Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 168

Reformat results as: short short into frame detailed detailed into frame

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	4512
authors	Flemming, Ulrich
year	1986
title	On the Representation and Generation of Loosely-Packed Arrangements of Rectangles
source	33 p. : ill Pittsburgh: Engineering Design Research Center, CMU, September, 1986. includes bibliography.
summary	Several computer programs that enumerate rectangular dissections as solutions to certain layout problems have established a distinct paradigm for dealing with the crucial theoretical issues involved. The present paper suggests an extension of the paradigm to include `loosely-packed arrangements of rectangles,' which are of wider applicability in an architectural context. The paper introduces orthogonal structures to represent these arrangements and establishes the conditions of well-formedness for these structures. It presents a grammar to enumerate orthogonal structures and suggests that best use is made of the grammar if it is incorporated into a generative expert system, able to serve as a vehicle to discover, encode and utilize a broad range of constraints and criteria in the generation of layout alternatives
keywords	expert systems, architecture, space allocation, floor plans, rectangles, shape grammars, layout
series	CADline
email
last changed	2003/02/26 17:24

_id	a666
authors	Galle, Per
year	1986
title	Abstraction as a Tool of Automated Floor-Plan Design
source	Environment and Planning B: Planning and Design. 1986. vol. 13: pp. 21-46 : ill. includes bibliography
summary	The automated design of architectural floor plans satisfying given topological and dimensional constraints is a challenging field of research. In this paper ABSTRACTION is pointed out as an important conceptual tool of this field. A critical discussion of existing plan-design methods leads to the conclusion that the potentials of abstraction as a tool have not yet been fully recognized. The rest of the paper is an attempt to improve this situation by suggesting a new approach to automated floor-plan design. Theoretically, design is viewed as a one-to-many relation; a tree whose lines are directed from the root (the problem) towards the leaves (the solutions). Abstraction is viewed as the inverse many-to-one relation. A particular relation of abstraction is defined, such that the intermediate nodes of the tree (between root and leaves) are themselves floor plans, but are less detailed than the solutions. From the study of this concept of abstraction, it is concluded that the design algorithm based on it is likely to have certain useful properties
keywords	layout, automation, design, architecture, floor plans, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	2156
authors	Hashimshony, Rivka, Roth, J. and Wachman, A.
year	1986
title	A Model for Generating Floor-Plans in Multi-Story Buildings
source	International Journal of Design Computing. April, 1986. vol. 1: pp. 136-157 : ill. includes bibliography
summary	A graph-theoretic method for computer generation of rectangular floor plans for multi-story buildings is outlined. The problem formulation takes account of adjacency requirements of rooms, dimensional constraints, and the need for vertical alignments of elements such as stairs and elevators. The solution method is to first turn the required adjacencies graph into a layout graph by adding edges, then color and direct the layout graph, cut the colored directed graph into two subgraphs, and finally use the PERT technique to dimension the plan. An example problem of design of a medical clinic is formulated and solved using this method
keywords	space allocation, architecture, CAD, floor plans, synthesis, graphs, dimensioning
series	CADline
last changed	2003/06/02 10:24

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	cc5a
authors	Rasdorf, William J. and Wang, TsoJen E.
year	1986
title	Expert System Integrity Maintenance for the Use of Engineering Data
source	Computing in Civil Engineering Conference Proceedings (4th : 1986 : Boston, MA). American Society of Civil Engineers, pp. 654-668. CADLINE has abstract only
summary	This paper describes a mechanism that enables one to automatically monitor and evaluate the use of engineering design data. The framework, associated with a relational database management system, combines a database with a set of constraints on the use of engineering data. This requires a database that stores all of the data normally associated with engineering design as well as all of the domain-dependent constraints imposed upon the use of the design data. Such a framework has been successfully constructed and is described in this paper. An example, based on constraints extracted from the AISC Specification, is presented and the performance of the framework is discussed. The proposed framework resides between a DBMS and its users and serves as an experienced expert consultant to the users. It embodies the knowledge of the specific domain of interest; in this case, allowable stresses in steel members. Whenever a user retrieves data from the database, the mechanism is activated. It interprets data request, applies the appropriate constraints, and provides the correct data. Its understanding of the semantics of both the data request and its own constraints insures the validity of data it selects to return to the user. All previous database integrity research concentrated on maintaining the integrity of the stored data, i.e., on guaranteeing the integrity of any static state of the database. This paper advocates a mechanism for checking data being retrieved from the database as well as for checking data being inserted into the database. It deals, therefore, with the correctness of data being selected for use
keywords	information, civil engineering, expert systems, relational database
series	CADline
last changed	2003/06/02 13:58

_id	020d
authors	Shaviv, Edna
year	1986
title	Layout Design Problems: Systematic Approaches
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 28-52
summary	The complexity of the layout design problems known as the 'spatial allocation problems' gave rise to several approaches, which can be generally classified into two main streams. The first attempts to use the computer to generate solutions of the building layout, while in the second, computers are used only to evaluate manually generated solutions. In both classes the generation or evaluation of the layout are performed systematically. Computer algorithms for 'spatial allocation problems' first appeared more than twenty-five years ago (Koopmans, 1957). From 1957 to 1970 over thirty different programs were developed for generating the floor plan layout automatically, as is summarized in CAP-Computer Architecture Program, Vol. 2 (Stewart et al., 1970). It seems that any architect who entered the area of CAAD felt that it was his responsibility to find a solution to this prime architectural problem. Most of the programs were developed for batch processing, and were run on a mainframe without any sophisticated input/output devices. It is interesting to mention that, because of the lack of these sophisticated input/output devices, early researchers used the approach of automatic generation of optimal or quasioptimal layout solution under given constraints. Gradually, we find a recession and slowdown in the development of computer programs for generation of layout solutions. With the improvement of interactive input/output devices and user interfaces, the inclination today is to develop integrated systems in which the architectural solution is obtained manually by the architect and is introduced to the computer for the appraisal of the designer's layout solution (Maver, 1977). The manmachine integrative systems could work well, but it seems that in most of the integrated systems today, and in the commercial ones in particular, there is no route to any appraisal technique of the layout problem. Without any evaluation techniques in commercial integrated systems it seems that the geometrical database exists Just to create working drawings and sometimes also perspectives.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
doi	https://doi.org/10.52842/conf.ecaade.1986.167
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	c211
authors	Brown, A.G.P.
year	1986
title	A Year's Experience with CATIA and CADAM
doi	https://doi.org/10.52842/conf.ecaade.1986.007
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 7-16
summary	In June 1985 Liverpool University obtained the CAD packages CATIA and CADAM to run on its IBM 4341 mainframe. The following is a brief description of the investigations which have taken place in the first year of their implementation to gauge the usefulness of these packages, principalLy as CAAD teaching aids. Neither CATIA nor CADAM were initially developed as architectural design aids so a matter of initial concern was their appropriateness for teaching (and possibly research) in an architectural environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6f29
authors	Cardozo, E. and Talukdar, Sarosh N.
year	1986
title	A Distributed Control Strategy for Energy Management Centers
source	[4] p. : ill Pittsburgh: Engineering Design Research Center, CMU, September, 1986. EDRC-05-07-86. includes bibliography.
summary	Intelligent, computer-based assistants can serve as statisticians, historians, diagnosticians, watchdogs, consultants, tutors and planners. They could be of great help to power system operators. This paper briefly describes a typical intelligent assistant, and discusses the difficulties with integrating it into a traditional energy management system
keywords	energy, analysis, intelligence, systems, applications
series	CADline
last changed	2003/06/02 13:58

_id	2b3c
authors	Carrara, G. and Novembri, G.
year	1986
title	KAAD - Knowledge-based Assistance for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1986.202
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 202-212
summary	The research being conducted at the CABD LAB at the Department of Building and Environmental Control Technologies is geared to the production of an Expert System for architectural design, which is able to perform interactive design tasks and help to provide accurate and complete description of the buildings in question. The Expert System will control the design process, continually ensuring consistency between the definitions of the designer and a given set of constraints. Accordingly, the System will be able to determine the effects of of definition, performing the choices taken at different stages necessary calculations and checks. The System is based on a general representation of the building objects, from individual components to the whole building defined in terms of a number of hierarchical, topological and functional relational structures resulting from earlier research conducted into the automatic management of architectural design since 1975.
series	eCAADe
last changed	2022/06/07 07:54

_id	63d0
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Constraint-bounded design search
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 146-157
summary	The design process requires continual checking of the consistency of design choices against given sets of goals that have been fulfilled. Such a check is generally performed by comparing abstract representations of design goals with these of the sought real building objects (RBO) resulting from complex intellectual activities closely related to the designer's culture and to the environment in which he operates. In this chapter we define a possible formalization of such representations concerning the goals and the RBO that are usually considered in the architectural design process by our culture in our environment. The representation of design goals is performed by expressing their objective aspects (requirements) and by defining their allowable values (performance specifications). The resulting system of requirements defines the set of allowable solutions and infers an abstract representation of the sought building objects (BO) that consists of the set of characteristics (attributes and relations) which are considered relevant to represent the particular kind of RBO with respect to the consistency check with design goals. The values related to such characteristics define the performances of the RBO while their set establishes its behaviour. Generally speaking, there is no single real object corresponding to an abstract representation but the whole class of the RBO that are equivalent with respect to the values assumed by the considered characteristics. The more we increase the number of these, as well as their specifications, the smaller the class becomes until it coincides with a single real object - given that the assessed specifications be fully consistent. On the other hand, the corresponding representation evolves to the total prefiguration of the RBO. It is not therefore possible to completely define a BO representation in advance since this is inferred by the considered goals and is itself a result of the design process. What can only be established in advance is that any set of characteristics assumed to represent any RBO consists of hierarchic, topological, geometrical and functional relations among the parts of the object at any level of aggregation (from components to space units, to building units, to the whole building) that we define representation structure (RS). Consequently the RS may be thought as the elementary structures that, by superposition and interaction, set up the abstract representation that best fit with design goals.
series	CAAD Futures
last changed	1999/04/03 17:58

For more results click below: