Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 17 of 17

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	eacf
authors	Lantz, Keith A. and Nowicki, William I.
year	1984
title	Structured Graphics for Distributed Systems
source	ACM Transactions on Graphics January, 1984. vol. 3: pp. 23-51 : ill.
summary	includes bibliography: pp. 48-51. One of the most important functions of an intelligent workstation is to provide a state-of-the-art user interface to distributed resources. One aspect of such an interface is virtual terminal support for both local and remote applications with a range of requirements, including graphics. To ensure good response for remote applications in particular, the bulk of user interaction must be handled local to the workstation. Therefore, the terminal management software on the workstation must provide object modeling as well as viewing facilities, in contrast to most contemporary graphics systems. One way of doing this is to support structured display files. It is equally important to support simultaneous access to multiple applications ; thus the terminal management software must provide window system facilities. Lastly, since the terminal management software should present a common interface to both local and remote applications, the workstation itself should be regarded as a multifunction component of the distributed system and not strictly as a terminal or a personal computer. This paper presents the system architecture and protocols necessary to achieve these goals and evaluates an existing implementation
keywords	user interface, windowing, computer graphics, programming
series	CADline
last changed	2003/06/02 10:24

_id	88e0
authors	Lee, Y.T., De Pennington, P. and Shaw, N.K.
year	1984
title	Automatic Finite- Element Mesh Generation from Geometric Models : A Point Based Approach
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 287-311 : ill. includes bibliography
summary	A novel algorithm for automatic finite-element mesh generation is described. It uses constructive solid geometry to provide the geometric data for the object to be meshed. The geometric definition of the object and a value for the required mesh density are the only inputs. The method consists of two stages: point generation and mesh construction over the points. It has been implemented in two dimensions and is capable of generating predominantly 'good' quadrilateral elements. Triangular elements are only created in circumstances under which quadrilateral elements are not feasible
keywords	solids, geometric modeling, finite elements, analysis, CSG
series	CADline
last changed	2003/06/02 13:58

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

_id	6c6f
authors	Shaviv, Edna
year	1984
title	National Situation Report: Technion (Haifa, Israel)
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.j7u
summary	In Israel there is only one School of Architecture. CAAD teaching has been introduced since 1969-1970. Last year it has been decided that each department (electronical, mechanical, architectural) will have its own CAD laboratory for computer graphics, based on a super minicomputer (CDC Cyber 170/720). The following software is available for CAAD : CD2000 (wireframe drawings), ICEM (solid modelling), TIGS (terminal independent graphics system), GOAL and BIBLE, ACA (integrated CAAD software). At the Technion teachers and architects which can educate CAAD are available. The following courses are teached : Computer Aided Architectural Design (I + II), Computer Methods in City Planning, Mathematical Models in Architectural Design, Design Course - Geometrical Modelling, Design Course - Solar Energy Design Seminar. It was decided that since next year the following courses will use CAAD : Design course - Geometrical Modelling and Appraisal, Morphology I, 2D-Design and Design Course - Passive Solar Communities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c1ae
authors	Gulliehsen, Eric and Chang, Ernest
year	1984
title	An Expert System for Generative Architectural Design
source	December, 1984. pp. 253-267. includes bibliography
summary	The mathematician-architect Christopher Alexander has devised a scientific theory of architectural design. He believes that all existing architectural entities can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language capable of generating design forms appropriate to a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. This paper presents a computer-based expert system which implements Alexander's design methodology
keywords	synthesis, expert systems, CAD, patterns, design, methods, architecture, theory
series	CADline
last changed	2003/06/02 10:24

_id	05b4
authors	Liang, You-Dong and Barsky, Brian A.
year	1984
title	A New Concept and Method for Line Clipping
source	ACM Transactions on Graphics. January, 1984. vol. 3: pp. 1-22 : ill. includes bibliography
summary	A new concept and method for line clipping is developed that describes clipping in an exact and mathematical form. The basic ideas form the foundation for a family of algorithms for two-dimensional, three-dimensional, and four-dimensional (homogeneous coordinates) line clipping. The line segment to be clipped is mapped into a parametric representation. From this, a set of conditions is derived that describes the interior of the clipping region. Observing that these conditions are all of similar form, they are rewritten such that the solution to the clipping problem is reduced to a simple max/min expression. For each dimension, the mathematics are discussed, an example is given, the algorithm is designed, and a performance test is conducted. The new algorithm is compared with the traditional Sutherland-Cohen clipping algorithm. Using randomly generated data, the new algorithm showed a 36 percent, 40 percent, and 79 percent improvement for two-dimensional, three-dimensional, and four- dimensional clipping, respectively. One of the advantages of this algorithm is the quick rejection of line segments that are invisible. In addition, this algorithm can be easily generalized for clipping against any convex viewing volume
keywords	algorithms, clipping, computer graphics, analysis
series	CADline
last changed	2003/06/02 13:58

_id	812d
authors	Peng, Q. S.
year	1984
title	An Algorithm for Finding the Intersection Lines Between Two B-Spline Surfaces
source	Computer Aided Design July, 1984. vol. 16: pp. 191-196 : ill. includes bibliography.
summary	A divide-and-conquer algorithm is presented for finding all the intersection lines between two B-spline surfaces. Each surface is organized as an n-branch tree. For each intersection line, an initial point is detected after a depth-first search along one tree, i.e. the host tree. Extrapolation methods are then used to trace the entire length of the line, thus the line appears naturally in a continuous form. Efficiency of the algorithm is achieved by employing of an adaptive division strategy and by the careful choice of the representation basis of the patches on both surfaces
keywords	logic, algorithms, B-splines, techniques, divide-and- conquer, intersection, curves, curved surfaces, representation
series	CADline
last changed	2003/06/02 10:24

_id	604b
authors	Radford, Antony D. and Stevens, Gary
year	1984
title	Style for 1984 : Computers and Building Form
source	pp. 131-143. includes bibliography
summary	The relationship between computers, building form and building style is examined. Speculations on future influences of the use of computers in the design process, in the construction process and in the control of buildings are based on some existing examples
keywords	CAD, architecture, design process, applications, style, building,control, synthesis
series	CADline
last changed	2003/06/02 13:58

_id	86c4
authors	Shaviv, Edna
year	1984
title	Climate and Building Design - Tradition, Research and Design Tools
source	Energy and Buildings. 1984. vol. 7: pp.55-69 : ill. tables. includes bibliography
summary	Important design parameters that influence the building thermal behavior and in particular natural cooling are discussed. Among these design parameters are: ventilation, evaporation, proper shading, orientation of the building and its proportions with respect to the orientation, the color of the building's envelope and its conductivity, the thermal mass of the building, night radiation to the sky and the stack effect. The latter is the katabatic and anabatic cooling. Different design tools aimed at the study of the influence of the climatological parameters on the form andÔ h)000*°° ÔŒ characteristics of buildings were developed in recent years. These tools help architects in designing houses with improved indoor thermal conditions without mechanical means, or with minimum energy consumptions. Several design tools, as well as design considerations and traditional constructions, are presented
keywords	Emphasis is placed on computer-aided design tools
series	CADline
email
last changed	2003/05/17 10:20

_id	2b48
authors	Shaviv, Edna
year	1984
title	A Design Tool for Determining the Form of Fixed and Movable Sunshades
source	ASHRAE Transactions. 1984. vol. 90: [14] p. : ill. and tables. includes bibliography: p. [7]
summary	A method for the design of fixed and movable external sunshaeds for windows is presented. The window can have any shape and be located on a wall having an arbitrary orientation. The fundamental idea is to use a computer to generate the entire envelope of the family of shading solutions that satisfies a prescribed set of shading requirements. The envelope of solutions serves as a nomogram on the basis of which sunshades are designed. Any sunshade designed following this nomogram satisfies the prescribed demands. The method creates an unlimited space of solutions, leaving the final design to the architect's imagination
keywords	evaluation, analysis, shading, design, methods, architecture, algorithms, energy
series	CADline
email
last changed	2003/05/17 10:20

_id	cf2009_poster_39
id	cf2009_poster_39
authors	Wang, Chung-Yang
year	2009
title	The Modular Units of CAD/CAM Fabrication
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	After Frank O’Gehry’s completion of the fish sculpture in Barcelona, the technique of CAD/CAM fabrication has gradually matured. Designers could use computer to acquire the freedom of form without most restrictions. Typical CAD/CAM fabrication can precisely capture the sections of 3D (three-dimensional) freeform and output those contours into 2D (two-dimensional) structures by computer assistance (Kolarevic 2001; Groover and Emory 1984). In the procedure, due to the accurate output of frameworks, designers could realize the outlines of complicated forms in a low error way. After making frames, architects have to attach suitable skins on the structures according to different situations of form (Lim 2006). It is a traditional CAD/CAM fabrication which has established for a long time.
keywords	CAD/CAM, Fabrication, Modular Units
series	CAAD Futures
type	poster
last changed	2009/08/21 07:39

_id	ddssar0031
id	ddssar0031
authors	Witt, Tom
year	2000
title	Indecision in quest of design
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Designers all start with a solution (Darke, 1984), with what is known (Rittel, 1969, 1970). Hans Menghol, Svein Gusrud and Peter Opvik did so with the chair in the 1970s. Not content with the knowledge of the chair, however, they walked backward to the ignorance of the question that has always elicited the solution of chair and asked themselves the improbable question, “What is a chair?” Their answer was the Balans chair. “Until the introduction of the Norwegian Balans (balance) chair, the multi-billion dollar international chair industry had been surprisingly homogeneous. This chair is the most radical of the twentieth century and probably since the invention of the chair-throne itself (Cranz 1998). Design theorists have tried to understand in a measurable way what is not measurable: the way that designers think. Rather than attempt to analyze something that cannot be taken apart, I attempt to illuminate methods for generating new knowledge through ways of seeing connections that are not logical, and in fact are sometimes ironic. Among the possibilities discussed in this dialogue are the methodological power of language in the form of metaphor, the power of the imagination in mind experiments, the power of mythological story telling, and the power of immeasurable intangibles in the generation of the new knowledge needed to design.
series	DDSS
last changed	2003/08/07 16:36

No more hits.