Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 197

Reformat results as: short short into frame detailed detailed into frame

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
doi	https://doi.org/10.52842/conf.acadia.1986.037
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a666
authors	Galle, Per
year	1986
title	Abstraction as a Tool of Automated Floor-Plan Design
source	Environment and Planning B: Planning and Design. 1986. vol. 13: pp. 21-46 : ill. includes bibliography
summary	The automated design of architectural floor plans satisfying given topological and dimensional constraints is a challenging field of research. In this paper ABSTRACTION is pointed out as an important conceptual tool of this field. A critical discussion of existing plan-design methods leads to the conclusion that the potentials of abstraction as a tool have not yet been fully recognized. The rest of the paper is an attempt to improve this situation by suggesting a new approach to automated floor-plan design. Theoretically, design is viewed as a one-to-many relation; a tree whose lines are directed from the root (the problem) towards the leaves (the solutions). Abstraction is viewed as the inverse many-to-one relation. A particular relation of abstraction is defined, such that the intermediate nodes of the tree (between root and leaves) are themselves floor plans, but are less detailed than the solutions. From the study of this concept of abstraction, it is concluded that the design algorithm based on it is likely to have certain useful properties
keywords	layout, automation, design, architecture, floor plans, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	896b
authors	Haider, Jawaid
year	1986
title	A Conceptual Framework for Communication -Instruction in Architectural Design
source	Pennsylvania State University
summary	Existing design models, it is generally acknowledged, are inadequate to deal with the complexity of contemporary situations; and an assessment of self-conscious design manifests a slow development in the power and scope of conceptualizing. The quality of knowledge and conceptual tools available to the designer largely determine his ability to conceive and accomplish; conversely, the limitations of method are reflected in design solutions. Some emerging social problem-solving paradigms, which seek to construct a cognitive psychology of problem solving, have a direct relevance to architectural design. Notwithstanding the traditional criticism and scepticism, problem solving is predicated by task environment and problem space as these have a significant impact on design synthesis. Despite a rigorous search for theoretical perspectives and methods, the concern for the quality of the physical environment persists unabated. Historically, architecture has depended on other disciplines for its theoretical insight; but the application of borrowed theories without a viable framework for translation has often resulted in misinterpretation. Aggravating the problem is the art-science controversy which has consequences for architectural practice and education. What is required is a unified approach encompassing the scientific and artistic modes of inquiry. But a unified perspective, involving vast and disparate areas of human knowledge, demands a conceptual framework for integrative learning. The proposed model of this study provides such a framework and calls for a re-examination of the conventional boundaries of design disciplines. It advocates an interdisciplinary approach and recognizes the design process as inherently a learning process; this shifts the emphasis from product to process and allows students to plan and assess their own design/learning experience. While the study focuses on substantive issues, it identifies a strategy for integrative learning applicable within the existing context of design education. Despite its untested nature, the proposed model can become a vehicle for stimulating coordination of all facets of human knowledge and experience toward creative design synthesis. It inculcates a sense of critical assessment of generative ideas by presenting a conceptually clearer picture of the design process to elicit a response to and a better understanding of the task environment of architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	682d
authors	Kim, Uk
year	1986
title	Model for an Integrated Design Evaluation System using Knowledge Bases
doi	https://doi.org/10.52842/conf.acadia.1986.204
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 204-215
summary	Computer-aided architectural design (CAAD) systems need to be integrated so that one unified system can generate and do various analysis and evaluation of building models. A data system can not solve this problem because all design concepts can not be stored in the database before the design is completed. As design stage proceeds, design concept and necessary information for analysis and evaluation become complex and detailed. In order to accommodate increasing entities and new relationships between them, knowledge-based systems are integrated into the database of building models. frame structure and production rules are adopted to represent knowledge about the database, and to represent evaluation rules respectively. The system is implemented in Prolog on an Apollo workstation.
series	ACADIA
last changed	2022/06/07 07:52

_id	0e5e
authors	Kociolek, A.
year	1986
title	CAD in Polish Building
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 235-245
summary	There is little CAAD in Polish architectural design offices, and only recently have practising architects discovered the computer. On the other hand, CAAD has been used for some time in research and development based at universities or in large design organizations. This chapter gives a broad picture of the computerization of building design in Poland, a complex process which concerns planning and financing, hardware, software, CAD practice, standardization, training, education, etc. Here architectural applications are treated on an equal basis, together with other applications representing design disciplines involved in design, such as structural and mechanical engineering. The underlying philosophy of this chapter is a belief that proper and well-balanced computerization of design in building which leaves creative work to human beings should result in better design and eventually in improvements in the built environment. Therefore integration of the design process in building seems more important for design practice than attempts to replace an architect by a computer, although the intellectual attraction of this problem is recognized.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	81ae
authors	Rasdorf, William J. and Parks, Linda M.
year	1986
title	Expert Systems and Engineering Design Knowledge
source	Electronic Computation Conference Proceedings (9th : 1986 : Birmingham, AL) American Society of Civil Engineers, pp. 28-42. CADLINE has abstract only.
summary	Of all the contributions of artificial intelligence (AI), expert systems show some of the most significant promise for engineering applications. An expert system provides a framework for acquiring, representing, and using knowledge about a particular application's domain. The role of knowledge in engineering design merits closer attention so that AI-oriented computer-aided engineering (CAE) systems can be developed and maintained systematically. Because 'knowledge' in engineering applications is loosely defined, it is necessary to identify knowledge types and the correlations between them before widespread engineering design applications can be achieved. The types of domain knowledge; facts, procedures, judgments, and control; differ from the classes of that knowledge; creative, innovative, and routine. Feasible engineering tasks for expert systems can be determined based on these types and classes of knowledge. Prototype expert systems have been developed for civil engineering applications to assist with interpretation, design, planning, diagnosis, control, and other engineering system functions. A number of these are described herein. Interpretive tasks require reasoning about a task in light of the knowledge available, while generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select an appropriate knowledge-engineering tool for the domain being considered. The critical features to be weighed after problem classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations. After considering all of these factors in the selection of the expert system took, the engineer can then proceed with the acquisition of knowledge and the construction and use of the expert system
keywords	design, knowledge, civil engineering, expert systems
series	CADline
last changed	2003/06/02 13:58

_id	c3ca
authors	Rasdorf, William J. and Watson, Bruce R.
year	1986
title	ADI : An Adaptive Database Interface for Dynamic Databases
source	ASME Symposium Proceedings on Knowledge based Expert Systems for Manufacturing. Anaheim, CA: American Society of Mechanical Engineers, Production Engineering Division, December, 1986. pp. 119-130. CADLINE has abstract only
summary	The operation of a manufacturing organization often depends on its underlying design and manufacturing databases. In a manufacturing environment, many users, both individuals and application programs, must have access to one or more of the organization's databases to provide, use, or modify data, to control information flow, and to facilitate information management. Such databases routinely undergo dynamic changes in both their content and their structure. These changes commonly result from the design of new products, the introduction of new materials, and the introduction of new machines and processes on the shop floor. Such continuing changes must be reflected in the database schemas and subsequently require that application programs be updated and that online users be educated on a continuous basis. The problem addressed in this paper is that it is difficult for users and application programs to get the information that they need, when they need it, from the multiple heterogeneous database management system (DBMS) environments that have evolved in design and manufacturing organizations. The solution proposed here is to build a general, extendable interface between database users and the many sources of data available to them. This in itself is not a new suggestion; a number of researchers have addressed portions of this problem. In general, the interfaces that they have developed to date are best suited to environments where the structure of the database is static and does not change over time. One of the things that this paper proposes that is different from existing work is an interface which handles the dynamic restructuring nature of manufacturing databases, enabling a user to obtain the most accurate and up to date information as the structure and content of the underlying databases change. Another unique aspect of the DBMS interface proposed herein is that the interface attempts to capture the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact identity of the required entities that are stored in the database
keywords	engineering, database, manufacturing, user interface
series	CADline
last changed	2003/06/02 10:24

_id	02c6
authors	Wheeler, B.J.Q
year	1986
title	A Unified Model for Building
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 200-231
summary	It is commonly recognized that the time-honoured procedure for preparing an architectural design for building on site is inefficient. Each member of a team of consultant professionals makes an independently documented contribution. For a typical project involving an architect and structural, electrical, mechanical and public services engineers there will be at least five separate sets of general- arrangement drawings, each forming a model of the building, primarily illustrating one discipline but often having to include elements of others in order to make the drawing readable. For example, an air-conditioning duct-work layout is more easily understood when superimposed on the room layout it serves which the engineer is not responsible for but has to understand. Both during their parallel evolution and later, when changes have to be made during the detailed design and production drawing stages, it is difficult and time consuming to keep all versions coordinated. Complete coordination is rarely achieved in time, and conflicts between one discipline and another have to be rectified when encountered on site with resulting contractual implications. Add the interior designer, the landscape architect and other specialized consultants at one end of the list and contractors' shop drawings relating to the work of all the consultants at the other, and the number of different versions of the same thing grows, escalating the concomitant task of coordination. The potential for disputes over what is the current status of the design is enormous, first, amongst the consultants and second, between the consultants and the contractor. When amendments are made by one party, delay and confusion tend to follow during the period it takes the other parties to update their versions to include them. The idea of solving this problem by using a common computer-based model which all members of the project team can directly contribute to is surely a universally assumed goal amongst all those involved in computer-aided building production. The architect produces a root drawing or model, the 'Architect's base plan', to which the other consultants have read-only access and on top of which they can add their own write-protected files. Every time they access the model to write in the outcome of their work on the project they see the current version of the 'Architect's base plan' and can thus respond immediately to recent changes and avoid wasting time on redundant work. The architect meanwhile adds uniquely architectural material in his own overlaid files and maintains the root model as everybody's work requires. The traditional working pattern is maintained while all the participants have the ability to see their colleagues, work but only make changes to those parts for which they are responsible.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	04dd
authors	Zozaya-Gorostiza and Hendrickson, Carlos and Chris
year	1986
title	A Network Representation and Algorithm for Task Planning
source	23 p. : ill Pittsburgh, PA: Engineering Design Research Center CMU, December, 1986. EDRC-12-08-87. includes bibliography.
summary	An activity planning algorithm based on a network representations of conditions and actions is presented. The algorithm performs backward expansions on each desired condition in order to express them as a combination of initial conditions and actions. A global problem network of actions and conditions is used to represent the history of successful conditions expansions. This representation maintains consistency and improves the efficiency of search procedure. Interpretation of this problem network leads to an actions network from which feasible plans are directly obtained. The network algorithm was implemented in LISP and is applied here to solve blockworld problems similar to those found in the artificial intelligence planning literature. However, the algorithm and the network representation are general and intended to be used as an analytical tool in planning systems that formulate sequences of multiple actions
keywords	algorithms, planning, networks, representation, AI
series	CADline
last changed	2003/06/02 13:58

_id	09b3
authors	Bier, Eric A. and Sloan, Kenneth R. Jr.
year	1986
title	Two-Part Texture Mappings
source	IEEE Computer Graphics and Applications September, 1986. pp. 40-53 : col. ill. includes bibliography.
summary	Most published techniques for mapping two-dimensional texture patterns onto three-dimensional curved surfaces assume that either the texture pattern has been predistorted to compensate for the distortion of the mapping or the curved surfaces are represented parametrically. The authors address the problem of mapping undistorted planar textures onto arbitrarily represented surfaces. Their mapping technique is done in two parts. First the texture pattern is embedded in 3- space on an intermediate surface. Then the pattern is projected onto the target surface in a way that depends only on the geometry of the target object (not on its parametrization). Both steps have relatively low distortion, so the original texture need not be predistorted. The authors also discuss interactive techniques that make two-part mapping practical
keywords	texture mapping, curved surfaces, computer graphics, rendering
series	CADline
last changed	2003/06/02 10:24

_id	644f
authors	Bijl, Aart
year	1986
title	Designing with Words and Pictures in a Logic Modelling Environment
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 128-145
summary	At EdCAAD we are interested in design as something people do. Designed artefacts, the products of designing, are interesting only in so far as they tell us something about design. An extreme expression of this position is to say that the world of design is the thoughts in the heads of designers, plus the skills of designers in externalizing their thoughts; design artifacts, once perceived and accepted in the worlds of other people, are no longer part of the world of design. We can describe design, briefly, as a process of synthesis. Design has to achieve a fusion between parts to create new parts, so that the products are recognized, as having a right and proper place in the world of people. Parts should be understood as referring to anything - physical objects, abstract ideas, aspirations. These parts occur in some design environment from which parts are extracted, designed upon and results replaced; in the example of buildings, the environment is people and results have to be judged by reference to that environment. It is characteristic of design that both the process and the product are not subject to explicit and complete criteria. This view of design differs sharply from the more orthodox understanding of scientific and technological endeavours which rely predominantly on a process of analysis. In the latter case, the approach is to decompose a problem into parts until individual parts are recognized as being amenable to known operations and results are reassembled into a solution. This process has a peripheral role in design when evaluating selected aspects of tentative design proposals, but the absence of well-defined and widely recognized criteria for design excludes it from the main stream of analytical developments.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	4431
authors	Calderaro, V. and Platone, C.
year	1986
title	Information systems and internvention technologies programmed to aid the energy saving within the limits of the existing building property rescue
doi	https://doi.org/10.52842/conf.ecaade.1986.192
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 192-201
summary	In our national territory the rescue of the existing building property is a very important problem. For that reason, starting front the presupposition that the existing buildings, restoration finds its real achievement by means of technological and installing interventions strictly connected with the energy costs and consumptions, this study sets as a planning method on various degrees to analyze, single out and propose the possible solutions based on qualitative and quantitative researches into the thermo-physical behaviour of the above-mentioned buildings. From a research done into the principal building properties related with the different national areas we can single out significant morphological samples and typical technological structures. This first analytical study allows the singling out of significant building models on which it's possible to value the thermal behaviour and possible subsequent restoring interventions by applying computerized mathematical models or by operating diagrams deduced from them. First of all, these mathematical models for simulation allow a valuation of the main thermal parameters (dispersion both in absolute value and in volumetric factor, medium thermal transmittance (U value) of geometrical models deduced from the typical above - mentioned cases.
series	eCAADe
last changed	2022/06/07 07:54

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	8237
authors	Gero, John S. and Coyne, Richard D.
year	1986
title	Developments in Expert Systems for Design Synthesis
source	New York: 1986. pp. 193-203
summary	The applicability of expert systems to design synthesis is demonstrated. This is achieved by means of inference rules which can interpret design specifications in order to produce designs. This approach is applicable to certain classes of design problems which can be subdivided into independent subproblems. An expert system which contains knowledge about conflict resolution applicable to the more general class of design problem is demonstrated
keywords	design, expert systems, synthesis
series	CADline
email
last changed	2003/05/17 10:17

_id	2156
authors	Hashimshony, Rivka, Roth, J. and Wachman, A.
year	1986
title	A Model for Generating Floor-Plans in Multi-Story Buildings
source	International Journal of Design Computing. April, 1986. vol. 1: pp. 136-157 : ill. includes bibliography
summary	A graph-theoretic method for computer generation of rectangular floor plans for multi-story buildings is outlined. The problem formulation takes account of adjacency requirements of rooms, dimensional constraints, and the need for vertical alignments of elements such as stairs and elevators. The solution method is to first turn the required adjacencies graph into a layout graph by adding edges, then color and direct the layout graph, cut the colored directed graph into two subgraphs, and finally use the PERT technique to dimension the plan. An example problem of design of a medical clinic is formulated and solved using this method
keywords	space allocation, architecture, CAD, floor plans, synthesis, graphs, dimensioning
series	CADline
last changed	2003/06/02 10:24

For more results click below: