Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 211

Reformat results as: short short into frame detailed detailed into frame

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	e26f
authors	Kalay, Y. (ed.)
year	1987
title	Computability of Design
source	New York: Wiley & Sons
summary	Computer-aided design (CAD) has promised to transform the art and science of architectural design. Yet, despite some significant achievements in the past 3 decades, it has so far failed to do so. This stimulating volume, derived from a symposium held at SUNY, Buffalo in December 1986, explores the reasons why design is so difficult to support by computational means, and what can be done to alleviate this difficulty. Written by an interdisciplinary panel of experts, it presents a varied and comprehensive view of the ways creative design processes can be modelled. The contributors do not all reach the same conclusions, which makes this book lively reading. Topics are arranged into four parts: constructing models of the design process, the computational representation of design knowledge (including spatial information and implicit design intent), methods for computing the design process as a whole (including mathematical programming, expert systems, and shape grammars), and the integration of CAD with traditional design practices.
series	other
last changed	2003/04/23 15:14

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	020d
authors	Shaviv, Edna
year	1986
title	Layout Design Problems: Systematic Approaches
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 28-52
summary	The complexity of the layout design problems known as the 'spatial allocation problems' gave rise to several approaches, which can be generally classified into two main streams. The first attempts to use the computer to generate solutions of the building layout, while in the second, computers are used only to evaluate manually generated solutions. In both classes the generation or evaluation of the layout are performed systematically. Computer algorithms for 'spatial allocation problems' first appeared more than twenty-five years ago (Koopmans, 1957). From 1957 to 1970 over thirty different programs were developed for generating the floor plan layout automatically, as is summarized in CAP-Computer Architecture Program, Vol. 2 (Stewart et al., 1970). It seems that any architect who entered the area of CAAD felt that it was his responsibility to find a solution to this prime architectural problem. Most of the programs were developed for batch processing, and were run on a mainframe without any sophisticated input/output devices. It is interesting to mention that, because of the lack of these sophisticated input/output devices, early researchers used the approach of automatic generation of optimal or quasioptimal layout solution under given constraints. Gradually, we find a recession and slowdown in the development of computer programs for generation of layout solutions. With the improvement of interactive input/output devices and user interfaces, the inclination today is to develop integrated systems in which the architectural solution is obtained manually by the architect and is introduced to the computer for the appraisal of the designer's layout solution (Maver, 1977). The manmachine integrative systems could work well, but it seems that in most of the integrated systems today, and in the commercial ones in particular, there is no route to any appraisal technique of the layout problem. Without any evaluation techniques in commercial integrated systems it seems that the geometrical database exists Just to create working drawings and sometimes also perspectives.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	04dd
authors	Zozaya-Gorostiza and Hendrickson, Carlos and Chris
year	1986
title	A Network Representation and Algorithm for Task Planning
source	23 p. : ill Pittsburgh, PA: Engineering Design Research Center CMU, December, 1986. EDRC-12-08-87. includes bibliography.
summary	An activity planning algorithm based on a network representations of conditions and actions is presented. The algorithm performs backward expansions on each desired condition in order to express them as a combination of initial conditions and actions. A global problem network of actions and conditions is used to represent the history of successful conditions expansions. This representation maintains consistency and improves the efficiency of search procedure. Interpretation of this problem network leads to an actions network from which feasible plans are directly obtained. The network algorithm was implemented in LISP and is applied here to solve blockworld problems similar to those found in the artificial intelligence planning literature. However, the algorithm and the network representation are general and intended to be used as an analytical tool in planning systems that formulate sequences of multiple actions
keywords	algorithms, planning, networks, representation, AI
series	CADline
last changed	2003/06/02 13:58

_id	a833
authors	Jong, M. de
year	1986
title	A Spatial Relational Reference Model (3RM)
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 85-91
summary	In this chapter we hope to provide the reader with an impression of the objective, framework and possibilities of 3RM in the construction industry. In Dutch, 3RM stands for 'Ruimtelijk Relationeel Referentie Model' (Spatial Relational Reference Model). The model could begin to be used as an information-bearer in the building industry within which the specific trade information for each of the building participants could be interrelated, including drafting symbolism, building costs, physical qualities and building regulations. In this way, the model can be used as a means to a more efficient running of the building process and enabling the integration of information, at project level, provided by various building participants. The project should be defined in the same way as is a typical architectural project, whereby the actual development as well as the project management is carried out by architects. For the time being, development is limited to integral use at the design stage, but it also offers sufficient expansion possibilities to be able to function as a new communications model throughout the complete building process. We shall first provide information as to the origin, the objective and the execution of the project. Thereafter, we shall attempt to state the theoretical information problem within the building industry and the solution to this offered through 3RM. Finally, we shall report upon the results of the first phase of the 3RM project.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
doi	https://doi.org/10.52842/conf.ecaade.1986.167
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
doi	https://doi.org/10.52842/conf.acadia.1986.037
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	cb04
authors	Calderaro, V., Giangrande, A., Mirabelli, P. and Mortola, E.
year	1986
title	Decision Support Systems (DSS) in Computer Aided Architectural Design (CAAD)
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 20-38
doi	https://doi.org/10.52842/conf.ecaade.1986.020
summary	The paper describes a new procedure of design management and the results of its application to architectural design in an exercise developed in a didactic context. The procedure requires the participation of all “actors” (i.e. designers, experts, clients, users, etc.) involved in the design process and which contribute, directly or indirectly, to obtain the result. By generating and developing alternative design solutions, this procedure allows the exploration of a region of the performances space which is generally more vast than that explored by the traditional designer.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2b3c
authors	Carrara, G. and Novembri, G.
year	1986
title	KAAD - Knowledge-based Assistance for Architectural Design
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 202-212
doi	https://doi.org/10.52842/conf.ecaade.1986.202
summary	The research being conducted at the CABD LAB at the Department of Building and Environmental Control Technologies is geared to the production of an Expert System for architectural design, which is able to perform interactive design tasks and help to provide accurate and complete description of the buildings in question. The Expert System will control the design process, continually ensuring consistency between the definitions of the designer and a given set of constraints. Accordingly, the System will be able to determine the effects of of definition, performing the choices taken at different stages necessary calculations and checks. The System is based on a general representation of the building objects, from individual components to the whole building defined in terms of a number of hierarchical, topological and functional relational structures resulting from earlier research conducted into the automatic management of architectural design since 1975.
series	eCAADe
last changed	2022/06/07 07:54

_id	63d0
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Constraint-bounded design search
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 146-157
summary	The design process requires continual checking of the consistency of design choices against given sets of goals that have been fulfilled. Such a check is generally performed by comparing abstract representations of design goals with these of the sought real building objects (RBO) resulting from complex intellectual activities closely related to the designer's culture and to the environment in which he operates. In this chapter we define a possible formalization of such representations concerning the goals and the RBO that are usually considered in the architectural design process by our culture in our environment. The representation of design goals is performed by expressing their objective aspects (requirements) and by defining their allowable values (performance specifications). The resulting system of requirements defines the set of allowable solutions and infers an abstract representation of the sought building objects (BO) that consists of the set of characteristics (attributes and relations) which are considered relevant to represent the particular kind of RBO with respect to the consistency check with design goals. The values related to such characteristics define the performances of the RBO while their set establishes its behaviour. Generally speaking, there is no single real object corresponding to an abstract representation but the whole class of the RBO that are equivalent with respect to the values assumed by the considered characteristics. The more we increase the number of these, as well as their specifications, the smaller the class becomes until it coincides with a single real object - given that the assessed specifications be fully consistent. On the other hand, the corresponding representation evolves to the total prefiguration of the RBO. It is not therefore possible to completely define a BO representation in advance since this is inferred by the considered goals and is itself a result of the design process. What can only be established in advance is that any set of characteristics assumed to represent any RBO consists of hierarchic, topological, geometrical and functional relations among the parts of the object at any level of aggregation (from components to space units, to building units, to the whole building) that we define representation structure (RS). Consequently the RS may be thought as the elementary structures that, by superposition and interaction, set up the abstract representation that best fit with design goals.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	876b
authors	Christiansson, Per
year	1986
title	Structuring a Learning Building Design System
source	Advancing Building Technology, CIB International Congress (10th : 1986 : Washington D. C.). 9 p. : ill. includes bibliography
summary	It is now vital to aim at formulating computer system modules that possess a high ability to adapt their behavior to fundamental human values and a complex and unstandardized (not uniform) building process but at the same time put constraints on them so that we don't end up with a confusion of computerized routines hard to access, control and understand. In the paper formulations are made of basic artifact skeletons outgoing from the properties to give integrated CAD systems and to those rules by which the growth of the systems are governed. System learning domains including conceptual modelling tools are presented aiming at supporting professional skill, creativity and integration between process actors. The basis for system implementation is frames, descriptive language (PROLOG) and relational databases with regard taken to future possibilities to parallel processing
keywords	modeling, learning, integration, database, AI, design, systems, frames
series	CADline
last changed	1999/02/12 15:07

_id	aa60
authors	Christiansson, Per
year	1986
title	Properties of Future Knowledge Based Systems : The Interactive Consultation System Example
source	computer Aided Architectural Design - Developments in Education and Practice. 1986. 14 p. : ill. includes bibliography
summary	An introduction to knowledge based systems is presented to point out possibilities and limitations of the new software and hardware technology now beginning to be available. A pilot study on the use of an expert system shell (the ES/P Advisor), is briefly discussed. A part of the Swedish concrete building code was implemented in the expert system shell to demonstrate the use of an interactive consultation system. Ideas on how compact video-discs can be used in this type of systems are also put forward
keywords	knowledge base, systems, expert systems, CAD, media
series	CADline
last changed	1999/02/12 15:07

_id	e73e
authors	Christiansson, Per
year	1990
title	State of the Art of Computer Use in Practical Architectural Design in Sweden
source	A/E/C Systems Japan. September, 1990. [4] p. English and Japanese
summary	A status report on Computer Aided Design in Sweden, since 1986
keywords	CAD, architecture, practice
series	CADline
last changed	1999/02/12 15:07

For more results click below: