Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 213

Reformat results as: short short into frame detailed detailed into frame

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	0a6e
authors	Walters, Roger
year	1986
title	CAAD: Shorter-term Gains; Longerterm Costs?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 185-196
summary	Assessment of CAAD systems in use is complex: it needs careful qualifications and is often contradictory. It is suggested that little progress has been made in making sense of the impacts of computing on design and design organizations. Impacts are more diverse and complicated than has been assumed. Assessments tend to be either overtly optimistic or pessimistic, yet the need is to be realistic. Moreover, impacts have been the subject of speculation and marketing rather than systematic study. Carefully documented case studies of projects or longitudinal studies of organizational impacts remain the exception. This chapter draws upon recorded user experience reported elsewhere (Walters, 1983)' and presents an assessment of the performance in use of current production systems. It presents an end-user view and also identifies a number of outstanding design research topics It is suggested that different systems in different organizations in different settings will give rise to new impacts. A wide variety of outcomes is possible. It seems unlikely that any simple set of relationships can account for all the data that inquiry reveals. The task becomes one of identifying variables that lead to differential outcomes, as the same cause may lead to different effects (Attewell and Rule, 1984). This becomes a long-term task. Each optimistic impact may be countered by some other more pessimistic impact. Moreover, the changes brought about on design by computing are significant because both beneficial and non- beneficial impacts are present together. Impacts are held in a dynamic balance that is subject to constant evolution. This viewpoint accounts for otherwise conflicting conclusions. It is unlikely that the full range of impacts is yet known, and a wide range of impacts and outcomes already need to be taken into account. It seems that CAD alone cannot either guarantee improved design or that it inevitably leads to some diminished role for the designer. CAD can lead to either possible outcome, depending upon the particular combination of impacts present. Careful matching of systems to design organization and work environment is therefore needed. The design management role becomes crucial.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	0918
authors	Christiansson, Per
year	1986
title	Swedish and Nordic Activities within CAAD
source	computer Aided Architectural Design - Developments in Education and Practice. 1986. 9 p. includes bibliography
summary	During the last few years there has been an increasing interest in the Nordic countries concerning effective use of computer resources in the building process. Swedish and Nordic research and development within CAAD and adjoining areas is briefly accounted for to give a flavor of ongoing and planned activities. A Nordic Action Program for promoting Nordic joint research and development efforts is also presented. The Nordic educational activities within CAAD are also briefly commented on
keywords	CAD, building process, construction
series	CADline
last changed	1999/02/12 15:07

_id	014f
authors	Christiansson, Per
year	1986
title	Integrated Building CAD at the Lund Institute of Technology, Department of Structural Engineering
source	1986. 8 p. Includes Per Christiansson reports and publication list
summary	A description of the department, equipment, research projects and education
keywords	education, CAD, engineering, architecture
series	CADline
last changed	1999/02/12 15:07

_id	31d5
authors	Delisle, N. and Schwartz, M.
year	1986
title	Neptune: A Hypertext System for CAD Applications
source	Proceedings ofACM SIGMOD International Conference on Management of Data, (Washington D.C., May 28-30 1986) pp. 132-143
summary	Even though many of the essential notions of hypertext were first contained in the description of a "memex," written by Vannevar Bush in 1945, there are today only a few scattered implementatlons of hypertext, let alone any serious use of it in a CAD environment. In what follows, we describe what hypertext is all about We describe a prototype hypertext system, named Neptune, that we have built.
series	other
last changed	2003/04/23 15:50

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	ad96
authors	Gudes, Ehud and Bracha, Gilad
year	1986
title	GCI : A Tool for Developing Interactive CAD User Interfaces
source	26 p. : ill. Israel: 1986? includes bibliography
summary	GCI is a Unix based tool for developing interactive CAD programs. By separating command/menu definitions from the program, GCI makes it easier to change and extend the user interface. The language provided by GCI is used to define syntax of commands, menus, messages, and help text. Generally, GCI supports a static hierarchical structure of commands and menus. However, through a program interface, an application program has the freedom to change environments, commands and menus. This flexibility of run-time control of the user interface is essential for developing highly responsive interfaces in a CAD environment. This paper presents the main concepts and definition language of GCI. It then discusses architectural and implementation issues, and finally presents a typical application's view of using the tool
keywords	user interface, design, management, systems, tools, CAD
series	CADline
last changed	2003/06/02 10:24

_id	c55f
authors	Kalay, Yehuda E.
year	1986
title	The Impact of CAD On Architectural Design Education in the United States
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 348-355
doi	https://doi.org/10.52842/conf.ecaade.1986.348
summary	Computer-Aided Design (CAD) began to appear in schools of architecture in the United States over 15 years ago. By 1982, over 50% of all accredited schools of architecture in North America included some form of CAD in their curricula. This number has continued to steadily increase. For the most part, the use of CAD has been restricted to the few individuals working on special "CAD projects" and to the researchers developing CAD products. The reasons for this limitation have included the low availability, difficulty of use, restricted access and high cost of the CAD systems, as well as limited faculty and administrative support. Recently, however, partly due to the introduction of micro- computer CAD software, and partly due to the growing awareness of the importance of CAD in architectural education and practice, some schools have begun to introduce CAD as part of the general design curriculum.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8e43
authors	Katz, R., Chang, E. and Bhateja, R.
year	1986
title	Version Modeling concepts for Computer-Aided Design Databases
source	ACM SIGMOD Intl. Conf On Management of Data
summary	We describe a semantic object-oriented data model for representing how a complex design database evolves over time. Structural relationships, introduced by the data management system, are imposed on the objects created by existing CAD tools. The relationships supported by the model are (1) version histories, (2) time-varying configurations, and (3) equivalences among objects of different types. We describe mechanisms for (1) identifying current versions, (2) supporting dynamic configuration binding, and (3) verifying equivalence relationships. The data model is being implemented in a Version Server, under development at the University of California, Berkeley.
series	other
last changed	2003/04/23 15:14

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	c714
authors	Majchrzak, Collins, P. and Mandeville, D.
year	1986
title	A Quantitative Assessment of Changes in Work Activities Resulting from Computer-Assisted Design
source	Behaviour and Information Technology 1986 v.5 n.3 p.259-271
summary	In an effort to understand how computer-assisted design (CAD) can be optimized in an organizational setting, perceptions and attitudes of CAD users about their jobs and workplace are compared with those of non-users. Results indicate that the implementation of CAD may not result in the expected benefits if CAD is not appropriately managed. Job unpredictability, job autonomy, and job interdependence are three areas in particular needing management attention if CAD benefits are to be achieved.
series	other
last changed	2002/07/07 16:01

_id	23f4
authors	Morgan, Charles F.
year	1986
title	Conceptual Design on a Microcomputer
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 89-102
doi	https://doi.org/10.52842/conf.acadia.1986.089
summary	As most computer users in the profession of Architecture recognize, computer usage in the profession, while increasingly widespread, is limited in scope. Architects may use the computer for word processing, estimating, office management and drawing production, but for the work most central to their profession, building design, the computer Is used very little. While computer software and hardware vendors try to maintain the utility of their wares in this area, their misunderstanding of the differences among engineering, CAD/CAM, and Architecture shows in the inappropriateness of most systems for conceptual architectural design. While some software and systems address basic architectural design, most are incapable of the transition to design development, with its need for more symbolic information.
series	ACADIA
last changed	2022/06/07 07:58

_id	4f56
authors	Paasi, Jyrki
year	1986
title	Architectural Space Synthesizer - The last link of a CAAD system
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 217-223
doi	https://doi.org/10.52842/conf.acadia.1986.217
summary	Computer technology and CAD are about to change radically the thousands of years of tradition of the architect's work. We are leaving behind the old method of drawing by hand, replacing the pencil with a stylus for pointing elements of mathematical models of projects. We are changing over from two dimensional to three dimensional design. Decisive for the architect to achieve a successful outcome has always been and will always be the visualisation of the project right from its early stages. There is a trend -in our time and a risk in the. new technology of fragmenting our work and making it more abstract. The new technology is based on the old one and in the beginning its user still has the habits of the old. Therefore the visualisation in present CAD systems and three dimensional design is based on the old plane projections; axonometrics and perspectives. However, there is an essentially better way which happens also to be natural to the new technology and simple to realize using it. This is the spherical projection.
series	ACADIA
last changed	2022/06/07 07:58

_id	6075
authors	Paasi, Jyrki
year	1986
title	The space synthesizer of Helsinki University of Technology
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 253-257
doi	https://doi.org/10.52842/conf.ecaade.1986.253
summary	Computer technology and CAD are about to change radically the thousands of years of tradition of the architect's work. We are leaving behind the old method of drawing by hand, replacing the pencil with a stylus for pointing elements of mathematical models of projects. We are changing over from two dimensional to three dimensional design. Decisive for the architect to achieve a successful outcome has always been and will always be the visualisation of the project right from its early stages. There is a trend in our time and a risk in the new technology of fragmenting our work and making it more abstract. The new technology is based on the old one and in the beginning its user still has the habits of the old. Therefore the visualisation in present CAD systems and three dimensional design is based on the old plan projections; axonometrics and perspectives. However, there is an essentially better way which happens also to be natural to the new technology and simple to realize using it. This is the spherical projection.
series	eCAADe
last changed	2022/06/07 07:58

_id	7a08
authors	Smith Shaw, Doris
year	1986
title	Case Studies in Architectural CADD Education
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 157-172
doi	https://doi.org/10.52842/conf.acadia.1986.157
summary	Stages in the formation of concepts necessary for mastery can be observed in cognitive development in many different areas of study. These stages seem to follow a particular hierarchy common to most learners. Distinct levels can be recognized by patterns of procedural errors. The remediation of errors can then take the form of building a conceptual framework rather than training in procedural patterns. This has been found to be highly efficient for learners at all stages since it can be aimed at the underlying problem area and not at isolated errors which may change frequently. It was felt, that concept development of architects learning to use computer-aided drawing programs would show such levels. Preliminary studies made at the U.S. Army Construction Engineering Research Laboratory upon selected subjects using computer-aided lessons in AutoCAD as a basis for observations reveal several categories of errors in using computer-aided design. These case studies show that the design process can be enhanced by automated drawing and design tools if the conceptual relationships are established as a part of the learning environment. Even more important, the observations show that architects have particular characteristics which differ from engineers and other CAD users. These differences require that education and software be tailored to their needs.
series	ACADIA
last changed	2022/06/07 07:56

_id	6686
authors	Straub, K.
year	1986
title	Problems in CAD Practice
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 232-234
summary	CAD's greatest promise is as a creative, interactive tool, and planning and construction will be more complex as the need to expand information grows. Our tools not only shape our products, they shape our lives. Technology can influence everyday life and also affect the structure of our society. Architecture is an information-intensive profession, and throughout the world information-intensive activities are being changed by technology. The use of computer-aided information processing in planning and construction brings about a period of dramatic change, and the dimensions of technological change will be breathtaking. In the years to come, CAD will be an expanding field in the architectural office, but how long will it be before architecture is routinely produced on a CAD system? There appear to be three issues: (1) cost; (2) time; (3) quality.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

For more results click below: