Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 89

Reformat results as: short short into frame detailed detailed into frame

_id	6050
authors	Bentley, Jon L.
year	1984
title	Algorithm Design Techniques -- Programming Pearls
source	communications of the ACM. September, 1984. vol. 27: pp. 865-871 : ill
summary	The problem arose in one-dimensional pattern recognition: The input is a vector X of N real numbers; the output is the maximum sum found in any contiguous subvector of the input. The problem is when some of the numbers are negative. This column is built around that problem with an emphasis on the algorithms that solve it and the techniques used to design them
keywords	techniques, programming, algorithms, pattern recognition
series	CADline
last changed	2003/06/02 13:58

_id	676a
authors	Valiant, L.G.
year	1984
title	A Theory of the Learnable
source	Communications of the ACM. November,1984. vol. 27: pp. 1134-1142. includes bibliography
summary	In this paper the author regards learning as the phenomenon of knowledge acquisition in the absence of explicit programming. The author gives a precise methodology for studying this phenomenon from a computational viewpoint. It consists of choosing an appropriate information gathering mechanism, the learning protocol, and exploring the class of concepts that can be learned using it in a reasonable (polynomial) number of steps. Although inherent algorithmic complexity appears to set serious limits on the range of concepts that can be learned, the author shows that there are some important nontrivial classes of propositional concepts that can be learned in a realistic sense
keywords	AI, learning, natural languages, research, techniques, design, knowledge acquisition, theory
series	CADline
last changed	2003/06/02 13:58

_id	ea4c
authors	Chang, Hsi and Iyengar, S. Sitharama
year	1984
title	Efficient Algorithms to Globally Balance a Binary Search Tree
source	Communications of the ACM. July, 1984. vol. 27: pp. 695-702. includes bibliography
summary	A binary search tree can be globally balanced by readjustment of pointers or with a sorting process in O(n) time, n being the total number of nodes. This paper presents three global balancing algorithms, one of which uses folding with the other two adopting parallel procedures. These algorithms show improvement in time efficiency over some sequential algorithms when applied to large binary search trees. A comparison of various algorithms is presented
keywords	techniques, parallel processing, algorithms, search, sorting
series	CADline
last changed	2003/06/02 13:58

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
doi	https://doi.org/10.52842/conf.caadria.2004.005
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	6045
authors	Rychener, Michael D.
year	1984
title	Expert systems for Engineering Design : Problem Components, Technique, & Prototypes
source	31 p. : charts Design Research Center, CMU, March, 1984. DRC-0502-83. includes bibliography
summary	A number of problems in diagnosis and engineering design can be solved by using current expert system techniques. This paper enumerates the main components of such problems and the steps that are taken in solving them. A few prototypical artificial intelligence systems embody techniques that can be applied to engineering problems are surveyed, and their relevance to components of design problems is discussed. Some expert system in design domain are summarized, with emphasis on aspects that can illustrate wider applicability of the techniques
keywords	expert systems, AI, problem solving, design, methods, engineering
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4e4e
authors	Boissonnat, Jean-Daniel
year	1984
title	Geometric Structures for Three- Dimensional Shape Representation
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 266-286 : ill. includes bibliography
summary	Different geometric structures are investigated in the context of discrete surface representation. It is shown that minimal representations (i.e., polyhedra) can be provided by a surface-based method using nearest neighbors structures or by a volume-based method using the Delaunay triangulation. Both approaches are compared with respect to various criteria, such as space requirements, computation time, constraints on the distribution of the points, facilities for further calculations, and agreement with the actual shape of the object
keywords	algorithms, polyhedra, curves, curved surfaces, solids, representation, geometric modeling, data structures
series	CADline
last changed	1999/02/12 15:07

_id	05b4
authors	Liang, You-Dong and Barsky, Brian A.
year	1984
title	A New Concept and Method for Line Clipping
source	ACM Transactions on Graphics. January, 1984. vol. 3: pp. 1-22 : ill. includes bibliography
summary	A new concept and method for line clipping is developed that describes clipping in an exact and mathematical form. The basic ideas form the foundation for a family of algorithms for two-dimensional, three-dimensional, and four-dimensional (homogeneous coordinates) line clipping. The line segment to be clipped is mapped into a parametric representation. From this, a set of conditions is derived that describes the interior of the clipping region. Observing that these conditions are all of similar form, they are rewritten such that the solution to the clipping problem is reduced to a simple max/min expression. For each dimension, the mathematics are discussed, an example is given, the algorithm is designed, and a performance test is conducted. The new algorithm is compared with the traditional Sutherland-Cohen clipping algorithm. Using randomly generated data, the new algorithm showed a 36 percent, 40 percent, and 79 percent improvement for two-dimensional, three-dimensional, and four- dimensional clipping, respectively. One of the advantages of this algorithm is the quick rejection of line segments that are invisible. In addition, this algorithm can be easily generalized for clipping against any convex viewing volume
keywords	algorithms, clipping, computer graphics, analysis
series	CADline
last changed	2003/06/02 13:58

_id	2c1b
authors	Woolf, Beverly and McDonald, David D.
year	1984
title	Building a Computer Tutor : Design Issues
source	IEEE Computer. September, 1984. vol. 17: pp. 61-73 : diagrams. includes bibliography
summary	An effective tutor must deal with a fundamental problem of communication: to determine how messages are received and understood and to formulate appropriate answers. This means that a tutor, more than a speaker, must verify that both parties know what information has been covered, what is missing, and which communication might be erroneous. In this article the authors discuss how an understanding of a student can be constructed in an artificial intelligence program and how this understanding, coupled with a facility for language generation, can be used to build flexible machine tutor
keywords	education, communication, information, learning, AI, systems
series	CADline
last changed	2003/06/02 13:58

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	f9f4
authors	Cook, R.L., Porter, Th. and Carpenter, L.
year	1984
title	Distributed Ray Tracing
source	Computer Graphics, vol. 18, no. 3, pp. 137145, July 1984. SIGGRAPH '84 Proceedings
summary	Ray tracing is one of the most elegant techniques in computer graphics. Many phenomena that are difficult or impossible with other techniques are simple with ray tracing, including shadows, reflections, and refracted light. Ray directions, however, have been determined precisely, and this has limited the capabilities of ray tracing. By distributing the directions of the rays according to the analytic function they sample, ray tracing can incorporate fuzzy phenomena. This provides correct and easy solutions to some previously unsolved or partially solved problems, including motion blur, depth of field, penumbras, translucency, and fuzzy reflections. Motion blur and depth of field calculations can be integrated with the visible surface calculations, avoiding the problems found in previous methods.
series	journal paper
last changed	2003/04/23 15:14

_id	26de
authors	Enderle, G., K. Kansy and Pfaff, G.
year	1984
title	Computer Graphics Programming : GKS - the graphics standard
source	542 p. : ill. (some col.) Berlin: Springer-Verlag, 1984. includes bibliography: p. 527-532 and index. -- (Symbolic Computation Series)
summary	Covers computer graphics programming on the basis of the Graphical Kernel System. It gives an overview over the GKS concepts, the history of the GKS design and the various system interfaces. A detailed description of the application of GKS functions both in PASCAL and FORTRAN is a significant part
keywords	standards, computer graphics, GKS, programming
series	CADline
last changed	2003/06/02 10:24

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	653f
authors	Hedelman, Harold
year	1984
title	A Data Flow Approach to Procedural Modeling
source	IEEE Computer Graphics and Applications January, 1984. vol. 4: pp. 16-26 : ill. (some col.). includes bibliography.
summary	Computer graphics tasks generally involve either modeling or viewing. Modeling combines primitive building blocks (polygons, patches, etc.) into data structures that represent entire objects and scenes. To visualize a modeled object, its data structure is input to appropriate viewing routines. While a great deal has been done on modeling and viewing with geometric primitives, little has been published on the use of procedural primitives. A procedural model is a step-by-step guide for constructing a representation of an object or process, i.e., a program. It is also a function, a 'black box' with a set of inputs and outputs. Two questions are especially pertinent to the work presented in this article
keywords	First, what are the advantages of both data flow methods and procedural modeling? Second, how can such models be used in composition? computer graphics, modeling, information, management
series	CADline
last changed	1999/02/12 15:08

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

For more results click below: