Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 88

Reformat results as: short short into frame detailed detailed into frame

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	avocaad_2001_15
id	avocaad_2001_15
authors	Henri Achten, Jos van Leeuwen
year	2001
title	Scheming and Plotting your Way into Architectural Complexity
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The problem of complexity underlies all design problems. With the advent of CAD however, our ability to truly represent complexity has increased considerably. Following the four waves of design methodology as distinguished by Cross (1984), we see changing architectural design attitudes with respect to complexity. Rather than viewing it as problematic issue, designers such as Koolhaas, van Berkel, Lynn, and Franke embrace complexity and make it a focus in their design work. The computer is an indispensable instrument in this approach. The paper discusses the current state of the art in architectural design positions on complexity and CAAD, and reflects in particular on the role of design representations in this discussion. It is advanced that a number of recent developments are based on an intensified use of design representations such as schema’s, diagrams, and interactive modelling techniques. Within the field of possibilities in this field, the authors discuss Feature-Based Modelling (FBM) as a formalism to represent knowledge of the design. It is demonstrated how the FBM approach can be used to describe graphic representations as used in design, and how other levels and kinds of design knowledge can be incorporated, in particular the less definite qualitative information in the early design phase. The discussion section concludes with an extrapolation of the current role of design representation in the design process, and advances a few positions on the advantage and disadvantage of this role in architectural design.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2885
authors	Lansdown, J. and Maver, T.W.
year	1984
title	CAD in Architecture and Building
source	Computer Aided Design, Vol 16, No 3
summary	CAAD tool have gradually come into use in architecture over the past years. Appraisal and evaluation of designs and design tools and the preparation of product innovations are discussed. Types of visualisation and flexible layout programs for CAAD are assessed. The areas which knowledge-based design systems should cover are discussed .
series	journal paper
email
last changed	2003/06/10 15:55

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	40d6
authors	Johnson, Robert E.
year	1984
title	The Integration of Economic Analysis and Computer-based Building Models
source	CIB W-65 Symposium. July, 1984. [19] p. : ill. includes bibliography
summary	Most current methods used to evaluate the economics of building designs are inadequate in that they focus on the evaluation of completed designs and do not assist in the development and creation of designs. They are used after most major design decisions have been made. This paper describes the first year of a two year research project (funded by the National Science Foundation, the U.S. Government) which seeks to integrate economic analysis techniques into design decision-making within the context of an interactive computer-aided architectural and engineering design system. Issues reviewed include the current state of computer software, existing economic analysis models and existing economic analysis software. A conclusion is reached that most economic analysis systems fall into the category of single purpose software and are not adaptable to the wide range of idiosyncratic evaluation models used in real estate, architecture, engineering, construction and building management. Objectives are proposed for a general purpose, interactive cost modeling system that is integrated with a geometric computer-based building model. Initial experiments with a prototype of this system at various stages of the design-construction-use process are discussed. Further development of this system as a research tool for exploring alternative economic modeling procedures is presented
keywords	analysis, evaluation, CAD, architecture, design, methods, economics, integration
series	CADline
last changed	2003/06/02 13:58

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
doi	https://doi.org/10.52842/conf.caadria.2004.005
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	ab9c
authors	Kvan, Thomas and Kvan, Erik
year	1999
title	Is Design Really Social
source	International Journal of Virtual Reality, 4:1
summary	There are many who will readily agree with Mitchell's assertion that "the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process." [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants, that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided, therefore, must permit the best communication and the best social interaction. We see a danger here, a pattern being repeated which may lead us into less than useful activities. As with several (popular) architectural design or modelling systems already available, however, computer system implementations all too often are poor imitations manual systems. For example, few in the field will argue with the statement that the storage of data in layers in a computer-aided drafting system is an dispensable approach. Layers derive from manual overlay drafting technology [Stitt 1984] which was regarded as an advanced (manual) production concept at the time many software engineers were specifying CAD software designs. Early implementations of CAD systems (such as RUCAPS, GDS, Computervision) avoided such data organisation, the software engineers recognising that object-based structures are more flexible, permitting greater control of data editing and display. Layer-based systems, however, are easier to implement in software, more familiar to the user and hence easier to explain, initially easier to use but more limiting for an experienced and thoughtful user, leading in the end to a lesser quality in resultant drawings and significant problems in output control (see Richens [1990], pp. 31-40 for a detailed analysis of such features and constraints). Here then we see the design for architectural software faithfully but inappropriately following manual methods. So too is there a danger of assuming that the best social interaction is that done face-to-face, therefore all collaborative design communications environments must mimic face-to-face.
series	journal paper
email
last changed	2003/05/15 10:29

_id	20a8
authors	Ruffle, Simon
year	1986
title	How Can CAD Provide for the Changing Role of the Architect?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 197-199
summary	At the RIBA Conference of 1981 entitled 'New Opportunities', and more recently at the 1984 ACA Annual Conference on 'Architects in Competition' there has been talk of marketing, new areas of practice, recapturing areas of practice lost to other professions, more accountability to client and public 'the decline of the mystique of the professional'. It is these issues, rather than technical advances in software and hardware, that will be the prime movers in getting computers into widespread practice in the future. In this chapter we will examine how changing attitudes in the profession might affect three practical issues in computing with which the author has been preoccupied in the past year. We will conclude by considering how, in future, early design stage computing may need to be linked to architectural theory, and, as this is a conference where we are encouraged to be outspoken, we will raise the issue of a computer-based theory of architecture.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	6c6f
authors	Shaviv, Edna
year	1984
title	National Situation Report: Technion (Haifa, Israel)
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.j7u
summary	In Israel there is only one School of Architecture. CAAD teaching has been introduced since 1969-1970. Last year it has been decided that each department (electronical, mechanical, architectural) will have its own CAD laboratory for computer graphics, based on a super minicomputer (CDC Cyber 170/720). The following software is available for CAAD : CD2000 (wireframe drawings), ICEM (solid modelling), TIGS (terminal independent graphics system), GOAL and BIBLE, ACA (integrated CAAD software). At the Technion teachers and architects which can educate CAAD are available. The following courses are teached : Computer Aided Architectural Design (I + II), Computer Methods in City Planning, Mathematical Models in Architectural Design, Design Course - Geometrical Modelling, Design Course - Solar Energy Design Seminar. It was decided that since next year the following courses will use CAAD : Design course - Geometrical Modelling and Appraisal, Morphology I, 2D-Design and Design Course - Passive Solar Communities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	e7cf
authors	Eastman, Charles M. and Preiss, K.
year	1984
title	A Review of Solid Shape Modelling Based on Integrity
source	Computer Aided Design March, 1984. vol. 16: pp. 66-80 : ill. includes bibliography.
summary	The potential benefits of using a canonical model for representing the shapes of solid objects has led to the design and implementation of a number of geometric modelers with varying capabilities. This paper reviews the approaches taken in solid modeling by defining the well-formedness conditions which must be implemented in any modeling system. The methods for satisfying the well-formedness constraints in the various solid modeling methods are reviewed, using the concept of integrity constraints. The incorporation of integrity constraints, both explicitly and implicitly, into solid modelers are considered, with particular focus on boundary modelers. The use of integrity constraints for defining shape families and assembly families are also presented. The result is a unified view of solid shape modeling systems that enables their classification and extension into particular application areas
keywords	solid modeling, constraints, B-rep
series	CADline
email
last changed	2003/05/17 10:15

_id	c1ae
authors	Gulliehsen, Eric and Chang, Ernest
year	1984
title	An Expert System for Generative Architectural Design
source	December, 1984. pp. 253-267. includes bibliography
summary	The mathematician-architect Christopher Alexander has devised a scientific theory of architectural design. He believes that all existing architectural entities can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language capable of generating design forms appropriate to a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. This paper presents a computer-based expert system which implements Alexander's design methodology
keywords	synthesis, expert systems, CAD, patterns, design, methods, architecture, theory
series	CADline
last changed	2003/06/02 10:24

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	46b0
authors	Schijf, Rik
year	1986
title	CAD in the Netherlands: Integrated CAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 176-184
summary	One of the things in which a small country can excel is its number of architects' offices per inhabitant. In the Netherlands this is approximately one in 6500, or twice the UK density (CBS, 1984; CICA, 1982). Of the 2150 Dutch offices, 88 per cent employ less than 10 people, which compares rather well with the British Situation. For the Netherlands it is interesting that its boom in CAD, on average an annual doubling or tripling for the next few years, is likely to coincide with a revolution in CAD itself. There is no doubt that very soon the personal and larger CAD systems will clash at supermicro-level.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0a6e
authors	Walters, Roger
year	1986
title	CAAD: Shorter-term Gains; Longerterm Costs?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 185-196
summary	Assessment of CAAD systems in use is complex: it needs careful qualifications and is often contradictory. It is suggested that little progress has been made in making sense of the impacts of computing on design and design organizations. Impacts are more diverse and complicated than has been assumed. Assessments tend to be either overtly optimistic or pessimistic, yet the need is to be realistic. Moreover, impacts have been the subject of speculation and marketing rather than systematic study. Carefully documented case studies of projects or longitudinal studies of organizational impacts remain the exception. This chapter draws upon recorded user experience reported elsewhere (Walters, 1983)' and presents an assessment of the performance in use of current production systems. It presents an end-user view and also identifies a number of outstanding design research topics It is suggested that different systems in different organizations in different settings will give rise to new impacts. A wide variety of outcomes is possible. It seems unlikely that any simple set of relationships can account for all the data that inquiry reveals. The task becomes one of identifying variables that lead to differential outcomes, as the same cause may lead to different effects (Attewell and Rule, 1984). This becomes a long-term task. Each optimistic impact may be countered by some other more pessimistic impact. Moreover, the changes brought about on design by computing are significant because both beneficial and non- beneficial impacts are present together. Impacts are held in a dynamic balance that is subject to constant evolution. This viewpoint accounts for otherwise conflicting conclusions. It is unlikely that the full range of impacts is yet known, and a wide range of impacts and outcomes already need to be taken into account. It seems that CAD alone cannot either guarantee improved design or that it inevitably leads to some diminished role for the designer. CAD can lead to either possible outcome, depending upon the particular combination of impacts present. Careful matching of systems to design organization and work environment is therefore needed. The design management role becomes crucial.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	af76
authors	Wong, Waycal C.H. and Will, Barry F.
year	1996
title	An Analysis of Using a Digital 3D Sundial as a Design and Decision Support Tool
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 131-141
doi	https://doi.org/10.52842/conf.caadria.1996.131
summary	The rapid speed of computer development brings new technologies, and these advances require innovative investigations to apply them optimally in the field of architecture. Burkett (1984) demonstrated that computer graphics can ‘provide an excellent opportunity for exploring solar issues in building redesign’. With one of the latest computer technologies, the "hyper-model” environment, this research investigates how to environment can become an aid in the design and decision support area. The research first reviews the communication between the architect and the client as described by Salisbury (1990). The review indicates that an interactive 3D hypermedia paradigm, with quick response, fast data manipulation and 3D visualization, offers a better communication media between the architect and the client. This research applies the "hyper-model” environment to design and develop a new methodology in collecting, analyzing, and presenting solar data. It also endeavors to show the possibilities of using the environment in design process.
series	CAADRIA
last changed	2022/06/07 07:57

_id	4b27
authors	Lansdown, John
year	1984
title	Knowledge for Designers
source	Architect`s journal. England: February, 1984. vol. 179: pp. 55-58
summary	The first of two articles discussing expert systems. Both design and construction are carried out within the framework of empirical rules and regulations designed more for ease of implementation and checking than scientific validity. On completion of a building, little follow up research is done on the way it is used or on the way in which the assumption made in its design are borne out in practice. This present two problems: How to make information from disparate sources easily available to designers and constructors, and how to make them aware that they need this information. This paper describes how a special type of computer programming might assist in solving these problems
keywords	design, construction, building, expert systems, knowledge base, systems, programming, life cycle
series	CADline
last changed	1999/02/12 15:09

_id	c9c1
authors	Basili, Victor R. and Perricone, Barry T.
year	1984
title	Software Errors and Complexity : An Empirical Investigation
source	communications of the ACM. January, 1984. vol. 27: pp. 42-52 : ill. includes bibliography
summary	The relationships between the frequency and distribution of errors during software development, the maintenance of the developed software, and a the influence of a variety of environmental factors on software development were analyzed. These factors include the complexity of the software, the developer's experience with the application, and the reuse of existing design and code. Such relationships can not only provide an insight into the characteristics of computer software development and the effects that the environment can have on the product, but also improve its reliability and quality. The study is based on data derived from a medium- scale software development project
keywords	software, engineering, programming, reliability
series	CADline
last changed	2003/06/02 13:58

For more results click below: