Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 141

Reformat results as: short short into frame detailed detailed into frame

_id	02c6
authors	Wheeler, B.J.Q
year	1986
title	A Unified Model for Building
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 200-231
summary	It is commonly recognized that the time-honoured procedure for preparing an architectural design for building on site is inefficient. Each member of a team of consultant professionals makes an independently documented contribution. For a typical project involving an architect and structural, electrical, mechanical and public services engineers there will be at least five separate sets of general- arrangement drawings, each forming a model of the building, primarily illustrating one discipline but often having to include elements of others in order to make the drawing readable. For example, an air-conditioning duct-work layout is more easily understood when superimposed on the room layout it serves which the engineer is not responsible for but has to understand. Both during their parallel evolution and later, when changes have to be made during the detailed design and production drawing stages, it is difficult and time consuming to keep all versions coordinated. Complete coordination is rarely achieved in time, and conflicts between one discipline and another have to be rectified when encountered on site with resulting contractual implications. Add the interior designer, the landscape architect and other specialized consultants at one end of the list and contractors' shop drawings relating to the work of all the consultants at the other, and the number of different versions of the same thing grows, escalating the concomitant task of coordination. The potential for disputes over what is the current status of the design is enormous, first, amongst the consultants and second, between the consultants and the contractor. When amendments are made by one party, delay and confusion tend to follow during the period it takes the other parties to update their versions to include them. The idea of solving this problem by using a common computer-based model which all members of the project team can directly contribute to is surely a universally assumed goal amongst all those involved in computer-aided building production. The architect produces a root drawing or model, the 'Architect's base plan', to which the other consultants have read-only access and on top of which they can add their own write-protected files. Every time they access the model to write in the outcome of their work on the project they see the current version of the 'Architect's base plan' and can thus respond immediately to recent changes and avoid wasting time on redundant work. The architect meanwhile adds uniquely architectural material in his own overlaid files and maintains the root model as everybody's work requires. The traditional working pattern is maintained while all the participants have the ability to see their colleagues, work but only make changes to those parts for which they are responsible.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	acfe
authors	Archea, John
year	1985
title	Architecture's Unique Position Among the Disciplines : Puzzle-Making vs. Problem Solving
source	CRIT XV, The Architectural Student Journal. Summer, 1985. pp. 20-22
summary	Most disciplines involved in the building process, i.e., programmers, space planners, and engineers work in what may be described as a problem solving mode. They state desired effects as explicit performance criteria before they initiate a decision process and test alternative solutions against those criteria until a fit is attained which falls within known probabilities of success. Architects, however are not problem solvers and they are not seeking explicit information when they design how buildings work. Architects are puzzle- makers, They are primarily concerned with unique design concepts. It is through the act of designing, or puzzle- making, that the architect learn what they want to accomplish and how. With regard to the making of buildings, places or experiences, the architect is a puzzle-maker surrounded by a group of problem solvers who address separate pieces of the puzzle
keywords	puzzle making, design process, problem solving, architecture
series	CADline
last changed	1999/02/12 15:07

_id	2ae0
authors	Bairstow, Jeffrey N.
year	1985
title	Chip Design Made Easy
source	high Technology. June, 1985. pp. 18-25 : ill. includes bibliography: p. 74
summary	The combination of powerful engineering workstations and novel software tools is making custom chip design economical even for engineers without the specific training. The availability of new automated design technology is promoted by the changing market dynamics. The design of an integrated circuit, with hardware choices, is described
keywords	business, AI, electrical engineering, hardware
series	CADline
last changed	2003/06/02 13:58

_id	687b
authors	Lansdown, John
year	1986
title	Requirements for Knowledge-based Systems in Design
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 120-127
summary	Even from the comparatively small amount of work that has been done in this area it is already clear that expert systems can be of value in many architectural applications. This is particularly so in those applications involving what broadly can be called, 'classification' (such as fault diagnosis, testing for conformity with regulations and so on). What we want to look at in this chapter are some of the developments in knowledge-based systems (KBS) which will be needed in order to make them more useful in a broader application area and, especially, in creative design. At the heart of these developments will be two things: (1), more appropriate methods of representing knowledge which are as accessible to humans as they are to computers; and (2), better ways of ensuring that this knowledge can be brought to bear exactly where and when it is needed. Knowledge engineers usually call these elements, respectively, 'knowledge representation' and 'control'.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	6ed3
authors	Rasdorf, William J. and Storaasli, Olaf O.
year	1985
title	The Role of Computing in Engineering Education
source	Toward Expert Systems, Computers and Structures. Pergamon Press, July, 1985. vol. 20: pp. 11-15. Also published in: Advances and Trends in Structures and Dynamics edited by A. K. Noor and R. J. Hayduk
summary	Pergamon Press, 1985. --- Also Published in : Proceedings of the Symposium on Advances and Trends in Structures and Dynamics, Pergamon Press, George Washington University and the National Aeronautics and Space Administration, Washington, D.C. pp. 11-15, Oct.1984. The rapid advances occurring in interactive micro-computing and computer science have provided the engineer with a powerful means of processing, storing, retrieving, and displaying data. The effective use of computer technology in engineering processes and applications is recognized by many as the key to increased individual, company, and national productivity. The implications of this observation for the academic community are clear: we must prepare our students to use computer methods and applications as part of their fundamental education. The proper tradeoff between engineering fundamentals and computer science principles and practices is changing with many of the concepts of engineering now being packaged in algorithms or on computer chips. The components of an education should include operating system fundamentals, data structures, program control and organization, algorithms, and computer architectures. It is critically important for engineering students to receive an education that teaches them these fundamentals. This paper suggests that to convey the essentials of computer science to future engineers requires, in part, the addition of computer courses to the engineering curriculum. It also requires a strengthening of the computing content of many other courses so that students come to treat the computer as a fundamental component of their work. This is a major undertaking, but new engineers graduating with advanced computing knowledge will provide potentially significant future innovations in the engineering profession
keywords	CAE, education, civil engineering
series	CADline
last changed	2003/06/02 13:58

_id	a36a
authors	Rasdorf, William J.
year	1985
title	Perspectives on Knowledge in Engineering Design
source	Proceedings of the International Computers in Engineering Conference. Boston, MA: American Society of Mechanical Engineers, August, 1985. Vol. 2: pp. 249-253. CADLINE has abstract only
summary	Of all the contributions of artificial intelligence (AI), expert systems show some of the most significant promise for engineering applications. Expert systems provide a framework for acquiring, representing, and using knowledge about a particular application's domain. The role of knowledge in engineering design merits closer attention so that AI- oriented computer-aided engineering (CAE) systems can be developed and maintained systematically. Because 'knowledge' in engineering applications is loosely defined, it is necessary to identify knowledge types and the correlations between them before widespread engineering design applications can be achieved. The types of domain knowledge; facts, procedures, judgments, and control; differ from the classes of that knowledge; creative, innovative, and routine. Feasible tasks for expert systems can be determined based on these types and classes of knowledge. Interpretive tasks require reasoning about a task in light of the knowledge available, while generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select an appropriate knowledge-engineering tool for the domain being considered. The critical features to be weighed after problem classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations. After considering all of these factors in the selection of the expert system tool, the engineer can then proceed with the acquisition of knowledge and the construction and the use of the expert system
keywords	knowledge, AI, civil engineering, expert systems, CAE, representation
series	CADline
last changed	2003/06/02 13:58

_id	ce52
authors	Abram, Greg, Weslover, Lee and Whitted, Turner
year	1985
title	Efficient Alias-Free Rendering using Bit-masks and Look-up Tables
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 53-59 : ill. (some col.). includes bibliography
summary	The authors demonstrate methods of rendering alias-free synthetic images using a precomputed convolution integral. The method is based on the observation that a visible polygon fragment's contribution to an image is solely a function of its position and shape, and that within a reasonable level of accuracy, a limited number of shapes represent the majority of cases encountered in images commonly rendered. The basic technique has been applied to several different rendering algorithms. A version of the newly non-uniform sampling technique implemented in the same program but with different tables values was introduced
keywords	algorithms, computer graphics, anti-aliasing
series	CADline
last changed	2003/06/02 13:58

_id	cc15
authors	Ansaldi, Silvia, De Floriani, Leila and Falcidieno, Bianca
year	1985
title	Geometric Modeling of Solid Objects by Using a Face Adjacency Graph Representation
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 131-139 : ill. includes bibliography
summary	A relational graph structure based on a boundary representation of solid objects is described. In this structure, called Face Adjacency Graph, nodes represent object faces, whereas edges and vertices are encoded into arcs and hyperarcs. Based on the face adjacency graph, the authors define a set of primitive face-oriented Euler operators, and a set of macro operators for face manipulation, which allow a compact definition and an efficient updating of solid objects. The authors briefly describe a hierarchical graph structure based on the face adjacency graph, which provides a representation of an object at different levels of detail. Thus it is consistent with the stepwise refinement process through which the object description is produced
keywords	geometric modeling, graphs, objects, representation, data structures,B-rep, solid modeling, Euler operators
series	CADline
last changed	2003/06/02 10:24

_id	8ae8
authors	Ayala, D., P. Brunet and Juan (et al)
year	1985
title	Object Representation by Means of Nominimal Division Quadtrees and Octrees
source	ACM Transactions on Graphics. January, 1985. vol. 4: pp. 41-59 : ill. includes bibliography
summary	Quadtree representation of two-dimensional objects is performed with a tree that describes the recursive subdivision of the more complex parts of a picture until the desired resolution is reached. At the end, all the leaves of the tree are square cells that lie completely inside or outside the object. There are two great disadvantages in the use of quadtrees as a representation scheme for objects in geometric modeling system: The amount of memory required for polygonal objects is too great, and it is difficult to recompute the boundary representation of the object after some Boolean operations have been performed. In the present paper a new class of quadtrees, in which nodes may contain zero or one edge, is introduced. By using these quadtrees, storage requirements are reduced and it is possible to obtain the exact backward conversion to boundary representation. Algorithms for the generation of the quadtree, boolean operation, and recomputation of the boundary representation are presented, and their complexities in time and space are discussed. Three- dimensional algorithms working on octrees are also presented. Their use in the geometric modeling of three-dimensional polyhedral objects is discussed
keywords	geometric modeling, algorithms, octree, quadtree, curves, curved surfaces, boolean operations
series	CADline
last changed	2003/06/02 13:58

_id	2730
authors	Balkovich, Edward, Lerman, Steven and Parmelee, Richard P.
year	1985
title	Computing in Higher Education : The ATHENA Experience
source	communications of the ACM. November, 1985. vol. 28: pp. 1214- 1224
summary	In this article the use of computation in higher education is approached from the broad sense of its actual use in the curriculum. The authors try to identify areas where current educational methods have observable deficiencies that might be alleviated by the use of appropriate software/hardware combinations. Project ATHENA at MIT is the example the article is based on
keywords	networks, software, hardware, UNIX, education
series	CADline
last changed	2003/06/02 13:58

_id	c89d
authors	Bancroft, Pamela J.
year	1987
title	The Integration of Computing into Architectural Education Through Computer Literate Faculty
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 109-120
doi	https://doi.org/10.52842/conf.acadia.1987.109
summary	This paper discusses the apparent correlation between faculty computer literacy and the success of integrating computing into architectural education. Relevant questions of a 1985 national survey which was conducted to study the historical development of faculty computer utilization are analyzed and interpreted. The survey results are then used as the basis for a series of recommendations given for increasing computer literacy among faculty in architectural schools, thus increasing the integration of computing.
series	ACADIA
last changed	2022/06/07 07:54

_id	2928
authors	Barsky, Brian A. and De Rose, Tony D.
year	1985
title	The Beta2-spline : A Special Case of the Beta-spline Curve and Surface Representation
source	IEEE Computer Graphics and Applications September, 1985. vol. 5: pp. 46-58 : ill. includes bibliography.
summary	This article develops a special case of the Beta-spline curve and surface technique called the Beta2-spline. While a general Beta-spline has two parameters (B1 and B2) controlling its shape, the special case presented here has only the single parameter B2. Experience has shown this to be a simple but very useful special case that is computationally more efficient than the general case. Optimized algorithms for the evaluation of the Beta2-spline basis functions and rendering of Beta2-spline curves and surfaces via subdivision are presented. This technique is proving to be quite useful in the modeling of complex shapes. The representation is sufficiently general and flexible so as to be capable of modeling irregular curved-surface objects such as automobile bodies, aircraft fuselages, ship hulls, turbine blades, and bottles
keywords	B-splines, curved surfaces, computational geometry, representation, algorithms, computer graphics, rendering
series	CADline
last changed	2003/06/02 14:41

_id	c50a
authors	Bartschi, Martin
year	1985
title	An Overview of Information Retrieval Subjects
source	IEEE Computer. May, 1985. vol. 18: pp. 67-84 : ill. includes bibliography
summary	The aim of an information retrieval system is to find information items relevant to an information need. As relevance is a kind of similarity relation between the concepts represented by the information item and those represented by the formulation of the information need, it is not astonishing to discover that the class of possible query forms -formulations of the information needs - is the same as the class of possible representations of information items. This article overviews current research problems in information structure and query evaluation
keywords	database, information, queries, systems
series	CADline
last changed	1999/02/12 15:07

_id	2d64
authors	Batori, D.S. and Kim, W.
year	1985
title	Modeling Concepts for VLSI CAD Objects
source	ACM Transactions on Database Systems 10 No. 3 - pp. 322-346
summary	VLSI CAD applications deal with design objects that have an interface description and an implementation description. Versions of design objects have a common interface but differ in their implementations. A molecular object is a modeling construct which enables a database entity to be represented by two sets of heterogeneous records, one set describes the object's interface and the other describes its implementation. Thus a reasonable starting point for modeling design objects is to begin with the concept of molecular objects. In this paper, we identify modeling concepts that are fundamental to capturing the semantics of VLSI CAD design objects and versions in terms of molecular objects. A provisional set of user operations on design objects, consistent with these modeling concepts, is also defined. The modeling framework that we present has been found useful for investigating physical storage techniques and change notification problems in version control. REFERENCES
series	journal paper
last changed	2003/11/21 15:16

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9408
id	ddss9408
authors	Bax, Thijs and Trum, Henk
year	1994
title	A Taxonomy of Architecture: Core of a Theory of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The authors developed a taxonomy of concepts in architectural design. It was accepted by the Advisory Committee for education in the field of architecture, a committee advising the European Commission and Member States, as a reference for their task to harmonize architectural education in Europe. The taxonomy is based on Domain theory, a theory developed by the authors, based on General Systems Theory and the notion of structure according to French Structuralism, takes a participatory viewpoint for the integration of knowledge and interests by parties in the architectural design process. The paper discusses recent developments of the taxonomy, firstly as a result of a confrontation with similar endeavours to structure the field of architectural design, secondly as a result of applications of education and architectural design practice, and thirdly as a result of theapplication of some views derived from the philosophical work from Charles Benjamin Peirce. Developments concern the structural form of the taxonomy comprising basic concepts and levelbound scale concepts, and the specification of the content of the fields which these concepts represent. The confrontation with similar endeavours concerns mainly the work of an ARCUK workingparty, chaired by Tom Marcus, based on the European Directive from 1985. The application concerns experiences with a taxonomy-based enquiry in order to represent the profile of educational programmes of schools and faculties of architecture in Europe in qualitative and quantitative terms. This enquiry was carried out in order to achieve a basis for comparison and judgement, and a basis for future guidelines including quantitative aspects. Views of Peirce, more specifically his views on triarchy as a way of ordering and structuring processes of thinking,provide keys for a re-definition of concepts as building stones of the taxonomy in terms of the form-function-process-triad, which strengthens the coherence of the taxonomy, allowing for a more regular representation in the form of a hierarchical ordered matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9409
id	ddss9409
authors	Beekman, Solange and Rikhof, Herman G.A.
year	1994
title	Strategic Urban Planning in the Netherlands
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Since the mid-1980s, several Dutch towns have initiated many urban planning and design activities for their existing area. This represented a shift in that previous urban planning projects typicallyconcerned expansion in the outskirts of the city, or urban renewal. The complex and expensive renovation of the existing housing stock rarely allowed a deep interest in urban design. Since 1985, attention shifted from the housing stock to the city as a whole. Furthermore, public andprivate actors increasingly become involved in the planning process. It became clear that a more comprehensive plan for the whole existing town or region was needed. Conventional planning instruments were considered ill-suited for this new challenge. The paper discusses promising attempts of various urban planning instruments to get a stronger but also more flexible hold on thetransformation of the urban planning area in the Netherlands. These new planning instruments have three common characteristics: (i) they give special attention to the different levels of urban management needed for different urban areas, (ii) these strategic plans provide an integral view on the urban developments, and (iii) these plans introduce a new strategy to deal with both private initiatives to transform urban sites and monitor wishes, proposals, etc. from inhabitants in the neighbourhoods. A comparative analyses of several cities indicates, however, that, in addition to these common characteristics, major differences between their strategic plans exist depending upon their historic patrimonium, economic status and planning tradition.
series	DDSS
email
last changed	2003/08/07 16:36

_id	a619
authors	Bentley, Jon L. and McGeoch, Catherine C.
year	1985
title	Amortized Analyses of Self-Organizing Sequential Search ; Heuristics Programming Techniques and Data Structures
source	communications of the ACM April, 1985. vol. 28: pp. 404-411 : ill. includes bibliography.
summary	Amortization is used to analyze the heuristics in a worst- case sense. The relative merit of the heuristics in this analysis is different in the probabilistic analyses. Experiments show that the behavior of the heuristics on real data is more closely described by the amortized analyses than by the probabilistic analyses
keywords	economics, analysis, search, heuristics
series	CADline
last changed	2003/06/02 13:58

_id	8323
authors	Bentley, Jon L.
year	1985
title	Selection -- Programming Pearls
source	communications of the ACM. November, 1985. vol. 28: pp. 1121- 1127 : ill
summary	This column describes selecting the K- smallest member in a set of N elements. A program for the task is derived and its running time is analyzed
keywords	search, programming, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

For more results click below: