Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 99

Reformat results as: short short into frame detailed detailed into frame

_id	4b27
authors	Lansdown, John
year	1984
title	Knowledge for Designers
source	Architect`s journal. England: February, 1984. vol. 179: pp. 55-58
summary	The first of two articles discussing expert systems. Both design and construction are carried out within the framework of empirical rules and regulations designed more for ease of implementation and checking than scientific validity. On completion of a building, little follow up research is done on the way it is used or on the way in which the assumption made in its design are borne out in practice. This present two problems: How to make information from disparate sources easily available to designers and constructors, and how to make them aware that they need this information. This paper describes how a special type of computer programming might assist in solving these problems
keywords	design, construction, building, expert systems, knowledge base, systems, programming, life cycle
series	CADline
last changed	1999/02/12 15:09

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ec87
authors	Buchanan, Bruce G. and Shortliffe, Edward H. (editors)
year	1984
title	Rule- Based Expert Systems : The MYCIN Experiments of the Stanford Heuristic Programming Project
source	xix, 748 p. Reading, Mass.: Addison-Wesley Pub. Co., 1984. includes bibliography: p. 717-738 and subject index
summary	A detailed look at MYCIN, an expert system for diagnosing bacterial infections and prescribing treatment for them. Issues covered include detailed examinations of knowledge acquisition, reasoning, explanation, tutoring, performance evaluation, and human interface
keywords	AI, expert systems, knowledge acquisition, representation, reasoning, user interface
series	CADline
last changed	2003/06/02 13:58

_id	c1ae
authors	Gulliehsen, Eric and Chang, Ernest
year	1984
title	An Expert System for Generative Architectural Design
source	December, 1984. pp. 253-267. includes bibliography
summary	The mathematician-architect Christopher Alexander has devised a scientific theory of architectural design. He believes that all existing architectural entities can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language capable of generating design forms appropriate to a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. This paper presents a computer-based expert system which implements Alexander's design methodology
keywords	synthesis, expert systems, CAD, patterns, design, methods, architecture, theory
series	CADline
last changed	2003/06/02 10:24

_id	6ed3
authors	Rasdorf, William J. and Storaasli, Olaf O.
year	1985
title	The Role of Computing in Engineering Education
source	Toward Expert Systems, Computers and Structures. Pergamon Press, July, 1985. vol. 20: pp. 11-15. Also published in: Advances and Trends in Structures and Dynamics edited by A. K. Noor and R. J. Hayduk
summary	Pergamon Press, 1985. --- Also Published in : Proceedings of the Symposium on Advances and Trends in Structures and Dynamics, Pergamon Press, George Washington University and the National Aeronautics and Space Administration, Washington, D.C. pp. 11-15, Oct.1984. The rapid advances occurring in interactive micro-computing and computer science have provided the engineer with a powerful means of processing, storing, retrieving, and displaying data. The effective use of computer technology in engineering processes and applications is recognized by many as the key to increased individual, company, and national productivity. The implications of this observation for the academic community are clear: we must prepare our students to use computer methods and applications as part of their fundamental education. The proper tradeoff between engineering fundamentals and computer science principles and practices is changing with many of the concepts of engineering now being packaged in algorithms or on computer chips. The components of an education should include operating system fundamentals, data structures, program control and organization, algorithms, and computer architectures. It is critically important for engineering students to receive an education that teaches them these fundamentals. This paper suggests that to convey the essentials of computer science to future engineers requires, in part, the addition of computer courses to the engineering curriculum. It also requires a strengthening of the computing content of many other courses so that students come to treat the computer as a fundamental component of their work. This is a major undertaking, but new engineers graduating with advanced computing knowledge will provide potentially significant future innovations in the engineering profession
keywords	CAE, education, civil engineering
series	CADline
last changed	2003/06/02 13:58

_id	6045
authors	Rychener, Michael D.
year	1984
title	Expert systems for Engineering Design : Problem Components, Technique, & Prototypes
source	31 p. : charts Design Research Center, CMU, March, 1984. DRC-0502-83. includes bibliography
summary	A number of problems in diagnosis and engineering design can be solved by using current expert system techniques. This paper enumerates the main components of such problems and the steps that are taken in solving them. A few prototypical artificial intelligence systems embody techniques that can be applied to engineering problems are surveyed, and their relevance to components of design problems is discussed. Some expert system in design domain are summarized, with emphasis on aspects that can illustrate wider applicability of the techniques
keywords	expert systems, AI, problem solving, design, methods, engineering
series	CADline
last changed	2003/06/02 13:58

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	40d6
authors	Johnson, Robert E.
year	1984
title	The Integration of Economic Analysis and Computer-based Building Models
source	CIB W-65 Symposium. July, 1984. [19] p. : ill. includes bibliography
summary	Most current methods used to evaluate the economics of building designs are inadequate in that they focus on the evaluation of completed designs and do not assist in the development and creation of designs. They are used after most major design decisions have been made. This paper describes the first year of a two year research project (funded by the National Science Foundation, the U.S. Government) which seeks to integrate economic analysis techniques into design decision-making within the context of an interactive computer-aided architectural and engineering design system. Issues reviewed include the current state of computer software, existing economic analysis models and existing economic analysis software. A conclusion is reached that most economic analysis systems fall into the category of single purpose software and are not adaptable to the wide range of idiosyncratic evaluation models used in real estate, architecture, engineering, construction and building management. Objectives are proposed for a general purpose, interactive cost modeling system that is integrated with a geometric computer-based building model. Initial experiments with a prototype of this system at various stages of the design-construction-use process are discussed. Further development of this system as a research tool for exploring alternative economic modeling procedures is presented
keywords	analysis, evaluation, CAD, architecture, design, methods, economics, integration
series	CADline
last changed	2003/06/02 13:58

_id	46b0
authors	Schijf, Rik
year	1986
title	CAD in the Netherlands: Integrated CAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 176-184
summary	One of the things in which a small country can excel is its number of architects' offices per inhabitant. In the Netherlands this is approximately one in 6500, or twice the UK density (CBS, 1984; CICA, 1982). Of the 2150 Dutch offices, 88 per cent employ less than 10 people, which compares rather well with the British Situation. For the Netherlands it is interesting that its boom in CAD, on average an annual doubling or tripling for the next few years, is likely to coincide with a revolution in CAD itself. There is no doubt that very soon the personal and larger CAD systems will clash at supermicro-level.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ddssar0031
id	ddssar0031
authors	Witt, Tom
year	2000
title	Indecision in quest of design
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Designers all start with a solution (Darke, 1984), with what is known (Rittel, 1969, 1970). Hans Menghol, Svein Gusrud and Peter Opvik did so with the chair in the 1970s. Not content with the knowledge of the chair, however, they walked backward to the ignorance of the question that has always elicited the solution of chair and asked themselves the improbable question, “What is a chair?” Their answer was the Balans chair. “Until the introduction of the Norwegian Balans (balance) chair, the multi-billion dollar international chair industry had been surprisingly homogeneous. This chair is the most radical of the twentieth century and probably since the invention of the chair-throne itself (Cranz 1998). Design theorists have tried to understand in a measurable way what is not measurable: the way that designers think. Rather than attempt to analyze something that cannot be taken apart, I attempt to illuminate methods for generating new knowledge through ways of seeing connections that are not logical, and in fact are sometimes ironic. Among the possibilities discussed in this dialogue are the methodological power of language in the form of metaphor, the power of the imagination in mind experiments, the power of mythological story telling, and the power of immeasurable intangibles in the generation of the new knowledge needed to design.
series	DDSS
last changed	2003/08/07 16:36

_id	409c
authors	Akin, Omer, Flemming, Ulrich and Woodbury, Robert F.
year	1984
title	Development of Computer Systems for Use in Architectural Education
source	1984. ii, 47 p. includes bibliography
summary	Computers have not been used in education in a way that fosters intellectual development of alternate approaches to design. Sufficient theory exists to use computing devices to support other potentially fruitful approaches to design. A proposal is made for the development of a computer system for architectural education which is built upon a particular model for design, that of rational decision making. Within the framework provided by the model, a series of courseware development projects are proposed which together with hardware acquisitions constitute a comprehensive computer system for architectural education
keywords	architecture, education, design, decision making
series	CADline
email
last changed	2003/06/02 13:58

_id	architectural_intelligence2023_10
id	architectural_intelligence2023_10
authors	Cheng Bi Duan, Su Yi Shen, Ding Wen Bao & Xin Yan
year	2023
title	Innovative design solutions for contemporary Tou-Kung based on topological optimisation
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00028-x
source	Architectural Intelligence Journal
summary	Tou-Kung, which is pronounced in Chinese and known as Bracket Set (Liang & Fairbank, A pictorial history of Chinese architecture, 1984), is a vital support component in the Chinese traditional wooden tectonic systems. It is located between the column and the beam and connects the eave and pillar, making the heavy roof extend out of the eaves longer. The development of Tou-Kung is entirely a microcosm of the development of ancient Chinese architecture; the aesthetic structure and Asian artistic temperament behind Tou-Kung make it gradually become the cultural and spiritual symbol of traditional Chinese architecture. In the contemporary era, inheriting and developing Tou-Kung has become an essential issue. Several architects have attempted to employ new materials and techniques to integrate the traditional Tou-Kung into modern architectural systems, such as the China Pavilion at the 2010 World Expo and Yusuhara Wooden Bridge Museum. This paper introduces the topological optimisation method bi-directional evolutionary structural optimisation (BESO) for form-finding. BESO method is one of the most popular topology optimisation methods widely employed in civil engineering and architecture. Through analyzing the development trend of Tou-Kung and mechanical structure, the authors integrate 2D and 3D optimisation methods and apply the hybrid methods to form-finding. Meanwhile, mortise and tenon joint used to create stable connections with components of Tou-Kung are retained. This research aims to design a new Tou-Kung corresponding to “structural performance-based aesthetics”. The workflow proposed in this paper is valuable for Architrave and other traditional building components.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	e7cf
authors	Eastman, Charles M. and Preiss, K.
year	1984
title	A Review of Solid Shape Modelling Based on Integrity
source	Computer Aided Design March, 1984. vol. 16: pp. 66-80 : ill. includes bibliography.
summary	The potential benefits of using a canonical model for representing the shapes of solid objects has led to the design and implementation of a number of geometric modelers with varying capabilities. This paper reviews the approaches taken in solid modeling by defining the well-formedness conditions which must be implemented in any modeling system. The methods for satisfying the well-formedness constraints in the various solid modeling methods are reviewed, using the concept of integrity constraints. The incorporation of integrity constraints, both explicitly and implicitly, into solid modelers are considered, with particular focus on boundary modelers. The use of integrity constraints for defining shape families and assembly families are also presented. The result is a unified view of solid shape modeling systems that enables their classification and extension into particular application areas
keywords	solid modeling, constraints, B-rep
series	CADline
email
last changed	2003/05/17 10:15

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	4eaf
authors	Kalay, Yehuda E.
year	1984
title	A Database Management Approach to CAD/CAM Systems Integration
source	December, 1984. 13 p. : ill. includes bibliography
summary	Facilitating the communication between different CAD/CAM systems is rapidly becoming an important issue, as more systems reach the market. A solution to the communication problem can be found if it is considered part of the more general problem of managing the complex information associated with the representation of physical artifacts and environments in the memory of computers, thereby accounting for the operators that are used for accessing the data as well as the data itself. Database management systems have provided powerful solutions to information management problems in a variety of disciplines and enjoy a broad and rigorous research foundation. If the techniques, methods and systems that were developed for database management could be utilized for CAD/CAM integration, they would save a considerable duplication of effort, enhance the integrity of the data, and bring to bear the results and advances that have been achieved over a long period of hard work
keywords	CAD, CAM, relational database, integration, architecture
series	CADline
email
last changed	2003/06/02 10:24

_id	ab9c
authors	Kvan, Thomas and Kvan, Erik
year	1999
title	Is Design Really Social
source	International Journal of Virtual Reality, 4:1
summary	There are many who will readily agree with Mitchell's assertion that "the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process." [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants, that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided, therefore, must permit the best communication and the best social interaction. We see a danger here, a pattern being repeated which may lead us into less than useful activities. As with several (popular) architectural design or modelling systems already available, however, computer system implementations all too often are poor imitations manual systems. For example, few in the field will argue with the statement that the storage of data in layers in a computer-aided drafting system is an dispensable approach. Layers derive from manual overlay drafting technology [Stitt 1984] which was regarded as an advanced (manual) production concept at the time many software engineers were specifying CAD software designs. Early implementations of CAD systems (such as RUCAPS, GDS, Computervision) avoided such data organisation, the software engineers recognising that object-based structures are more flexible, permitting greater control of data editing and display. Layer-based systems, however, are easier to implement in software, more familiar to the user and hence easier to explain, initially easier to use but more limiting for an experienced and thoughtful user, leading in the end to a lesser quality in resultant drawings and significant problems in output control (see Richens [1990], pp. 31-40 for a detailed analysis of such features and constraints). Here then we see the design for architectural software faithfully but inappropriately following manual methods. So too is there a danger of assuming that the best social interaction is that done face-to-face, therefore all collaborative design communications environments must mimic face-to-face.
series	journal paper
email
last changed	2003/05/15 10:29

_id	2885
authors	Lansdown, J. and Maver, T.W.
year	1984
title	CAD in Architecture and Building
source	Computer Aided Design, Vol 16, No 3
summary	CAAD tool have gradually come into use in architecture over the past years. Appraisal and evaluation of designs and design tools and the preparation of product innovations are discussed. Types of visualisation and flexible layout programs for CAAD are assessed. The areas which knowledge-based design systems should cover are discussed .
series	journal paper
email
last changed	2003/06/10 15:55

For more results click below: