Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 97

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	e0a3
authors	Johnson, Robert E.
year	1984
title	Computer-Aided Energy Economics for Early Concept Design Analysis
source	Building Economics, International Symposium Proceedings (3rd : Canada). 1984? vol. 3: pp.46-57 : ill. includes bibliography
summary	Decisions that have the greatest impact on energy cost performance are made very early in the design process. The problem is that these early design decisions are rarely tested thoroughly until very late in design. Usually this is due to the difficulties inherent in the use of the more sophisticated analysis procedures. Hourly energy computer simulations are costly to use, often require detailed input preparation, and use large ''main-frame' computers. Easier to use energy evaluation tools such as manual calculations and simplified computer programs do not yield reliable results. This is particularly true when passive solar design solutions are being tested. However, even the sophisticated approaches often have a limited ability to comprehensively model the economic implications of the more accurate energy simulations. This paper is intended to describe efforts at the University of Michigan to develop a more integrated approach to the assessment of energy economics - one that may be used at the earliest stages of concept design. The approach taken has been to concentrate on developing interactive, easy to use computer programs to describe building design proposals. This computer-generated building model is then used to automatically generate the information required to run a large, sophisticated energy analysis program developed by the U.S. Army Corps of Engineers (BLAST). Total life cycle cost analysis is performed either using procedures within BLAST or an 'electronic spreadsheet' system. Perceived deficiencies in the current state of this energy/cost evaluation system are described, and future research directions are presented
keywords	architecture, energy, analysis, CAD, economics, design, methods
series	CADline
last changed	2003/06/02 10:24

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	40d6
authors	Johnson, Robert E.
year	1984
title	The Integration of Economic Analysis and Computer-based Building Models
source	CIB W-65 Symposium. July, 1984. [19] p. : ill. includes bibliography
summary	Most current methods used to evaluate the economics of building designs are inadequate in that they focus on the evaluation of completed designs and do not assist in the development and creation of designs. They are used after most major design decisions have been made. This paper describes the first year of a two year research project (funded by the National Science Foundation, the U.S. Government) which seeks to integrate economic analysis techniques into design decision-making within the context of an interactive computer-aided architectural and engineering design system. Issues reviewed include the current state of computer software, existing economic analysis models and existing economic analysis software. A conclusion is reached that most economic analysis systems fall into the category of single purpose software and are not adaptable to the wide range of idiosyncratic evaluation models used in real estate, architecture, engineering, construction and building management. Objectives are proposed for a general purpose, interactive cost modeling system that is integrated with a geometric computer-based building model. Initial experiments with a prototype of this system at various stages of the design-construction-use process are discussed. Further development of this system as a research tool for exploring alternative economic modeling procedures is presented
keywords	analysis, evaluation, CAD, architecture, design, methods, economics, integration
series	CADline
last changed	2003/06/02 13:58

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

_id	20a8
authors	Ruffle, Simon
year	1986
title	How Can CAD Provide for the Changing Role of the Architect?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 197-199
summary	At the RIBA Conference of 1981 entitled 'New Opportunities', and more recently at the 1984 ACA Annual Conference on 'Architects in Competition' there has been talk of marketing, new areas of practice, recapturing areas of practice lost to other professions, more accountability to client and public 'the decline of the mystique of the professional'. It is these issues, rather than technical advances in software and hardware, that will be the prime movers in getting computers into widespread practice in the future. In this chapter we will examine how changing attitudes in the profession might affect three practical issues in computing with which the author has been preoccupied in the past year. We will conclude by considering how, in future, early design stage computing may need to be linked to architectural theory, and, as this is a conference where we are encouraged to be outspoken, we will raise the issue of a computer-based theory of architecture.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2b48
authors	Shaviv, Edna
year	1984
title	A Design Tool for Determining the Form of Fixed and Movable Sunshades
source	ASHRAE Transactions. 1984. vol. 90: [14] p. : ill. and tables. includes bibliography: p. [7]
summary	A method for the design of fixed and movable external sunshaeds for windows is presented. The window can have any shape and be located on a wall having an arbitrary orientation. The fundamental idea is to use a computer to generate the entire envelope of the family of shading solutions that satisfies a prescribed set of shading requirements. The envelope of solutions serves as a nomogram on the basis of which sunshades are designed. Any sunshade designed following this nomogram satisfies the prescribed demands. The method creates an unlimited space of solutions, leaving the final design to the architect's imagination
keywords	evaluation, analysis, shading, design, methods, architecture, algorithms, energy
series	CADline
email
last changed	2003/05/17 10:20

_id	af76
authors	Wong, Waycal C.H. and Will, Barry F.
year	1996
title	An Analysis of Using a Digital 3D Sundial as a Design and Decision Support Tool
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 131-141
doi	https://doi.org/10.52842/conf.caadria.1996.131
summary	The rapid speed of computer development brings new technologies, and these advances require innovative investigations to apply them optimally in the field of architecture. Burkett (1984) demonstrated that computer graphics can ‘provide an excellent opportunity for exploring solar issues in building redesign’. With one of the latest computer technologies, the "hyper-model” environment, this research investigates how to environment can become an aid in the design and decision support area. The research first reviews the communication between the architect and the client as described by Salisbury (1990). The review indicates that an interactive 3D hypermedia paradigm, with quick response, fast data manipulation and 3D visualization, offers a better communication media between the architect and the client. This research applies the "hyper-model” environment to design and develop a new methodology in collecting, analyzing, and presenting solar data. It also endeavors to show the possibilities of using the environment in design process.
series	CAADRIA
last changed	2022/06/07 07:57

_id	409c
authors	Akin, Omer, Flemming, Ulrich and Woodbury, Robert F.
year	1984
title	Development of Computer Systems for Use in Architectural Education
source	1984. ii, 47 p. includes bibliography
summary	Computers have not been used in education in a way that fosters intellectual development of alternate approaches to design. Sufficient theory exists to use computing devices to support other potentially fruitful approaches to design. A proposal is made for the development of a computer system for architectural education which is built upon a particular model for design, that of rational decision making. Within the framework provided by the model, a series of courseware development projects are proposed which together with hardware acquisitions constitute a comprehensive computer system for architectural education
keywords	architecture, education, design, decision making
series	CADline
email
last changed	2003/06/02 13:58

_id	44b1
authors	Balas, Egon
year	1984
title	On the Facial Structure of Scheduling Polyhedra
source	49 p., 6 p. of appendix : ill. Pittsburgh, PA: Design Research Center, Carnegie Mellon Univ., December, 1984. includes bibliography
summary	A well-known job shop scheduling problem can be formulated as follows. Given a graph G with node set N and with directed and undirected arcs, find an orientation of the undirected arcs that minimizes the length of a longest path in G. The author treats the problem as a disjunctive program, without recourse to integer variables, and give a partial characterization of the scheduling polyhedron P(N), i.e., the convex hull of feasible schedules. In particular, he derives all the facets inducing inequalities for the scheduling polyhedron P(K) defined on some clique with node set K, and gives a sufficient condition for such inequalities to also induce facets of P(N). One of our results is that any inequality that induces a facet of P(H) for some HCK, also induces a facet of P(K). Another one is a recursive formula for deriving a facet inducing inequality with p positive coefficients from one with p-1 positive coefficients. The author also addresses the constraint identification problem, and gives a procedure for finding an inequality that cuts off a given solution to a subset of the constraints
keywords	polyhedra, graphs, optimization, convex hull
series	CADline
last changed	1999/02/12 15:07

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	36
authors	González, Carlos Guillermo
year	1998
title	Una TecnologÌa Digital Para el Diseño: El Tde-Ac (A Digital Technology for Design: The Tde-Ac)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 274-279
summary	TDE is a graphic language capable of notation of pure design operations, which offers an alternative to Monge and Perspective drawing. This language which was perfected and developed by Claudio Guerri in the late 80's, is originated in the Theory of Spatial Delimitation of CÈsar Janello (1974-1984). From 1995 onwards, and within the framework of the UBACyT AR025 Project (1995-1997), a software in order to apply the TDE through computer technology started to be developed. This work is carried out within the framework of the research program SPATIAL SEMIOTICS-DESIGN THEORY of the FADU-UBA directed by Claudio Guerri, and is continued in the UBACyT AR01 4 Project (1998-2000) "TDE-AC. Graphic language. TDE computer assisted". The computer tool TDE-AC, adds to this graphic language the power of the processing speed and a certain autonomy of interpretation and execution of design operations, which enables to visualize results with a remarkable speed in relation with manual or intellectual work in front of the drawing table. Trough the amplified projection on the screens of the program the stage of development and effectivity of TDE-AC will be demonstrated.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	4551
authors	Griffiths, J.G.
year	1984
title	A Depth-Coherence Scanline Algorithm for Displaying Curved Surfaces
source	Computer Aided Design. March, 1984. vol. 16: pp. 91-101 : ill. includes bibliography
summary	A scanline algorithm is presented which generates a realistic picture of a solid object bounded by curved surfaces. Externally, a surface is described by parametric equations. The internal representation is comprised of meshes of cubic splines which may be subdivided. Memory is saved by delaying subdivision, and by using a novel garbage collection technique. Time is saved by exploiting depth coherence. A viewpoint and scanline fix a cross-section represented as a set of curves. There are usually only a few of these to compare, and the curve nearest the viewer often remains nearest over much of its length
keywords	algorithms, curves, curved surfaces, splines, computer graphics, hidden surfaces
series	CADline
last changed	2003/06/02 13:58

_id	c1ae
authors	Gulliehsen, Eric and Chang, Ernest
year	1984
title	An Expert System for Generative Architectural Design
source	December, 1984. pp. 253-267. includes bibliography
summary	The mathematician-architect Christopher Alexander has devised a scientific theory of architectural design. He believes that all existing architectural entities can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language capable of generating design forms appropriate to a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. This paper presents a computer-based expert system which implements Alexander's design methodology
keywords	synthesis, expert systems, CAD, patterns, design, methods, architecture, theory
series	CADline
last changed	2003/06/02 10:24

For more results click below: