Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	242d
authors	Atkin, Brian L. and Gill, E. Moira
year	1986
title	CAD and Management of Construction Projects
source	Journal of Construction Engineering and Management, Vol. 112, December, pp. 557-565
summary	The increasing interest in computer-aided design (CAD) has prompted research that is aimed at identifying the opportunities for construction managers and building contractors. It has been found that the use of CAD systems in the U.K. is mainly confined to the production of detailed drawings. Indeed, most of the systems used are 2-D drafting tools and incapable of supporting the integration of even modest amounts of nongraphical (construction) data. On the other hand, many 3-D modeling systems have the potential to integrate construction data, although they appear to be almostignored. The use of 3-D modeling systems is considered to be the most suitable vehicle for successfully integrating these data. However, this is likely to necessitate the introduction of separate databases, preferably of the relational type. The use of 3-D modeling systems in assessing the construction implications of outline designs also presents interesting possibilities and is discussed.
series	journal paper
last changed	2003/04/23 15:14

_id	caadria2006_601
id	caadria2006_601
authors	BINSU CHIANG, MAO-LIN CHIU
year	2006
title	PRIVATE/UN-PRIVATE SPACE: Scenario-based Digital Design for Enhancing User Awareness
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 601-603
doi	https://doi.org/10.52842/conf.caadria.2006.x.s8b
summary	Context awareness is important for human senses of places as well as human computer interaction. The aim of this research paper is focusing on controlling the user's privacy in a smart space which is adaptive to different users for enhancing the user's awareness in his diary life. In Environmental Psychology, the definition of privacy is that an individual has the control of deciding what information of himself is released to others, and under how he interact with others. (Westin 1970) And privacy is categorized as the linguistic privacy and visual privacy. (Sundstorm 1986). Solutions for privacy control: Plan Layout, Vision Boundary, Access Control and Architecture Metaphor - the transmission of information is not ascertainable for every single user. Although information are shown in public, but information is implied by cues and symbols. Only a certain user or a group of users have access to the full context of information. The methodology is to form an analytic framework to study the relationship between information, user and activities by using the computational supports derived from KitchenSense, ConceptNet, Python, 3d Studio Max and Flash; and to record patterns built up by users' behaviour and actions. Furthermore, the scenario-based simulation can envision the real world conditions by adding interfaces for enhancing user awareness.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	4512
authors	Flemming, Ulrich
year	1986
title	On the Representation and Generation of Loosely-Packed Arrangements of Rectangles
source	33 p. : ill Pittsburgh: Engineering Design Research Center, CMU, September, 1986. includes bibliography.
summary	Several computer programs that enumerate rectangular dissections as solutions to certain layout problems have established a distinct paradigm for dealing with the crucial theoretical issues involved. The present paper suggests an extension of the paradigm to include `loosely-packed arrangements of rectangles,' which are of wider applicability in an architectural context. The paper introduces orthogonal structures to represent these arrangements and establishes the conditions of well-formedness for these structures. It presents a grammar to enumerate orthogonal structures and suggests that best use is made of the grammar if it is incorporated into a generative expert system, able to serve as a vehicle to discover, encode and utilize a broad range of constraints and criteria in the generation of layout alternatives
keywords	expert systems, architecture, space allocation, floor plans, rectangles, shape grammars, layout
series	CADline
email
last changed	2003/02/26 17:24

_id	896b
authors	Haider, Jawaid
year	1986
title	A Conceptual Framework for Communication -Instruction in Architectural Design
source	Pennsylvania State University
summary	Existing design models, it is generally acknowledged, are inadequate to deal with the complexity of contemporary situations; and an assessment of self-conscious design manifests a slow development in the power and scope of conceptualizing. The quality of knowledge and conceptual tools available to the designer largely determine his ability to conceive and accomplish; conversely, the limitations of method are reflected in design solutions. Some emerging social problem-solving paradigms, which seek to construct a cognitive psychology of problem solving, have a direct relevance to architectural design. Notwithstanding the traditional criticism and scepticism, problem solving is predicated by task environment and problem space as these have a significant impact on design synthesis. Despite a rigorous search for theoretical perspectives and methods, the concern for the quality of the physical environment persists unabated. Historically, architecture has depended on other disciplines for its theoretical insight; but the application of borrowed theories without a viable framework for translation has often resulted in misinterpretation. Aggravating the problem is the art-science controversy which has consequences for architectural practice and education. What is required is a unified approach encompassing the scientific and artistic modes of inquiry. But a unified perspective, involving vast and disparate areas of human knowledge, demands a conceptual framework for integrative learning. The proposed model of this study provides such a framework and calls for a re-examination of the conventional boundaries of design disciplines. It advocates an interdisciplinary approach and recognizes the design process as inherently a learning process; this shifts the emphasis from product to process and allows students to plan and assess their own design/learning experience. While the study focuses on substantive issues, it identifies a strategy for integrative learning applicable within the existing context of design education. Despite its untested nature, the proposed model can become a vehicle for stimulating coordination of all facets of human knowledge and experience toward creative design synthesis. It inculcates a sense of critical assessment of generative ideas by presenting a conceptually clearer picture of the design process to elicit a response to and a better understanding of the task environment of architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	e12d
authors	Johnson, Robert E.
year	1986
title	Micro-computers and Computer Aided Design Instruction
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 173-181
doi	https://doi.org/10.52842/conf.acadia.1986.173
summary	During the past few years we have been involved in a variety of experiments that teach the use of computers to non-computer oriented architecture students. These teaching experiences have led to the development of an experimental, entry-level course in computer-aided architectural design using the Macintosh personal computer. Objectives of this course included: a) to provide an introductory course to students with little or no prior computer experience, b) to use the course as a vehicle for illustrating principles of computer-aided design, c) to course so that it would be applicable to design in general, not just architectural design, and d) whenever possible, to use "off the shelf', generic, readily accessible software. The history of these developments will be presented along with a very preliminary evaluation of results.
series	ACADIA
last changed	2022/06/07 07:52

_id	c2dd
authors	Oxman, Robert
year	1986
title	Towards a New Pedagogy
source	Journal of Architectural Education. Summer, 1986. vol. 39: pp. 22-28 : ill. includes some bibliographical notes
summary	This paper proposes the potential of design studies as a vehicle for the transfer of what might be considered 'architectural knowledge' as compared to 'professional experience.' An analogy with language study is suggested as a means of conveying the distinction between the acquisition of general design knowledge - a knowledge base which is not domain specific - and its application in dealing with ad-hoc problems
keywords	design, knowledge acquisition, education, architecture
series	CADline
last changed	1999/02/12 15:09

_id	c3ca
authors	Rasdorf, William J. and Watson, Bruce R.
year	1986
title	ADI : An Adaptive Database Interface for Dynamic Databases
source	ASME Symposium Proceedings on Knowledge based Expert Systems for Manufacturing. Anaheim, CA: American Society of Mechanical Engineers, Production Engineering Division, December, 1986. pp. 119-130. CADLINE has abstract only
summary	The operation of a manufacturing organization often depends on its underlying design and manufacturing databases. In a manufacturing environment, many users, both individuals and application programs, must have access to one or more of the organization's databases to provide, use, or modify data, to control information flow, and to facilitate information management. Such databases routinely undergo dynamic changes in both their content and their structure. These changes commonly result from the design of new products, the introduction of new materials, and the introduction of new machines and processes on the shop floor. Such continuing changes must be reflected in the database schemas and subsequently require that application programs be updated and that online users be educated on a continuous basis. The problem addressed in this paper is that it is difficult for users and application programs to get the information that they need, when they need it, from the multiple heterogeneous database management system (DBMS) environments that have evolved in design and manufacturing organizations. The solution proposed here is to build a general, extendable interface between database users and the many sources of data available to them. This in itself is not a new suggestion; a number of researchers have addressed portions of this problem. In general, the interfaces that they have developed to date are best suited to environments where the structure of the database is static and does not change over time. One of the things that this paper proposes that is different from existing work is an interface which handles the dynamic restructuring nature of manufacturing databases, enabling a user to obtain the most accurate and up to date information as the structure and content of the underlying databases change. Another unique aspect of the DBMS interface proposed herein is that the interface attempts to capture the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact identity of the required entities that are stored in the database
keywords	engineering, database, manufacturing, user interface
series	CADline
last changed	2003/06/02 10:24

_id	f3aa
authors	Tyler, Sherman William
year	1986
title	SAUCI. Self-Adaptive User Computer Interfaces
source	Carnegie Mellon University,Pittsburgh
summary	Different approaches to the design of the human-computer interface have been taken in the past. These can be organized into four broad categories: tack-on; intuitive/empirical; formal; and conversational. There are several important interface design criteria that have never been adequately attained in any of these approaches. One is modularity, that is, maintaining a clear separation between the interface and its target system. A second criterion is self-adaptation, or the ability of the interface to modify its own behavior to suit a given individual user. Two further criteria relate to the interface's potential to guide users in performing typical high-level tasks on the target system and to provide intelligent advice on the use of that system. This research was focused on developing an integrated technique for achieving these four design criteria. To that end, an abstract architecture called SAUCI, or the Self-Adaptive User-Computer Interface, was proposed, embodying a knowledge-based, object-oriented approach to interface design. The foundation of this approach rests upon information encoded within sets of objects. This information includes separate knowledge bases describing the individual users, the commands of the target system, and the high-level tasks appropriate for that system. The behavior of the interface is controlled by various methods which call upon the knowledge bases in a rule-governed manner to decide what interface features should be present at each phase of the user's dialogue with the target system. To test the feasibility of the proposed architecture, a working interface was implemented on a Xerox 1108 computer in the LOOPS language, with a UNIX operating system running on a separate minicomputer as the target system. An empirical evaluation of this prototype revealed clear advantages over the standard interface. Closer examination pointed to each of the factors of modularity, task guidance, and user-tailored assistance as playing a significant role in these effects. A discussion of additional applications of this architecture and of areas for future development is offered as further evidence of the value of this approach as a general framework for human-computer interface design.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	4c79
authors	Aguilar, Lorenzo
year	1986
title	A Format for a Graphical Communications Protocol
source	IEEE Computer Graphics and Applications vol. 6.no. 3 (March, 1986): pp. 52-62
summary	This article describes the requirements for a graphical format on which a graphical on-line communications protocol can be based. It is argued that on-line graphical communications is similar to graphical session capture, and thus the author proposes an interactive graphical communications format using the GKSM session metafile. The discussion includes items that complement the GKSM metafile such as a format for on-line interactive exchange. One key application area of such a format is multimedia on-line conferencing. Therefore, a conferencing software architecture for processing the proposed format is presented. This format specification is made available to those planning multimedia conferencing systems
keywords	user interface, communication, computer graphics, multimedia, standards
series	CADline
last changed	1999/02/12 15:07

_id	678e
authors	Aish, Robert
year	1986
title	Three-dimensional Input and Visualization
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 68-84
summary	The aim of this chapter is to investigate techniques by which man-computer interaction could be improved, specifically in the context of architectural applications of CAD. In this application the object being designed is often an assembly of defined components. Even if the building is not actually fabricated from such components, it is usually conceptualized in these terms. In a conventional graphics- based CAD system these components are usually represented by graphical icons which are displayed on the graphics screen and arranged by the user. The system described here consists of three- dimensional modelling elements which the user physically assembles to form his design. Unlike conventional architectural models which are static (i.e. cannot be changed by the users) and passive (i.e. cannot be read by a CAD system), this model is both 'user generated' and 'machine readable'. The user can create, edit and view the model by simple, natural modelling activities and without the need to learn complex operating commands often associated with CAD systems. In particular, the user can view the model, altering his viewpoint and focus of attention in a completely natural way. Conventional computer graphics within an associated CAD system are used to represent the detailed geometry which the different three-dimensional icons may represent. In addition, computer graphics are also used to present the output of the performance attributes of the objects being modelled. In the architectural application described in this chapter an energy- balance evaluation is displayed for a building designed using the modelling device. While this system is not intended to offer a completely free-form input facility it can be considered to be a specialist man-machine interface of particular relevance to architects or engineers.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	2ec8
authors	Arditi, Aries and Gillman, Arthur E.
year	1986
title	Computing for the Blind User
source	BYTE Publication Inc. March, 1986. pp. 199-208. includes some reference notes
summary	In this article the authors present some of the human-factors issues specific to non visual personal computing. The authors' concern is with the accuracy, speed, and generality of the blind-user interface, to make computers more accessible and efficient for blind and visually impaired persons
keywords	user interface, disabilities
series	CADline
last changed	2003/06/02 13:58

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6c8e
authors	Barbera, Salvatore and Correnti, Gabriele
year	1986
title	Reticular and Linear Planning of Erecting Yards Aided by Personal Computer
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 157-166
doi	https://doi.org/10.52842/conf.ecaade.1986.157
summary	This study has been carried out during the Course of Ergotecnica Edile hold at the Instituto Dipartimentale di Architettura e Urbanistica of Catania University, and it has been addressed to the students of the Faculty of Civil Engineering (manufacturing and direction of civil works). The present study aims at instructing the students as refers to planning, through computers, erecting yards. Work-planning is specifically important with reference both to the starting program and to the carrying on of the work. Within this context, workplanning is useful as regard the control and contingent correction of the work. In the latter case, divergencies between work-evolution and forecast are of primary value.
series	eCAADe
last changed	2022/06/07 07:54

_id	6002
authors	Barduzzi, Ondina and Pascolo, Carlo
year	1986
title	CAD System (Computer Aided Design) for the Planning of the Territory, with Reference to the Automatical Estimate of Works of Urbanization
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 167-179
doi	https://doi.org/10.52842/conf.ecaade.1986.167
summary	Any applied research, no matter what discipline is concerned, needs affined and suitable tools; as regards the studies in the field of architecture and planning, the use of automatic systems of analysis, data ordering and comparison is of particular interest. The quickness of operations by means of computers and the corresponding graphical representation gives new possibilities for scientific work, once impossible, not certainly because of conceptual limits, but practically, for the limits of available tools. It is the wideness of applications of computers to be pointed out, for although studied for scientific reasons, their practical usefulness is often enormous. This has been generally verified. It guilts in particular for the CAD System, proposed and explained in this paper. The practical utility this and other systems from the same field have for the public administration, contractors and consultants is well known and therefore not necessary to be described further. The use of such systems is particularly convenient in those sectors where the graphical representation is the basic part of the production process.
series	eCAADe
last changed	2022/06/07 07:54

_id	4ed0
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1986
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	xiv, 476 p. : ill. (some col.) Los Altos, California: Morgan Kaufmann Pub. Inc., 1986. Forewords by Pierre Bezier and Robin A. Forrest. Includes bibliography: p. 455-465 and index
summary	Discusses the use of splines from the point of view of the computer scientist concentrating on parametric spline curves and parametric,tensor-product spline surfaces
keywords	splines, theory, computer graphics, computational geometry
series	CADline
last changed	2003/06/02 14:42

_id	aec8
authors	Bellinghall, Leigh
year	1986
title	The MicroCad Explosion : An Eye to Applications Clarifies Choices
source	computer Graphics World March, 1986. vol. 9: pp. 23-28 : col. ill.
summary	Two strong trends affirm increasing market interest in micro systems. While early programs were developed for personal computers, turnkey system houses are now stretching heavy-duty mini and mainframe-hosted programs down to micros. This article gives a selective survey of popular micro-CAD software, looks at packages in both development areas
keywords	drafting, systems, CAD, software, applications
series	CADline
last changed	1999/02/12 15:07

_id	8060
authors	Bentley, Jon L. and Kernighan, Brian W.
year	1986
title	GRAP - a Language for Typesetting Graphs
source	communications of the ACM. August, 1986. vol. 29: pp. 782-792 : charts. includes bibliography
summary	The authors describe a system that makes it easy and convenient to describe graphs and to include them as an integral part of the document formatting process
keywords	programming, computer graphics, algorithms, business
series	CADline
last changed	2003/06/02 10:24

_id	a3bd
authors	Beretta Covacivich, N., loannilli, M., Lazzari, M., Scandurra E. and Schiavoni U.
year	1986
title	Urban Planning Computer Aided Methods
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 180-185
doi	https://doi.org/10.52842/conf.ecaade.1986.180
summary	In the practice of urban centers analysis and of urban planning projects, a noticeable aspect is the absence of some essential information required in the planning process due to the natural difficulty to manage the numerous data to process.
series	eCAADe
last changed	2022/06/07 07:54

For more results click below: