Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 210

Reformat results as: short short into frame detailed detailed into frame

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
doi	https://doi.org/10.52842/conf.ecaade.1986.167
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	a3bd
authors	Beretta Covacivich, N., loannilli, M., Lazzari, M., Scandurra E. and Schiavoni U.
year	1986
title	Urban Planning Computer Aided Methods
doi	https://doi.org/10.52842/conf.ecaade.1986.180
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 180-185
summary	In the practice of urban centers analysis and of urban planning projects, a noticeable aspect is the absence of some essential information required in the planning process due to the natural difficulty to manage the numerous data to process.
series	eCAADe
last changed	2022/06/07 07:54

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	0354
authors	Goodman, Gary and Reddy, Raj D.
year	1978
title	Alternative Control Structures for Speech Understanding Systems
source	1978 ? [13] p. : ill. includes bibliography Control structures are an essential part of any speech recognition system. They are the devices by which passive knowledge about the task and language is transformed into active and effective processes. In the chapter, three areas of control structures are defined and discussed: knowledge source interaction, knowledge source activation, and knowledge source focusing. Discussion relates the concepts presented to systems developed during the five-year ARPA speech understanding project. speech recognition / systems / control / structures / AI. 64. Goodman, Tim and Keith Unsworth. 'Manipulating Shape and Producing Geometric Continuity in B-spline Curves.' IEEE Computer Graphics and Applications. February, 1986. vol. 6: pp. 50-56 : ill. includes bibliography.
summary	This article examines some of the desirable features of B- splines that make them particularly suitable for computer- aided design. First, a theoretical analysis is presented regarding the effects upon the shape of a design curve when the bias and tension parameters are allowed to vary in certain ways. Second, the concept of geometric continuity is discussed, and conditions are derived upon the control vertices to ensure that the design curve has second-order geometric continuity. Illustrations of B-spline curves are presented to support the theoretical conclusions
keywords	computational geometry, B-splines, curves, CAD
series	CADline
last changed	2003/06/02 13:58

_id	7f64
authors	Harfmann, A.C., Swerdloff, L.M. and Kalay, Y.E.
year	1986
title	The Terminal Crit
doi	https://doi.org/10.52842/conf.acadia.1986.079
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 79-87
summary	Numerous attempts have been made to develop formal design methods with -the purpose of increasing the predictability, consistency and dissemination of the design process and improving the quality of the objects produced. The ill- structured nature of design, and the perception of design activities as intuitive and experience dependent have frustrated many of the efforts to structure these process. The growing complexity of the built environment and advances in technology have led to a more rigorous effort to understand and externalize creative activities. Computer aided design tools have recently been playing an important role in the evolution of the design process as a rationally defined activity. The use of- computers for drafting, analysis, and 2 or 3 dimensional modeling is rapidly becoming an accepted method in many design schools and practitioners. A next logical step in the externalization of the design process is to endow the computer with the ability to manipulate and critique parts of the design. Under this scenario, the "terminal crit" is redefined to mean critiques that are carried out by both the designer and the computer. The paper presents the rationalization of the design process as a continuum into which CAD has been introduced. The effects of computers on the design process are studied through a specific incorporation of CAD tools into a conventional design studio, and a research project intended to advance the role of CAD in design.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	caadria2009_053
id	caadria2009_053
authors	Hu, Hui-Jiun; Jen Yen
year	2009
title	Conceptual Model for Design Team toward Website Construction
doi	https://doi.org/10.52842/conf.caadria.2009.503
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 503-510
summary	Since mid 1990s internet has been developing rapidly to become the most booming and emerging media in late history and play an important role in living. Therefore, how to design an interface of easy to use has become an important issue pertaining to Human Computer Interaction. Norman (1986) proposed in the human computer interaction, there is a design model in the mind of designer. In turn, the designer will follow design model and to design a set of system image that is functional, learnable, and usable. Therefore, we want to understand the critical factor of influencing toward website construction, we should find out the mental model that web design team at first. In this paper, we using the Interactive Qualitative Analysis (IQA) approach. The data collection method of the participant of the focus group’s silent brainstorming is adopted. Further analyze web design team’s the conceptual model on website construction through inductive coding and axial coding. The result shows the affinities of 9 web design team is thus produced. And, Business Decision, Team Performance, Self-Fulfillment and Entrepreneur Communication are main influence factor. These factors can lead trend and goal of a website.
keywords	website construction; web design team; conceptual model; Interactive Qualitative Analysis (IQA)
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	682d
authors	Kim, Uk
year	1986
title	Model for an Integrated Design Evaluation System using Knowledge Bases
doi	https://doi.org/10.52842/conf.acadia.1986.204
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 204-215
summary	Computer-aided architectural design (CAAD) systems need to be integrated so that one unified system can generate and do various analysis and evaluation of building models. A data system can not solve this problem because all design concepts can not be stored in the database before the design is completed. As design stage proceeds, design concept and necessary information for analysis and evaluation become complex and detailed. In order to accommodate increasing entities and new relationships between them, knowledge-based systems are integrated into the database of building models. frame structure and production rules are adopted to represent knowledge about the database, and to represent evaluation rules respectively. The system is implemented in Prolog on an Apollo workstation.
series	ACADIA
last changed	2022/06/07 07:52

_id	8190
authors	Lawson, B.
year	1986
title	Teaching CAAD at Sheffield University
doi	https://doi.org/10.52842/conf.ecaade.1986.078
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 78-87
summary	The University of Sheffield Department of Architecture has been using Computer Aided Architectural Design in its teaching now for over ten years. During that time there has also been a major research unit in CAAD working in the department and most of the software used in our teaching programme has originated in our own research unit. Our students have now got access to a wide range of CAAD programs including 2D draughting, 3D colour visualisation, environmental analysis, structural design and cost estimating. We have generated our own specialised systems of terrain modelling and intelligent building modelling which link to both the visualisation and environmental appraisal software. Students also have access to data base and word processing software. CAAD has been used in all five years of our course and we also have students working .with CAAD during their professional experience years. Over this ten year period we have gradually altered and refined our approach to the educational use of CAAD and this paper will describe this approach and present some of the lessons we have learnt. I want to organise the paper into two main sections; firstly what are we trying to achieve by teaching CAAD on our course, and secondly, how do we fit this into the curriculum and what effect does it have.
series	eCAADe
last changed	2022/06/07 07:52

_id	a980
authors	Rosenman, Michael A., Gero, John S. and Hutchinson, Peter J. (et al)
year	1986
title	Expert Systems Applications in Computer-aided Design
source	Guildford: Butterworth, 1986. pp. 218-225. Reprinted in Computer Aided Design 18(10): pp. 546-551
summary	Rule-based expert system shells are demonstrated to be useful in elementary design decision making. Two applications are presented which utilize the BUILD shell. The first is concerned with the selection and design of earth-retaining structures and makes use of passive graphics in descriptions. The second is concerned with the analysis and synthesis of kitchens and uses graphics to allow the user to interact with the system. Such systems are useful when the range of options is small
keywords	applications, CAD, expert systems, design process, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	6c8e
authors	Barbera, Salvatore and Correnti, Gabriele
year	1986
title	Reticular and Linear Planning of Erecting Yards Aided by Personal Computer
doi	https://doi.org/10.52842/conf.ecaade.1986.157
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 157-166
summary	This study has been carried out during the Course of Ergotecnica Edile hold at the Instituto Dipartimentale di Architettura e Urbanistica of Catania University, and it has been addressed to the students of the Faculty of Civil Engineering (manufacturing and direction of civil works). The present study aims at instructing the students as refers to planning, through computers, erecting yards. Work-planning is specifically important with reference both to the starting program and to the carrying on of the work. Within this context, workplanning is useful as regard the control and contingent correction of the work. In the latter case, divergencies between work-evolution and forecast are of primary value.
series	eCAADe
last changed	2022/06/07 07:54

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	2eb1
authors	Bridges, Alan H.
year	1986
title	Alternative Approaches Towards the Teaching of Computer Aided Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1986.331
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 331-340
summary	The problems of architectural education in general and CAD education in particular are discussed. The paper suggests that the computing requirements of architectural practice are different to those of architectural education and that much of the software used in schools of architecture is not used in an educationally structured way. A number of proposals for the educational use of computers are made, together with recommendations for a common computing environment.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: