Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 207

Reformat results as: short short into frame detailed detailed into frame

_id	cb04
authors	Calderaro, V., Giangrande, A., Mirabelli, P. and Mortola, E.
year	1986
title	Decision Support Systems (DSS) in Computer Aided Architectural Design (CAAD)
doi	https://doi.org/10.52842/conf.ecaade.1986.020
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 20-38
summary	The paper describes a new procedure of design management and the results of its application to architectural design in an exercise developed in a didactic context. The procedure requires the participation of all “actors” (i.e. designers, experts, clients, users, etc.) involved in the design process and which contribute, directly or indirectly, to obtain the result. By generating and developing alternative design solutions, this procedure allows the exploration of a region of the performances space which is generally more vast than that explored by the traditional designer.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6916
authors	Gasparski, W.
year	1986
title	Design Methodology: How I Understand and Develop it
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 16-27
summary	The term 'methodology' is sometimes given two diametrically opposed meanings, well characterized by Mark Blaug in the preface of a very informative book devoted to the methodology of economics. This is also the case with the methodology of design. One can find studies in which 'the methodology of design' is simply a method or methods of design, given a fancy name to make it or them appear more scientific. Authors of such studies should not confuse their readers by taking methodological studies to mean technicalities of design or demanding that their interpretation and assessment of so-called 'practical applicability' should follow this criterion. The methodology of design - as we understand it has parallels in the methodology of Blaug's economics, the philosophy of practical science, the applied sciences or the sciences of artificial objects or artefacts. Understood this way, the methodology of design is neither the method of practising design nor an instruction for its use but a theoretical reflection - in the meaning given to methodology by the philosophy of science - of design. In this connection a study of the methodology of design should be provided with the subtitle, 'How researchers of practical sciences and designers understand the concept of changes'.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	896b
authors	Haider, Jawaid
year	1986
title	A Conceptual Framework for Communication -Instruction in Architectural Design
source	Pennsylvania State University
summary	Existing design models, it is generally acknowledged, are inadequate to deal with the complexity of contemporary situations; and an assessment of self-conscious design manifests a slow development in the power and scope of conceptualizing. The quality of knowledge and conceptual tools available to the designer largely determine his ability to conceive and accomplish; conversely, the limitations of method are reflected in design solutions. Some emerging social problem-solving paradigms, which seek to construct a cognitive psychology of problem solving, have a direct relevance to architectural design. Notwithstanding the traditional criticism and scepticism, problem solving is predicated by task environment and problem space as these have a significant impact on design synthesis. Despite a rigorous search for theoretical perspectives and methods, the concern for the quality of the physical environment persists unabated. Historically, architecture has depended on other disciplines for its theoretical insight; but the application of borrowed theories without a viable framework for translation has often resulted in misinterpretation. Aggravating the problem is the art-science controversy which has consequences for architectural practice and education. What is required is a unified approach encompassing the scientific and artistic modes of inquiry. But a unified perspective, involving vast and disparate areas of human knowledge, demands a conceptual framework for integrative learning. The proposed model of this study provides such a framework and calls for a re-examination of the conventional boundaries of design disciplines. It advocates an interdisciplinary approach and recognizes the design process as inherently a learning process; this shifts the emphasis from product to process and allows students to plan and assess their own design/learning experience. While the study focuses on substantive issues, it identifies a strategy for integrative learning applicable within the existing context of design education. Despite its untested nature, the proposed model can become a vehicle for stimulating coordination of all facets of human knowledge and experience toward creative design synthesis. It inculcates a sense of critical assessment of generative ideas by presenting a conceptually clearer picture of the design process to elicit a response to and a better understanding of the task environment of architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	09b3
authors	Bier, Eric A. and Sloan, Kenneth R. Jr.
year	1986
title	Two-Part Texture Mappings
source	IEEE Computer Graphics and Applications September, 1986. pp. 40-53 : col. ill. includes bibliography.
summary	Most published techniques for mapping two-dimensional texture patterns onto three-dimensional curved surfaces assume that either the texture pattern has been predistorted to compensate for the distortion of the mapping or the curved surfaces are represented parametrically. The authors address the problem of mapping undistorted planar textures onto arbitrarily represented surfaces. Their mapping technique is done in two parts. First the texture pattern is embedded in 3- space on an intermediate surface. Then the pattern is projected onto the target surface in a way that depends only on the geometry of the target object (not on its parametrization). Both steps have relatively low distortion, so the original texture need not be predistorted. The authors also discuss interactive techniques that make two-part mapping practical
keywords	texture mapping, curved surfaces, computer graphics, rendering
series	CADline
last changed	2003/06/02 10:24

_id	4361
authors	Bishop, G. and Weimer, D.M.
year	1986
title	Fast Phong Shading
source	Computer Graphics (20) 4 pp. 103-106
summary	Computer image generation systems often represent curved surfaces as a mesh of polygons that are shaded to restore a smooth appearance. Phong shading is a well known algorithm for producing a realistic shading but it has not been used by real-time systems because of the 3 additions, 1 division and 1 square root required per pixel for its evaluation. We describe a new formulation for Phong shading that reduces the amount of computation per pixel to only 2 additions for simple Lambertian reflection and 5 additions and 1 memory reference for Phong's complete reflection model. We also show how to extend our method to compute the specular component with the eye at a finite distance from the scene rather than at infinity as is usually assumed. The method can be implemented in hardware for real-time applications or in software to speed image generation for almost any system.
series	journal paper
last changed	2003/11/21 15:16

_id	c211
authors	Brown, A.G.P.
year	1986
title	A Year's Experience with CATIA and CADAM
doi	https://doi.org/10.52842/conf.ecaade.1986.007
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 7-16
summary	In June 1985 Liverpool University obtained the CAD packages CATIA and CADAM to run on its IBM 4341 mainframe. The following is a brief description of the investigations which have taken place in the first year of their implementation to gauge the usefulness of these packages, principalLy as CAAD teaching aids. Neither CATIA nor CADAM were initially developed as architectural design aids so a matter of initial concern was their appropriateness for teaching (and possibly research) in an architectural environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4431
authors	Calderaro, V. and Platone, C.
year	1986
title	Information systems and internvention technologies programmed to aid the energy saving within the limits of the existing building property rescue
doi	https://doi.org/10.52842/conf.ecaade.1986.192
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 192-201
summary	In our national territory the rescue of the existing building property is a very important problem. For that reason, starting front the presupposition that the existing buildings, restoration finds its real achievement by means of technological and installing interventions strictly connected with the energy costs and consumptions, this study sets as a planning method on various degrees to analyze, single out and propose the possible solutions based on qualitative and quantitative researches into the thermo-physical behaviour of the above-mentioned buildings. From a research done into the principal building properties related with the different national areas we can single out significant morphological samples and typical technological structures. This first analytical study allows the singling out of significant building models on which it's possible to value the thermal behaviour and possible subsequent restoring interventions by applying computerized mathematical models or by operating diagrams deduced from them. First of all, these mathematical models for simulation allow a valuation of the main thermal parameters (dispersion both in absolute value and in volumetric factor, medium thermal transmittance (U value) of geometrical models deduced from the typical above - mentioned cases.
series	eCAADe
last changed	2022/06/07 07:54

_id	63d0
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Constraint-bounded design search
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 146-157
summary	The design process requires continual checking of the consistency of design choices against given sets of goals that have been fulfilled. Such a check is generally performed by comparing abstract representations of design goals with these of the sought real building objects (RBO) resulting from complex intellectual activities closely related to the designer's culture and to the environment in which he operates. In this chapter we define a possible formalization of such representations concerning the goals and the RBO that are usually considered in the architectural design process by our culture in our environment. The representation of design goals is performed by expressing their objective aspects (requirements) and by defining their allowable values (performance specifications). The resulting system of requirements defines the set of allowable solutions and infers an abstract representation of the sought building objects (BO) that consists of the set of characteristics (attributes and relations) which are considered relevant to represent the particular kind of RBO with respect to the consistency check with design goals. The values related to such characteristics define the performances of the RBO while their set establishes its behaviour. Generally speaking, there is no single real object corresponding to an abstract representation but the whole class of the RBO that are equivalent with respect to the values assumed by the considered characteristics. The more we increase the number of these, as well as their specifications, the smaller the class becomes until it coincides with a single real object - given that the assessed specifications be fully consistent. On the other hand, the corresponding representation evolves to the total prefiguration of the RBO. It is not therefore possible to completely define a BO representation in advance since this is inferred by the considered goals and is itself a result of the design process. What can only be established in advance is that any set of characteristics assumed to represent any RBO consists of hierarchic, topological, geometrical and functional relations among the parts of the object at any level of aggregation (from components to space units, to building units, to the whole building) that we define representation structure (RS). Consequently the RS may be thought as the elementary structures that, by superposition and interaction, set up the abstract representation that best fit with design goals.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	c62d
authors	Davis, Randall
year	1986
title	Knowledge-Based Systems
source	Science February, 1986. vol. 231: pp. 957-963 : ill. includes bibliography.
summary	First developed two decades ago, knowledge-based systems have seen widespread application in recent years. While performance has been a strong focus of attention, building such systems has also expanded our conception of a computer program from a black box providing an answer to something capable of explaining its answers, acquiring new knowledge, and transferring knowledge to students. These abilities derive from distinguishing clearly what the program knows from how that knowledge will be used, making it possible to use the same knowledge in different ways
keywords	AI, knowledge base, systems, theory
series	CADline
last changed	1999/02/12 15:08

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	4418
authors	Franklin, Randolph, Wu, Peter, Y. F. and Samaddar, Sumitro (et al)
year	1986
title	Prolog and Geometry Projects
source	IEEE Computer Graphics and Applications. November, 1986. vol. 6: pp. 46-55 : ill. includes bibliography
summary	Prolog is a useful tool for geometry and graphics implementations because its primitives, such as unification, match the requirements of many geometric algorithms. During the last two years, programs have been implemented to solve several problems in Prolog, including a subset of the Graphical Kernel System, convex-hull calculation, planar graph traversal, recognition of groupings of objects, Boolean combinations of polygons using multiple precision rational numbers, and cartographic map overlay. Certain paradigms or standard forms of geometric programming in Prolog are becoming evident. They include applying a function to every element of a set, executing a procedure so long as a certain geometric pattern exists, and using unification to propagate a transitive function. This article describes the experiences, including paradigms of programming that seem useful, and finally lists those considered as the advantages and disadvantages of Prolog
keywords	geometric modeling, computer graphics, PROLOG, programming
series	CADline
last changed	2003/06/02 13:58

_id	c52d
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Guildford: Butterworth, 1986. pp. 107-119
summary	This paper introduces the concepts of knowledge engineering, a subset of artificial intelligence. It describes means of representing and manipulating non-numeric design knowledge using symbolic inference mechanisms. It then describes a subset of knowledge engineering--expert systems. Knowledge- based systems in computer-aided architectural design are presented as a new direction for CAAD which expands the role of the computer in design. Expert systems within a CAAD environment are discussed
keywords	AI, knowledge base, design, architecture, CAD, representation, expert systems
series	CADline
email
last changed	2003/06/02 13:58

_id	c898
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 107-119
summary	Computer-aided architectural design (CAAD) has come to mean a number of often disparate activities. These can be placed into one of two categories: using the computer as a drafting and, to a lesser extent, modelling system; and using it as a design medium. The distinction between the two categories is often blurred. Using the computer as a drafting and modelling tool relies on computing notions concerned with representing objects and structures numerically and with ideas of computer programs as procedural algorithms. Similar notions underly the use of computers as a design medium. We shall return to these later. Clearly, all computer programs contain knowledge, whether methodological knowledge about processes or knowledge about structural relationships in models or databases. However, this knowledge is so intertwined with the procedural representation within the program that it can no longer be seen or found. Architecture is concerned with much more than numerical descriptions of buildings. It is concerned with concepts, ideas, judgement and experience. All these appear to be outside the realm of traditional computing. Yet architects discoursing use models of buildings largely unrelated to either numerical descriptions or procedural representations. They make use of knowledge - about objects, events and processes - and make nonprocedural (declarative) statements that can only be described symbolically. The limits of traditional computing are the limits of traditional computer-aided design systems, namely, that it is unable directly to represent and manipulate declarative, nonalgorithmic, knowledge or to perform symbolic reasoning. Developments in artificial intelligence have opened up ways of increasing the applicability of computers by acquiring and representing knowledge in computable forms. These approaches supplement rather than supplant existing uses of computers. They begin to allow the explicit representations of human knowledge. The remainder of this chapter provides a brief introduction to this field and describes, through applications, its relevance to computer- aided architectural design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	e65f
authors	Haines, Eric A. and Greenberg, Donald P.
year	1986
title	The Light Buffer: A Shadow-Testing Accelerator
source	IEEE Computer Graphics and Applications. September, 1986. vol. 6: pp. 6-16 : col. ill. includes bibliography
summary	In one area of computer graphics, realistic image synthesis, the ultimate goal is to produce a picture indistinguishable from a photograph of a real environment. A particularly powerful technique for simulating light reflection - an important element in creating this realism - is called ray tracing. This method produces images of excellent quality, but suffers from lengthy computation time that limits its practical use. This article presents a new method to reduce shadow testing time during ray tracing. The technique involves generating light buffers, each of which partitions the environment with respect to an individual light source. These partition descriptions are then used during shadow testing to quickly determine a small subset of objects that may have to be tested for intersection. The results of timing tests illustrate the beneficial performance of these techniques. The tests compare the standard ray-tracing algorithm to light buffers of varying resolution
keywords	realism, synthesis, ray tracing, algorithms, computer graphics, shadowing
series	CADline
last changed	2003/06/02 13:58

_id	2b40
authors	Hanson, N.L.R. and Radford, Antony D.
year	1986
title	Living on the Edge : A Grammar For Some Country Houses by Glenn Murcutt
source	Architecture Australia. 1986. vol. 75: pp. 66-73
summary	Glenn Murcutt is an award-winning Australian architect whose work displays a consistent pattern of development in its response to the environment and brief. A set of syntactic and abductive rules is developed that models the generation of a subset of his work. The model and the architect's response to its operation is described
keywords	architecture, shape grammars, applications
series	CADline
last changed	2003/06/02 13:58

For more results click below: