Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 211

Reformat results as: short short into frame detailed detailed into frame

_id	4431
authors	Calderaro, V. and Platone, C.
year	1986
title	Information systems and internvention technologies programmed to aid the energy saving within the limits of the existing building property rescue
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 192-201
doi	https://doi.org/10.52842/conf.ecaade.1986.192
summary	In our national territory the rescue of the existing building property is a very important problem. For that reason, starting front the presupposition that the existing buildings, restoration finds its real achievement by means of technological and installing interventions strictly connected with the energy costs and consumptions, this study sets as a planning method on various degrees to analyze, single out and propose the possible solutions based on qualitative and quantitative researches into the thermo-physical behaviour of the above-mentioned buildings. From a research done into the principal building properties related with the different national areas we can single out significant morphological samples and typical technological structures. This first analytical study allows the singling out of significant building models on which it's possible to value the thermal behaviour and possible subsequent restoring interventions by applying computerized mathematical models or by operating diagrams deduced from them. First of all, these mathematical models for simulation allow a valuation of the main thermal parameters (dispersion both in absolute value and in volumetric factor, medium thermal transmittance (U value) of geometrical models deduced from the typical above - mentioned cases.
series	eCAADe
last changed	2022/06/07 07:54

_id	2b3c
authors	Carrara, G. and Novembri, G.
year	1986
title	KAAD - Knowledge-based Assistance for Architectural Design
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 202-212
doi	https://doi.org/10.52842/conf.ecaade.1986.202
summary	The research being conducted at the CABD LAB at the Department of Building and Environmental Control Technologies is geared to the production of an Expert System for architectural design, which is able to perform interactive design tasks and help to provide accurate and complete description of the buildings in question. The Expert System will control the design process, continually ensuring consistency between the definitions of the designer and a given set of constraints. Accordingly, the System will be able to determine the effects of of definition, performing the choices taken at different stages necessary calculations and checks. The System is based on a general representation of the building objects, from individual components to the whole building defined in terms of a number of hierarchical, topological and functional relational structures resulting from earlier research conducted into the automatic management of architectural design since 1975.
series	eCAADe
last changed	2022/06/07 07:54

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	c898
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 107-119
summary	Computer-aided architectural design (CAAD) has come to mean a number of often disparate activities. These can be placed into one of two categories: using the computer as a drafting and, to a lesser extent, modelling system; and using it as a design medium. The distinction between the two categories is often blurred. Using the computer as a drafting and modelling tool relies on computing notions concerned with representing objects and structures numerically and with ideas of computer programs as procedural algorithms. Similar notions underly the use of computers as a design medium. We shall return to these later. Clearly, all computer programs contain knowledge, whether methodological knowledge about processes or knowledge about structural relationships in models or databases. However, this knowledge is so intertwined with the procedural representation within the program that it can no longer be seen or found. Architecture is concerned with much more than numerical descriptions of buildings. It is concerned with concepts, ideas, judgement and experience. All these appear to be outside the realm of traditional computing. Yet architects discoursing use models of buildings largely unrelated to either numerical descriptions or procedural representations. They make use of knowledge - about objects, events and processes - and make nonprocedural (declarative) statements that can only be described symbolically. The limits of traditional computing are the limits of traditional computer-aided design systems, namely, that it is unable directly to represent and manipulate declarative, nonalgorithmic, knowledge or to perform symbolic reasoning. Developments in artificial intelligence have opened up ways of increasing the applicability of computers by acquiring and representing knowledge in computable forms. These approaches supplement rather than supplant existing uses of computers. They begin to allow the explicit representations of human knowledge. The remainder of this chapter provides a brief introduction to this field and describes, through applications, its relevance to computer- aided architectural design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	63d0
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Constraint-bounded design search
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 146-157
summary	The design process requires continual checking of the consistency of design choices against given sets of goals that have been fulfilled. Such a check is generally performed by comparing abstract representations of design goals with these of the sought real building objects (RBO) resulting from complex intellectual activities closely related to the designer's culture and to the environment in which he operates. In this chapter we define a possible formalization of such representations concerning the goals and the RBO that are usually considered in the architectural design process by our culture in our environment. The representation of design goals is performed by expressing their objective aspects (requirements) and by defining their allowable values (performance specifications). The resulting system of requirements defines the set of allowable solutions and infers an abstract representation of the sought building objects (BO) that consists of the set of characteristics (attributes and relations) which are considered relevant to represent the particular kind of RBO with respect to the consistency check with design goals. The values related to such characteristics define the performances of the RBO while their set establishes its behaviour. Generally speaking, there is no single real object corresponding to an abstract representation but the whole class of the RBO that are equivalent with respect to the values assumed by the considered characteristics. The more we increase the number of these, as well as their specifications, the smaller the class becomes until it coincides with a single real object - given that the assessed specifications be fully consistent. On the other hand, the corresponding representation evolves to the total prefiguration of the RBO. It is not therefore possible to completely define a BO representation in advance since this is inferred by the considered goals and is itself a result of the design process. What can only be established in advance is that any set of characteristics assumed to represent any RBO consists of hierarchic, topological, geometrical and functional relations among the parts of the object at any level of aggregation (from components to space units, to building units, to the whole building) that we define representation structure (RS). Consequently the RS may be thought as the elementary structures that, by superposition and interaction, set up the abstract representation that best fit with design goals.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	4512
authors	Flemming, Ulrich
year	1986
title	On the Representation and Generation of Loosely-Packed Arrangements of Rectangles
source	33 p. : ill Pittsburgh: Engineering Design Research Center, CMU, September, 1986. includes bibliography.
summary	Several computer programs that enumerate rectangular dissections as solutions to certain layout problems have established a distinct paradigm for dealing with the crucial theoretical issues involved. The present paper suggests an extension of the paradigm to include `loosely-packed arrangements of rectangles,' which are of wider applicability in an architectural context. The paper introduces orthogonal structures to represent these arrangements and establishes the conditions of well-formedness for these structures. It presents a grammar to enumerate orthogonal structures and suggests that best use is made of the grammar if it is incorporated into a generative expert system, able to serve as a vehicle to discover, encode and utilize a broad range of constraints and criteria in the generation of layout alternatives
keywords	expert systems, architecture, space allocation, floor plans, rectangles, shape grammars, layout
series	CADline
email
last changed	2003/02/26 17:24

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	4d2d
authors	McCartney, Allan
year	1986
title	Teaching Computer Aided Architectural Design - Problems of Identity and Support
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 88-96
doi	https://doi.org/10.52842/conf.ecaade.1986.088
summary	A recent survey carried out in the U.K., which identified the activities in the majority of the Schools of Architecture in the field of CAAD, broadly indicated that whilst most of the schools provided a taught course in CAAD, the nature and extent of the content varied significantly. In many cases, student participation in CAAD was entirely voluntary, whilst in other cases a considerable amount of time was allocated within existing course structures.
series	eCAADe
last changed	2022/06/07 07:59

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	a980
authors	Rosenman, Michael A., Gero, John S. and Hutchinson, Peter J. (et al)
year	1986
title	Expert Systems Applications in Computer-aided Design
source	Guildford: Butterworth, 1986. pp. 218-225. Reprinted in Computer Aided Design 18(10): pp. 546-551
summary	Rule-based expert system shells are demonstrated to be useful in elementary design decision making. Two applications are presented which utilize the BUILD shell. The first is concerned with the selection and design of earth-retaining structures and makes use of passive graphics in descriptions. The second is concerned with the analysis and synthesis of kitchens and uses graphics to allow the user to interact with the system. Such systems are useful when the range of options is small
keywords	applications, CAD, expert systems, design process, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	f5db
authors	Brooks, F.P.
year	1986
title	Walkthrough - A Dynamic Graphics System for Simulating Virtual Buildings
source	Proceedings 1986 Workshop on Interactive 3D Graphics. ACM: 9-22
summary	As part of our graphics research into virtual worlds, we are building a tool for an architect and his client to use for rapid prototyping of buildings by visually "walking through" them in order to refine specifications. Our first prototype simulated the new UNC Computer Science building with some 8000 polygons. BSP-tree software on the Adage Ikonas gave a colored, shaded perspective view every 3-5 seconds while the user moved a cursor in real-time over floorplans shown on the Vector-General 3300. The current (third) version uses Pixel-Planes to generate 9 updates/second, view images shown 4' x 6' by projector. Active short- and long-term research questions include speed-up, stereo, a 6-DoF interface with eye-level defaults, and an interactive model-building, model-changing system.
series	other
last changed	2003/11/21 15:16

_id	a661
authors	Cajati, Claudio and Calandro, Lucia
year	1986
title	Architectural analysis of buildings in order to choice new functional destinations: an application of computer graphics for Faculty of Architecture's students
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 17-19
doi	https://doi.org/10.52842/conf.ecaade.1986.017
summary	The research tries to give a little but meaningful answer to the specific context of the Faculty of Architecture of Naples. Such a context presents a delay of teachers and researchers, in their teaching and researching activity, in beginning the CAAD way. Often the delay is due to a wrong attitude: a too high or too low expectation towards the use of the computer. In such a situation, the chief target of the research is the student of architecture. It is possible and useful to address a clear message, by a simple educational material, just to the student of architecture; not necessarily by producing a software or modifying some existing one, but also applying a given available software to an important architectural question.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	2156
authors	Hashimshony, Rivka, Roth, J. and Wachman, A.
year	1986
title	A Model for Generating Floor-Plans in Multi-Story Buildings
source	International Journal of Design Computing. April, 1986. vol. 1: pp. 136-157 : ill. includes bibliography
summary	A graph-theoretic method for computer generation of rectangular floor plans for multi-story buildings is outlined. The problem formulation takes account of adjacency requirements of rooms, dimensional constraints, and the need for vertical alignments of elements such as stairs and elevators. The solution method is to first turn the required adjacencies graph into a layout graph by adding edges, then color and direct the layout graph, cut the colored directed graph into two subgraphs, and finally use the PERT technique to dimension the plan. An example problem of design of a medical clinic is formulated and solved using this method
keywords	space allocation, architecture, CAD, floor plans, synthesis, graphs, dimensioning
series	CADline
last changed	2003/06/02 10:24

_id	ed11
authors	Kieffer, Bruce D.
year	1986
title	An Interactive CAD Based System Integrating Visual Analysis & Design
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 191-202
doi	https://doi.org/10.52842/conf.acadia.1986.191
summary	The paper describes the development of an enhanced CAD based instructional system specifically focusing on a linkage between the analytical and creative tasks necessary during the early schematic or conceptual design. The first two components of the system are fairly conventional items and include a tutorial and library of six (6) two and three dimensional CAD design files which document the visual and organizational aspects of archetype buildings and spaces. The CAD facility allows a user to selectively highlight and combine for review, various features of a buildings design. This allows its users to literally, "build-up" an understanding of the complexity of factors at work in recognizably good building. The final component to a customized CAD environment allowing users to develop their own designs with the same tools used during analysis of the archetypes. In addition to a description of the system, the paper identifies the effectiveness measures and instructional setting being established for evaluation of the system.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	a920
authors	Kulcke, Richard
year	1989
title	CAAD in the Architectural Education of the Fachhochschulen in the Federal Republic of Germany
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.3.1
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w7a
summary	For over 10 years the author has been a teacher in the field of "computer application in architecture" at the Fachhochschule. Since 1985 he regularly has been taking part in the conferences of A.I.I.D.A. (Arbeitskreis INFORMATIK IN DER ARCHlTEKTENAUSBILDUNG). All the faculties of architecture at the Fachhochschulen (about 10) can send their representatives of CAAD to the conferences. A.I.I.D.A. has been having 2 conferences a year since 1985. At the last conference in Wiesbaden a paper with statements of A.I.I.D.A. for the further education in CAAD was finished. The author presents and explains this paper. On the other hand he shows the actual education program of CAAD of his faculty. The education in CAAD started in 1972 with basic information without practical elements. Now the practical work with the workstation is talking most of the time . The computer application is available for subjects like Building Economics, Building and Structure Design and others. With his assistant the author developed programs of the field of Building Economics. In 1986 he started introduce CAD with AutoCAD in the education program. Now also other colleagues start to integrate CAAD into their subjects.
series	eCAADe
last changed	2022/06/07 07:50

_id	8190
authors	Lawson, B.
year	1986
title	Teaching CAAD at Sheffield University
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 78-87
doi	https://doi.org/10.52842/conf.ecaade.1986.078
summary	The University of Sheffield Department of Architecture has been using Computer Aided Architectural Design in its teaching now for over ten years. During that time there has also been a major research unit in CAAD working in the department and most of the software used in our teaching programme has originated in our own research unit. Our students have now got access to a wide range of CAAD programs including 2D draughting, 3D colour visualisation, environmental analysis, structural design and cost estimating. We have generated our own specialised systems of terrain modelling and intelligent building modelling which link to both the visualisation and environmental appraisal software. Students also have access to data base and word processing software. CAAD has been used in all five years of our course and we also have students working .with CAAD during their professional experience years. Over this ten year period we have gradually altered and refined our approach to the educational use of CAAD and this paper will describe this approach and present some of the lessons we have learnt. I want to organise the paper into two main sections; firstly what are we trying to achieve by teaching CAAD on our course, and secondly, how do we fit this into the curriculum and what effect does it have.
series	eCAADe
last changed	2022/06/07 07:52

For more results click below: