings were developed in recent years. These tools help architects in designing houses with improved indoor thermal conditions without mechanical means, or with minimum energy consumptions. Several design tools, as well as design considerations and traditional constructions, are presented
keywords	Emphasis is placed on computer-aided design tools
series	CADline
email
last changed	2003/05/17 10:20

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c9c1
authors	Basili, Victor R. and Perricone, Barry T.
year	1984
title	Software Errors and Complexity : An Empirical Investigation
source	communications of the ACM. January, 1984. vol. 27: pp. 42-52 : ill. includes bibliography
summary	The relationships between the frequency and distribution of errors during software development, the maintenance of the developed software, and a the influence of a variety of environmental factors on software development were analyzed. These factors include the complexity of the software, the developer's experience with the application, and the reuse of existing design and code. Such relationships can not only provide an insight into the characteristics of computer software development and the effects that the environment can have on the product, but also improve its reliability and quality. The study is based on data derived from a medium- scale software development project
keywords	software, engineering, programming, reliability
series	CADline
last changed	2003/06/02 13:58

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	088a
authors	Brotman, Shapiro Lynne and Badler, Norman I.
year	1984
title	Generating Soft Shadows With a Depth Buffer Algorithm
source	IEEE Computer Graphics and Applications. October, 1984. pp. 5-12 : ill. includes bibliography
summary	The authors take a pragmatic approach to shadowing and describe an algorithm that combines an existing shadowing method with a popular visible surface rendering technique, called a 'depth buffer,' to generate soft shadows resulting from light sources of finite extent. Their method extend Crow's shadow volume algorithm to produce multiple shadows overlapped to yield the characteristic soft edges of a shadow penumbra
keywords	rendering, algorithms, shadowing, computer graphics
series	CADline
last changed	2003/06/02 13:58

For more results click below: