Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 146

Reformat results as: short short into frame detailed detailed into frame

_id	0711
authors	Kunnath, S.K., Reinhorn, A.M. and Abel, J.F.
year	1990
title	A Computational Tool for Evaluation of Seismic Performance of RC Buildings
source	February, 1990. [1] 15 p. : ill. graphs, tables. includes bibliography: p. 10-11
summary	Recent events have demonstrated the damaging power of earthquakes on structural assemblages resulting in immense loss of life and property (Mexico City, 1985; Armenia, 1988; San Francisco, 1989). While the present state-of-the-art in inelastic seismic response analysis of structures is capable of estimating response quantities in terms of deformations, stresses, etc., it has not established a physical qualification of these end-results into measures of damage sustained by the structure wherein system vulnerability is ascertained in terms of serviceability, repairability, and/or collapse. An enhanced computational tool is presented in this paper for evaluation of reinforced concrete structures (such as buildings and bridges) subjected to seismic loading. The program performs a series of tasks to enable a complete evaluation of the structural system: (a) elastic collapse- mode analysis to determine the base shear capacity of the system; (b) step-by-step time history analysis using a macromodel approach in which the inelastic behavior of RC structural components is incorporated; (c) reduction of the response quantities to damage indices so that a physical interpretation of the response is possible. The program is built around two graphical interfaces: one for preprocessing of structural and loading data; and the other for visualization of structural damage following the seismic analysis. This program can serve as an invaluable tool in estimating the seismic performance of existing RC buildings and for designing new structures within acceptable levels of damage
keywords	seismic, structures, applications, evaluation, civil engineering, CAD
series	CADline
last changed	2003/06/02 14:41

_id	8298
authors	Quadrel, Richard W. and Chassin, David P.
year	1985
title	Energy Graphics: A Progress Report on the Development of Architectural Courseware
doi	https://doi.org/10.52842/conf.acadia.1985.129
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 129-141
summary	Energy Graphics is a technique for determining the energy performance of buildings at the conceptual stage of the architectural design process. Unlike many energy analysis programs, which only produce results after ail of the building information has been supplied, Energy Graphics works with the designer in understanding how early decisions about building form and configuration affect energy use. The Energy Graphics technique is currently being "computerized" on a Sun 2/120 graphics workstation, under a grant by the Inter-University Consortium for Educational Computing. The resulting software will be used in the architectural design curriculum so that students will be able to receive an immediate energy evaluation of their design explorations. For use in the studios, the software must include a powerful graphics interface that allows students to "sketch" their design concepts interactively. The computer will then interpret these sketches as building information, organize them into an integrated database, perform the energy calculations, and inform the student of the results in a graphic format. One of the project's major goals is to provide this graphics interface in the same way that architects think about drawing, and not simply to imitate current computer "drafting" systems. The goals of the project can only be met by developing the software on a powerful workstation system, which provides fast processing time, large memory, multitasking capabilities and high-resolution graphics. This progress report describes our efforts to date on the development of this important software.
series	ACADIA
last changed	2022/06/07 08:00

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	a619
authors	Bentley, Jon L. and McGeoch, Catherine C.
year	1985
title	Amortized Analyses of Self-Organizing Sequential Search ; Heuristics Programming Techniques and Data Structures
source	communications of the ACM April, 1985. vol. 28: pp. 404-411 : ill. includes bibliography.
summary	Amortization is used to analyze the heuristics in a worst- case sense. The relative merit of the heuristics in this analysis is different in the probabilistic analyses. Experiments show that the behavior of the heuristics on real data is more closely described by the amortized analyses than by the probabilistic analyses
keywords	economics, analysis, search, heuristics
series	CADline
last changed	2003/06/02 13:58

_id	c3b1
authors	Berry, R. E. and Meekings, B.A.E.
year	1985
title	A Style Analysis of C Programs
source	communications of the ACM. January, 1985. vol. 29: pp. 80-88
summary	Since programming is considered by many to be learned by experience and example, rather than instruction, the authors analyzed code produced by professional programmers. C programs comprising the UNIX operating system and its utilities were chosen. The authors have arbitrarily selected a large body of professionally produced code and subjected it to 'stylish analysis.' Each program was given a percentage 'score' for style that consists of contributions in varying degrees from various program features like module length, line length, reserved words etc
keywords	languages, C, programming, techniques
series	CADline
last changed	2003/06/02 13:58

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	fe6c
authors	Clark, R.H. and Pause, M.
year	1985
title	Precedents in architecture
source	Van Nostrand Reinhold, New York
summary	Precedents in Architecture provides a vocabulary for architectural analysis that will help you understand the works of others, and aid you in creating your own designs. Here, you will examine the work of internationally known architects with the help of a unique diagrammatic technique, which you can also use to analyze existing buildings. In addition to the sixteen original contributors, the Second Edition features seven new, distinguished architects. All 23 architects were selected because of the strength, quality, and interest of their designs. Precedents in Architecture, 2/e is an invaluable resource offering: * Factual graphic information on 88 buildings that represent a range of time, function, and style accompanied by detailed analysis of each building * A reference for a technique of graphic analysis as a tool for understanding and designing architecture Whether you are a novice or a seasoned professional, Precedents in Architecture, 2/e will enrich your design vocabulary and give you an invaluable tool for the ongoing assessment of buildings you encounter every day.
series	other
last changed	2003/04/23 15:14

_id	0533
authors	Clemons, Eric K. and Greenfield, Arnold J.
year	1985
title	The SAGE System Architecture: A System for the Rapid Development of Graphics Interfaces for Decision Support
source	IEEE Computer Graphics and Applications. November, 1985. vol. 5: pp. 38-50 : ill. includes bibliography
summary	Graphics interfaces support the decision maker in sensitivity analysis - the exploration of proposed solutions and examination of alternatives. The authors present an architecture for rapid preparation of graphics interfaces for large classes of management sciences, operations research, and expert systems models. This architecture is based on a detailed study of sensitivity analysis requests is also presented. The architecture was the basis of a prototype, now operational, which is illustrated through a case study of sensitivity analysis in a vehicle-routing system
keywords	expert systems, user interface, operations research
series	CADline
last changed	2003/06/02 10:24

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ed59
authors	Hart, Anna
year	1985
title	Knowledge Elicitation : Issues and Methods
source	Computer Aided Design. November, 1985. vol. 17: pp. 455-462 : ill. includes bibliography
summary	The paper, after briefly outlining the stages in the development of an expert system, describes and reviews methods for knowledge elicitation. These methods include: interview techniques; protocol analysis; induction; and the repertory grid technique
keywords	knowledge acquisition, expert systems, protocol analysis, psychology
series	CADline
last changed	1999/02/12 15:08

_id	6db4
authors	Karakatsanis, Andreas Georgiou
year	1985
title	Floder: A Floor Designer Expert System
source	Department of Civil Engineering, Carnegie Mellon University, Pittsburgh PA
summary	The use of computers in structural design for the last two decades has been limited to algorithmic and procedural tasks. The use of expert system environments facilitates the implementation of conceptual tasks in computer programs. The goal of this study is to develop an expert system for the structural design of floor framings. FLODER, the resulting expert system, generates, analyzes, and evaluates floor framings for a given architectural plan. Framing generation consists of determination of the locations of structural elements in the architectural plan. Analysis involves an approximation of the dimensions of the slabs. Evaluation numerically ranks all generated framings using heuristic features for the alternatives. FLODER is implemented in OPS5 and LISP. The primary representations used are OPS5 production rules for the knowledge-base, and OPS5 working memory elements, for the context. Tasks amenable to algorithmic approaches are implemented in LISP. FLODER, even in its present state, can be viewed as a useful assistant to a designer. It can rapidly generate and evaluate alternative framings for a given architectural plan and thus increase the work productivity of its users [includes bibliography].
keywords	Knowledge Base, Systems, Design, Architecture, Civil Engineering, Representation, Expert Systems, Floor Plans, Synthesis, Structures
series	CADline
last changed	1999/02/15 15:27

_id	e1a8
authors	Kellogg, Richard E.
year	1985
title	CAD-Spreadsheet Linkages for Design and Analysis
doi	https://doi.org/10.52842/conf.acadia.1985.109
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 109-118
summary	This paper reports on two systems under development which link a CAD system with a spreadsheet. The first extracts areas and R-values from a special AutoCAD drawing and processes the information in a Lotus 1-2-3 spreadsheet to obtain total heatloss for a building. The second is a prototype expert system which uses space labels from an AutoCAD "bubble-diagram" to print lists of design recommendations extracted from a Lotus 1-2-3 data-base. These methods emphasize drawing as the primary design activity, while providing immediate factual feedback about the design proposal.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	0397
authors	Nadler, Edmond
year	1985
title	Piecewise Linear Approximation on Triangulations of a Planar Region
source	Reports in Pattern Analysis. [2], V, 76 p. :ill. May, 1985. No. 140. includes bibliography
summary	For any triangulation of a given polygonal region, consider the piecewise linear least squares approximation of a given smooth function u. The problem is to characterize triangulations for which the global error of approximation is minimized for the number of triangles. The analogous problem in one dimension has been thoroughly analyzed, but in higher dimensions one has also to consider the shapes of the subregions, and not only their relative size. After establishing the existence of such an optimal triangulation, the local problem of best triangle shape is considered. Using an expression for the error of approximation involving the matrix H of second derivatives, the best shaped triangle is seen to be an equilateral transformed by a matrix related to H. This triangle is long in the direction of minimum curvature and narrow in the direction of maximum curvature, as one would expect. For the global problem, a series of two lower bounds on the approximation error are obtained, which suggest an asymptotic error estimate for optimal triangulation. The error estimate is shown to hold, and the conditions for attaining the lower bounds characterize the sizes and shapes of the triangles in the optimal triangulation. The shapes are seen to approach the optimal shapes described in the local analysis, and the errors on the triangles are seen to be asymptotically balanced
keywords	triangulation, landscape, topology, computational geometry, computer graphics
series	CADline
last changed	1999/02/12 15:09

_id	ee4b
id	ee4b
authors	Ozel, Filiz
year	1985
title	Using CAD in Fire Safety Research
doi	https://doi.org/10.52842/conf.acadia.1985.142
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 142-154
summary	While architecture offices are increasingly using CADD systems for drafting purposes, architectural schools are pursuing projects that use the CAD data base for new applications in the analysis and evaluation of buildings. This paper summarizes two studies done at the University of Michigan, Architecture Research laboratory, where the CAD system was used to develop a fire safety code evaluation program, and an emergency egress behavior simulation. The former one takes the National Fire Protection Association (NFPA) Life safety Code 101 as a basis, and generates the code compliance requirements of a given project. The ether study accepts people as information processing beings and simulates their way finding behavior under emergency conditions. Both of these studies utilize the graphic characteristics of the CAD system, producing color displays on the CRT screen, and also outputting information in tabular form which refers to the display on the screen. Both of them also have plotting options.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	8d75
authors	Preparata, Franco P. and Shamos, Michael Ian
year	1985
title	Computational Geometry : An Introduction
source	xi, 390 p. : ill. NeW York: Springer-Verlag Pub. Co., 1985. includes bibliography: p. [366]- 376 and index. -- (text and monographs in Computer Science)
summary	A fundamental task of computational geometry is identifying concepts, properties and techniques which help efficient algorithmic implementations for geometric problems. The approach taken here is the presentations of algorithms and the evaluation of their worst case complexity. The particular problems addressed include geometric searching and retrieval, convex hull construction and related problems, proximity, intersection and the geometry of rectangles
keywords	geometry, algorithms, computational geometry, convex hull, analysis
series	CADline
last changed	2003/06/02 10:24

_id	a127
authors	Rasdorf, William J. and Salley, George C.
year	1985
title	Generative Engineering Databases - Toward Expert Systems
source	Computers and Structures. Pergamon Press, 1985. vol. 22: pp. 11-15
summary	CADLINE has abstract only. Engineering data management, incorporating concepts of optimization with data representation, is receiving increasing attention. Research in this area promises advantages for many engineering applications, particularly those which use data innovatively. This paper presents a framework for a comprehensive, relational database management system that combines a knowledge base (KB) of design constraints with a database (DB) of engineering data items to achieve a 'generative database' - one which automatically generates new engineering design data according to the design constraints stored in the knowledge base. Thus, in addition to the designer and engineering design and analysis application programs, the database itself contributes to the design process. The KB/DB framework proposed here requires a database that is able to store all of the data normally associated with engineering design and to accurately represent the interactions between constraints and the stored data while guaranteeing its integrity. The framework also requires a knowledge base that is able to store all the constraints imposed upon the engineering design process. The goal sought is a central integrated repository of data, supporting interfaces to a wide variety of application programs and supporting processing capabilities for maintaining integrity while generating new data. The resulting system permits the unaided generation of constrained data values, thereby serving as an active design assistant. This paper suggests this new conceptual framework as a means of improving engineering data representation, generation, use, and management
keywords	management, optimization, synthesis, database, expert systems, civil engineering
series	CADline
last changed	2003/06/02 10:24

_id	a0d4
id	a0d4
authors	Rosa Enrich, Andrea Carnicero, Gustavo Fornari & Pedro Orazzi
year	2004
title	ANALYSIS AND EVALUATION OF MATHEMATICAL LEARNING STRUCTURES
source	Proceedings of the Fourth International Conference of Mathematics & Design, Spetial Edition of the Journal of Mathematics & Design, Volume 4, No.1, pp. 13-21.
summary	Abstract: A series of practical tasks have been done under the general name of “Surfaces in invisible cities”. Each task was based on a story taken from the book The Invisible Cities by Italo Calvino. The research carried out allows to design a pedagogical project which makes evident , generates and connects several intentions, motivations and learning structures. It proposes the use of multi- level languages and readings. Therefore, each task takes more time than that of the proposed mathematical class. Its implementation generates a broader view than that seen at the time of design. From the detailed analysis of the results obtained, the following diverse pedagogical aspects of this work project arise: a. The use of several multiple intelligence: Howard Gardner (1985) found that a man has several distinct intelligence types among which Logical-Mathematical; Spatial; Linguistic -oriented; Musical; Intra-personal; Kinesthetic-Corporal; Interpersonal stand out. Only those types used in the task will be analyzed, making a brief description of each type. b. The architectonic-city planning aspects: architectonic-city planning interpretation of the space imagined after reading the text, with the purpose of identifying figures, shapes, volumes and colors which are expressed via an analogous space. They consist of visual, architectonic and territorial speculations without a rigorous spatial theory and it is pretended that they possess a technical precision at mathematical concept level. c. The mathematical contents: a study of the conical and square shapes present in the designs done and used in a creative manner in students’ compositions following the reading of the story chosen is carried out. An analysis of shapes is performed and mathematical problems are posed within the design context. Traditional sketching methods have been used in task solving and the possibilities offered by the virtual tools are analyzed. Emphasis has been put on the vertical and horizontal interchanges in the Chair, generating changes in knowledge transmission perspectives, thus allowing the sharing of contents, abilities and resources. The architectonic work imagined and created by the students will focus on these different working lines creating a harmonious and significant whole. The work is the result of multiple connections and creative proposals.
keywords	city, geometry, multiple intelligence
series	other
type	normal paper
email
last changed	2005/04/07 12:46

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8f9d
authors	Wolchko, Matthew J.
year	1985
title	Strategies Toward Architectural Knowledge Engineering
doi	https://doi.org/10.52842/conf.acadia.1985.069
source	ACADIA Workshop ‘85 [ACADIA Conference Proceedings] Tempe (Arizona / USA) 2-3 November 1985, pp. 69-82
summary	Conventional CAD-drafting systems become more powerful modeling tools with the addition of a linked attribute spreadsheet module. This affords the designer the ability to make design decisions not only in the graphic environment, but also as a consequence of quantitative design constraints made apparent in the spreadsheet. While the spreadsheet interface is easily understood by the user, it suffers from two limitations: it lacks a variety of functional capabilities that would enable it to solve more complex design tasks; also, it can only report on existing conditions in the graphic environment. A proposal is made for the enhancement of the spreadsheet's programming power, creating an interface for the selection of program modules that can solve various architectural design tasks. Due to the complexity and graphic nature of architectural design, it is suggested that both procedural and propositional programming methods be used in concert within such a system. In the following, a suitable design task (artificial illumination-reflected ceiling layout) is selected, and then decomposed into two parts: the quantitative analysis (via the application of a procedural programming algorithm), and a logical model generation using shape grammar rules in a propositional framework.
series	ACADIA
last changed	2022/06/07 07:57

_id	806f
authors	Woo, Tony C.
year	1985
title	A Combinatorial Analysis of Boundary Data Structure Schemata
source	IEEE Computer Graphics and Applications. March, 1985. vol. 5: pp. 19-27 : ill. includes bibliography
summary	While the design of an efficient 3-D data structure may be of theoretical interest, its real reward is the software speed- up in geometric algorithm for solid modeling, CAD/CAM and robotics application by using boundary data structures that are fast and use less storage. It is the objective of this article to provide techniques for designing new boundary data structures
keywords	CAD, CAM, data structures, solid modeling, algorithms, B-rep,techniques
series	CADline
last changed	2003/06/02 10:24

For more results click below: