Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 206

Reformat results as: short short into frame detailed detailed into frame

_id	c967
authors	Fantacone, Enrico
year	1994
title	Exporting CAD Teaching into Developing Countries
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 222
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t3s
summary	In 1986 the Faculty of Architecture was established in Maputo. It is financed by the Italian Ministry of Foreign Affairs and managed by a Scientific Council of the Faculty of Architecture of "Università La Sapienza" of Rome. The need to create human technical resources beeing able to work profesionally as soon as they finish their studies, made the teaching basis for lab exercises and design. The new architects (the first six students graduated in 1991), need to design and make very important decisions without any control by more experienced local technical institutions. The creation of a CAAD laboratory, and the teaching of information technologies and metodologies in architectural designing aimes to achieve a double goal: (-) to make the new architects able to manage on their own, because of the lack of qualified human resources, large quantity of data, and difficult design problems; (-) to make University, the most important scientific center in the country, an information exchange center between developped countries, and Moçambique.
series	eCAADe
last changed	2022/06/07 07:50

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	ba6b
authors	Neuckermans, Herman
year	1986
title	The Intelligent Pencil: A framework for CAAD in Education
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 113-128
doi	https://doi.org/10.52842/conf.acadia.1986.113
summary	Computer Aided Architectural Design in Education (CAADE) can only be meaningful if it brings meaningful answers to meaningful questions about architecture and architectural education. In the discourse about CAAD and CAADE these questions are completely absent; this can be concluded from: (1.) an absolute lack of architectural-theoretical and historical reflection, without which no architecture can exist; (2.) a frequent confusion between designing and drawing : the latter being a non neutral tool for the former; (3.) the absence of a clear understanding of the way in which architecture comes about: what are the concepts and entities an architect is working with and how does he manipulate them? (4.) no clear insights about the way architectural "design by hand" should be taught and a fortiori about the way a computer could help.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	ae5f
authors	Krishnamurti, Ramesh
year	1986
title	Modelling Design Descriptions
source	January, 1986. [5] p. : ill
summary	This paper reports some of the principles that underlie a modelling environment being developed at EdCAAD. It describes research that is part of a larger programme directed at computer-based systems that can accommodate the idiosyncratic nature of design practice, without prescriptions to the form or content of designs. That is, towards developing systems to assist in the design process by enabling designers -via conversations with the machine - to make 'reasonable' statements about design objects; to ask 'reasonable' questions about these objects; and to perform 'reasonable' tasks on these objects. Implicit in the authors' approach is the view that designing is an activity dependent on designers' perceptions of design tasks and their resolution. In the context of computer-aided design, this view of design demands that the crucial element in any machine environment lies in the ability of the machine to accept (partial) descriptions of design objects. Moreover, these descriptions can be manipulated according to some (perhaps unanticipated) criteria that the designer may wish to apply. The authors present a model for intentional descriptions of objects. That is, a description that can be structures so that it can be used to recognize objects and can be compared with other descriptions. Such a description of an object should be organized around entities with associated descriptions, it must be able to represent partial knowledge about an object, and it must accommodate multiple descriptors which can describe the object from different viewpoints. Last, but not least, these descriptions should possess a quality of 'truth' in that they reflect the (factual or otherwise) beliefs held by the designer. One way to treat these descriptions is to regard them as statements that belong to some logical framework
keywords	design process, representation, intentionallity
series	CADline
last changed	1999/02/12 15:08

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
doi	https://doi.org/10.52842/conf.ecaade.1986.167
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
doi	https://doi.org/10.52842/conf.acadia.1986.037
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	2eb1
authors	Bridges, Alan H.
year	1986
title	Alternative Approaches Towards the Teaching of Computer Aided Architectural Design
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.1986.331
summary	The problems of architectural education in general and CAD education in particular are discussed. The paper suggests that the computing requirements of architectural practice are different to those of architectural education and that much of the software used in schools of architecture is not used in an educationally structured way. A number of proposals for the educational use of computers are made, together with recommendations for a common computing environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	a661
authors	Cajati, Claudio and Calandro, Lucia
year	1986
title	Architectural analysis of buildings in order to choice new functional destinations: an application of computer graphics for Faculty of Architecture's students
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 17-19
doi	https://doi.org/10.52842/conf.ecaade.1986.017
summary	The research tries to give a little but meaningful answer to the specific context of the Faculty of Architecture of Naples. Such a context presents a delay of teachers and researchers, in their teaching and researching activity, in beginning the CAAD way. Often the delay is due to a wrong attitude: a too high or too low expectation towards the use of the computer. In such a situation, the chief target of the research is the student of architecture. It is possible and useful to address a clear message, by a simple educational material, just to the student of architecture; not necessarily by producing a software or modifying some existing one, but also applying a given available software to an important architectural question.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c8a8
authors	Cajati, Claudio
year	1986
title	A Fully Integrated Use of Available Media and of Computer Technology for Up-to-date Educational Tools in Architecture
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 129-147
doi	https://doi.org/10.52842/conf.acadia.1986.129
summary	In this paper no general or specific forecast is- made about what is going to happen in the next decade in architectural education. No extrapolation and projection in the future, through more or 1e33 sophisticated technique3, of plausible trends is attempted. Such an effort goes beyond the competence and inteffectual force of the author.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	e73e
authors	Christiansson, Per
year	1990
title	State of the Art of Computer Use in Practical Architectural Design in Sweden
source	A/E/C Systems Japan. September, 1990. [4] p. English and Japanese
summary	A status report on Computer Aided Design in Sweden, since 1986
keywords	CAD, architecture, practice
series	CADline
last changed	1999/02/12 15:07

_id	2e43
authors	Cipriani, Roberto and Decri, Anna
year	1986
title	Approaching CAAD at Facolta' Di Architettura, Genova
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 213-222
doi	https://doi.org/10.52842/conf.ecaade.1986.213
summary	This paper describes a few aspects of the current research and teachings in the field of CAAD in the School of Architecture at the University of Genoa. In particular it analyses the capacity of a small system, which a single professional can afford and which provides a simple approach for the teaching of automatic drawing. This analysis has not yet been completed because it is a part of a thesis which is currently being written.
series	eCAADe
last changed	2022/06/07 07:52

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	4512
authors	Flemming, Ulrich
year	1986
title	On the Representation and Generation of Loosely-Packed Arrangements of Rectangles
source	33 p. : ill Pittsburgh: Engineering Design Research Center, CMU, September, 1986. includes bibliography.
summary	Several computer programs that enumerate rectangular dissections as solutions to certain layout problems have established a distinct paradigm for dealing with the crucial theoretical issues involved. The present paper suggests an extension of the paradigm to include `loosely-packed arrangements of rectangles,' which are of wider applicability in an architectural context. The paper introduces orthogonal structures to represent these arrangements and establishes the conditions of well-formedness for these structures. It presents a grammar to enumerate orthogonal structures and suggests that best use is made of the grammar if it is incorporated into a generative expert system, able to serve as a vehicle to discover, encode and utilize a broad range of constraints and criteria in the generation of layout alternatives
keywords	expert systems, architecture, space allocation, floor plans, rectangles, shape grammars, layout
series	CADline
email
last changed	2003/02/26 17:24

For more results click below: