Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 142

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	29ff
authors	Farouki, Rida T. and Hinds, John K.
year	1985
title	A Hierarchy of Geometric Forms
source	IEEE Computer Graphics and Applications. May, 1985. vol. 5: pp. 51-78 : ill. includes bibliography
summary	This article describes a unified approach to geometric modeling based on the mathematics of parametric polynomial functions. Such a unified scheme for geometric representation and computation provides a natural base for a geometric modeler of considerable versatility and robustness
keywords	geometric modeling, parametrization, representation, curves, curved surfaces, B-splines
series	CADline
last changed	2003/06/02 13:58

_id	236f
authors	Mortenson, Michael E.
year	1985
title	Geometric Modeling
source	xvi, 763 p. : ill New York: John Wiley & sons, 1985. includes bibliography: p. 713-729 and index.
summary	Presents the nature, development and application of the basic concepts of geometric modeling. It consists of three parts: parametric geometry, solid modeling, and applications, all with exercises
keywords	computational geometry, geometric modeling, parametrization, solid modeling, CAD, CAM, systems, applications
series	CADline
last changed	2003/06/02 13:58

_id	2699
authors	Piegl, L.
year	1985
title	Recursive Algorithms for the Representation of Parametric Curves and Surfaces
source	Computer Aided Design Butterworth & Co. (publishers) Ltd., June, 1985. vol. 17: pp. 225-230 : ill.
summary	includes a short bibliography. Recursive algorithms for the representation of parametric curves and surfaces are presented which are based upon a geometric property of the de Casteljau algorithm. The algorithms work with triangular and pyramidal arrays that provide an easy handing of the curve and the surface 'in a large' design
keywords	representation, recursion, algorithms, parametrization, curves, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	a127
authors	Rasdorf, William J. and Salley, George C.
year	1985
title	Generative Engineering Databases - Toward Expert Systems
source	Computers and Structures. Pergamon Press, 1985. vol. 22: pp. 11-15
summary	CADLINE has abstract only. Engineering data management, incorporating concepts of optimization with data representation, is receiving increasing attention. Research in this area promises advantages for many engineering applications, particularly those which use data innovatively. This paper presents a framework for a comprehensive, relational database management system that combines a knowledge base (KB) of design constraints with a database (DB) of engineering data items to achieve a 'generative database' - one which automatically generates new engineering design data according to the design constraints stored in the knowledge base. Thus, in addition to the designer and engineering design and analysis application programs, the database itself contributes to the design process. The KB/DB framework proposed here requires a database that is able to store all of the data normally associated with engineering design and to accurately represent the interactions between constraints and the stored data while guaranteeing its integrity. The framework also requires a knowledge base that is able to store all the constraints imposed upon the engineering design process. The goal sought is a central integrated repository of data, supporting interfaces to a wide variety of application programs and supporting processing capabilities for maintaining integrity while generating new data. The resulting system permits the unaided generation of constrained data values, thereby serving as an active design assistant. This paper suggests this new conceptual framework as a means of improving engineering data representation, generation, use, and management
keywords	management, optimization, synthesis, database, expert systems, civil engineering
series	CADline
last changed	2003/06/02 10:24

_id	acadia06_068
id	acadia06_068
authors	Elys, John
year	2006
title	Digital Ornament
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 68-78
doi	https://doi.org/10.52842/conf.acadia.2006.068
summary	Gaming software has a history of fostering development of economical and creative methods to deal with hardware limitations. Traditionally the visual representation of gaming software has been a poor offspring of high-end visualization. In a twist of irony, this paper proposes that game production software leads the way into a new era of physical digital ornament. The toolbox of the rendering engine evolved rapidly between 1974-1985 and it is still today, 20 years later the main component of all visualization programs. The development of the bump map is of particular interest; its evolution into a physical displacement map provides untold opportunities of the appropriation of the 2D image to a physical 3D object.To expose the creative potential of the displacement map, a wide scope of existing displacement usage has been identified: Top2maya is a scientific appropriation, Caruso St John Architects an architectural precedent and Tord Boonje’s use of 2D digital pattern provides us with an artistic production precedent. Current gaming technologies give us an indication of how the resolution of displacement is set to enter an unprecedented level of geometric detail. As modernity was inspired by the machine age, we should be led by current technological advancement and appropriate its usage. It is about a move away from the simplification of structure and form to one that deals with the real possibilities of expanding the dialogue of surface topology. Digital Ornament is a kinetic process rather than static, its intentions lie in returning the choice of bespoke materials back to the Architect, Designer and Artist.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2d64
authors	Batori, D.S. and Kim, W.
year	1985
title	Modeling Concepts for VLSI CAD Objects
source	ACM Transactions on Database Systems 10 No. 3 - pp. 322-346
summary	VLSI CAD applications deal with design objects that have an interface description and an implementation description. Versions of design objects have a common interface but differ in their implementations. A molecular object is a modeling construct which enables a database entity to be represented by two sets of heterogeneous records, one set describes the object's interface and the other describes its implementation. Thus a reasonable starting point for modeling design objects is to begin with the concept of molecular objects. In this paper, we identify modeling concepts that are fundamental to capturing the semantics of VLSI CAD design objects and versions in terms of molecular objects. A provisional set of user operations on design objects, consistent with these modeling concepts, is also defined. The modeling framework that we present has been found useful for investigating physical storage techniques and change notification problems in version control. REFERENCES
series	journal paper
last changed	2003/11/21 15:16

_id	a217
authors	Bhatt, Rajesh V., Fisher, Edward L. and Rasdorf, William J.
year	1985
title	Information Retrieval Architectures For Expert System/DBMS Communication
source	Industrial Engineering Fall Conference Proceedings. December, 1985. pp. 315-320. CADLINE has abstract only
summary	The development of expert systems (ES) for manufacturing problems indicates a need to interact with potentially large amounts of data, much of which resides elsewhere in the ES user's organization. A large amount of information required for planning, design, and control operations can be made available through an existing database management system (DBMS). The need for an ES to access that data is critical. This paper presents two approaches to the development of ES- DBMS interfaces, both query-language based. One approach uses a procedural attachment to the ES language to obtain the required data via the DBMS query language, while the other one uses a separate interface program between the ES and the query language of the DBMS. The procedural attachment is able to acquire data from a DBMS at a faster rate than the interface program; however, the procedural attachment lacks knowledge of the DBMS schema. On the other hand, the interface program sacrifices speed but promotes flexibility, as it has the capability of selecting which DBMS to extract the required data from and allowing augmentation of schema knowledge outside of the ES. A disadvantage of the interface approach is the amount of time involved in data retrieval. The process of writing information to disk files is I/O intensive. This can be quite slow, particularly in PROLOG, the language used to implement the ES. Thus the use of such an interface is only suitable in applications such as design, where extremely fast I/O is not required
keywords	design, engineering, expert systems, information, database, DBMS
series	CADline
last changed	2003/06/02 10:24

_id	e4bc
authors	Cass, Christopher
year	1985
title	Creativity and Automation: Thoughtful Training Guarantees Room for Both
source	computer Graphics World. November, 1985. vol. 8: pp. 33-34, 36 : col. ill
summary	To avoid losing and ignoring the conceptual and functional importance of traditional design and modeling skills, firms should control the use of new technology in such a way that traditional organizational benefits are retained. Problems and suggestions were presented for the training programs given to those who already possess design skills in order to enhance creativity
keywords	creativity, training, automation, practice
series	CADline
last changed	1999/02/12 15:07

_id	4e29
authors	Gero, John S. and Coyne, Richard D.
year	1985
title	Logic Programming As a Means of Representing Semantics in Design Languages
source	Environment and Planning B. 1985. vol. 12: pp. 351-369 : ill. includes bibliography
summary	Logic programming is discussed as a method for representing aspects of design language: Descriptions of designs domain knowledge, transformation rules, design grammar and control mechanisms necessary to implement rules. The applicability of logic programming to the representation of semantics in design is also explored. Control at the semantic level provides a means of directing the automated generation of designs. Examples are drawn from a rule-based design system written in the logic programming language PROLOG
keywords	PROLOG, logic, programming, design, shape grammars, semantics, languages, representation
series	CADline
email
last changed	2003/05/17 10:17

_id	687b
authors	Lansdown, John
year	1986
title	Requirements for Knowledge-based Systems in Design
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 120-127
summary	Even from the comparatively small amount of work that has been done in this area it is already clear that expert systems can be of value in many architectural applications. This is particularly so in those applications involving what broadly can be called, 'classification' (such as fault diagnosis, testing for conformity with regulations and so on). What we want to look at in this chapter are some of the developments in knowledge-based systems (KBS) which will be needed in order to make them more useful in a broader application area and, especially, in creative design. At the heart of these developments will be two things: (1), more appropriate methods of representing knowledge which are as accessible to humans as they are to computers; and (2), better ways of ensuring that this knowledge can be brought to bear exactly where and when it is needed. Knowledge engineers usually call these elements, respectively, 'knowledge representation' and 'control'.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	6ed3
authors	Rasdorf, William J. and Storaasli, Olaf O.
year	1985
title	The Role of Computing in Engineering Education
source	Toward Expert Systems, Computers and Structures. Pergamon Press, July, 1985. vol. 20: pp. 11-15. Also published in: Advances and Trends in Structures and Dynamics edited by A. K. Noor and R. J. Hayduk
summary	Pergamon Press, 1985. --- Also Published in : Proceedings of the Symposium on Advances and Trends in Structures and Dynamics, Pergamon Press, George Washington University and the National Aeronautics and Space Administration, Washington, D.C. pp. 11-15, Oct.1984. The rapid advances occurring in interactive micro-computing and computer science have provided the engineer with a powerful means of processing, storing, retrieving, and displaying data. The effective use of computer technology in engineering processes and applications is recognized by many as the key to increased individual, company, and national productivity. The implications of this observation for the academic community are clear: we must prepare our students to use computer methods and applications as part of their fundamental education. The proper tradeoff between engineering fundamentals and computer science principles and practices is changing with many of the concepts of engineering now being packaged in algorithms or on computer chips. The components of an education should include operating system fundamentals, data structures, program control and organization, algorithms, and computer architectures. It is critically important for engineering students to receive an education that teaches them these fundamentals. This paper suggests that to convey the essentials of computer science to future engineers requires, in part, the addition of computer courses to the engineering curriculum. It also requires a strengthening of the computing content of many other courses so that students come to treat the computer as a fundamental component of their work. This is a major undertaking, but new engineers graduating with advanced computing knowledge will provide potentially significant future innovations in the engineering profession
keywords	CAE, education, civil engineering
series	CADline
last changed	2003/06/02 13:58

_id	a36a
authors	Rasdorf, William J.
year	1985
title	Perspectives on Knowledge in Engineering Design
source	Proceedings of the International Computers in Engineering Conference. Boston, MA: American Society of Mechanical Engineers, August, 1985. Vol. 2: pp. 249-253. CADLINE has abstract only
summary	Of all the contributions of artificial intelligence (AI), expert systems show some of the most significant promise for engineering applications. Expert systems provide a framework for acquiring, representing, and using knowledge about a particular application's domain. The role of knowledge in engineering design merits closer attention so that AI- oriented computer-aided engineering (CAE) systems can be developed and maintained systematically. Because 'knowledge' in engineering applications is loosely defined, it is necessary to identify knowledge types and the correlations between them before widespread engineering design applications can be achieved. The types of domain knowledge; facts, procedures, judgments, and control; differ from the classes of that knowledge; creative, innovative, and routine. Feasible tasks for expert systems can be determined based on these types and classes of knowledge. Interpretive tasks require reasoning about a task in light of the knowledge available, while generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select an appropriate knowledge-engineering tool for the domain being considered. The critical features to be weighed after problem classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations. After considering all of these factors in the selection of the expert system tool, the engineer can then proceed with the acquisition of knowledge and the construction and the use of the expert system
keywords	knowledge, AI, civil engineering, expert systems, CAE, representation
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ce52
authors	Abram, Greg, Weslover, Lee and Whitted, Turner
year	1985
title	Efficient Alias-Free Rendering using Bit-masks and Look-up Tables
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 53-59 : ill. (some col.). includes bibliography
summary	The authors demonstrate methods of rendering alias-free synthetic images using a precomputed convolution integral. The method is based on the observation that a visible polygon fragment's contribution to an image is solely a function of its position and shape, and that within a reasonable level of accuracy, a limited number of shapes represent the majority of cases encountered in images commonly rendered. The basic technique has been applied to several different rendering algorithms. A version of the newly non-uniform sampling technique implemented in the same program but with different tables values was introduced
keywords	algorithms, computer graphics, anti-aliasing
series	CADline
last changed	2003/06/02 13:58

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	cc15
authors	Ansaldi, Silvia, De Floriani, Leila and Falcidieno, Bianca
year	1985
title	Geometric Modeling of Solid Objects by Using a Face Adjacency Graph Representation
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 131-139 : ill. includes bibliography
summary	A relational graph structure based on a boundary representation of solid objects is described. In this structure, called Face Adjacency Graph, nodes represent object faces, whereas edges and vertices are encoded into arcs and hyperarcs. Based on the face adjacency graph, the authors define a set of primitive face-oriented Euler operators, and a set of macro operators for face manipulation, which allow a compact definition and an efficient updating of solid objects. The authors briefly describe a hierarchical graph structure based on the face adjacency graph, which provides a representation of an object at different levels of detail. Thus it is consistent with the stepwise refinement process through which the object description is produced
keywords	geometric modeling, graphs, objects, representation, data structures,B-rep, solid modeling, Euler operators
series	CADline
last changed	2003/06/02 10:24

_id	acfe
authors	Archea, John
year	1985
title	Architecture's Unique Position Among the Disciplines : Puzzle-Making vs. Problem Solving
source	CRIT XV, The Architectural Student Journal. Summer, 1985. pp. 20-22
summary	Most disciplines involved in the building process, i.e., programmers, space planners, and engineers work in what may be described as a problem solving mode. They state desired effects as explicit performance criteria before they initiate a decision process and test alternative solutions against those criteria until a fit is attained which falls within known probabilities of success. Architects, however are not problem solvers and they are not seeking explicit information when they design how buildings work. Architects are puzzle- makers, They are primarily concerned with unique design concepts. It is through the act of designing, or puzzle- making, that the architect learn what they want to accomplish and how. With regard to the making of buildings, places or experiences, the architect is a puzzle-maker surrounded by a group of problem solvers who address separate pieces of the puzzle
keywords	puzzle making, design process, problem solving, architecture
series	CADline
last changed	1999/02/12 15:07

_id	8ae8
authors	Ayala, D., P. Brunet and Juan (et al)
year	1985
title	Object Representation by Means of Nominimal Division Quadtrees and Octrees
source	ACM Transactions on Graphics. January, 1985. vol. 4: pp. 41-59 : ill. includes bibliography
summary	Quadtree representation of two-dimensional objects is performed with a tree that describes the recursive subdivision of the more complex parts of a picture until the desired resolution is reached. At the end, all the leaves of the tree are square cells that lie completely inside or outside the object. There are two great disadvantages in the use of quadtrees as a representation scheme for objects in geometric modeling system: The amount of memory required for polygonal objects is too great, and it is difficult to recompute the boundary representation of the object after some Boolean operations have been performed. In the present paper a new class of quadtrees, in which nodes may contain zero or one edge, is introduced. By using these quadtrees, storage requirements are reduced and it is possible to obtain the exact backward conversion to boundary representation. Algorithms for the generation of the quadtree, boolean operation, and recomputation of the boundary representation are presented, and their complexities in time and space are discussed. Three- dimensional algorithms working on octrees are also presented. Their use in the geometric modeling of three-dimensional polyhedral objects is discussed
keywords	geometric modeling, algorithms, octree, quadtree, curves, curved surfaces, boolean operations
series	CADline
last changed	2003/06/02 13:58

_id	2ae0
authors	Bairstow, Jeffrey N.
year	1985
title	Chip Design Made Easy
source	high Technology. June, 1985. pp. 18-25 : ill. includes bibliography: p. 74
summary	The combination of powerful engineering workstations and novel software tools is making custom chip design economical even for engineers without the specific training. The availability of new automated design technology is promoted by the changing market dynamics. The design of an integrated circuit, with hardware choices, is described
keywords	business, AI, electrical engineering, hardware
series	CADline
last changed	2003/06/02 13:58

For more results click below: