Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	09b3
authors	Bier, Eric A. and Sloan, Kenneth R. Jr.
year	1986
title	Two-Part Texture Mappings
source	IEEE Computer Graphics and Applications September, 1986. pp. 40-53 : col. ill. includes bibliography.
summary	Most published techniques for mapping two-dimensional texture patterns onto three-dimensional curved surfaces assume that either the texture pattern has been predistorted to compensate for the distortion of the mapping or the curved surfaces are represented parametrically. The authors address the problem of mapping undistorted planar textures onto arbitrarily represented surfaces. Their mapping technique is done in two parts. First the texture pattern is embedded in 3- space on an intermediate surface. Then the pattern is projected onto the target surface in a way that depends only on the geometry of the target object (not on its parametrization). Both steps have relatively low distortion, so the original texture need not be predistorted. The authors also discuss interactive techniques that make two-part mapping practical
keywords	texture mapping, curved surfaces, computer graphics, rendering
series	CADline
last changed	2003/06/02 10:24

_id	e43b
authors	Blasi, D. and Scudo, G.
year	1986
title	Experience of Output Visualisation in Thermal Performance Analysis and Design.
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 186-191
doi	https://doi.org/10.52842/conf.ecaade.1986.186
summary	GKS didactic application in output visualisation of thermal behaviour simulation in building analysis and design. Energy analysis is performed by BEETA (Built Environment Energy Test and Analysis) code. It is a numerical simulation code which allows to simulate the building multizone thermal behaviour with different passive devices (Direct Gain, Greenhouse, Solar Chimney, Trompe, Convective and Radiative Cooling etc.). The code is based on thermal network theory and methods; the set of thermal equation is normally solved every hour or less by the coefficient matrix inversion method. An interactive loop is provide for dealing with non- linear thermal conductance problems with continuous or step variation (i.e. air mixing through an opening between two spaces, Trompe wall convective loop, etc.) The code allows to take into account urban obstructions and shading devices.
series	eCAADe
last changed	2022/06/07 07:52

_id	a9b1
authors	Cohen, M.F., Greenberg, D.P. and Immel, D.S. (et al)
year	1986
title	An Efficient Radiosity Approach for Realistic Image Synthesis
source	IEEE Computer Graphics and Applications March, 1986. vol. 6: pp. 26-35 : col. ill. includes bibliography.
summary	The radiosity method models the interaction of light between diffusely reflecting surfaces and accurately predicts the global illumination effects. Procedures are now available to simulate complex environments including occluded and textured surfaces. For accurate rendering, the environment must be discretized into a fine mesh, particularly in areas of high intensity gradients. The interdependence between surfaces implies solution techniques which are computationally intractable. This article describes new procedures to predict the global illumination function without excessive computational expense. Statistics indicate the enormous potential of this approach for realistic image synthesis, particularly for dynamic images of static environments
keywords	computer graphics, radiosity, rendering, algorithms
series	CADline
last changed	2003/06/02 14:42

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4c79
authors	Aguilar, Lorenzo
year	1986
title	A Format for a Graphical Communications Protocol
source	IEEE Computer Graphics and Applications vol. 6.no. 3 (March, 1986): pp. 52-62
summary	This article describes the requirements for a graphical format on which a graphical on-line communications protocol can be based. It is argued that on-line graphical communications is similar to graphical session capture, and thus the author proposes an interactive graphical communications format using the GKSM session metafile. The discussion includes items that complement the GKSM metafile such as a format for on-line interactive exchange. One key application area of such a format is multimedia on-line conferencing. Therefore, a conferencing software architecture for processing the proposed format is presented. This format specification is made available to those planning multimedia conferencing systems
keywords	user interface, communication, computer graphics, multimedia, standards
series	CADline
last changed	1999/02/12 15:07

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	2ec8
authors	Arditi, Aries and Gillman, Arthur E.
year	1986
title	Computing for the Blind User
source	BYTE Publication Inc. March, 1986. pp. 199-208. includes some reference notes
summary	In this article the authors present some of the human-factors issues specific to non visual personal computing. The authors' concern is with the accuracy, speed, and generality of the blind-user interface, to make computers more accessible and efficient for blind and visually impaired persons
keywords	user interface, disabilities
series	CADline
last changed	2003/06/02 13:58

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6c8e
authors	Barbera, Salvatore and Correnti, Gabriele
year	1986
title	Reticular and Linear Planning of Erecting Yards Aided by Personal Computer
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 157-166
doi	https://doi.org/10.52842/conf.ecaade.1986.157
summary	This study has been carried out during the Course of Ergotecnica Edile hold at the Instituto Dipartimentale di Architettura e Urbanistica of Catania University, and it has been addressed to the students of the Faculty of Civil Engineering (manufacturing and direction of civil works). The present study aims at instructing the students as refers to planning, through computers, erecting yards. Work-planning is specifically important with reference both to the starting program and to the carrying on of the work. Within this context, workplanning is useful as regard the control and contingent correction of the work. In the latter case, divergencies between work-evolution and forecast are of primary value.
series	eCAADe
last changed	2022/06/07 07:54

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
doi	https://doi.org/10.52842/conf.ecaade.1986.167
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	4ed0
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1986
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	xiv, 476 p. : ill. (some col.) Los Altos, California: Morgan Kaufmann Pub. Inc., 1986. Forewords by Pierre Bezier and Robin A. Forrest. Includes bibliography: p. 455-465 and index
summary	Discusses the use of splines from the point of view of the computer scientist concentrating on parametric spline curves and parametric,tensor-product spline surfaces
keywords	splines, theory, computer graphics, computational geometry
series	CADline
last changed	2003/06/02 14:42

_id	aec8
authors	Bellinghall, Leigh
year	1986
title	The MicroCad Explosion : An Eye to Applications Clarifies Choices
source	computer Graphics World March, 1986. vol. 9: pp. 23-28 : col. ill.
summary	Two strong trends affirm increasing market interest in micro systems. While early programs were developed for personal computers, turnkey system houses are now stretching heavy-duty mini and mainframe-hosted programs down to micros. This article gives a selective survey of popular micro-CAD software, looks at packages in both development areas
keywords	drafting, systems, CAD, software, applications
series	CADline
last changed	1999/02/12 15:07

_id	8060
authors	Bentley, Jon L. and Kernighan, Brian W.
year	1986
title	GRAP - a Language for Typesetting Graphs
source	communications of the ACM. August, 1986. vol. 29: pp. 782-792 : charts. includes bibliography
summary	The authors describe a system that makes it easy and convenient to describe graphs and to include them as an integral part of the document formatting process
keywords	programming, computer graphics, algorithms, business
series	CADline
last changed	2003/06/02 10:24

_id	a3bd
authors	Beretta Covacivich, N., loannilli, M., Lazzari, M., Scandurra E. and Schiavoni U.
year	1986
title	Urban Planning Computer Aided Methods
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 180-185
doi	https://doi.org/10.52842/conf.ecaade.1986.180
summary	In the practice of urban centers analysis and of urban planning projects, a noticeable aspect is the absence of some essential information required in the planning process due to the natural difficulty to manage the numerous data to process.
series	eCAADe
last changed	2022/06/07 07:54

_id	ed51
authors	Bergeron, Philippe
year	1986
title	A General Version of Crow's Shadow Volumes
source	IEEE Computer Graphics and Applications September, 1986. vol. 6: pp. 17-28 : col. ill. includes bibliography.
summary	In 1977 Frank Crow introduced a new class of algorithms for the generation of shadows. His technique, based on the concept of shadow volumes, assumes a polygonal database and a constrained environment. For example, polyhedrons must be closed, and polygons must be planar. This article presents a new version of Crow's algorithm, developed at the Universite de Montreal, which attempts a less constrained environment. The method has allowed the handling of both open and closed models and nonplanar polygons with the viewpoint anywhere, including any shadow volume. It does not, however, sacrifice the essential features of Crow's original version: penetration between polygons is allowed, and any number of light sources can be defined anywhere in 3D space, including the view volume and any shadow volume. The method has been used successfully in the film Tony de Peltrie and is easily incorporated into an existing scan-line, hidden-surface algorithm
keywords	algorithms, shadowing, polygons, computer graphics
series	CADline
last changed	1999/02/12 15:07

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
doi	https://doi.org/10.52842/conf.acadia.1986.037
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

For more results click below: