Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 99

Reformat results as: short short into frame detailed detailed into frame

_id	2667
authors	Gonzalez, C.J., Williams, M.H. and Atichison, I.E.
year	1984
title	Evaluation of the Effectiveness of PROLOG for a CAD Application
source	IEEE Computer Graphics and Applications March, 1984. vol. 4: pp. 67-75 : ill. includes bibliography.
summary	A comparison between PROLOG and PASCAL by implementing them on a PDP-11/34 in order to study whether PROLOG could be used as a language for programming CAD applications and if so how could it be used. To obtain a fair perspective Pascal was chosen as a model for programming languages because it is well structured, embodying all the control structures required for structured programming and providing a wide range of data structure like PROLOG
keywords	PROLOG, PASCAL, CAD, applications, programming, languages
series	CADline
last changed	2003/06/02 14:41

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	653f
authors	Hedelman, Harold
year	1984
title	A Data Flow Approach to Procedural Modeling
source	IEEE Computer Graphics and Applications January, 1984. vol. 4: pp. 16-26 : ill. (some col.). includes bibliography.
summary	Computer graphics tasks generally involve either modeling or viewing. Modeling combines primitive building blocks (polygons, patches, etc.) into data structures that represent entire objects and scenes. To visualize a modeled object, its data structure is input to appropriate viewing routines. While a great deal has been done on modeling and viewing with geometric primitives, little has been published on the use of procedural primitives. A procedural model is a step-by-step guide for constructing a representation of an object or process, i.e., a program. It is also a function, a 'black box' with a set of inputs and outputs. Two questions are especially pertinent to the work presented in this article
keywords	First, what are the advantages of both data flow methods and procedural modeling? Second, how can such models be used in composition? computer graphics, modeling, information, management
series	CADline
last changed	1999/02/12 15:08

_id	4eaf
authors	Kalay, Yehuda E.
year	1984
title	A Database Management Approach to CAD/CAM Systems Integration
source	December, 1984. 13 p. : ill. includes bibliography
summary	Facilitating the communication between different CAD/CAM systems is rapidly becoming an important issue, as more systems reach the market. A solution to the communication problem can be found if it is considered part of the more general problem of managing the complex information associated with the representation of physical artifacts and environments in the memory of computers, thereby accounting for the operators that are used for accessing the data as well as the data itself. Database management systems have provided powerful solutions to information management problems in a variety of disciplines and enjoy a broad and rigorous research foundation. If the techniques, methods and systems that were developed for database management could be utilized for CAD/CAM integration, they would save a considerable duplication of effort, enhance the integrity of the data, and bring to bear the results and advances that have been achieved over a long period of hard work
keywords	CAD, CAM, relational database, integration, architecture
series	CADline
email
last changed	2003/06/02 10:24

_id	eacf
authors	Lantz, Keith A. and Nowicki, William I.
year	1984
title	Structured Graphics for Distributed Systems
source	ACM Transactions on Graphics January, 1984. vol. 3: pp. 23-51 : ill.
summary	includes bibliography: pp. 48-51. One of the most important functions of an intelligent workstation is to provide a state-of-the-art user interface to distributed resources. One aspect of such an interface is virtual terminal support for both local and remote applications with a range of requirements, including graphics. To ensure good response for remote applications in particular, the bulk of user interaction must be handled local to the workstation. Therefore, the terminal management software on the workstation must provide object modeling as well as viewing facilities, in contrast to most contemporary graphics systems. One way of doing this is to support structured display files. It is equally important to support simultaneous access to multiple applications ; thus the terminal management software must provide window system facilities. Lastly, since the terminal management software should present a common interface to both local and remote applications, the workstation itself should be regarded as a multifunction component of the distributed system and not strictly as a terminal or a personal computer. This paper presents the system architecture and protocols necessary to achieve these goals and evaluates an existing implementation
keywords	user interface, windowing, computer graphics, programming
series	CADline
last changed	2003/06/02 10:24

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	4685
authors	Barsky, Brian A.
year	1984
title	A Description and Evaluation of Various 3-D Models
source	IEEE Computer Graphics and Applications. January, 1984. vol. 4: pp. 38-52 : ill. Includes bibliography
summary	The use of parametric curves and surfaces for object modeling in computer graphics is becoming increasingly popular. There is sometimes, however, a reluctance to use them because it seems that the added power they give is more than offset by the complexity of their formulations and their computations. The purpose of this article is to clarify their meanings and uses and show how much they have in common behind the diversity of their formulations. The author discusses the properties and benefits of using the parametric Hermite, Coons, Bezier, B-spline, and Beta-spline curve and surface formulations
keywords	Hermite, Coons, curved surfaces, Bezier, curves, B- splines, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	c9c1
authors	Basili, Victor R. and Perricone, Barry T.
year	1984
title	Software Errors and Complexity : An Empirical Investigation
source	communications of the ACM. January, 1984. vol. 27: pp. 42-52 : ill. includes bibliography
summary	The relationships between the frequency and distribution of errors during software development, the maintenance of the developed software, and a the influence of a variety of environmental factors on software development were analyzed. These factors include the complexity of the software, the developer's experience with the application, and the reuse of existing design and code. Such relationships can not only provide an insight into the characteristics of computer software development and the effects that the environment can have on the product, but also improve its reliability and quality. The study is based on data derived from a medium- scale software development project
keywords	software, engineering, programming, reliability
series	CADline
last changed	2003/06/02 13:58

_id	6050
authors	Bentley, Jon L.
year	1984
title	Algorithm Design Techniques -- Programming Pearls
source	communications of the ACM. September, 1984. vol. 27: pp. 865-871 : ill
summary	The problem arose in one-dimensional pattern recognition: The input is a vector X of N real numbers; the output is the maximum sum found in any contiguous subvector of the input. The problem is when some of the numbers are negative. This column is built around that problem with an emphasis on the algorithms that solve it and the techniques used to design them
keywords	techniques, programming, algorithms, pattern recognition
series	CADline
last changed	2003/06/02 13:58

_id	6118
authors	Bentley, Jon L.
year	1984
title	Code Tuning -- Programming Pearls
source	communications of the ACM. February, 1984. vol. 27: pp. 91-96
summary	Efficiency is one of many problems in programming, and there are many ways to achieve it. This column is about a low-level approach . 'Code tuning' locates the expensive parts of an existing program and then modifies that code to improve its performance
keywords	programming, search, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

_id	c159
authors	Bentley, Jon L.
year	1984
title	A Case Study in Applied Algorithm Design
source	IEEE Computer. February, 1984. vol. 17: pp. 75-88 : ill. tables. includes bibliography
summary	In this article the author describes how an algorithm design was used in the development of a small routine in a software system
keywords	algorithms, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	8087
authors	Boehm, Barry W., Penedo, Maria H. and Stuckle, Don E. (et al)
year	1984
title	A Software Development Environment for Improving Productivity
source	IEEE Computer. June, 1984. pp. 30-44 : ill. includes bibliography
summary	The software productivity system (SPS) was developed to support project activities. It involves a set of strategies, including the work environment; the evaluation and procurement of hardware equipment; the provision for immediate access to computing resources through local area networks; the building of an integrated set of tools to support the software development life cycle and all project personnel; and a user support function to transfer new technology. All of these strategies are being accomplished incrementally. The current architecture is VAX-based and uses the Unix operating system, a wideband local network, and a set of software tools. The article describes the steps that led to the creation of the software productivity project and its components and summarized the requirements analyses on which the SPS was based
keywords	productivity, software, hardware, programming
series	CADline
last changed	2003/06/02 10:24

_id	4e4e
authors	Boissonnat, Jean-Daniel
year	1984
title	Geometric Structures for Three- Dimensional Shape Representation
source	ACM Transactions on Graphics. October, 1984. vol. 3: pp. 266-286 : ill. includes bibliography
summary	Different geometric structures are investigated in the context of discrete surface representation. It is shown that minimal representations (i.e., polyhedra) can be provided by a surface-based method using nearest neighbors structures or by a volume-based method using the Delaunay triangulation. Both approaches are compared with respect to various criteria, such as space requirements, computation time, constraints on the distribution of the points, facilities for further calculations, and agreement with the actual shape of the object
keywords	algorithms, polyhedra, curves, curved surfaces, solids, representation, geometric modeling, data structures
series	CADline
last changed	1999/02/12 15:07

_id	088a
authors	Brotman, Shapiro Lynne and Badler, Norman I.
year	1984
title	Generating Soft Shadows With a Depth Buffer Algorithm
source	IEEE Computer Graphics and Applications. October, 1984. pp. 5-12 : ill. includes bibliography
summary	The authors take a pragmatic approach to shadowing and describe an algorithm that combines an existing shadowing method with a popular visible surface rendering technique, called a 'depth buffer,' to generate soft shadows resulting from light sources of finite extent. Their method extend Crow's shadow volume algorithm to produce multiple shadows overlapped to yield the characteristic soft edges of a shadow penumbra
keywords	rendering, algorithms, shadowing, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	architectural_intelligence2023_10
id	architectural_intelligence2023_10
authors	Cheng Bi Duan, Su Yi Shen, Ding Wen Bao & Xin Yan
year	2023
title	Innovative design solutions for contemporary Tou-Kung based on topological optimisation
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00028-x
source	Architectural Intelligence Journal
summary	Tou-Kung, which is pronounced in Chinese and known as Bracket Set (Liang & Fairbank, A pictorial history of Chinese architecture, 1984), is a vital support component in the Chinese traditional wooden tectonic systems. It is located between the column and the beam and connects the eave and pillar, making the heavy roof extend out of the eaves longer. The development of Tou-Kung is entirely a microcosm of the development of ancient Chinese architecture; the aesthetic structure and Asian artistic temperament behind Tou-Kung make it gradually become the cultural and spiritual symbol of traditional Chinese architecture. In the contemporary era, inheriting and developing Tou-Kung has become an essential issue. Several architects have attempted to employ new materials and techniques to integrate the traditional Tou-Kung into modern architectural systems, such as the China Pavilion at the 2010 World Expo and Yusuhara Wooden Bridge Museum. This paper introduces the topological optimisation method bi-directional evolutionary structural optimisation (BESO) for form-finding. BESO method is one of the most popular topology optimisation methods widely employed in civil engineering and architecture. Through analyzing the development trend of Tou-Kung and mechanical structure, the authors integrate 2D and 3D optimisation methods and apply the hybrid methods to form-finding. Meanwhile, mortise and tenon joint used to create stable connections with components of Tou-Kung are retained. This research aims to design a new Tou-Kung corresponding to “structural performance-based aesthetics”. The workflow proposed in this paper is valuable for Architrave and other traditional building components.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	f9f4
authors	Cook, R.L., Porter, Th. and Carpenter, L.
year	1984
title	Distributed Ray Tracing
source	Computer Graphics, vol. 18, no. 3, pp. 137145, July 1984. SIGGRAPH '84 Proceedings
summary	Ray tracing is one of the most elegant techniques in computer graphics. Many phenomena that are difficult or impossible with other techniques are simple with ray tracing, including shadows, reflections, and refracted light. Ray directions, however, have been determined precisely, and this has limited the capabilities of ray tracing. By distributing the directions of the rays according to the analytic function they sample, ray tracing can incorporate fuzzy phenomena. This provides correct and easy solutions to some previously unsolved or partially solved problems, including motion blur, depth of field, penumbras, translucency, and fuzzy reflections. Motion blur and depth of field calculations can be integrated with the visible surface calculations, avoiding the problems found in previous methods.
series	journal paper
last changed	2003/04/23 15:14

_id	6054
authors	Cook, R.L.
year	1984
title	Shade Trees
source	Computer Graphics, Vol. 18, No.3, pp.223-23 1
summary	Shading is an important part of computer imagery, but shaders have been based on fixed models to which all surfaces must conform. As computer imagery becomes more sophisticated, surfaces have more complex shading characteristics and thus require a less rigid shading model. This paper presents a flexible tree-structured shading model that can represent a wide range of shading characteristics. The model provides an easy means for specifying complex shading characteristics. It is also efficient because it can tailor the shading calculations to each type of surface.
series	journal paper
last changed	2003/04/23 15:14

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

For more results click below: