Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 213

Reformat results as: short short into frame detailed detailed into frame

_id	a7de
authors	Bic, Lubomir and Jonathan P. Gilbert
year	1986
title	Learning from AI : New Trends in Database Technology
source	IEEE Computer. March, 1986. vol. 19: pp. 44-54. includes bibliography
summary	With the steadily increasing demand for user-oriented systems, new trends in database technology have evolved outside of the scope of the traditional data models. The authors are concentrated in this article on two closely related efforts: The incorporation of more semantic modeling capabilities into database models, and the development of better user environment, which include user friendly interfaces and support different user views of the content and organization of the data
keywords	AI, user interface, database, relational database
series	CADline
last changed	1999/02/12 15:07

_id	aa60
authors	Christiansson, Per
year	1986
title	Properties of Future Knowledge Based Systems : The Interactive Consultation System Example
source	computer Aided Architectural Design - Developments in Education and Practice. 1986. 14 p. : ill. includes bibliography
summary	An introduction to knowledge based systems is presented to point out possibilities and limitations of the new software and hardware technology now beginning to be available. A pilot study on the use of an expert system shell (the ES/P Advisor), is briefly discussed. A part of the Swedish concrete building code was implemented in the expert system shell to demonstrate the use of an interactive consultation system. Ideas on how compact video-discs can be used in this type of systems are also put forward
keywords	knowledge base, systems, expert systems, CAD, media
series	CADline
last changed	1999/02/12 15:07

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	6960
authors	Langendorf, Richard
year	1986
title	Alternative Models of Architectural Practice: The Impact of Computers -- 1990 and 2000
doi	https://doi.org/10.52842/conf.acadia.1986.007
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 7-27
summary	Though many architectural firms have only recently begun to use computers, and most firms still do not use computers for design, it is likely that by the turn of the century computers will have transformed architectural practice. First this paper assesses the likelihood of change by examining the potential use of computers in architectural practice, summarizing technology forecasts for computer hardware, software, and standards. -However, because there is an opportunity, architectural firms will not necessarily computerize. Next is a brief review of impediments to change and the process of organizational adaptation of new technology. Finally, the paper concludes with a number of forecasts in architectural practice in 1990 and 2000. A variety of professional practice options are defined, with the suggestion that there will be increasing experimentation and diversity within the profession. Finally, the implications of these changes are explored for architectural education.
series	ACADIA
last changed	2022/06/07 07:52

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	4f56
authors	Paasi, Jyrki
year	1986
title	Architectural Space Synthesizer - The last link of a CAAD system
doi	https://doi.org/10.52842/conf.acadia.1986.217
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 217-223
summary	Computer technology and CAD are about to change radically the thousands of years of tradition of the architect's work. We are leaving behind the old method of drawing by hand, replacing the pencil with a stylus for pointing elements of mathematical models of projects. We are changing over from two dimensional to three dimensional design. Decisive for the architect to achieve a successful outcome has always been and will always be the visualisation of the project right from its early stages. There is a trend -in our time and a risk in the. new technology of fragmenting our work and making it more abstract. The new technology is based on the old one and in the beginning its user still has the habits of the old. Therefore the visualisation in present CAD systems and three dimensional design is based on the old plane projections; axonometrics and perspectives. However, there is an essentially better way which happens also to be natural to the new technology and simple to realize using it. This is the spherical projection.
series	ACADIA
last changed	2022/06/07 07:58

_id	6075
authors	Paasi, Jyrki
year	1986
title	The space synthesizer of Helsinki University of Technology
doi	https://doi.org/10.52842/conf.ecaade.1986.253
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 253-257
summary	Computer technology and CAD are about to change radically the thousands of years of tradition of the architect's work. We are leaving behind the old method of drawing by hand, replacing the pencil with a stylus for pointing elements of mathematical models of projects. We are changing over from two dimensional to three dimensional design. Decisive for the architect to achieve a successful outcome has always been and will always be the visualisation of the project right from its early stages. There is a trend in our time and a risk in the new technology of fragmenting our work and making it more abstract. The new technology is based on the old one and in the beginning its user still has the habits of the old. Therefore the visualisation in present CAD systems and three dimensional design is based on the old plan projections; axonometrics and perspectives. However, there is an essentially better way which happens also to be natural to the new technology and simple to realize using it. This is the spherical projection.
series	eCAADe
last changed	2022/06/07 07:58

_id	095b
authors	Wagter, Harry
year	1986
title	Stimulating Creativity by Using Computers
doi	https://doi.org/10.52842/conf.acadia.1986.149
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 149-155
summary	Discussions that cope with the relation between computers and creativity often turn out to be very sensitive. It seems that this aspect of computer technology makes people feel uneasy. This can easily be understood. Many examples can be found were interesting jobs with social contacts for workers changed into dull and monotone ones. This counts specially for administrative oriented organisations, but also in more technical based organisations we can see variations to this theme. Nevertheless many advantages can be mentioned for the organisation itself, and of course for the customer himself, who is being served more accurate, faster and with a higher degree of service. The discussion on creative aspects mainly takes place in the technical oriented professions. Architects among them seem to be strongly represented. Specially in relation to CAD-techniques being obstructed in one's creative possibilities is very often mentioned as an argument for not adopting the new techniques.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	47c5
authors	Weiler, Kevin J.
year	1986
title	Topological Structures for Geometric Modeling
source	Computer and Systems Engineering, Rensselaer Polytechnic Institute
summary	Geometric modeling technology for representing three-dimensional objects has progressed from early wireframe representations, through surface representations, to the most recent representation, solid modeling. Each of these forms has many possible representations. The boundary representation technique, where the surfaces, edges, and vertices of objects are represented explicitly, has found particularly wide application. Many of the more sophisticated versions of boundary representations explicitly store topological information about the positional relationships among surfaces, edges, and vertices. This thesis places emphasis on the use of topological information about the shape being modeled to provide a framework for geometric modeling boundary representations and their implementations, while placing little constraint on the actual geometric surface representations used. The major thrusts of the thesis fall into two areas of geometric modeling. First, a theoretical basis for two-manifold solid modeling boundary topology representation is developed. The minimum theoretical and minimum practical topological adjacency information required for the unambiguous topological representation of manifold solid objects is determined. This provides a basis for checking the correctness of existing and proposed representations. The correctness of the winged edge structure is also explored, and several new representations which have advantages over existing techniques are described and their sufficiency verified. Second, a non-two-manifold boundary geometric modeling topology representation is developed which allows the unified and simultaneous representation of wireframe, surface, and solid modeling forms, while featuring a representable range beyond what is achievable in any of the previous modeling forms. In addition to exterior surface features, interior features can be modeled, and non-manifold features can be represented directly. A new data structure, the Radial Edge structure, which provides access to all topological adjacencies in a non-manifold boundary representation, is described and its completeness is verified. A general set of non-manifold topology manipulation operators is also described which is independent of a specific data structure and is useful for insulating higher levels of geometric modeling functionality from the specifics and complexities of underlying data structures. The coordination of geometric and topological information in a geometric modeling system is also discussed.
series	thesis:MSc
last changed	2003/02/12 22:37

_id	2fc1
authors	Zdepski, M. Stephen and Goldman, Glen
year	1986
title	The Computability of Design
doi	https://doi.org/10.52842/conf.acadia.1986.103
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 103-111
summary	A number of architectural design studios (second, third and fifth year) at the School of Architecture at the New Jersey Institute of Technology have undertaken traditional design problems through the use of IBM-AT microcomputer based CAD/Graphics systems. Utilizing three-dimensional modeling software, color graphics "paint" software, and animation software, the studios integrated the use of computers into the very heart of the core program as the primary means of design, simulation, and evaluation. At the same time, other non-computer based studios engaged in similar (and often identical) design problems. Therefore, the opportunity became available to compare and evaluate both the impact the computer made to the traditional architectural studio and also to the building design itself.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
doi	https://doi.org/10.52842/conf.ecaade.1986.167
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	ed51
authors	Bergeron, Philippe
year	1986
title	A General Version of Crow's Shadow Volumes
source	IEEE Computer Graphics and Applications September, 1986. vol. 6: pp. 17-28 : col. ill. includes bibliography.
summary	In 1977 Frank Crow introduced a new class of algorithms for the generation of shadows. His technique, based on the concept of shadow volumes, assumes a polygonal database and a constrained environment. For example, polyhedrons must be closed, and polygons must be planar. This article presents a new version of Crow's algorithm, developed at the Universite de Montreal, which attempts a less constrained environment. The method has allowed the handling of both open and closed models and nonplanar polygons with the viewpoint anywhere, including any shadow volume. It does not, however, sacrifice the essential features of Crow's original version: penetration between polygons is allowed, and any number of light sources can be defined anywhere in 3D space, including the view volume and any shadow volume. The method has been used successfully in the film Tony de Peltrie and is easily incorporated into an existing scan-line, hidden-surface algorithm
keywords	algorithms, shadowing, polygons, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
doi	https://doi.org/10.52842/conf.acadia.1986.037
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	0335
authors	Berzins, Valdis, Gray, Michael and Naumann, David
year	1986
title	Abstraction-Based Software Development
source	communications of the ACM. May, 1986. vol. 29: pp. 402-415. includes bibliography
summary	At the university of Minnesota an interdisciplinary team has been developing and running an ongoing course sequence in software engineering. The project served the dual purpose of giving the students some experience in applying the theory of software engineering to problems large enough to require a group effort, and at the same time enabling the development team to evaluate the effectiveness of the concepts and tools used. In this article the authors report on their experience with these concepts and tools, concentrating on the software- engineering rather than training and technology transfer aspects of the process
keywords	software, engineering, abstraction, programming
series	CADline
last changed	2003/06/02 13:58

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	4361
authors	Bishop, G. and Weimer, D.M.
year	1986
title	Fast Phong Shading
source	Computer Graphics (20) 4 pp. 103-106
summary	Computer image generation systems often represent curved surfaces as a mesh of polygons that are shaded to restore a smooth appearance. Phong shading is a well known algorithm for producing a realistic shading but it has not been used by real-time systems because of the 3 additions, 1 division and 1 square root required per pixel for its evaluation. We describe a new formulation for Phong shading that reduces the amount of computation per pixel to only 2 additions for simple Lambertian reflection and 5 additions and 1 memory reference for Phong's complete reflection model. We also show how to extend our method to compute the specular component with the eye at a finite distance from the scene rather than at infinity as is usually assumed. The method can be implemented in hardware for real-time applications or in software to speed image generation for almost any system.
series	journal paper
last changed	2003/11/21 15:16

_id	f5db
authors	Brooks, F.P.
year	1986
title	Walkthrough - A Dynamic Graphics System for Simulating Virtual Buildings
source	Proceedings 1986 Workshop on Interactive 3D Graphics. ACM: 9-22
summary	As part of our graphics research into virtual worlds, we are building a tool for an architect and his client to use for rapid prototyping of buildings by visually "walking through" them in order to refine specifications. Our first prototype simulated the new UNC Computer Science building with some 8000 polygons. BSP-tree software on the Adage Ikonas gave a colored, shaded perspective view every 3-5 seconds while the user moved a cursor in real-time over floorplans shown on the Vector-General 3300. The current (third) version uses Pixel-Planes to generate 9 updates/second, view images shown 4' x 6' by projector. Active short- and long-term research questions include speed-up, stereo, a 6-DoF interface with eye-level defaults, and an interactive model-building, model-changing system.
series	other
last changed	2003/11/21 15:16

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: