Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 145

Reformat results as: short short into frame detailed detailed into frame

_id	8d75
authors	Preparata, Franco P. and Shamos, Michael Ian
year	1985
title	Computational Geometry : An Introduction
source	xi, 390 p. : ill. NeW York: Springer-Verlag Pub. Co., 1985. includes bibliography: p. [366]- 376 and index. -- (text and monographs in Computer Science)
summary	A fundamental task of computational geometry is identifying concepts, properties and techniques which help efficient algorithmic implementations for geometric problems. The approach taken here is the presentations of algorithms and the evaluation of their worst case complexity. The particular problems addressed include geometric searching and retrieval, convex hull construction and related problems, proximity, intersection and the geometry of rectangles
keywords	geometry, algorithms, computational geometry, convex hull, analysis
series	CADline
last changed	2003/06/02 10:24

_id	ca88
authors	Buzbee, B.L. and Sharp, D.H.
year	1985
title	Perspectives on Supercomputing
source	Science. February, 1985. vol. 227: pp. 591-597 : ill. includes bibliography
summary	This article provides a brief look at the current status of supercomputers and supercomputing in the United States. It addresses a variety of applications of supercomputers and the characteristics of a large modern supercomputing facility, the radical changes in the design of supercomputers that are impending, and the conditions that are necessary for a conducive climate for the further development and application of supercomputers
keywords	parallel processing, hardware, business
series	CADline
last changed	2003/06/02 13:58

_id	ascaad2006_paper20
id	ascaad2006_paper20
authors	Chougui, Ali
year	2006
title	The Digital Design Process: reflections on architectural design positions on complexity and CAAD
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	These instructions are intended to guide contributors to the Second Architecture is presently engaged in an impatient search for solutions to critical questions about the nature and the identity of the discipline, and digital technology is a key agent for prevailing innovations in architectural design. The problem of complexity underlies all design problems. With the advent of CAD however, Architect’s ability to truly represent complexity has increased considerably. Another source that provides information about dealing with complexity is architectural theory. As Rowe (1987) states, architectural theory constitutes “a corpus of principles that are agreed upon and therefore worthy of emulation”. Architectural theory often is a mixed reflection on the nature of architectural design, design processes, made in descriptive and prescriptive terms (see Kruft 1985). Complexity is obviously not a new issue in architectural theory. Since it is an inherent characteristic of design problems, it has been dealt with in many different ways throughout history. Contemporary architects incorporate the computer in their design process. They produce architecture that is generated by the use of particle systems, simulation software, animation software, but also the more standard modelling tools. The architects reflect on the impact of the computer in their theories, and display changes in style by using information modelling techniques that have become versatile enough to encompass the complexity of information in the architectural design process. In this way, architectural style and theory can provide directions to further develop CAD. Most notable is the acceptance of complexity as a given fact, not as a phenomenon to oppose in systems of organization, but as a structuring principle to begin with. No matter what information modelling paradigm is used, complex and huge amounts of information need to be processed by designers. A key aspect in the combination of CAD, complexity, and architectural design is the role of the design representation. The way the design is presented and perceived during the design process is instrumental to understanding the design task. More architects are trying to reformulate this working of the representation. The intention of this paper is to present and discuss the current state of the art in architectural design positions on complexity and CAAD, and to reflect in particular on the role of digital design representations in this discussion. We also try to investigate how complexity can be dealt with, by looking at architects, in particular their styles and theories. The way architects use digital media and graphic representations can be informative how units of information can be formed and used in the design process. A case study is a concrete architect’s design processes such as Peter Eisenman Rem Koolhaas, van Berkel, Lynn, and Franke gehry, who embrace complexity and make it a focus point in their design, Rather than viewing it as problematic issue, by using computer as an indispensable instrument in their approaches.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	6947
authors	Foxley, Eric, McGettrick, A. D. and van Leeuwen, J. (consulting editors)
year	1985
title	UNIX for Super Users
source	xiv, 213 p. Wokingham, England: Addison-Wesley Pub. Co., 1985. includes index -- (International Computer Science Series)
summary	For the person responsible for managing a UNIX system. A description of key management functions like : Bringing up the system and taking it down, creation of new login names, maintenance of file-store security, monitoring user resource usage, and machine performance considerations. Outlines of shell scripts and C programs for various system management function are given. All major versions, at the time, of UNIX and its derivatives are covered
keywords	UNIX, operating systems
series	CADline
last changed	2003/06/02 13:58

_id	6735
authors	Gardner, Howard
year	1985
title	The Mind's New Science: A History of the Cognitive Revolution
source	xv, 423 p. New York: Basic Books, 1985. includes bibliography: p.393-408 and indexes
summary	An interdisciplinary effort of cognitive science through conceptual tools to solve the problem of the nature of knowledge and how it is represented in the mind
keywords	AI, cognition, research, science, psychology
series	CADline
last changed	1999/02/12 15:08

_id	6916
authors	Gasparski, W.
year	1986
title	Design Methodology: How I Understand and Develop it
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 16-27
summary	The term 'methodology' is sometimes given two diametrically opposed meanings, well characterized by Mark Blaug in the preface of a very informative book devoted to the methodology of economics. This is also the case with the methodology of design. One can find studies in which 'the methodology of design' is simply a method or methods of design, given a fancy name to make it or them appear more scientific. Authors of such studies should not confuse their readers by taking methodological studies to mean technicalities of design or demanding that their interpretation and assessment of so-called 'practical applicability' should follow this criterion. The methodology of design - as we understand it has parallels in the methodology of Blaug's economics, the philosophy of practical science, the applied sciences or the sciences of artificial objects or artefacts. Understood this way, the methodology of design is neither the method of practising design nor an instruction for its use but a theoretical reflection - in the meaning given to methodology by the philosophy of science - of design. In this connection a study of the methodology of design should be provided with the subtitle, 'How researchers of practical sciences and designers understand the concept of changes'.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	68aa
authors	Greenberg, Donald P.
year	1986
title	Computer Graphics and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 63-67
summary	The field of computer graphics has made enormous progress during the past decade. It is rapidly approaching the time when we will be able to create images of such realism that it will be possible to 'walk through' nonexistent spaces and to evaluate their aesthetic quality based on the simulations. In this chapter we wish to document the historical development of computer graphics image creation and describe some techniques which are currently being developed. We will try to explain some pilot projects that we are just beginning to undertake at the Program of Computer Graphics and the Center for Theory and Simulation in Science and Engineering at Cornell University.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	6c66
authors	Perlin, Ken
year	1985
title	An Image Synthesizer
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 287- 296 : ill. includes bibliography
summary	The authors introduce the concept of a Pixel Stream Editor. This forms the basis for an interactive synthesizer for designing highly realistic Computer Generated Imagery. The designer works in an interactive Very High Level programming environment which provides a very fast concept/implement/view iteration cycle. Naturalistic visual complexity is built up by composition of non-linear functions, as opposed to the more conventional texture mapping or growth model algorithms. Powerful primitives are included for creating controlled stochastic effects. The concept of 'solid texture' to the field of CGI is introduced. The authors have used this system to create very convincing representations of clouds, fire, water, stars, marble, wood, rock, soap films and crystals. The algorithms created with this paradigm are generally extremely fast, highly realistic, and asynchronously parallelizable at the pixel level
keywords	computer graphics, programming, algorithms, synthesis, realism
series	CADline
last changed	1999/02/12 15:09

_id	6ed3
authors	Rasdorf, William J. and Storaasli, Olaf O.
year	1985
title	The Role of Computing in Engineering Education
source	Toward Expert Systems, Computers and Structures. Pergamon Press, July, 1985. vol. 20: pp. 11-15. Also published in: Advances and Trends in Structures and Dynamics edited by A. K. Noor and R. J. Hayduk
summary	Pergamon Press, 1985. --- Also Published in : Proceedings of the Symposium on Advances and Trends in Structures and Dynamics, Pergamon Press, George Washington University and the National Aeronautics and Space Administration, Washington, D.C. pp. 11-15, Oct.1984. The rapid advances occurring in interactive micro-computing and computer science have provided the engineer with a powerful means of processing, storing, retrieving, and displaying data. The effective use of computer technology in engineering processes and applications is recognized by many as the key to increased individual, company, and national productivity. The implications of this observation for the academic community are clear: we must prepare our students to use computer methods and applications as part of their fundamental education. The proper tradeoff between engineering fundamentals and computer science principles and practices is changing with many of the concepts of engineering now being packaged in algorithms or on computer chips. The components of an education should include operating system fundamentals, data structures, program control and organization, algorithms, and computer architectures. It is critically important for engineering students to receive an education that teaches them these fundamentals. This paper suggests that to convey the essentials of computer science to future engineers requires, in part, the addition of computer courses to the engineering curriculum. It also requires a strengthening of the computing content of many other courses so that students come to treat the computer as a fundamental component of their work. This is a major undertaking, but new engineers graduating with advanced computing knowledge will provide potentially significant future innovations in the engineering profession
keywords	CAE, education, civil engineering
series	CADline
last changed	2003/06/02 13:58

_id	448d
authors	Schmitt, Gerhard N.
year	1985
title	Architectural Expert Systems: Definition, Application Areas and Practical Examples
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 43-51
doi	https://doi.org/10.52842/conf.acadia.1985.043
summary	Knowledge Based Expert Systems (KBES) have emerged as a new tool for decision making in scientific disciplines. From the definition of the term and from previous experiences in geology, computer science, engineering, and medicine, it seems that they could develop into an important tool for architectural design and the building industry. This paper gives a very general overview over existing expert systems and potential application areas in architecture. It then presents in more detail two of the prototype systems that are under development in the Department of Architecture at Carnegie - Mellon University to gain practical experience.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ac45
authors	Shafer, Steven A.
year	1985
title	Shadows and Silhouettes in Computer Vision
source	xv, 198 p. : ill. Hingham, MA: Kluwer Academic Publishers, 1985. includes bibliography: p. [163]-167 and index. -- (The Kluwer International Series in Engineering and Computer Science, Robotics and Vision)
summary	Explains how to use shadows to determine surface orientations of solid objects, and how to analyze silhouettes and contours of solids of revolution of gradient space and generalized cylinders
keywords	solids, visualization, image processing, shadowing, vision, AI, robotics
series	CADline
last changed	2003/06/02 13:58

_id	020d
authors	Shaviv, Edna
year	1986
title	Layout Design Problems: Systematic Approaches
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 28-52
summary	The complexity of the layout design problems known as the 'spatial allocation problems' gave rise to several approaches, which can be generally classified into two main streams. The first attempts to use the computer to generate solutions of the building layout, while in the second, computers are used only to evaluate manually generated solutions. In both classes the generation or evaluation of the layout are performed systematically. Computer algorithms for 'spatial allocation problems' first appeared more than twenty-five years ago (Koopmans, 1957). From 1957 to 1970 over thirty different programs were developed for generating the floor plan layout automatically, as is summarized in CAP-Computer Architecture Program, Vol. 2 (Stewart et al., 1970). It seems that any architect who entered the area of CAAD felt that it was his responsibility to find a solution to this prime architectural problem. Most of the programs were developed for batch processing, and were run on a mainframe without any sophisticated input/output devices. It is interesting to mention that, because of the lack of these sophisticated input/output devices, early researchers used the approach of automatic generation of optimal or quasioptimal layout solution under given constraints. Gradually, we find a recession and slowdown in the development of computer programs for generation of layout solutions. With the improvement of interactive input/output devices and user interfaces, the inclination today is to develop integrated systems in which the architectural solution is obtained manually by the architect and is introduced to the computer for the appraisal of the designer's layout solution (Maver, 1977). The manmachine integrative systems could work well, but it seems that in most of the integrated systems today, and in the commercial ones in particular, there is no route to any appraisal technique of the layout problem. Without any evaluation techniques in commercial integrated systems it seems that the geometrical database exists Just to create working drawings and sometimes also perspectives.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8f9d
authors	Wolchko, Matthew J.
year	1985
title	Strategies Toward Architectural Knowledge Engineering
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 69-82
doi	https://doi.org/10.52842/conf.acadia.1985.069
summary	Conventional CAD-drafting systems become more powerful modeling tools with the addition of a linked attribute spreadsheet module. This affords the designer the ability to make design decisions not only in the graphic environment, but also as a consequence of quantitative design constraints made apparent in the spreadsheet. While the spreadsheet interface is easily understood by the user, it suffers from two limitations: it lacks a variety of functional capabilities that would enable it to solve more complex design tasks; also, it can only report on existing conditions in the graphic environment. A proposal is made for the enhancement of the spreadsheet's programming power, creating an interface for the selection of program modules that can solve various architectural design tasks. Due to the complexity and graphic nature of architectural design, it is suggested that both procedural and propositional programming methods be used in concert within such a system. In the following, a suitable design task (artificial illumination-reflected ceiling layout) is selected, and then decomposed into two parts: the quantitative analysis (via the application of a procedural programming algorithm), and a logical model generation using shape grammar rules in a propositional framework.
series	ACADIA
last changed	2022/06/07 07:57

_id	ce52
authors	Abram, Greg, Weslover, Lee and Whitted, Turner
year	1985
title	Efficient Alias-Free Rendering using Bit-masks and Look-up Tables
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 53-59 : ill. (some col.). includes bibliography
summary	The authors demonstrate methods of rendering alias-free synthetic images using a precomputed convolution integral. The method is based on the observation that a visible polygon fragment's contribution to an image is solely a function of its position and shape, and that within a reasonable level of accuracy, a limited number of shapes represent the majority of cases encountered in images commonly rendered. The basic technique has been applied to several different rendering algorithms. A version of the newly non-uniform sampling technique implemented in the same program but with different tables values was introduced
keywords	algorithms, computer graphics, anti-aliasing
series	CADline
last changed	2003/06/02 13:58

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	cc15
authors	Ansaldi, Silvia, De Floriani, Leila and Falcidieno, Bianca
year	1985
title	Geometric Modeling of Solid Objects by Using a Face Adjacency Graph Representation
source	SIGGRAPH '85 Conference Proceedings. July, 1985. vol. 19 ; no. 3: pp. 131-139 : ill. includes bibliography
summary	A relational graph structure based on a boundary representation of solid objects is described. In this structure, called Face Adjacency Graph, nodes represent object faces, whereas edges and vertices are encoded into arcs and hyperarcs. Based on the face adjacency graph, the authors define a set of primitive face-oriented Euler operators, and a set of macro operators for face manipulation, which allow a compact definition and an efficient updating of solid objects. The authors briefly describe a hierarchical graph structure based on the face adjacency graph, which provides a representation of an object at different levels of detail. Thus it is consistent with the stepwise refinement process through which the object description is produced
keywords	geometric modeling, graphs, objects, representation, data structures,B-rep, solid modeling, Euler operators
series	CADline
last changed	2003/06/02 10:24

_id	acfe
authors	Archea, John
year	1985
title	Architecture's Unique Position Among the Disciplines : Puzzle-Making vs. Problem Solving
source	CRIT XV, The Architectural Student Journal. Summer, 1985. pp. 20-22
summary	Most disciplines involved in the building process, i.e., programmers, space planners, and engineers work in what may be described as a problem solving mode. They state desired effects as explicit performance criteria before they initiate a decision process and test alternative solutions against those criteria until a fit is attained which falls within known probabilities of success. Architects, however are not problem solvers and they are not seeking explicit information when they design how buildings work. Architects are puzzle- makers, They are primarily concerned with unique design concepts. It is through the act of designing, or puzzle- making, that the architect learn what they want to accomplish and how. With regard to the making of buildings, places or experiences, the architect is a puzzle-maker surrounded by a group of problem solvers who address separate pieces of the puzzle
keywords	puzzle making, design process, problem solving, architecture
series	CADline
last changed	1999/02/12 15:07

_id	8ae8
authors	Ayala, D., P. Brunet and Juan (et al)
year	1985
title	Object Representation by Means of Nominimal Division Quadtrees and Octrees
source	ACM Transactions on Graphics. January, 1985. vol. 4: pp. 41-59 : ill. includes bibliography
summary	Quadtree representation of two-dimensional objects is performed with a tree that describes the recursive subdivision of the more complex parts of a picture until the desired resolution is reached. At the end, all the leaves of the tree are square cells that lie completely inside or outside the object. There are two great disadvantages in the use of quadtrees as a representation scheme for objects in geometric modeling system: The amount of memory required for polygonal objects is too great, and it is difficult to recompute the boundary representation of the object after some Boolean operations have been performed. In the present paper a new class of quadtrees, in which nodes may contain zero or one edge, is introduced. By using these quadtrees, storage requirements are reduced and it is possible to obtain the exact backward conversion to boundary representation. Algorithms for the generation of the quadtree, boolean operation, and recomputation of the boundary representation are presented, and their complexities in time and space are discussed. Three- dimensional algorithms working on octrees are also presented. Their use in the geometric modeling of three-dimensional polyhedral objects is discussed
keywords	geometric modeling, algorithms, octree, quadtree, curves, curved surfaces, boolean operations
series	CADline
last changed	2003/06/02 13:58

_id	2ae0
authors	Bairstow, Jeffrey N.
year	1985
title	Chip Design Made Easy
source	high Technology. June, 1985. pp. 18-25 : ill. includes bibliography: p. 74
summary	The combination of powerful engineering workstations and novel software tools is making custom chip design economical even for engineers without the specific training. The availability of new automated design technology is promoted by the changing market dynamics. The design of an integrated circuit, with hardware choices, is described
keywords	business, AI, electrical engineering, hardware
series	CADline
last changed	2003/06/02 13:58

For more results click below: