Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 82

Reformat results as: short short into frame detailed detailed into frame

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
doi	https://doi.org/10.52842/conf.caadria.2004.005
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ab9c
authors	Kvan, Thomas and Kvan, Erik
year	1999
title	Is Design Really Social
source	International Journal of Virtual Reality, 4:1
summary	There are many who will readily agree with Mitchell's assertion that "the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process." [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants, that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided, therefore, must permit the best communication and the best social interaction. We see a danger here, a pattern being repeated which may lead us into less than useful activities. As with several (popular) architectural design or modelling systems already available, however, computer system implementations all too often are poor imitations manual systems. For example, few in the field will argue with the statement that the storage of data in layers in a computer-aided drafting system is an dispensable approach. Layers derive from manual overlay drafting technology [Stitt 1984] which was regarded as an advanced (manual) production concept at the time many software engineers were specifying CAD software designs. Early implementations of CAD systems (such as RUCAPS, GDS, Computervision) avoided such data organisation, the software engineers recognising that object-based structures are more flexible, permitting greater control of data editing and display. Layer-based systems, however, are easier to implement in software, more familiar to the user and hence easier to explain, initially easier to use but more limiting for an experienced and thoughtful user, leading in the end to a lesser quality in resultant drawings and significant problems in output control (see Richens [1990], pp. 31-40 for a detailed analysis of such features and constraints). Here then we see the design for architectural software faithfully but inappropriately following manual methods. So too is there a danger of assuming that the best social interaction is that done face-to-face, therefore all collaborative design communications environments must mimic face-to-face.
series	journal paper
email
last changed	2003/05/15 10:29

_id	6c6f
authors	Shaviv, Edna
year	1984
title	National Situation Report: Technion (Haifa, Israel)
doi	https://doi.org/10.52842/conf.ecaade.1984.x.j7u
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	In Israel there is only one School of Architecture. CAAD teaching has been introduced since 1969-1970. Last year it has been decided that each department (electronical, mechanical, architectural) will have its own CAD laboratory for computer graphics, based on a super minicomputer (CDC Cyber 170/720). The following software is available for CAAD : CD2000 (wireframe drawings), ICEM (solid modelling), TIGS (terminal independent graphics system), GOAL and BIBLE, ACA (integrated CAAD software). At the Technion teachers and architects which can educate CAAD are available. The following courses are teached : Computer Aided Architectural Design (I + II), Computer Methods in City Planning, Mathematical Models in Architectural Design, Design Course - Geometrical Modelling, Design Course - Solar Energy Design Seminar. It was decided that since next year the following courses will use CAAD : Design course - Geometrical Modelling and Appraisal, Morphology I, 2D-Design and Design Course - Passive Solar Communities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a166
authors	Van der Heiden, G. H. and Grandjean, E.
year	1984
title	Ergonomic Studies in Computer-Aided Design Ergodesign 84 -- Ergonomics and Design in the Electronic Office:2. Field Studies, Office Furniture and Hardware
source	Behaviour and Information Technology 1984 v.3 n.4 p.341-346
summary	This paper describes the results of an ergonomic survey on interactive graphics workstations for computer-aided design (CAD). A work-sampling study was carried out to characterize the use of keyboard, digitizer tablet and video display. Subjective impressions of CAD software, CAD hardware and health aspects were collected by means of a questionnaire. Working methods and working postures were recorded on videotape. The two most important differences in comparison with other office terminals are: (i) dynamic working methods result in an absence of constrained postures in CAD operators and allow full-body exercise; (ii) CAD operators spend more time (46-68 per cent of working hours) viewing the video display than the average office terminal operator. Some ergonomic recommendations have been deduced for the construction of CAD terminals, as well as for the ergonomic improvement of existing workstations.
series	other
last changed	2002/07/07 16:01

_id	ga9928
id	ga9928
authors	Goulthorpe
year	1999
title	Hyposurface: from Autoplastic to Alloplastic Space
source	International Conference on Generative Art
summary	By way of immediate qualification to an essay which attempts to orient current technical developments in relation to a series of dECOi projects, I would suggest that the greatest liberation offered by new technology in architecture is not its formal potential as much as the patterns of creativity and practice it engenders. For increasingly in the projects presented here dECOi operates as an extended network of technical expertise: Mark Burry and his research team at Deakin University in Australia as architects and parametric/ programmatic designers; Peter Wood in New Zealand as programmer; Alex Scott in London as mathematician; Chris Glasow in London as systems engineer; and the engineers (structural/services) of David Glover’s team at Ove Arup in London. This reflects how we’re working in a new technical environment - a new form of practice, in a sense - a loose and light network which deploys highly specialist technical skill to suit a particular project. By way of a second disclaimer, I would suggest that the rapid technological development we're witnessing, which we struggle to comprehend given the sheer pace of change that overwhelms us, is somehow of a different order than previous technological revolutions. For the shift from an industrial society to a society of mass communication, which is the essential transformation taking place in the present, seems to be a subliminal and almost inexpressive technological transition - is formless, in a sense - which begs the question of how it may be expressed in form. If one holds that architecture is somehow the crystallization of cultural change in concrete form, one suspects that in the present there is no simple physical equivalent for the burst of communication technologies that colour contemporary life. But I think that one might effectively raise a series of questions apropos technology by briefly looking at 3 or 4 of our current projects, and which suggest a range of possibilities fostered by new technology. By way of a third doubt, we might qualify in advance the apparent optimism of architects for CAD technology by thinking back to Thomas More and his island ‘Utopia’, which marks in some way the advent of Modern rationalism. This was, if not quite a technological utopia, certainly a metaphysical one, More’s vision typically deductive, prognostic, causal. But which by the time of Francis Bacon’s New Atlantis is a technological utopia availing itself of all the possibilities put at humanity’s disposal by the known machines of the time. There’s a sort of implicit sanction within these two accounts which lies in their nature as reality optimized by rational DESIGN as if the very ethos of design were sponsored by Modern rationalist thought and its utopian leanings. The faintly euphoric ‘technological’ discourse of architecture at present - a sort of Neue Bauhaus - then seems curiously misplaced historically given the 20th century’s general anti-, dis-, or counter-utopian discourse. But even this seems to have finally run its course, dissolving into the electronic heterotopia of the present with its diverse opportunities of irony and distortion (as it’s been said) as a liberating potential.1 This would seem to mark the dissolution of design ethos into non-causal process(ing), which begs the question of ‘design’ itself: who 'designs' anymore? Or rather, has 'design' not become uncoupled from its rational, deterministic, tradition? The utopianism that attatches to technological discourse in the present seems blind to the counter-finality of technology's own accomplishments - that transparency has, as it were, by its own more and more perfect fulfillment, failed by its own success. For what we seem to have inherited is not the warped utopia depicted in countless visions of a singular and tyrranical technology (such as that in Orwell's 1984), but a rich and diverse heterotopia which has opened the possibility of countless channels of local dialect competing directly with the channels of power. Undoubtedly such multiplicitous and global connectivity has sent creative thought in multiple directions…
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

_id	0ecb
authors	Waerum, Jens and Rüdiger Kristiansen, Bjarne
year	1989
title	CAAD Education at the School of Architecture Copenhagen
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q8k
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.5.1-4.5.9
summary	The establishment of Datacentret (the Data Centre) in summer 1985 was preceded by 15 years slow- moving, arduous work from the early experiments in what was then the computing laboratory under the supervision of architect Per Jacobi, author of the Danish 3D drawing system MONSTER, until 1984, when a special committee was commissioned to draw up proposals for the introduction of teaching in computing at the Architects School. In spring 1985 the school administrators decided that a central computer workshop should be set up and in cooperation with the school's institutes placed jointly in charge of instructing teachers and students, carrying out research and development within the field of architecture and taking steps to work out a curriculum of supplementary training for practising architects. With the aid of a special grant, 12 PC's were successfully acquired in the 2 years that followed, as well as a screen projector and other peripherals.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddssar0031
id	ddssar0031
authors	Witt, Tom
year	2000
title	Indecision in quest of design
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Designers all start with a solution (Darke, 1984), with what is known (Rittel, 1969, 1970). Hans Menghol, Svein Gusrud and Peter Opvik did so with the chair in the 1970s. Not content with the knowledge of the chair, however, they walked backward to the ignorance of the question that has always elicited the solution of chair and asked themselves the improbable question, “What is a chair?” Their answer was the Balans chair. “Until the introduction of the Norwegian Balans (balance) chair, the multi-billion dollar international chair industry had been surprisingly homogeneous. This chair is the most radical of the twentieth century and probably since the invention of the chair-throne itself (Cranz 1998). Design theorists have tried to understand in a measurable way what is not measurable: the way that designers think. Rather than attempt to analyze something that cannot be taken apart, I attempt to illuminate methods for generating new knowledge through ways of seeing connections that are not logical, and in fact are sometimes ironic. Among the possibilities discussed in this dialogue are the methodological power of language in the form of metaphor, the power of the imagination in mind experiments, the power of mythological story telling, and the power of immeasurable intangibles in the generation of the new knowledge needed to design.
series	DDSS
last changed	2003/08/07 16:36

_id	2c1b
authors	Woolf, Beverly and McDonald, David D.
year	1984
title	Building a Computer Tutor : Design Issues
source	IEEE Computer. September, 1984. vol. 17: pp. 61-73 : diagrams. includes bibliography
summary	An effective tutor must deal with a fundamental problem of communication: to determine how messages are received and understood and to formulate appropriate answers. This means that a tutor, more than a speaker, must verify that both parties know what information has been covered, what is missing, and which communication might be erroneous. In this article the authors discuss how an understanding of a student can be constructed in an artificial intelligence program and how this understanding, coupled with a facility for language generation, can be used to build flexible machine tutor
keywords	education, communication, information, learning, AI, systems
series	CADline
last changed	2003/06/02 13:58

_id	c159
authors	Bentley, Jon L.
year	1984
title	A Case Study in Applied Algorithm Design
source	IEEE Computer. February, 1984. vol. 17: pp. 75-88 : ill. tables. includes bibliography
summary	In this article the author describes how an algorithm design was used in the development of a small routine in a software system
keywords	algorithms, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	36
authors	González, Carlos Guillermo
year	1998
title	Una TecnologÌa Digital Para el Diseño: El Tde-Ac (A Digital Technology for Design: The Tde-Ac)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 274-279
summary	TDE is a graphic language capable of notation of pure design operations, which offers an alternative to Monge and Perspective drawing. This language which was perfected and developed by Claudio Guerri in the late 80's, is originated in the Theory of Spatial Delimitation of CÈsar Janello (1974-1984). From 1995 onwards, and within the framework of the UBACyT AR025 Project (1995-1997), a software in order to apply the TDE through computer technology started to be developed. This work is carried out within the framework of the research program SPATIAL SEMIOTICS-DESIGN THEORY of the FADU-UBA directed by Claudio Guerri, and is continued in the UBACyT AR01 4 Project (1998-2000) "TDE-AC. Graphic language. TDE computer assisted". The computer tool TDE-AC, adds to this graphic language the power of the processing speed and a certain autonomy of interpretation and execution of design operations, which enables to visualize results with a remarkable speed in relation with manual or intellectual work in front of the drawing table. Trough the amplified projection on the screens of the program the stage of development and effectivity of TDE-AC will be demonstrated.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	8fd4
authors	Christiansson, Per
year	1984
title	Integrated Computer Aided Design: Present and Future Data Structure
source	CIB W78, Colloquium June, 1984. 6 p. : ill. includes bibliography.
summary	The article presents some viewpoints on data structures which may mirror the building process and development of integrated computer aided design systems. The emphasis is upon the necessity to find a sufficiently valid general approach to system development in order to meet the fast evolution within the field and the demand for development strategies
keywords	data structures, integration, CAD, systems, building process, architecture, standards, construction
series	CADline
last changed	1999/02/12 15:07

_id	e7cf
authors	Eastman, Charles M. and Preiss, K.
year	1984
title	A Review of Solid Shape Modelling Based on Integrity
source	Computer Aided Design March, 1984. vol. 16: pp. 66-80 : ill. includes bibliography.
summary	The potential benefits of using a canonical model for representing the shapes of solid objects has led to the design and implementation of a number of geometric modelers with varying capabilities. This paper reviews the approaches taken in solid modeling by defining the well-formedness conditions which must be implemented in any modeling system. The methods for satisfying the well-formedness constraints in the various solid modeling methods are reviewed, using the concept of integrity constraints. The incorporation of integrity constraints, both explicitly and implicitly, into solid modelers are considered, with particular focus on boundary modelers. The use of integrity constraints for defining shape families and assembly families are also presented. The result is a unified view of solid shape modeling systems that enables their classification and extension into particular application areas
keywords	solid modeling, constraints, B-rep
series	CADline
email
last changed	2003/05/17 10:15

_id	4551
authors	Griffiths, J.G.
year	1984
title	A Depth-Coherence Scanline Algorithm for Displaying Curved Surfaces
source	Computer Aided Design. March, 1984. vol. 16: pp. 91-101 : ill. includes bibliography
summary	A scanline algorithm is presented which generates a realistic picture of a solid object bounded by curved surfaces. Externally, a surface is described by parametric equations. The internal representation is comprised of meshes of cubic splines which may be subdivided. Memory is saved by delaying subdivision, and by using a novel garbage collection technique. Time is saved by exploiting depth coherence. A viewpoint and scanline fix a cross-section represented as a set of curves. There are usually only a few of these to compare, and the curve nearest the viewer often remains nearest over much of its length
keywords	algorithms, curves, curved surfaces, splines, computer graphics, hidden surfaces
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_15
id	avocaad_2001_15
authors	Henri Achten, Jos van Leeuwen
year	2001
title	Scheming and Plotting your Way into Architectural Complexity
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The problem of complexity underlies all design problems. With the advent of CAD however, our ability to truly represent complexity has increased considerably. Following the four waves of design methodology as distinguished by Cross (1984), we see changing architectural design attitudes with respect to complexity. Rather than viewing it as problematic issue, designers such as Koolhaas, van Berkel, Lynn, and Franke embrace complexity and make it a focus in their design work. The computer is an indispensable instrument in this approach. The paper discusses the current state of the art in architectural design positions on complexity and CAAD, and reflects in particular on the role of design representations in this discussion. It is advanced that a number of recent developments are based on an intensified use of design representations such as schema’s, diagrams, and interactive modelling techniques. Within the field of possibilities in this field, the authors discuss Feature-Based Modelling (FBM) as a formalism to represent knowledge of the design. It is demonstrated how the FBM approach can be used to describe graphic representations as used in design, and how other levels and kinds of design knowledge can be incorporated, in particular the less definite qualitative information in the early design phase. The discussion section concludes with an extrapolation of the current role of design representation in the design process, and advances a few positions on the advantage and disadvantage of this role in architectural design.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e0a3
authors	Johnson, Robert E.
year	1984
title	Computer-Aided Energy Economics for Early Concept Design Analysis
source	Building Economics, International Symposium Proceedings (3rd : Canada). 1984? vol. 3: pp.46-57 : ill. includes bibliography
summary	Decisions that have the greatest impact on energy cost performance are made very early in the design process. The problem is that these early design decisions are rarely tested thoroughly until very late in design. Usually this is due to the difficulties inherent in the use of the more sophisticated analysis procedures. Hourly energy computer simulations are costly to use, often require detailed input preparation, and use large ''main-frame' computers. Easier to use energy evaluation tools such as manual calculations and simplified computer programs do not yield reliable results. This is particularly true when passive solar design solutions are being tested. However, even the sophisticated approaches often have a limited ability to comprehensively model the economic implications of the more accurate energy simulations. This paper is intended to describe efforts at the University of Michigan to develop a more integrated approach to the assessment of energy economics - one that may be used at the earliest stages of concept design. The approach taken has been to concentrate on developing interactive, easy to use computer programs to describe building design proposals. This computer-generated building model is then used to automatically generate the information required to run a large, sophisticated energy analysis program developed by the U.S. Army Corps of Engineers (BLAST). Total life cycle cost analysis is performed either using procedures within BLAST or an 'electronic spreadsheet' system. Perceived deficiencies in the current state of this energy/cost evaluation system are described, and future research directions are presented
keywords	architecture, energy, analysis, CAD, economics, design, methods
series	CADline
last changed	2003/06/02 10:24

For more results click below: