Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 76

Reformat results as: short short into frame detailed detailed into frame

_id	8087
authors	Boehm, Barry W., Penedo, Maria H. and Stuckle, Don E. (et al)
year	1984
title	A Software Development Environment for Improving Productivity
source	IEEE Computer. June, 1984. pp. 30-44 : ill. includes bibliography
summary	The software productivity system (SPS) was developed to support project activities. It involves a set of strategies, including the work environment; the evaluation and procurement of hardware equipment; the provision for immediate access to computing resources through local area networks; the building of an integrated set of tools to support the software development life cycle and all project personnel; and a user support function to transfer new technology. All of these strategies are being accomplished incrementally. The current architecture is VAX-based and uses the Unix operating system, a wideband local network, and a set of software tools. The article describes the steps that led to the creation of the software productivity project and its components and summarized the requirements analyses on which the SPS was based
keywords	productivity, software, hardware, programming
series	CADline
last changed	2003/06/02 10:24

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	af76
authors	Wong, Waycal C.H. and Will, Barry F.
year	1996
title	An Analysis of Using a Digital 3D Sundial as a Design and Decision Support Tool
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 131-141
doi	https://doi.org/10.52842/conf.caadria.1996.131
summary	The rapid speed of computer development brings new technologies, and these advances require innovative investigations to apply them optimally in the field of architecture. Burkett (1984) demonstrated that computer graphics can ‘provide an excellent opportunity for exploring solar issues in building redesign’. With one of the latest computer technologies, the "hyper-model” environment, this research investigates how to environment can become an aid in the design and decision support area. The research first reviews the communication between the architect and the client as described by Salisbury (1990). The review indicates that an interactive 3D hypermedia paradigm, with quick response, fast data manipulation and 3D visualization, offers a better communication media between the architect and the client. This research applies the "hyper-model” environment to design and develop a new methodology in collecting, analyzing, and presenting solar data. It also endeavors to show the possibilities of using the environment in design process.
series	CAADRIA
last changed	2022/06/07 07:57

_id	2b48
authors	Shaviv, Edna
year	1984
title	A Design Tool for Determining the Form of Fixed and Movable Sunshades
source	ASHRAE Transactions. 1984. vol. 90: [14] p. : ill. and tables. includes bibliography: p. [7]
summary	A method for the design of fixed and movable external sunshaeds for windows is presented. The window can have any shape and be located on a wall having an arbitrary orientation. The fundamental idea is to use a computer to generate the entire envelope of the family of shading solutions that satisfies a prescribed set of shading requirements. The envelope of solutions serves as a nomogram on the basis of which sunshades are designed. Any sunshade designed following this nomogram satisfies the prescribed demands. The method creates an unlimited space of solutions, leaving the final design to the architect's imagination
keywords	evaluation, analysis, shading, design, methods, architecture, algorithms, energy
series	CADline
email
last changed	2003/05/17 10:20

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	7789
authors	Heckbert, P.S.
year	1984
title	Survey of Texture Mapping
source	IEEE Computer Graphics & Applications, Vol.6, No. 11, Nov. 1984, pp. 56-67
summary	Texture mapping is one of the most successful new techniques in high quality image synthesis. Its use can enhance the visual richness of raster scan images immensely while entailing only a relatively small increase in computation. The technique has been applied to a number of surface attributes: surface color, surface normal, specularity, transparency, illumination, and surface displacement, to name a few. Although the list is potentially endless, the techniques of texture mapping are essentially the same in all cases. We will survey the fundamentals of texture mapping, which can be split into two topics: the geometric mapping that warps a texture onto a surface, and the filtering that is necessary in order to avoid aliasing. An extensive bibliography is included.
series	journal paper
last changed	2003/04/23 15:50

_id	c159
authors	Bentley, Jon L.
year	1984
title	A Case Study in Applied Algorithm Design
source	IEEE Computer. February, 1984. vol. 17: pp. 75-88 : ill. tables. includes bibliography
summary	In this article the author describes how an algorithm design was used in the development of a small routine in a software system
keywords	algorithms, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	86c4
authors	Shaviv, Edna
year	1984
title	Climate and Building Design - Tradition, Research and Design Tools
source	Energy and Buildings. 1984. vol. 7: pp.55-69 : ill. tables. includes bibliography
summary	Important design parameters that influence the building thermal behavior and in particular natural cooling are discussed. Among these design parameters are: ventilation, evaporation, proper shading, orientation of the building and its proportions with respect to the orientation, the color of the building's envelope and its conductivity, the thermal mass of the building, night radiation to the sky and the stack effect. The latter is the katabatic and anabatic cooling. Different design tools aimed at the study of the influence of the climatological parameters on the form andÔ h)000*°° ÔŒ characteristics of buildings were developed in recent years. These tools help architects in designing houses with improved indoor thermal conditions without mechanical means, or with minimum energy consumptions. Several design tools, as well as design considerations and traditional constructions, are presented
keywords	Emphasis is placed on computer-aided design tools
series	CADline
email
last changed	2003/05/17 10:20

_id	a688
authors	Walters, R. J.
year	1984
title	Towards and End User View of Design Systems
source	1984? pp. 17-27 : tables. includes bibliography
summary	Based upon detailed reporting of CAD use in hospital projects, an end user's view of design systems is developed. From the recorded user experience system development, implementation, performance in use and effects upon design practice are assessed. Aspects of user technique are developed. Current systems are found to be flawed but satisfactory results may be obtained under the right conditions. These are identified. The range of factors required in the development of an end user view of design systems also identified. An evaluation of the use of OXSYS/BDS on Milton Keynes DGH is presented together with an assessment of CAD use (both BDS and GDS) on health building projects at Oxford RHA. The paper summaries a detailed report (Walters 83). The paper is presented in 4 parts: an introduction, results of a detailed case study and an assessment leading towards an end user view of current design systems
keywords	design, CAD, systems, applications, practice, user interface, evaluation
series	CADline
last changed	2003/06/02 13:58

_id	409c
authors	Akin, Omer, Flemming, Ulrich and Woodbury, Robert F.
year	1984
title	Development of Computer Systems for Use in Architectural Education
source	1984. ii, 47 p. includes bibliography
summary	Computers have not been used in education in a way that fosters intellectual development of alternate approaches to design. Sufficient theory exists to use computing devices to support other potentially fruitful approaches to design. A proposal is made for the development of a computer system for architectural education which is built upon a particular model for design, that of rational decision making. Within the framework provided by the model, a series of courseware development projects are proposed which together with hardware acquisitions constitute a comprehensive computer system for architectural education
keywords	architecture, education, design, decision making
series	CADline
email
last changed	2003/06/02 13:58

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	4685
authors	Barsky, Brian A.
year	1984
title	A Description and Evaluation of Various 3-D Models
source	IEEE Computer Graphics and Applications. January, 1984. vol. 4: pp. 38-52 : ill. Includes bibliography
summary	The use of parametric curves and surfaces for object modeling in computer graphics is becoming increasingly popular. There is sometimes, however, a reluctance to use them because it seems that the added power they give is more than offset by the complexity of their formulations and their computations. The purpose of this article is to clarify their meanings and uses and show how much they have in common behind the diversity of their formulations. The author discusses the properties and benefits of using the parametric Hermite, Coons, Bezier, B-spline, and Beta-spline curve and surface formulations
keywords	Hermite, Coons, curved surfaces, Bezier, curves, B- splines, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	4e4e
authors	Boissonnat, Jean-Daniel
year	1984
title	Geometric Structures for Three- Dimensional Shape Representation
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 266-286 : ill. includes bibliography
summary	Different geometric structures are investigated in the context of discrete surface representation. It is shown that minimal representations (i.e., polyhedra) can be provided by a surface-based method using nearest neighbors structures or by a volume-based method using the Delaunay triangulation. Both approaches are compared with respect to various criteria, such as space requirements, computation time, constraints on the distribution of the points, facilities for further calculations, and agreement with the actual shape of the object
keywords	algorithms, polyhedra, curves, curved surfaces, solids, representation, geometric modeling, data structures
series	CADline
last changed	1999/02/12 15:07

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ec87
authors	Buchanan, Bruce G. and Shortliffe, Edward H. (editors)
year	1984
title	Rule- Based Expert Systems : The MYCIN Experiments of the Stanford Heuristic Programming Project
source	xix, 748 p. Reading, Mass.: Addison-Wesley Pub. Co., 1984. includes bibliography: p. 717-738 and subject index
summary	A detailed look at MYCIN, an expert system for diagnosing bacterial infections and prescribing treatment for them. Issues covered include detailed examinations of knowledge acquisition, reasoning, explanation, tutoring, performance evaluation, and human interface
keywords	AI, expert systems, knowledge acquisition, representation, reasoning, user interface
series	CADline
last changed	2003/06/02 13:58

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	6054
authors	Cook, R.L.
year	1984
title	Shade Trees
source	Computer Graphics, Vol. 18, No.3, pp.223-23 1
summary	Shading is an important part of computer imagery, but shaders have been based on fixed models to which all surfaces must conform. As computer imagery becomes more sophisticated, surfaces have more complex shading characteristics and thus require a less rigid shading model. This paper presents a flexible tree-structured shading model that can represent a wide range of shading characteristics. The model provides an easy means for specifying complex shading characteristics. It is also efficient because it can tailor the shading calculations to each type of surface.
series	journal paper
last changed	2003/04/23 15:14

For more results click below: