Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 210

Reformat results as: short short into frame detailed detailed into frame

_id	5509
authors	Koutamanis, Alexandros
year	1990
title	Development of a computerized handbook of architectural plans
source	Delft University of Technology
summary	The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	6643
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1986
title	Expert System for Building Design
source	Congress of the International Council for Building Research, Studies and Documentation (10th : 1986 : Washington). vol. 2: pp. 651-658. includes bibliography. -- abstract also in French
summary	At the CABD LAB at the University of Rome, an interactive expert system for architecture is being implemented to supervise building design at every stage of development. The system operates by checking the consistency of design choices against given sets of constraints, and by automatically checking the design process. It is therefore an innovation with respect to current architectural software developed as specific design aids. The system is based on a general representation of building objects (from components to the whole building) by means of semantic nets and a set of inferential procedures. The general representation is developed by making explicit the relational structures according to which architects organize their knowledge about building objects. To do this, the `Frame' formalism is used: this is a knowledge representation technique used in the field of artificial intelligence. It is then shown that such an expert CAAD system is a general purpose tool for architectural design, enabling architects to assess any constraint and/or building attribute by means of a declarative method, which in no way affects their own specific design methodologies
keywords	semantic networks, representation, constraints, expert systems, CAD, building, design process, knowledge, frames
series	CADline
last changed	2003/06/02 13:58

_id	eb6e
authors	Gero, John S.
year	1986
title	Knowledge-Based Design Systems in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1986.x.h1l
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, p. 243
summary	This paper describes continuing research in the Architectural Computing Unit of the University of Sydney on the development of knowledge-based design systems in architecture. It is broken into three parts: (i) antecedents - how did we get here? (ii) the present - where are we? (iii) a future - where might we go from here?
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	682d
authors	Kim, Uk
year	1986
title	Model for an Integrated Design Evaluation System using Knowledge Bases
doi	https://doi.org/10.52842/conf.acadia.1986.204
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 204-215
summary	Computer-aided architectural design (CAAD) systems need to be integrated so that one unified system can generate and do various analysis and evaluation of building models. A data system can not solve this problem because all design concepts can not be stored in the database before the design is completed. As design stage proceeds, design concept and necessary information for analysis and evaluation become complex and detailed. In order to accommodate increasing entities and new relationships between them, knowledge-based systems are integrated into the database of building models. frame structure and production rules are adopted to represent knowledge about the database, and to represent evaluation rules respectively. The system is implemented in Prolog on an Apollo workstation.
series	ACADIA
last changed	2022/06/07 07:52

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	088e
authors	Rosenman, M.A., Gero, J.S. and Oxman, Rivka E.
year	1986
title	An Expert System For Design Codes and Design Rules
source	Berlin: Springer-Verlag, 1986. pp. 745-758
summary	This paper demonstrates applicability of expert systems to design codes and design rules. Design codes and design rules contain knowledge based on experience of accepted practice. Design codes differ from design rules in that their knowledge is written down and available for perusal thus simplifying the knowledge acquisition process. However this knowledge is ill-structured and difficult to use for all but the experts. The paper demonstrates how the expert system shell BUILD may be used to construct expert systems for design codes and rules. Prototypical systems are shown for the Australian Model Uniform Building Code and for use in the preliminary design of kitchens. The examples show how the same knowledge may be used not only in an analysis mode but also in a design synthesis mode
keywords	expert systems, design, codes, applications
series	CADline
email
last changed	2003/06/02 14:41

_id	882b
authors	Rosenman, M.A., Manago, C. and Gero, J.S.
year	1986
title	A Model- based Expert System Shell
source	1986. pp. c:1:15
summary	Rule-based expert systems, despite having demonstrated their usefulness in many circumstances, have been widely attacked for the shallowness of their knowledge. They have no knowledge about the knowledge which they possess and therefore can only be used in a very rigid manner. This paper shows that this meta-knowledge can be extracted from the rule base of an expert system and by producing a model of the artifact(s) described within, extend the functionality of the overall system. One of the benefits of this extended functionality is the ability of the model-based expert system to interface with external systems such as existing CAD systems. This paper describes the development of a general model-based expert system developed in the Department of Architectural Science, University of Sydney. The utility of the approach is shown in an example of the system interfacing with a commercially available CAD system. The CAD system is used to define the features of a building and a rule base dealing with some aspects of building regulations is applied to interpret the database produced by the CAD system
keywords	expert systems, tools, CAD
series	CADline
email
last changed	2003/06/02 14:41

_id	f3aa
authors	Tyler, Sherman William
year	1986
title	SAUCI. Self-Adaptive User Computer Interfaces
source	Carnegie Mellon University,Pittsburgh
summary	Different approaches to the design of the human-computer interface have been taken in the past. These can be organized into four broad categories: tack-on; intuitive/empirical; formal; and conversational. There are several important interface design criteria that have never been adequately attained in any of these approaches. One is modularity, that is, maintaining a clear separation between the interface and its target system. A second criterion is self-adaptation, or the ability of the interface to modify its own behavior to suit a given individual user. Two further criteria relate to the interface's potential to guide users in performing typical high-level tasks on the target system and to provide intelligent advice on the use of that system. This research was focused on developing an integrated technique for achieving these four design criteria. To that end, an abstract architecture called SAUCI, or the Self-Adaptive User-Computer Interface, was proposed, embodying a knowledge-based, object-oriented approach to interface design. The foundation of this approach rests upon information encoded within sets of objects. This information includes separate knowledge bases describing the individual users, the commands of the target system, and the high-level tasks appropriate for that system. The behavior of the interface is controlled by various methods which call upon the knowledge bases in a rule-governed manner to decide what interface features should be present at each phase of the user's dialogue with the target system. To test the feasibility of the proposed architecture, a working interface was implemented on a Xerox 1108 computer in the LOOPS language, with a UNIX operating system running on a separate minicomputer as the target system. An empirical evaluation of this prototype revealed clear advantages over the standard interface. Closer examination pointed to each of the factors of modularity, task guidance, and user-tailored assistance as playing a significant role in these effects. A discussion of additional applications of this architecture and of areas for future development is offered as further evidence of the value of this approach as a general framework for human-computer interface design.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	0f76
authors	Balachandran, M. B. and Gero, John S.
year	1986
title	Knowledge-based Design Optimization
source	IAAI'86 Conference. 1986. pp. i:4:1-14
summary	CADLINE has abstract only. Optimization is a well understood process in design domains. A designer formulates the design problem as a single criterion or multicriteria optimization problem and then selects an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for their solutions. Finally, it runs the selected algorithm(s) and sends the results to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the systems. The basic philosophy and key features of the system are described and are illustrated by examples
keywords	algorithms, expert systems, knowledge base, design, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	e220
authors	Balachandran, M.B. and Gero, John S.
year	1986
title	Formulating and Recognizing Engineering Optimization Problems
source	Aus. Conf Mechs. Struct. and Mats (10th : 1986 : Adelaide) edited by G. Sved. pp. 223-228. CADLINE has abstract only.
summary	In applying optimization methodology to engineering design, a considerable amount of knowledge is utilized to construct and solve mathematical design models. However, computer based systems to assist this process have concentrated mainly on the numeric computational aspects of the process. This paper outlines a computer system which uses a knowledge-based systems approach to formulate and recognize design optimization problems. Areas of expert knowledge involved in mathematical design modeling and optimization are identified. Such knowledge is encoded explicitly in the system. An example is presented
keywords	knowledge base, systems, engineering, design, mathematics, modeling, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	c5af
authors	Bobrow, Daniel G. and Stefik, Mark J.
year	1986
title	Perspective on Artificial Intelligence Programming
source	Science. February, 1986. vol. 231: pp. 951-956
summary	Programming systems for artificial intelligence application use specialized languages, environments, and knowledge-based tools to reduce the complexity of the programming task. Language style based on procedure, objects logic rules, and constraints reflect different models for organizing programs and facilitate program evaluation and understandability. To make programming easier, multiple styles can be integrated as sublanguages in programming environment. Programming environments provide tools that analyze programs and create informative displays of their structure. Programs can be modified by direct interaction with these displays. These tools and languages are helping computer scientists to regain a sense of control over systems that have become increasingly complex
keywords	programming, AI
series	CADline
last changed	2003/06/02 13:58

_id	aa60
authors	Christiansson, Per
year	1986
title	Properties of Future Knowledge Based Systems : The Interactive Consultation System Example
source	computer Aided Architectural Design - Developments in Education and Practice. 1986. 14 p. : ill. includes bibliography
summary	An introduction to knowledge based systems is presented to point out possibilities and limitations of the new software and hardware technology now beginning to be available. A pilot study on the use of an expert system shell (the ES/P Advisor), is briefly discussed. A part of the Swedish concrete building code was implemented in the expert system shell to demonstrate the use of an interactive consultation system. Ideas on how compact video-discs can be used in this type of systems are also put forward
keywords	knowledge base, systems, expert systems, CAD, media
series	CADline
last changed	1999/02/12 15:07

_id	c62d
authors	Davis, Randall
year	1986
title	Knowledge-Based Systems
source	Science February, 1986. vol. 231: pp. 957-963 : ill. includes bibliography.
summary	First developed two decades ago, knowledge-based systems have seen widespread application in recent years. While performance has been a strong focus of attention, building such systems has also expanded our conception of a computer program from a black box providing an answer to something capable of explaining its answers, acquiring new knowledge, and transferring knowledge to students. These abilities derive from distinguishing clearly what the program knows from how that knowledge will be used, making it possible to use the same knowledge in different ways
keywords	AI, knowledge base, systems, theory
series	CADline
last changed	1999/02/12 15:08

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	c52d
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Guildford: Butterworth, 1986. pp. 107-119
summary	This paper introduces the concepts of knowledge engineering, a subset of artificial intelligence. It describes means of representing and manipulating non-numeric design knowledge using symbolic inference mechanisms. It then describes a subset of knowledge engineering--expert systems. Knowledge- based systems in computer-aided architectural design are presented as a new direction for CAAD which expands the role of the computer in design. Expert systems within a CAAD environment are discussed
keywords	AI, knowledge base, design, architecture, CAD, representation, expert systems
series	CADline
email
last changed	2003/06/02 13:58

_id	0354
authors	Goodman, Gary and Reddy, Raj D.
year	1978
title	Alternative Control Structures for Speech Understanding Systems
source	1978 ? [13] p. : ill. includes bibliography Control structures are an essential part of any speech recognition system. They are the devices by which passive knowledge about the task and language is transformed into active and effective processes. In the chapter, three areas of control structures are defined and discussed: knowledge source interaction, knowledge source activation, and knowledge source focusing. Discussion relates the concepts presented to systems developed during the five-year ARPA speech understanding project. speech recognition / systems / control / structures / AI. 64. Goodman, Tim and Keith Unsworth. 'Manipulating Shape and Producing Geometric Continuity in B-spline Curves.' IEEE Computer Graphics and Applications. February, 1986. vol. 6: pp. 50-56 : ill. includes bibliography.
summary	This article examines some of the desirable features of B- splines that make them particularly suitable for computer- aided design. First, a theoretical analysis is presented regarding the effects upon the shape of a design curve when the bias and tension parameters are allowed to vary in certain ways. Second, the concept of geometric continuity is discussed, and conditions are derived upon the control vertices to ensure that the design curve has second-order geometric continuity. Illustrations of B-spline curves are presented to support the theoretical conclusions
keywords	computational geometry, B-splines, curves, CAD
series	CADline
last changed	2003/06/02 13:58

_id	ed11
authors	Kieffer, Bruce D.
year	1986
title	An Interactive CAD Based System Integrating Visual Analysis & Design
doi	https://doi.org/10.52842/conf.acadia.1986.191
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 191-202
summary	The paper describes the development of an enhanced CAD based instructional system specifically focusing on a linkage between the analytical and creative tasks necessary during the early schematic or conceptual design. The first two components of the system are fairly conventional items and include a tutorial and library of six (6) two and three dimensional CAD design files which document the visual and organizational aspects of archetype buildings and spaces. The CAD facility allows a user to selectively highlight and combine for review, various features of a buildings design. This allows its users to literally, "build-up" an understanding of the complexity of factors at work in recognizably good building. The final component to a customized CAD environment allowing users to develop their own designs with the same tools used during analysis of the archetypes. In addition to a description of the system, the paper identifies the effectiveness measures and instructional setting being established for evaluation of the system.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

For more results click below: