Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 179

Reformat results as: short short into frame detailed detailed into frame

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	4ed0
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1986
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	xiv, 476 p. : ill. (some col.) Los Altos, California: Morgan Kaufmann Pub. Inc., 1986. Forewords by Pierre Bezier and Robin A. Forrest. Includes bibliography: p. 455-465 and index
summary	Discusses the use of splines from the point of view of the computer scientist concentrating on parametric spline curves and parametric,tensor-product spline surfaces
keywords	splines, theory, computer graphics, computational geometry
series	CADline
last changed	2003/06/02 14:42

_id	aa60
authors	Christiansson, Per
year	1986
title	Properties of Future Knowledge Based Systems : The Interactive Consultation System Example
source	computer Aided Architectural Design - Developments in Education and Practice. 1986. 14 p. : ill. includes bibliography
summary	An introduction to knowledge based systems is presented to point out possibilities and limitations of the new software and hardware technology now beginning to be available. A pilot study on the use of an expert system shell (the ES/P Advisor), is briefly discussed. A part of the Swedish concrete building code was implemented in the expert system shell to demonstrate the use of an interactive consultation system. Ideas on how compact video-discs can be used in this type of systems are also put forward
keywords	knowledge base, systems, expert systems, CAD, media
series	CADline
last changed	1999/02/12 15:07

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	c898
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 107-119
summary	Computer-aided architectural design (CAAD) has come to mean a number of often disparate activities. These can be placed into one of two categories: using the computer as a drafting and, to a lesser extent, modelling system; and using it as a design medium. The distinction between the two categories is often blurred. Using the computer as a drafting and modelling tool relies on computing notions concerned with representing objects and structures numerically and with ideas of computer programs as procedural algorithms. Similar notions underly the use of computers as a design medium. We shall return to these later. Clearly, all computer programs contain knowledge, whether methodological knowledge about processes or knowledge about structural relationships in models or databases. However, this knowledge is so intertwined with the procedural representation within the program that it can no longer be seen or found. Architecture is concerned with much more than numerical descriptions of buildings. It is concerned with concepts, ideas, judgement and experience. All these appear to be outside the realm of traditional computing. Yet architects discoursing use models of buildings largely unrelated to either numerical descriptions or procedural representations. They make use of knowledge - about objects, events and processes - and make nonprocedural (declarative) statements that can only be described symbolically. The limits of traditional computing are the limits of traditional computer-aided design systems, namely, that it is unable directly to represent and manipulate declarative, nonalgorithmic, knowledge or to perform symbolic reasoning. Developments in artificial intelligence have opened up ways of increasing the applicability of computers by acquiring and representing knowledge in computable forms. These approaches supplement rather than supplant existing uses of computers. They begin to allow the explicit representations of human knowledge. The remainder of this chapter provides a brief introduction to this field and describes, through applications, its relevance to computer- aided architectural design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c55f
authors	Kalay, Yehuda E.
year	1986
title	The Impact of CAD On Architectural Design Education in the United States
doi	https://doi.org/10.52842/conf.ecaade.1986.348
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 348-355
summary	Computer-Aided Design (CAD) began to appear in schools of architecture in the United States over 15 years ago. By 1982, over 50% of all accredited schools of architecture in North America included some form of CAD in their curricula. This number has continued to steadily increase. For the most part, the use of CAD has been restricted to the few individuals working on special "CAD projects" and to the researchers developing CAD products. The reasons for this limitation have included the low availability, difficulty of use, restricted access and high cost of the CAD systems, as well as limited faculty and administrative support. Recently, however, partly due to the introduction of micro- computer CAD software, and partly due to the growing awareness of the importance of CAD in architectural education and practice, some schools have begun to introduce CAD as part of the general design curriculum.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c3ca
authors	Rasdorf, William J. and Watson, Bruce R.
year	1986
title	ADI : An Adaptive Database Interface for Dynamic Databases
source	ASME Symposium Proceedings on Knowledge based Expert Systems for Manufacturing. Anaheim, CA: American Society of Mechanical Engineers, Production Engineering Division, December, 1986. pp. 119-130. CADLINE has abstract only
summary	The operation of a manufacturing organization often depends on its underlying design and manufacturing databases. In a manufacturing environment, many users, both individuals and application programs, must have access to one or more of the organization's databases to provide, use, or modify data, to control information flow, and to facilitate information management. Such databases routinely undergo dynamic changes in both their content and their structure. These changes commonly result from the design of new products, the introduction of new materials, and the introduction of new machines and processes on the shop floor. Such continuing changes must be reflected in the database schemas and subsequently require that application programs be updated and that online users be educated on a continuous basis. The problem addressed in this paper is that it is difficult for users and application programs to get the information that they need, when they need it, from the multiple heterogeneous database management system (DBMS) environments that have evolved in design and manufacturing organizations. The solution proposed here is to build a general, extendable interface between database users and the many sources of data available to them. This in itself is not a new suggestion; a number of researchers have addressed portions of this problem. In general, the interfaces that they have developed to date are best suited to environments where the structure of the database is static and does not change over time. One of the things that this paper proposes that is different from existing work is an interface which handles the dynamic restructuring nature of manufacturing databases, enabling a user to obtain the most accurate and up to date information as the structure and content of the underlying databases change. Another unique aspect of the DBMS interface proposed herein is that the interface attempts to capture the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact identity of the required entities that are stored in the database
keywords	engineering, database, manufacturing, user interface
series	CADline
last changed	2003/06/02 10:24

_id	a771
authors	Roth, J., Hashimshony, R. and Ishai, E.
year	1986
title	Using the Computer as a Teaching Aid for Architecture Students - Some Examples
doi	https://doi.org/10.52842/conf.ecaade.1986.127
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 127-135
summary	The use of computers has become part of the regular curriculum in many schools of Architecture in the last few years. In addition to specific courses related to basic computer knowledge (e.g.: programming), the computer's main application is in the design studio for evaluating alternatives (e.g.: GOAL, GABLE), or as a drafting aid (e.g.: BIBLE AUTOCAD, ARC+). We believe that using the computer as a regular part of the teaching in all the courses is of great importance. In this paper we present three examples in which the computer was used as a teaching aid in courses not related to the design studio: "Morphology" and "Introduction to lnterior Design".
series	eCAADe
last changed	2022/06/07 07:56

_id	6cfe
authors	Wagter, H.
year	1986
title	A New Generation Needs New Tools (A Proposal for a Joint Effort)
doi	https://doi.org/10.52842/conf.ecaade.1986.323
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 323-327
summary	After an introduction describing the present situation on computer- programs used in learning environments, some remarks are made on what future programs should look like. Although the design and the building process are both extremely complex, a proposal is made to carry out a project in a joint effort among ECAADE members to achieve a new generation of learning tools. These tools should also be of good service in a consulting environment.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	6353
authors	Raibert, Marc H.
year	1986
title	Symmetry in Running
source	Science. March, 1986. vol. 231: pp. 1292-1294 : ill. includes bibliography
summary	Symmetry plays a key role in simplifying the control of legged robots and in giving them the ability to run and balance. The symmetries studied describe motion of the body and legs in terms of even and odd functions of time. A legged system running with these symmetries travels with a fixed forward speed and a stable upright posture. The symmetries used for controlling legged robots may help in elucidating the legged behavior of animals. Measurements of running in the cat and human show that the feet and body sometimes move as predicted by the even and odd symmetry functions
keywords	symmetry, robotics, animation
series	CADline
last changed	2003/06/02 10:24

_id	4d8b
authors	Wright, Paul K.
year	1986
title	A Manufacturing Hand
source	pp. 13- 23 : ill Pittsburgh, PA: Engineering Design Research Center, CMU, September, 1986. includes bibliography.
summary	In unmanned Flexible Manufacturing Cells, robots can be used for loading machines, inspection activities, and assembly operations. What kind of robotic end-effector should be built for such tasks? The human hand has evolved to be a general purpose manipulator that adapts to the richness of our daily lives but, in doing so, it is not particularly suited to manufacturing operations. Here, special tools, fixtures, and protective layers are heavily relied on. This paper describes the initial development of a hand specifically for manufacturing work. This has involved the manufacture of an instrumented wrist with an adjustable remote center of compliance, and the design of fingers for gripping. Object shapes have also been analyzed in order to provide for a stable static grip. Importantly, these studies of the physical aspects of prehension have been matched to tasks. The research has considered a range of industrial operations and specified the level of end-effector control needed. This work is leading to some design guides for robotic end-effectors which, it is hoped, will be of use to industrial designers
keywords	robotics, CAD, CAM, CAE, automation, manufacturing
series	CADline
last changed	2003/06/02 13:58

_id	4c79
authors	Aguilar, Lorenzo
year	1986
title	A Format for a Graphical Communications Protocol
source	IEEE Computer Graphics and Applications vol. 6.no. 3 (March, 1986): pp. 52-62
summary	This article describes the requirements for a graphical format on which a graphical on-line communications protocol can be based. It is argued that on-line graphical communications is similar to graphical session capture, and thus the author proposes an interactive graphical communications format using the GKSM session metafile. The discussion includes items that complement the GKSM metafile such as a format for on-line interactive exchange. One key application area of such a format is multimedia on-line conferencing. Therefore, a conferencing software architecture for processing the proposed format is presented. This format specification is made available to those planning multimedia conferencing systems
keywords	user interface, communication, computer graphics, multimedia, standards
series	CADline
last changed	1999/02/12 15:07

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	2ec8
authors	Arditi, Aries and Gillman, Arthur E.
year	1986
title	Computing for the Blind User
source	BYTE Publication Inc. March, 1986. pp. 199-208. includes some reference notes
summary	In this article the authors present some of the human-factors issues specific to non visual personal computing. The authors' concern is with the accuracy, speed, and generality of the blind-user interface, to make computers more accessible and efficient for blind and visually impaired persons
keywords	user interface, disabilities
series	CADline
last changed	2003/06/02 13:58

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6c8e
authors	Barbera, Salvatore and Correnti, Gabriele
year	1986
title	Reticular and Linear Planning of Erecting Yards Aided by Personal Computer
doi	https://doi.org/10.52842/conf.ecaade.1986.157
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 157-166
summary	This study has been carried out during the Course of Ergotecnica Edile hold at the Instituto Dipartimentale di Architettura e Urbanistica of Catania University, and it has been addressed to the students of the Faculty of Civil Engineering (manufacturing and direction of civil works). The present study aims at instructing the students as refers to planning, through computers, erecting yards. Work-planning is specifically important with reference both to the starting program and to the carrying on of the work. Within this context, workplanning is useful as regard the control and contingent correction of the work. In the latter case, divergencies between work-evolution and forecast are of primary value.
series	eCAADe
last changed	2022/06/07 07:54

For more results click below: