Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 209

Reformat results as: short short into frame detailed detailed into frame

_id	a661
authors	Cajati, Claudio and Calandro, Lucia
year	1986
title	Architectural analysis of buildings in order to choice new functional destinations: an application of computer graphics for Faculty of Architecture's students
doi	https://doi.org/10.52842/conf.ecaade.1986.017
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 17-19
summary	The research tries to give a little but meaningful answer to the specific context of the Faculty of Architecture of Naples. Such a context presents a delay of teachers and researchers, in their teaching and researching activity, in beginning the CAAD way. Often the delay is due to a wrong attitude: a too high or too low expectation towards the use of the computer. In such a situation, the chief target of the research is the student of architecture. It is possible and useful to address a clear message, by a simple educational material, just to the student of architecture; not necessarily by producing a software or modifying some existing one, but also applying a given available software to an important architectural question.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4431
authors	Calderaro, V. and Platone, C.
year	1986
title	Information systems and internvention technologies programmed to aid the energy saving within the limits of the existing building property rescue
doi	https://doi.org/10.52842/conf.ecaade.1986.192
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 192-201
summary	In our national territory the rescue of the existing building property is a very important problem. For that reason, starting front the presupposition that the existing buildings, restoration finds its real achievement by means of technological and installing interventions strictly connected with the energy costs and consumptions, this study sets as a planning method on various degrees to analyze, single out and propose the possible solutions based on qualitative and quantitative researches into the thermo-physical behaviour of the above-mentioned buildings. From a research done into the principal building properties related with the different national areas we can single out significant morphological samples and typical technological structures. This first analytical study allows the singling out of significant building models on which it's possible to value the thermal behaviour and possible subsequent restoring interventions by applying computerized mathematical models or by operating diagrams deduced from them. First of all, these mathematical models for simulation allow a valuation of the main thermal parameters (dispersion both in absolute value and in volumetric factor, medium thermal transmittance (U value) of geometrical models deduced from the typical above - mentioned cases.
series	eCAADe
last changed	2022/06/07 07:54

_id	eb6e
authors	Gero, John S.
year	1986
title	Knowledge-Based Design Systems in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1986.x.h1l
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, p. 243
summary	This paper describes continuing research in the Architectural Computing Unit of the University of Sydney on the development of knowledge-based design systems in architecture. It is broken into three parts: (i) antecedents - how did we get here? (ii) the present - where are we? (iii) a future - where might we go from here?
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e799
authors	Howes, Jaki
year	1986
title	Computer Education in Schools of Architecture and the Needs of Practice
doi	https://doi.org/10.52842/conf.ecaade.1986.045
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 45-48
summary	In April 1985 there was a meeting (at Huddersfield Polytechnic) or representatives from 26 Schools of Architecture. At this, concern was expressed about the lack of direction from the RIBA with regard to the appropriate level of computer teaching on architectural courses. In addition, it was felt that it was essential that at least one member of a Visiting Board panel should be computer literate and in a position to give advice. These points were raised at the RIBA Computer Committee later in 1985, and the committee's attention was also drawn to comments contained in the report by HM Inspector on Public Sector Education in Architecture (1985) based on investigations made during 1984.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a230
authors	Stazi, A., Munafo, P. and Giampieri, O.
year	1986
title	Proceedings Relative to a Quick Determination of Thermal Performances of Passive Solar Systems
doi	https://doi.org/10.52842/conf.ecaade.1986.305
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 305-322
summary	In the following report it's reported on a research still going on, which aims at establishing easy to use computing methods to allow to quickly compute the thermal loads at first stage of approximation and the performances of the most significant solar systems, which can be applied private. The research is developing through three steps. In the first step the research team recognised the most and housings occurring in residence building. In the second step, also with regard to the outcomes of the theoretical reference model has been loads and the performances of the passive solar systems have been computed for, when varying a few parameters regarding building typology, alignment of the body of the building, flats layout, walls shape, and so on. In the third step the interval range, where the model can fit into, and the correcting coefficients are set through theoretical and experimental tests.
series	eCAADe
last changed	2022/06/07 07:56

_id	68ef
authors	Tweed, Christopher
year	1986
title	A Computing Environment for CAAD Education
doi	https://doi.org/10.52842/conf.ecaade.1986.136
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 136-145
summary	This paper describes a modelling system, MOLE (Modelling Objects with Logic Expressions), and its use as a computing environment for teaching architectural undergraduates. The paper also sketches the background to MOLE's development as a medium for research, and identifies benefits conferred on research and teaching through their common interest in MOLE. Teaching at EdCAAD is conducted in what is chiefly a research milieu. Hence our teaching methods exploit the products and experience of research. But the partnership is mutually rewarding, because teaching informs future research efforts through the experience gained from using MOLE. At present, our teaching concentrates on a ten-week elective course for fourth year architectural undergraduates. The main component of the course requires each student to program a simple application related to architectural design. Applications normally require a programming language with access to graphics routines, and in previous years we have used C or, more recently, Prolog with their graphics extensions. For the past two years MOLE has fulfilled this need. The paper begins by explaining the evolution of our approach to CAAD, leading to the development of the description system, MOLE. Section two outlines the main features of the version of MOLE which has been extended to provide a comprehensive computing environment for programming simple architectural applications. MOLE in use is the subject of section three which is illustrated with examples drawn from students' coursework projects and exercises. This is followed by a discussion of the lessons learned from teaching which highlight areas of MOLE's development that need more study. A concluding section summarises what has been learned, and poses vital questions that require answers before we can expect widespread acceptance of CAAD in practice.
series	eCAADe
last changed	2022/06/07 07:58

_id	69c7
authors	Woodbury, Robert F.
year	1986
title	VEGA : A Geometric Modelling System
source	11 p. : ill. Engineering Design Research Center, CMU, April 1986. DRC-48-03-87. includes bibliography
summary	VEGA is a program which models rigid solid objects in three dimensions. Specifically, its domain is assemblies of planar faced polyhedra. VEGA supports a variety of operations to create, modify, query and delete these assemblies. VEGA is intended to serve two purposes: that of a new medium of representation for the design process; and of a programming package to support geometric applications in a wide variety of domains. Here the author addresses primarily the first of these purposes, that of a new medium for design. Designers of physical objects use an external medium, traditionally paper or physical models, not only to record their work, but to provide information which assists in the understanding of implications of design decisions. Designers proceed by performing operations, which reflect internal design decisions, on this external medium. The operations used in design are generally reflective of these physical media. For example, models built of clay tend to be formed by a subtractive processes, whereas models built of wood tend to be additive in nature. Designers who use drawings as their medium still tend to use operations which reflect operations on physical models. Computers provide the fascinating potential to provide a much wider variety of operations at a much greater speed than is available with the traditional means of representation. In addition, a computer based representation can provide quantitative information not easily accessible from traditional forms. This opens the potential for the inclusion of formal means of evaluation in the design process; something which is generally almost absent in traditional design teaching. A computer program which effectively and 'naturally' models physical objects and operations on them would be a valuable assistance to both the teaching and practice design. VEGA has been designed with these objectives in mind. VEGA represents physical objects with a scheme known as boundary representation and provides a wide variety of operations on these objects. VEGA also provides means to associate other, non-geometric, information with the objects it represents. VEGA is implemented under the ANDREW system. It communicates to ANDREW through a graphics package, also developed by the author's group. VEGA is intended to serve as a medium for future studio courses in the Architecture, Industrial Design and Arts education
keywords	geometric modeling, solid modeling, CAD, education, assemblies, B-rep, systems
series	CADline
email
last changed	2003/06/02 10:24

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	ed51
authors	Bergeron, Philippe
year	1986
title	A General Version of Crow's Shadow Volumes
source	IEEE Computer Graphics and Applications September, 1986. vol. 6: pp. 17-28 : col. ill. includes bibliography.
summary	In 1977 Frank Crow introduced a new class of algorithms for the generation of shadows. His technique, based on the concept of shadow volumes, assumes a polygonal database and a constrained environment. For example, polyhedrons must be closed, and polygons must be planar. This article presents a new version of Crow's algorithm, developed at the Universite de Montreal, which attempts a less constrained environment. The method has allowed the handling of both open and closed models and nonplanar polygons with the viewpoint anywhere, including any shadow volume. It does not, however, sacrifice the essential features of Crow's original version: penetration between polygons is allowed, and any number of light sources can be defined anywhere in 3D space, including the view volume and any shadow volume. The method has been used successfully in the film Tony de Peltrie and is easily incorporated into an existing scan-line, hidden-surface algorithm
keywords	algorithms, shadowing, polygons, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	4361
authors	Bishop, G. and Weimer, D.M.
year	1986
title	Fast Phong Shading
source	Computer Graphics (20) 4 pp. 103-106
summary	Computer image generation systems often represent curved surfaces as a mesh of polygons that are shaded to restore a smooth appearance. Phong shading is a well known algorithm for producing a realistic shading but it has not been used by real-time systems because of the 3 additions, 1 division and 1 square root required per pixel for its evaluation. We describe a new formulation for Phong shading that reduces the amount of computation per pixel to only 2 additions for simple Lambertian reflection and 5 additions and 1 memory reference for Phong's complete reflection model. We also show how to extend our method to compute the specular component with the eye at a finite distance from the scene rather than at infinity as is usually assumed. The method can be implemented in hardware for real-time applications or in software to speed image generation for almost any system.
series	journal paper
last changed	2003/11/21 15:16

_id	a6f1
authors	Bridges, A.H.
year	1986
title	Any Progress in Systematic Design?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 5-15
summary	In order to discuss this question it is necessary to reflect awhile on design methods in general. The usual categorization discusses 'generations' of design methods, but Levy (1981) proposes an alternative approach. He identifies five paradigm shifts during the course of the twentieth century which have influenced design methods debate. The first paradigm shift was achieved by 1920, when concern with industrial arts could be seen to have replaced concern with craftsmanship. The second shift, occurring in the early 1930s, resulted in the conception of a design profession. The third happened in the 1950s, when the design methods debate emerged; the fourth took place around 1970 and saw the establishment of 'design research'. Now, in the 1980s, we are going through the fifth paradigm shift, associated with the adoption of a holistic approach to design theory and with the emergence of the concept of design ideology. A major point in Levy's paper was the observation that most of these paradigm shifts were associated with radical social reforms or political upheavals. For instance, we may associate concern about public participation with the 1970s shift and the possible use (or misuse) of knowledge, information and power with the 1980s shift. What has emerged, however, from the work of colleagues engaged since the 1970s in attempting to underpin the practice of design with a coherent body of design theory is increasing evidence of the fundamental nature of a person's engagement with the design activity. This includes evidence of the existence of two distinctive modes of thought, one of which can be described as cognitive modelling and the other which can be described as rational thinking. Cognitive modelling is imagining, seeing in the mind's eye. Rational thinking is linguistic thinking, engaging in a form of internal debate. Cognitive modelling is externalized through action, and through the construction of external representations, especially drawings. Rational thinking is externalized through verbal language and, more formally, through mathematical and scientific notations. Cognitive modelling is analogic, presentational, holistic, integrative and based upon pattern recognition and pattern manipulation. Rational thinking is digital, sequential, analytical, explicatory and based upon categorization and logical inference. There is some relationship between the evidence for two distinctive modes of thought and the evidence of specialization in cerebral hemispheres (Cross, 1984). Design methods have tended to focus upon the rational aspects of design and have, therefore, neglected the cognitive aspects. By recognizing that there are peculiar 'designerly' ways of thinking combining both types of thought process used to perceive, construct and comprehend design representations mentally and then transform them into an external manifestation current work in design theory is promising at last to have some relevance to design practice.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c211
authors	Brown, A.G.P.
year	1986
title	A Year's Experience with CATIA and CADAM
doi	https://doi.org/10.52842/conf.ecaade.1986.007
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 7-16
summary	In June 1985 Liverpool University obtained the CAD packages CATIA and CADAM to run on its IBM 4341 mainframe. The following is a brief description of the investigations which have taken place in the first year of their implementation to gauge the usefulness of these packages, principalLy as CAAD teaching aids. Neither CATIA nor CADAM were initially developed as architectural design aids so a matter of initial concern was their appropriateness for teaching (and possibly research) in an architectural environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	63d0
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Constraint-bounded design search
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 146-157
summary	The design process requires continual checking of the consistency of design choices against given sets of goals that have been fulfilled. Such a check is generally performed by comparing abstract representations of design goals with these of the sought real building objects (RBO) resulting from complex intellectual activities closely related to the designer's culture and to the environment in which he operates. In this chapter we define a possible formalization of such representations concerning the goals and the RBO that are usually considered in the architectural design process by our culture in our environment. The representation of design goals is performed by expressing their objective aspects (requirements) and by defining their allowable values (performance specifications). The resulting system of requirements defines the set of allowable solutions and infers an abstract representation of the sought building objects (BO) that consists of the set of characteristics (attributes and relations) which are considered relevant to represent the particular kind of RBO with respect to the consistency check with design goals. The values related to such characteristics define the performances of the RBO while their set establishes its behaviour. Generally speaking, there is no single real object corresponding to an abstract representation but the whole class of the RBO that are equivalent with respect to the values assumed by the considered characteristics. The more we increase the number of these, as well as their specifications, the smaller the class becomes until it coincides with a single real object - given that the assessed specifications be fully consistent. On the other hand, the corresponding representation evolves to the total prefiguration of the RBO. It is not therefore possible to completely define a BO representation in advance since this is inferred by the considered goals and is itself a result of the design process. What can only be established in advance is that any set of characteristics assumed to represent any RBO consists of hierarchic, topological, geometrical and functional relations among the parts of the object at any level of aggregation (from components to space units, to building units, to the whole building) that we define representation structure (RS). Consequently the RS may be thought as the elementary structures that, by superposition and interaction, set up the abstract representation that best fit with design goals.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	a9b1
authors	Cohen, M.F., Greenberg, D.P. and Immel, D.S. (et al)
year	1986
title	An Efficient Radiosity Approach for Realistic Image Synthesis
source	IEEE Computer Graphics and Applications March, 1986. vol. 6: pp. 26-35 : col. ill. includes bibliography.
summary	The radiosity method models the interaction of light between diffusely reflecting surfaces and accurately predicts the global illumination effects. Procedures are now available to simulate complex environments including occluded and textured surfaces. For accurate rendering, the environment must be discretized into a fine mesh, particularly in areas of high intensity gradients. The interdependence between surfaces implies solution techniques which are computationally intractable. This article describes new procedures to predict the global illumination function without excessive computational expense. Statistics indicate the enormous potential of this approach for realistic image synthesis, particularly for dynamic images of static environments
keywords	computer graphics, radiosity, rendering, algorithms
series	CADline
last changed	2003/06/02 14:42

_id	8503
authors	Coyne, Richard D. and Gero, John S.
year	1986
title	Semantics and the Organisation of Knowledge in Design
source	Design Computing. 1986. vol. 1: pp. 68-89 : ill. includes bibliography
summary	The linguistic paradigm of design is considered. The idea of meta-languages is developed as a means of generating designs that are imbued with semantic content. The formulation of meta-languages therefore becomes a way of organizing knowledge about design. The usefulness of these ideas is demonstrated by means of programs developed in Prolog
keywords	design, knowledge, semantics
series	CADline
email
last changed	2003/05/17 10:17

_id	ecc2
authors	Gero, John S. and Balachandran, M. B.
year	1986
title	Knowledge and Design Decision Processes
source	Berlin: Springer-Verlag, 1986. pp. 343- 352
summary	This paper describes how knowledge engineering techniques can be employed within optimization design decision processes. It commences with a brief discussion about multicriteria design optimization prior to elaborating the use of knowledge within this decision process. Four areas are briefly described-- knowledge as a control mechanism in the generation of the Pareto optimal set, knowledge needed to select alternate generation processes, knowledge which can be induced from the Pareto optimal set, and knowledge needed to recognize optimization models. A system which implements these concepts is presented
keywords	design process, knowledge, representation, optimization, decision making, multicriteria
series	CADline
email
last changed	2003/06/02 10:24

_id	8237
authors	Gero, John S. and Coyne, Richard D.
year	1986
title	Developments in Expert Systems for Design Synthesis
source	New York: 1986. pp. 193-203
summary	The applicability of expert systems to design synthesis is demonstrated. This is achieved by means of inference rules which can interpret design specifications in order to produce designs. This approach is applicable to certain classes of design problems which can be subdivided into independent subproblems. An expert system which contains knowledge about conflict resolution applicable to the more general class of design problem is demonstrated
keywords	design, expert systems, synthesis
series	CADline
email
last changed	2003/05/17 10:17

_id	40fe
authors	Gero, John S., Oxman, Rivka E. and Manago, C.
year	1986
title	Graphics and Expert Systems
source	AUSGRAPH '86 Australian Conference on Computer Graphics (4th : 1986 : Sydney). pp. 25-29 : ill. includes bibliography
summary	Expert systems are a novel software technology which aim to model the behavior and knowledge of human experts. This paper presents two modes of interaction between graphics and expert systems in the domain of computer-aided design. The first concerns the interaction between an expert system and commercial CAD systems. The second demonstrates how expert systems can control design oriented graphical representations. Examples from both modes are presented from systems developed at Sydney University
keywords	computer graphics, expert systems, CAD, architecture
series	CADline
email
last changed	2003/06/02 10:24

For more results click below: