Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 200

Reformat results as: short short into frame detailed detailed into frame

_id	a91c
authors	Meyer, G., Rushmeier, H., Cohen, M., Greenberg, D. and Torrace, K.
year	1986
title	An Experimental Evaluation of Computer Graphics Imagery
source	ACM Transactions on Graphics, 5, No. 1
summary	Accurate simulation of light propagation within an environment and perceptually based imaging techniques are necessary for the creation of realistic images. A physical experiment that verifies the simulation of reflected light intensities for diffuse environments was conducted. Measurements of radiant energy flux densities are compared with predictions using the radiosity method for those physical environments. By using color science procedures the results of the light model simulation are then transformed to produce a color television image. The final image compares favorably with the original physical model. The experiment indicates that, when the physical model and the simulation were viewed through a view camera, subjects could not distinguish between them. The results and comparison of both test procedures are presented within this paper.
series	journal paper
last changed	2003/04/23 15:50

_id	a9b1
authors	Cohen, M.F., Greenberg, D.P. and Immel, D.S. (et al)
year	1986
title	An Efficient Radiosity Approach for Realistic Image Synthesis
source	IEEE Computer Graphics and Applications March, 1986. vol. 6: pp. 26-35 : col. ill. includes bibliography.
summary	The radiosity method models the interaction of light between diffusely reflecting surfaces and accurately predicts the global illumination effects. Procedures are now available to simulate complex environments including occluded and textured surfaces. For accurate rendering, the environment must be discretized into a fine mesh, particularly in areas of high intensity gradients. The interdependence between surfaces implies solution techniques which are computationally intractable. This article describes new procedures to predict the global illumination function without excessive computational expense. Statistics indicate the enormous potential of this approach for realistic image synthesis, particularly for dynamic images of static environments
keywords	computer graphics, radiosity, rendering, algorithms
series	CADline
last changed	2003/06/02 14:42

_id	e43b
authors	Blasi, D. and Scudo, G.
year	1986
title	Experience of Output Visualisation in Thermal Performance Analysis and Design.
doi	https://doi.org/10.52842/conf.ecaade.1986.186
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 186-191
summary	GKS didactic application in output visualisation of thermal behaviour simulation in building analysis and design. Energy analysis is performed by BEETA (Built Environment Energy Test and Analysis) code. It is a numerical simulation code which allows to simulate the building multizone thermal behaviour with different passive devices (Direct Gain, Greenhouse, Solar Chimney, Trompe, Convective and Radiative Cooling etc.). The code is based on thermal network theory and methods; the set of thermal equation is normally solved every hour or less by the coefficient matrix inversion method. An interactive loop is provide for dealing with non- linear thermal conductance problems with continuous or step variation (i.e. air mixing through an opening between two spaces, Trompe wall convective loop, etc.) The code allows to take into account urban obstructions and shading devices.
series	eCAADe
last changed	2022/06/07 07:52

_id	ed51
authors	Bergeron, Philippe
year	1986
title	A General Version of Crow's Shadow Volumes
source	IEEE Computer Graphics and Applications September, 1986. vol. 6: pp. 17-28 : col. ill. includes bibliography.
summary	In 1977 Frank Crow introduced a new class of algorithms for the generation of shadows. His technique, based on the concept of shadow volumes, assumes a polygonal database and a constrained environment. For example, polyhedrons must be closed, and polygons must be planar. This article presents a new version of Crow's algorithm, developed at the Universite de Montreal, which attempts a less constrained environment. The method has allowed the handling of both open and closed models and nonplanar polygons with the viewpoint anywhere, including any shadow volume. It does not, however, sacrifice the essential features of Crow's original version: penetration between polygons is allowed, and any number of light sources can be defined anywhere in 3D space, including the view volume and any shadow volume. The method has been used successfully in the film Tony de Peltrie and is easily incorporated into an existing scan-line, hidden-surface algorithm
keywords	algorithms, shadowing, polygons, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	4361
authors	Bishop, G. and Weimer, D.M.
year	1986
title	Fast Phong Shading
source	Computer Graphics (20) 4 pp. 103-106
summary	Computer image generation systems often represent curved surfaces as a mesh of polygons that are shaded to restore a smooth appearance. Phong shading is a well known algorithm for producing a realistic shading but it has not been used by real-time systems because of the 3 additions, 1 division and 1 square root required per pixel for its evaluation. We describe a new formulation for Phong shading that reduces the amount of computation per pixel to only 2 additions for simple Lambertian reflection and 5 additions and 1 memory reference for Phong's complete reflection model. We also show how to extend our method to compute the specular component with the eye at a finite distance from the scene rather than at infinity as is usually assumed. The method can be implemented in hardware for real-time applications or in software to speed image generation for almost any system.
series	journal paper
last changed	2003/11/21 15:16

_id	c5af
authors	Bobrow, Daniel G. and Stefik, Mark J.
year	1986
title	Perspective on Artificial Intelligence Programming
source	Science. February, 1986. vol. 231: pp. 951-956
summary	Programming systems for artificial intelligence application use specialized languages, environments, and knowledge-based tools to reduce the complexity of the programming task. Language style based on procedure, objects logic rules, and constraints reflect different models for organizing programs and facilitate program evaluation and understandability. To make programming easier, multiple styles can be integrated as sublanguages in programming environment. Programming environments provide tools that analyze programs and create informative displays of their structure. Programs can be modified by direct interaction with these displays. These tools and languages are helping computer scientists to regain a sense of control over systems that have become increasingly complex
keywords	programming, AI
series	CADline
last changed	2003/06/02 13:58

_id	4431
authors	Calderaro, V. and Platone, C.
year	1986
title	Information systems and internvention technologies programmed to aid the energy saving within the limits of the existing building property rescue
doi	https://doi.org/10.52842/conf.ecaade.1986.192
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 192-201
summary	In our national territory the rescue of the existing building property is a very important problem. For that reason, starting front the presupposition that the existing buildings, restoration finds its real achievement by means of technological and installing interventions strictly connected with the energy costs and consumptions, this study sets as a planning method on various degrees to analyze, single out and propose the possible solutions based on qualitative and quantitative researches into the thermo-physical behaviour of the above-mentioned buildings. From a research done into the principal building properties related with the different national areas we can single out significant morphological samples and typical technological structures. This first analytical study allows the singling out of significant building models on which it's possible to value the thermal behaviour and possible subsequent restoring interventions by applying computerized mathematical models or by operating diagrams deduced from them. First of all, these mathematical models for simulation allow a valuation of the main thermal parameters (dispersion both in absolute value and in volumetric factor, medium thermal transmittance (U value) of geometrical models deduced from the typical above - mentioned cases.
series	eCAADe
last changed	2022/06/07 07:54

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	6916
authors	Gasparski, W.
year	1986
title	Design Methodology: How I Understand and Develop it
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 16-27
summary	The term 'methodology' is sometimes given two diametrically opposed meanings, well characterized by Mark Blaug in the preface of a very informative book devoted to the methodology of economics. This is also the case with the methodology of design. One can find studies in which 'the methodology of design' is simply a method or methods of design, given a fancy name to make it or them appear more scientific. Authors of such studies should not confuse their readers by taking methodological studies to mean technicalities of design or demanding that their interpretation and assessment of so-called 'practical applicability' should follow this criterion. The methodology of design - as we understand it has parallels in the methodology of Blaug's economics, the philosophy of practical science, the applied sciences or the sciences of artificial objects or artefacts. Understood this way, the methodology of design is neither the method of practising design nor an instruction for its use but a theoretical reflection - in the meaning given to methodology by the philosophy of science - of design. In this connection a study of the methodology of design should be provided with the subtitle, 'How researchers of practical sciences and designers understand the concept of changes'.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	c52d
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Guildford: Butterworth, 1986. pp. 107-119
summary	This paper introduces the concepts of knowledge engineering, a subset of artificial intelligence. It describes means of representing and manipulating non-numeric design knowledge using symbolic inference mechanisms. It then describes a subset of knowledge engineering--expert systems. Knowledge- based systems in computer-aided architectural design are presented as a new direction for CAAD which expands the role of the computer in design. Expert systems within a CAAD environment are discussed
keywords	AI, knowledge base, design, architecture, CAD, representation, expert systems
series	CADline
email
last changed	2003/06/02 13:58

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	ad96
authors	Gudes, Ehud and Bracha, Gilad
year	1986
title	GCI : A Tool for Developing Interactive CAD User Interfaces
source	26 p. : ill. Israel: 1986? includes bibliography
summary	GCI is a Unix based tool for developing interactive CAD programs. By separating command/menu definitions from the program, GCI makes it easier to change and extend the user interface. The language provided by GCI is used to define syntax of commands, menus, messages, and help text. Generally, GCI supports a static hierarchical structure of commands and menus. However, through a program interface, an application program has the freedom to change environments, commands and menus. This flexibility of run-time control of the user interface is essential for developing highly responsive interfaces in a CAD environment. This paper presents the main concepts and definition language of GCI. It then discusses architectural and implementation issues, and finally presents a typical application's view of using the tool
keywords	user interface, design, management, systems, tools, CAD
series	CADline
last changed	2003/06/02 10:24

_id	896b
authors	Haider, Jawaid
year	1986
title	A Conceptual Framework for Communication -Instruction in Architectural Design
source	Pennsylvania State University
summary	Existing design models, it is generally acknowledged, are inadequate to deal with the complexity of contemporary situations; and an assessment of self-conscious design manifests a slow development in the power and scope of conceptualizing. The quality of knowledge and conceptual tools available to the designer largely determine his ability to conceive and accomplish; conversely, the limitations of method are reflected in design solutions. Some emerging social problem-solving paradigms, which seek to construct a cognitive psychology of problem solving, have a direct relevance to architectural design. Notwithstanding the traditional criticism and scepticism, problem solving is predicated by task environment and problem space as these have a significant impact on design synthesis. Despite a rigorous search for theoretical perspectives and methods, the concern for the quality of the physical environment persists unabated. Historically, architecture has depended on other disciplines for its theoretical insight; but the application of borrowed theories without a viable framework for translation has often resulted in misinterpretation. Aggravating the problem is the art-science controversy which has consequences for architectural practice and education. What is required is a unified approach encompassing the scientific and artistic modes of inquiry. But a unified perspective, involving vast and disparate areas of human knowledge, demands a conceptual framework for integrative learning. The proposed model of this study provides such a framework and calls for a re-examination of the conventional boundaries of design disciplines. It advocates an interdisciplinary approach and recognizes the design process as inherently a learning process; this shifts the emphasis from product to process and allows students to plan and assess their own design/learning experience. While the study focuses on substantive issues, it identifies a strategy for integrative learning applicable within the existing context of design education. Despite its untested nature, the proposed model can become a vehicle for stimulating coordination of all facets of human knowledge and experience toward creative design synthesis. It inculcates a sense of critical assessment of generative ideas by presenting a conceptually clearer picture of the design process to elicit a response to and a better understanding of the task environment of architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	e65f
authors	Haines, Eric A. and Greenberg, Donald P.
year	1986
title	The Light Buffer: A Shadow-Testing Accelerator
source	IEEE Computer Graphics and Applications. September, 1986. vol. 6: pp. 6-16 : col. ill. includes bibliography
summary	In one area of computer graphics, realistic image synthesis, the ultimate goal is to produce a picture indistinguishable from a photograph of a real environment. A particularly powerful technique for simulating light reflection - an important element in creating this realism - is called ray tracing. This method produces images of excellent quality, but suffers from lengthy computation time that limits its practical use. This article presents a new method to reduce shadow testing time during ray tracing. The technique involves generating light buffers, each of which partitions the environment with respect to an individual light source. These partition descriptions are then used during shadow testing to quickly determine a small subset of objects that may have to be tested for intersection. The results of timing tests illustrate the beneficial performance of these techniques. The tests compare the standard ray-tracing algorithm to light buffers of varying resolution
keywords	realism, synthesis, ray tracing, algorithms, computer graphics, shadowing
series	CADline
last changed	2003/06/02 13:58

_id	7f64
authors	Harfmann, A.C., Swerdloff, L.M. and Kalay, Y.E.
year	1986
title	The Terminal Crit
doi	https://doi.org/10.52842/conf.acadia.1986.079
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 79-87
summary	Numerous attempts have been made to develop formal design methods with -the purpose of increasing the predictability, consistency and dissemination of the design process and improving the quality of the objects produced. The ill- structured nature of design, and the perception of design activities as intuitive and experience dependent have frustrated many of the efforts to structure these process. The growing complexity of the built environment and advances in technology have led to a more rigorous effort to understand and externalize creative activities. Computer aided design tools have recently been playing an important role in the evolution of the design process as a rationally defined activity. The use of- computers for drafting, analysis, and 2 or 3 dimensional modeling is rapidly becoming an accepted method in many design schools and practitioners. A next logical step in the externalization of the design process is to endow the computer with the ability to manipulate and critique parts of the design. Under this scenario, the "terminal crit" is redefined to mean critiques that are carried out by both the designer and the computer. The paper presents the rationalization of the design process as a continuum into which CAD has been introduced. The effects of computers on the design process are studied through a specific incorporation of CAD tools into a conventional design studio, and a research project intended to advance the role of CAD in design.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	2156
authors	Hashimshony, Rivka, Roth, J. and Wachman, A.
year	1986
title	A Model for Generating Floor-Plans in Multi-Story Buildings
source	International Journal of Design Computing. April, 1986. vol. 1: pp. 136-157 : ill. includes bibliography
summary	A graph-theoretic method for computer generation of rectangular floor plans for multi-story buildings is outlined. The problem formulation takes account of adjacency requirements of rooms, dimensional constraints, and the need for vertical alignments of elements such as stairs and elevators. The solution method is to first turn the required adjacencies graph into a layout graph by adding edges, then color and direct the layout graph, cut the colored directed graph into two subgraphs, and finally use the PERT technique to dimension the plan. An example problem of design of a medical clinic is formulated and solved using this method
keywords	space allocation, architecture, CAD, floor plans, synthesis, graphs, dimensioning
series	CADline
last changed	2003/06/02 10:24

_id	caadria2009_053
id	caadria2009_053
authors	Hu, Hui-Jiun; Jen Yen
year	2009
title	Conceptual Model for Design Team toward Website Construction
doi	https://doi.org/10.52842/conf.caadria.2009.503
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 503-510
summary	Since mid 1990s internet has been developing rapidly to become the most booming and emerging media in late history and play an important role in living. Therefore, how to design an interface of easy to use has become an important issue pertaining to Human Computer Interaction. Norman (1986) proposed in the human computer interaction, there is a design model in the mind of designer. In turn, the designer will follow design model and to design a set of system image that is functional, learnable, and usable. Therefore, we want to understand the critical factor of influencing toward website construction, we should find out the mental model that web design team at first. In this paper, we using the Interactive Qualitative Analysis (IQA) approach. The data collection method of the participant of the focus group’s silent brainstorming is adopted. Further analyze web design team’s the conceptual model on website construction through inductive coding and axial coding. The result shows the affinities of 9 web design team is thus produced. And, Business Decision, Team Performance, Self-Fulfillment and Entrepreneur Communication are main influence factor. These factors can lead trend and goal of a website.
keywords	website construction; web design team; conceptual model; Interactive Qualitative Analysis (IQA)
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	e12d
authors	Johnson, Robert E.
year	1986
title	Micro-computers and Computer Aided Design Instruction
doi	https://doi.org/10.52842/conf.acadia.1986.173
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 173-181
summary	During the past few years we have been involved in a variety of experiments that teach the use of computers to non-computer oriented architecture students. These teaching experiences have led to the development of an experimental, entry-level course in computer-aided architectural design using the Macintosh personal computer. Objectives of this course included: a) to provide an introductory course to students with little or no prior computer experience, b) to use the course as a vehicle for illustrating principles of computer-aided design, c) to course so that it would be applicable to design in general, not just architectural design, and d) whenever possible, to use "off the shelf', generic, readily accessible software. The history of these developments will be presented along with a very preliminary evaluation of results.
series	ACADIA
last changed	2022/06/07 07:52

For more results click below: