Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 90

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	4e4e
authors	Boissonnat, Jean-Daniel
year	1984
title	Geometric Structures for Three- Dimensional Shape Representation
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 266-286 : ill. includes bibliography
summary	Different geometric structures are investigated in the context of discrete surface representation. It is shown that minimal representations (i.e., polyhedra) can be provided by a surface-based method using nearest neighbors structures or by a volume-based method using the Delaunay triangulation. Both approaches are compared with respect to various criteria, such as space requirements, computation time, constraints on the distribution of the points, facilities for further calculations, and agreement with the actual shape of the object
keywords	algorithms, polyhedra, curves, curved surfaces, solids, representation, geometric modeling, data structures
series	CADline
last changed	1999/02/12 15:07

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	88e0
authors	Lee, Y.T., De Pennington, P. and Shaw, N.K.
year	1984
title	Automatic Finite- Element Mesh Generation from Geometric Models : A Point Based Approach
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 287-311 : ill. includes bibliography
summary	A novel algorithm for automatic finite-element mesh generation is described. It uses constructive solid geometry to provide the geometric data for the object to be meshed. The geometric definition of the object and a value for the required mesh density are the only inputs. The method consists of two stages: point generation and mesh construction over the points. It has been implemented in two dimensions and is capable of generating predominantly 'good' quadrilateral elements. Triangular elements are only created in circumstances under which quadrilateral elements are not feasible
keywords	solids, geometric modeling, finite elements, analysis, CSG
series	CADline
last changed	2003/06/02 13:58

_id	05b4
authors	Liang, You-Dong and Barsky, Brian A.
year	1984
title	A New Concept and Method for Line Clipping
source	ACM Transactions on Graphics. January, 1984. vol. 3: pp. 1-22 : ill. includes bibliography
summary	A new concept and method for line clipping is developed that describes clipping in an exact and mathematical form. The basic ideas form the foundation for a family of algorithms for two-dimensional, three-dimensional, and four-dimensional (homogeneous coordinates) line clipping. The line segment to be clipped is mapped into a parametric representation. From this, a set of conditions is derived that describes the interior of the clipping region. Observing that these conditions are all of similar form, they are rewritten such that the solution to the clipping problem is reduced to a simple max/min expression. For each dimension, the mathematics are discussed, an example is given, the algorithm is designed, and a performance test is conducted. The new algorithm is compared with the traditional Sutherland-Cohen clipping algorithm. Using randomly generated data, the new algorithm showed a 36 percent, 40 percent, and 79 percent improvement for two-dimensional, three-dimensional, and four- dimensional clipping, respectively. One of the advantages of this algorithm is the quick rejection of line segments that are invisible. In addition, this algorithm can be easily generalized for clipping against any convex viewing volume
keywords	algorithms, clipping, computer graphics, analysis
series	CADline
last changed	2003/06/02 13:58

_id	c8c3
authors	Schucker, Kurt J.
year	1984
title	Fuzzy Sets, Natural Language Compositions, and Risk Analysis
source	xv, 192 p. : ill. Rockville, Maryland: Computer science press, inc., 1984. includes bibliography: p. 155-185 and index
summary	A new approach to analyze the risks a computer system may be subject to. A non-numeric method that allows natural language expression is presented. A tutorial for implementation of the ideas of fuzzy set theory in general, and of the linguistic approach to risk analysis in particular, are discussed
keywords	natural languages, fuzzy logic, analysis, programming
series	CADline
last changed	2003/06/02 13:58

_id	2b48
authors	Shaviv, Edna
year	1984
title	A Design Tool for Determining the Form of Fixed and Movable Sunshades
source	ASHRAE Transactions. 1984. vol. 90: [14] p. : ill. and tables. includes bibliography: p. [7]
summary	A method for the design of fixed and movable external sunshaeds for windows is presented. The window can have any shape and be located on a wall having an arbitrary orientation. The fundamental idea is to use a computer to generate the entire envelope of the family of shading solutions that satisfies a prescribed set of shading requirements. The envelope of solutions serves as a nomogram on the basis of which sunshades are designed. Any sunshade designed following this nomogram satisfies the prescribed demands. The method creates an unlimited space of solutions, leaving the final design to the architect's imagination
keywords	evaluation, analysis, shading, design, methods, architecture, algorithms, energy
series	CADline
email
last changed	2003/05/17 10:20

_id	ecaade2013_094
id	ecaade2013_094
authors	Tomé, Ana; Heitor, Teresa and Nunes, Mário
year	2013
title	Space-Use Interactions Described Through Computer Vision
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 403-412
doi	https://doi.org/10.52842/conf.ecaade.2013.1.403
wos	WOS:000340635300042
summary	This paper examines analytical procedures aimed at the study of the functional condition of architectural artefacts and, as a result, the promotion of a better understanding of the connections established with spatial conditions. The goal is to contribute to the development of techniques based on computer vision of mobility and users’ interaction, producing non-arbitrary registries of their movement/navigation and occupancy/co-presence patterns via a quantitatively based analysis.Movement/navigation and occupancy/co-presence patterns were correlated with configurational properties obtained by applying the space syntax descriptive model (Hillier and Hanson, 1984). It was possible to analyse relations between the spatial configuration and the movement/navigation and occupancy/co-presence patterns, a key question within the architectural conceptual process.
keywords	Space-use analysis method; computer vision; movement/navigation patterns; occupation/co-presence patterns; occupation/movement indices.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	409c
authors	Akin, Omer, Flemming, Ulrich and Woodbury, Robert F.
year	1984
title	Development of Computer Systems for Use in Architectural Education
source	1984. ii, 47 p. includes bibliography
summary	Computers have not been used in education in a way that fosters intellectual development of alternate approaches to design. Sufficient theory exists to use computing devices to support other potentially fruitful approaches to design. A proposal is made for the development of a computer system for architectural education which is built upon a particular model for design, that of rational decision making. Within the framework provided by the model, a series of courseware development projects are proposed which together with hardware acquisitions constitute a comprehensive computer system for architectural education
keywords	architecture, education, design, decision making
series	CADline
email
last changed	2003/06/02 13:58

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c1ae
authors	Gulliehsen, Eric and Chang, Ernest
year	1984
title	An Expert System for Generative Architectural Design
source	December, 1984. pp. 253-267. includes bibliography
summary	The mathematician-architect Christopher Alexander has devised a scientific theory of architectural design. He believes that all existing architectural entities can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language capable of generating design forms appropriate to a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. This paper presents a computer-based expert system which implements Alexander's design methodology
keywords	synthesis, expert systems, CAD, patterns, design, methods, architecture, theory
series	CADline
last changed	2003/06/02 10:24

_id	2391
authors	Hammond, Brian G. and Leifer, Dave
year	1984
title	A Graphics Interface to Complement Traditional Techniques
source	1984? pp. 321-329 : ill. includes bibliography
summary	Noting the reluctance of architects in small private practices to adopt CAAD aids, the crudity of existing graphic interfaces is identified as an inhibiting factor. A suite of computer programs currently under development are described which are designed to permit the input of geometric plan forms by traditional pencil and paper techniques, whilst utilizing the computers processing power to edit and manipulate the data so `captured'
keywords	CAD, architecture, user interface, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	63a9
authors	Hellgardt, Michael
year	1993
title	Architectural Theory and Design Grammars
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i6u
summary	The idea of artificial brains and artificial intelligence (AI) has been subject to criticism. The objection of J. Searle, for instance, which has been published in 1984 and which was partially directly addressed to one of the centres of AI, the Carnegie Mellon University in Pittsburgh, is mainly based on two points: (1) interactions between physiological and mental functions, and (2) the intentionality and context-relatedness of meaning. - With an emphasis on architectural design, this paper is about the second point, because the problem of meaning is a neuralgic point in the discussion of "artificial intelligence in design" (AID). Technical parameters are incompatible with mechanisms of meaning in any field of artistic, cultural or non-technical expression. This point, that is the relation between acts of meaning and acts of technical problem-solving and, connectedly, the relation between technological and architectural design, has been widely ignored in the discussion on AID. The development seems to be dominated by the tacit assumption that architecture can be articulated and generated purely in technical and formal terms of information processing beyond the field of architecture itself. Design and shape grammars have become a well established field in the discussion of AID, also with respect to architecture. But questions of architectural history and theory are touched on only incidentally and not sufficiently in this discussion. The problem is not, in other words, simply to include more or less unrelated cases of architecture, or architectural concepts -even if these are famous ones, such as Laugier's original hut for instance but to establish structural relations between arguments of architectural theory and arguments of AID.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e799
authors	Howes, Jaki
year	1986
title	Computer Education in Schools of Architecture and the Needs of Practice
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 45-48
doi	https://doi.org/10.52842/conf.ecaade.1986.045
summary	In April 1985 there was a meeting (at Huddersfield Polytechnic) or representatives from 26 Schools of Architecture. At this, concern was expressed about the lack of direction from the RIBA with regard to the appropriate level of computer teaching on architectural courses. In addition, it was felt that it was essential that at least one member of a Visiting Board panel should be computer literate and in a position to give advice. These points were raised at the RIBA Computer Committee later in 1985, and the committee's attention was also drawn to comments contained in the report by HM Inspector on Public Sector Education in Architecture (1985) based on investigations made during 1984.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	40d6
authors	Johnson, Robert E.
year	1984
title	The Integration of Economic Analysis and Computer-based Building Models
source	CIB W-65 Symposium. July, 1984. [19] p. : ill. includes bibliography
summary	Most current methods used to evaluate the economics of building designs are inadequate in that they focus on the evaluation of completed designs and do not assist in the development and creation of designs. They are used after most major design decisions have been made. This paper describes the first year of a two year research project (funded by the National Science Foundation, the U.S. Government) which seeks to integrate economic analysis techniques into design decision-making within the context of an interactive computer-aided architectural and engineering design system. Issues reviewed include the current state of computer software, existing economic analysis models and existing economic analysis software. A conclusion is reached that most economic analysis systems fall into the category of single purpose software and are not adaptable to the wide range of idiosyncratic evaluation models used in real estate, architecture, engineering, construction and building management. Objectives are proposed for a general purpose, interactive cost modeling system that is integrated with a geometric computer-based building model. Initial experiments with a prototype of this system at various stages of the design-construction-use process are discussed. Further development of this system as a research tool for exploring alternative economic modeling procedures is presented
keywords	analysis, evaluation, CAD, architecture, design, methods, economics, integration
series	CADline
last changed	2003/06/02 13:58

_id	e0a3
authors	Johnson, Robert E.
year	1984
title	Computer-Aided Energy Economics for Early Concept Design Analysis
source	Building Economics, International Symposium Proceedings (3rd : Canada). 1984? vol. 3: pp.46-57 : ill. includes bibliography
summary	Decisions that have the greatest impact on energy cost performance are made very early in the design process. The problem is that these early design decisions are rarely tested thoroughly until very late in design. Usually this is due to the difficulties inherent in the use of the more sophisticated analysis procedures. Hourly energy computer simulations are costly to use, often require detailed input preparation, and use large ''main-frame' computers. Easier to use energy evaluation tools such as manual calculations and simplified computer programs do not yield reliable results. This is particularly true when passive solar design solutions are being tested. However, even the sophisticated approaches often have a limited ability to comprehensively model the economic implications of the more accurate energy simulations. This paper is intended to describe efforts at the University of Michigan to develop a more integrated approach to the assessment of energy economics - one that may be used at the earliest stages of concept design. The approach taken has been to concentrate on developing interactive, easy to use computer programs to describe building design proposals. This computer-generated building model is then used to automatically generate the information required to run a large, sophisticated energy analysis program developed by the U.S. Army Corps of Engineers (BLAST). Total life cycle cost analysis is performed either using procedures within BLAST or an 'electronic spreadsheet' system. Perceived deficiencies in the current state of this energy/cost evaluation system are described, and future research directions are presented
keywords	architecture, energy, analysis, CAD, economics, design, methods
series	CADline
last changed	2003/06/02 10:24

_id	4eaf
authors	Kalay, Yehuda E.
year	1984
title	A Database Management Approach to CAD/CAM Systems Integration
source	December, 1984. 13 p. : ill. includes bibliography
summary	Facilitating the communication between different CAD/CAM systems is rapidly becoming an important issue, as more systems reach the market. A solution to the communication problem can be found if it is considered part of the more general problem of managing the complex information associated with the representation of physical artifacts and environments in the memory of computers, thereby accounting for the operators that are used for accessing the data as well as the data itself. Database management systems have provided powerful solutions to information management problems in a variety of disciplines and enjoy a broad and rigorous research foundation. If the techniques, methods and systems that were developed for database management could be utilized for CAD/CAM integration, they would save a considerable duplication of effort, enhance the integrity of the data, and bring to bear the results and advances that have been achieved over a long period of hard work
keywords	CAD, CAM, relational database, integration, architecture
series	CADline
email
last changed	2003/06/02 10:24

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
doi	https://doi.org/10.52842/conf.caadria.2004.005
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

For more results click below: