Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 211

Reformat results as: short short into frame detailed detailed into frame

_id	7f64
authors	Harfmann, A.C., Swerdloff, L.M. and Kalay, Y.E.
year	1986
title	The Terminal Crit
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 79-87
doi	https://doi.org/10.52842/conf.acadia.1986.079
summary	Numerous attempts have been made to develop formal design methods with -the purpose of increasing the predictability, consistency and dissemination of the design process and improving the quality of the objects produced. The ill- structured nature of design, and the perception of design activities as intuitive and experience dependent have frustrated many of the efforts to structure these process. The growing complexity of the built environment and advances in technology have led to a more rigorous effort to understand and externalize creative activities. Computer aided design tools have recently been playing an important role in the evolution of the design process as a rationally defined activity. The use of- computers for drafting, analysis, and 2 or 3 dimensional modeling is rapidly becoming an accepted method in many design schools and practitioners. A next logical step in the externalization of the design process is to endow the computer with the ability to manipulate and critique parts of the design. Under this scenario, the "terminal crit" is redefined to mean critiques that are carried out by both the designer and the computer. The paper presents the rationalization of the design process as a continuum into which CAD has been introduced. The effects of computers on the design process are studied through a specific incorporation of CAD tools into a conventional design studio, and a research project intended to advance the role of CAD in design.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ab08
authors	Samad, Tariq
year	1986
title	A Natural Language Interface for Computer-Aided Design
source	ix, 188 p. Boston: Kluwer Academic Publishers, 1986. includes bibliography: p. [174]-184 and index. -- (Kluwer International Series in Engineering and Computer Science)
summary	A description of CLEOPATRA, a natural language interface for a particular sub-domain of computer aided design--circuit simulation post processing. The language is based on an approach to natural language understanding that supplements a case frame parser with a few novel features that give the approach more generality and power than pervious approaches without sacrificing the intuitive appeal of case-frame semantics
keywords	CAD, natural languages, user interface, integrated circuits
series	CADline
last changed	1999/02/12 15:09

_id	f3aa
authors	Tyler, Sherman William
year	1986
title	SAUCI. Self-Adaptive User Computer Interfaces
source	Carnegie Mellon University,Pittsburgh
summary	Different approaches to the design of the human-computer interface have been taken in the past. These can be organized into four broad categories: tack-on; intuitive/empirical; formal; and conversational. There are several important interface design criteria that have never been adequately attained in any of these approaches. One is modularity, that is, maintaining a clear separation between the interface and its target system. A second criterion is self-adaptation, or the ability of the interface to modify its own behavior to suit a given individual user. Two further criteria relate to the interface's potential to guide users in performing typical high-level tasks on the target system and to provide intelligent advice on the use of that system. This research was focused on developing an integrated technique for achieving these four design criteria. To that end, an abstract architecture called SAUCI, or the Self-Adaptive User-Computer Interface, was proposed, embodying a knowledge-based, object-oriented approach to interface design. The foundation of this approach rests upon information encoded within sets of objects. This information includes separate knowledge bases describing the individual users, the commands of the target system, and the high-level tasks appropriate for that system. The behavior of the interface is controlled by various methods which call upon the knowledge bases in a rule-governed manner to decide what interface features should be present at each phase of the user's dialogue with the target system. To test the feasibility of the proposed architecture, a working interface was implemented on a Xerox 1108 computer in the LOOPS language, with a UNIX operating system running on a separate minicomputer as the target system. An empirical evaluation of this prototype revealed clear advantages over the standard interface. Closer examination pointed to each of the factors of modularity, task guidance, and user-tailored assistance as playing a significant role in these effects. A discussion of additional applications of this architecture and of areas for future development is offered as further evidence of the value of this approach as a general framework for human-computer interface design.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	4577
authors	Piegl, L.
year	1986
title	Representation of Rational Bezier Curves and Surfaces by Recursive Algorithms
source	Computer Aided Design Butterworth & Co. (publishers) Ltd., September, 1986. vol. 18: pp. 361-366 : ill.
summary	includes a short bibliography. Recursive algorithms for the computation and subdivision of rational Bezier curves and surfaces are presented. The development uses the relationship between the R4 geometry and the rational scheme
keywords	curves, curved surfaces, recursion, Bezier, representation
series	CADline
last changed	2003/06/02 13:58

_id	e72a
authors	Putnam, L.K. and Subrahmanyam, P.A.
year	1986
title	Boolean Operations on n- Dimensional Objects
source	IEEE Computer Graphics and Applications. June, 1986. vol. 6: pp. 43-51 : ill. includes bibliography
summary	Computation of the union, intersection, and difference of n- dimensional objects plays a central role in several computer- aided geometric design problems. An algorithm for computing these operations that uses a boundary classification technique is presented here. The algorithm is recursive in structure, with the recursion being on the dimensions of objects dealt with at each stage. The representation treats all entities as objects, making no distinction between faces, edges or vertices. The objects produced are 'regularized,' that is, there are no degenerate boundaries such as dangling edges. The sample application given involved hidden-surface removal
keywords	algorithms, recursion, hidden surfaces, boolean operations, B-rep,geometric modeling
series	CADline
last changed	2003/06/02 13:58

_id	81ae
authors	Rasdorf, William J. and Parks, Linda M.
year	1986
title	Expert Systems and Engineering Design Knowledge
source	Electronic Computation Conference Proceedings (9th : 1986 : Birmingham, AL) American Society of Civil Engineers, pp. 28-42. CADLINE has abstract only.
summary	Of all the contributions of artificial intelligence (AI), expert systems show some of the most significant promise for engineering applications. An expert system provides a framework for acquiring, representing, and using knowledge about a particular application's domain. The role of knowledge in engineering design merits closer attention so that AI-oriented computer-aided engineering (CAE) systems can be developed and maintained systematically. Because 'knowledge' in engineering applications is loosely defined, it is necessary to identify knowledge types and the correlations between them before widespread engineering design applications can be achieved. The types of domain knowledge; facts, procedures, judgments, and control; differ from the classes of that knowledge; creative, innovative, and routine. Feasible engineering tasks for expert systems can be determined based on these types and classes of knowledge. Prototype expert systems have been developed for civil engineering applications to assist with interpretation, design, planning, diagnosis, control, and other engineering system functions. A number of these are described herein. Interpretive tasks require reasoning about a task in light of the knowledge available, while generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select an appropriate knowledge-engineering tool for the domain being considered. The critical features to be weighed after problem classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations. After considering all of these factors in the selection of the expert system took, the engineer can then proceed with the acquisition of knowledge and the construction and use of the expert system
keywords	design, knowledge, civil engineering, expert systems
series	CADline
last changed	2003/06/02 13:58

_id	cf75
authors	Robertson, Philip K. and O'Callaghan, John F.
year	1986
title	The Generation of Color Sequences for Univariate and Bivariate Mapping
source	IEEE Computer Graphics and Applications. February, 1986. vol. 6: pp. 24-32 : ill. some col. includes bibliography
summary	Recent technological advances have made it feasible to produce full color statistical maps on computer-controlled display systems. This has caused an appraisal of the use of color to represent statistical variables, and the development of a theoretical structure for the choice of suitable univariate and bivariate map coloring schemes. Realization of such schemes in an intuitive and controlled way is important to the comprehension of statistical variables from maps. Therefore, a method of generating specific color sequences within the framework of a uniform color space, allowing for the intuitive specification of color sequences and for their realization on various display systems, is presented
keywords	mapping, color, display
series	CADline
last changed	2003/06/02 13:58

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
doi	https://doi.org/10.52842/conf.ecaade.1986.167
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
doi	https://doi.org/10.52842/conf.acadia.1986.037
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	e43b
authors	Blasi, D. and Scudo, G.
year	1986
title	Experience of Output Visualisation in Thermal Performance Analysis and Design.
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 186-191
doi	https://doi.org/10.52842/conf.ecaade.1986.186
summary	GKS didactic application in output visualisation of thermal behaviour simulation in building analysis and design. Energy analysis is performed by BEETA (Built Environment Energy Test and Analysis) code. It is a numerical simulation code which allows to simulate the building multizone thermal behaviour with different passive devices (Direct Gain, Greenhouse, Solar Chimney, Trompe, Convective and Radiative Cooling etc.). The code is based on thermal network theory and methods; the set of thermal equation is normally solved every hour or less by the coefficient matrix inversion method. An interactive loop is provide for dealing with non- linear thermal conductance problems with continuous or step variation (i.e. air mixing through an opening between two spaces, Trompe wall convective loop, etc.) The code allows to take into account urban obstructions and shading devices.
series	eCAADe
last changed	2022/06/07 07:52

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	2eb1
authors	Bridges, Alan H.
year	1986
title	Alternative Approaches Towards the Teaching of Computer Aided Architectural Design
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.1986.331
summary	The problems of architectural education in general and CAD education in particular are discussed. The paper suggests that the computing requirements of architectural practice are different to those of architectural education and that much of the software used in schools of architecture is not used in an educationally structured way. A number of proposals for the educational use of computers are made, together with recommendations for a common computing environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c211
authors	Brown, A.G.P.
year	1986
title	A Year's Experience with CATIA and CADAM
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 7-16
doi	https://doi.org/10.52842/conf.ecaade.1986.007
summary	In June 1985 Liverpool University obtained the CAD packages CATIA and CADAM to run on its IBM 4341 mainframe. The following is a brief description of the investigations which have taken place in the first year of their implementation to gauge the usefulness of these packages, principalLy as CAAD teaching aids. Neither CATIA nor CADAM were initially developed as architectural design aids so a matter of initial concern was their appropriateness for teaching (and possibly research) in an architectural environment.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: