Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 196

Reformat results as: short short into frame detailed detailed into frame

_id	a661
authors	Cajati, Claudio and Calandro, Lucia
year	1986
title	Architectural analysis of buildings in order to choice new functional destinations: an application of computer graphics for Faculty of Architecture's students
doi	https://doi.org/10.52842/conf.ecaade.1986.017
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 17-19
summary	The research tries to give a little but meaningful answer to the specific context of the Faculty of Architecture of Naples. Such a context presents a delay of teachers and researchers, in their teaching and researching activity, in beginning the CAAD way. Often the delay is due to a wrong attitude: a too high or too low expectation towards the use of the computer. In such a situation, the chief target of the research is the student of architecture. It is possible and useful to address a clear message, by a simple educational material, just to the student of architecture; not necessarily by producing a software or modifying some existing one, but also applying a given available software to an important architectural question.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	a666
authors	Galle, Per
year	1986
title	Abstraction as a Tool of Automated Floor-Plan Design
source	Environment and Planning B: Planning and Design. 1986. vol. 13: pp. 21-46 : ill. includes bibliography
summary	The automated design of architectural floor plans satisfying given topological and dimensional constraints is a challenging field of research. In this paper ABSTRACTION is pointed out as an important conceptual tool of this field. A critical discussion of existing plan-design methods leads to the conclusion that the potentials of abstraction as a tool have not yet been fully recognized. The rest of the paper is an attempt to improve this situation by suggesting a new approach to automated floor-plan design. Theoretically, design is viewed as a one-to-many relation; a tree whose lines are directed from the root (the problem) towards the leaves (the solutions). Abstraction is viewed as the inverse many-to-one relation. A particular relation of abstraction is defined, such that the intermediate nodes of the tree (between root and leaves) are themselves floor plans, but are less detailed than the solutions. From the study of this concept of abstraction, it is concluded that the design algorithm based on it is likely to have certain useful properties
keywords	layout, automation, design, architecture, floor plans, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	8db7
authors	Gero, John S., Radford, Antony D. and Rosenman, Michael A. (et al)
year	1986
title	Knowledge-based Building Design
source	CIB 86, Advanced Building Technology, Proceedings. 1986. vol. 1: pp. 93-102
summary	CADLINE has abstract only. The use of the right knowledge depends not only on its availability but also on the designer recognizing that it is needed. The great majority of failures in building design and construction come from the non-application of existing, recorded knowledge; the designer either could not find the right information, or never recognized that the existing basis for making design decisions was inadequate in a new context. This paper describes some work towards the development of knowledge-based computer-aided design tools in which the knowledge is explicit, explained and open to modification. The philosophy behind the work is that design is almost always better if it is based on better knowledge, and that knowledge should be linked as closely as possible to the design activity. Rather than rely on a theoretical discussion, the authors make some brief statements about the nature of such knowledge-based systems and then give some working examples from the Architectural Computing Unit in the University of Sydney
keywords	building, knowledge base, design, architecture, CAD
series	CADline
email
last changed	2003/06/02 13:58

_id	c2dd
authors	Oxman, Robert
year	1986
title	Towards a New Pedagogy
source	Journal of Architectural Education. Summer, 1986. vol. 39: pp. 22-28 : ill. includes some bibliographical notes
summary	This paper proposes the potential of design studies as a vehicle for the transfer of what might be considered 'architectural knowledge' as compared to 'professional experience.' An analogy with language study is suggested as a means of conveying the distinction between the acquisition of general design knowledge - a knowledge base which is not domain specific - and its application in dealing with ad-hoc problems
keywords	design, knowledge acquisition, education, architecture
series	CADline
last changed	1999/02/12 15:09

_id	2eb1
authors	Bridges, Alan H.
year	1986
title	Alternative Approaches Towards the Teaching of Computer Aided Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1986.331
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 331-340
summary	The problems of architectural education in general and CAD education in particular are discussed. The paper suggests that the computing requirements of architectural practice are different to those of architectural education and that much of the software used in schools of architecture is not used in an educationally structured way. A number of proposals for the educational use of computers are made, together with recommendations for a common computing environment.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	b25c
authors	Bergeson, Donald E. and Cetin, Randal F.
year	1986
title	ADAM - Architectural Design Applications Model
doi	https://doi.org/10.52842/conf.acadia.1986.037
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 37-54
summary	This paper will describe ADAM, a project to explore the potential for interfacing independent graphics software for the purpose of developing a microcomputer based design system. This system will be implemented in three undergraduate design studios at the University of Illinois (Urbana-Champaign) School of Architecture. The three design studios are part of an experimental project to determine the usefulness of computers in the architectural design curriculum. The concept used throughout the design of this system is: "make use of what already exists, but use it smoothly together in such a way that the management system is totally invisible to the user." Many low- end quality graphics software packages are commercially available. Each has the capacity to address some aspect of the architectural design process, none will do it all . The problem is a lack of compatibility between software. ADAM is a management system designed to invisibly control and interface the use of an assembly of graphics programs and data base management systems to achieve compatibility. Because of these compatible interfaces, new and varied design tools can be created from existing software..
series	ACADIA
last changed	2022/06/07 07:54

_id	c967
authors	Fantacone, Enrico
year	1994
title	Exporting CAD Teaching into Developing Countries
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t3s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 222
summary	In 1986 the Faculty of Architecture was established in Maputo. It is financed by the Italian Ministry of Foreign Affairs and managed by a Scientific Council of the Faculty of Architecture of "Università La Sapienza" of Rome. The need to create human technical resources beeing able to work profesionally as soon as they finish their studies, made the teaching basis for lab exercises and design. The new architects (the first six students graduated in 1991), need to design and make very important decisions without any control by more experienced local technical institutions. The creation of a CAAD laboratory, and the teaching of information technologies and metodologies in architectural designing aimes to achieve a double goal: (-) to make the new architects able to manage on their own, because of the lack of qualified human resources, large quantity of data, and difficult design problems; (-) to make University, the most important scientific center in the country, an information exchange center between developped countries, and Moçambique.
series	eCAADe
last changed	2022/06/07 07:50

_id	2d41
authors	Flemming, Ulrich
year	1986
title	The Role of Shape Grammars in the Analysis and Creation of Designs
source	New York: John Wiley & Sons, 1986. pp. 213-244 : ill. includes bibliography
summary	The paper gives an informal introduction to the shape grammar formalism. It presents results form a case study in which this formalism was applied to a realistic problem in order to convey the flavor of work with such grammars, to demonstrate its advantages and to show that our familiarity with this formalism has now progressed to a level were issues of architectural substance can be addressed. The paper concludes with the outline of a simple way to implement shape grammars by computer: it does not resolve the theoretical problems that exist for such implementations, but makes non-trivial applications like the case study possible
keywords	shape grammars, design, architecture
series	CADline
email
last changed	2003/02/26 17:24

_id	c52d
authors	Gero, John S.
year	1986
title	An Overview of Knowledge Engineering and its Relevance to CAAD
source	Guildford: Butterworth, 1986. pp. 107-119
summary	This paper introduces the concepts of knowledge engineering, a subset of artificial intelligence. It describes means of representing and manipulating non-numeric design knowledge using symbolic inference mechanisms. It then describes a subset of knowledge engineering--expert systems. Knowledge- based systems in computer-aided architectural design are presented as a new direction for CAAD which expands the role of the computer in design. Expert systems within a CAAD environment are discussed
keywords	AI, knowledge base, design, architecture, CAD, representation, expert systems
series	CADline
email
last changed	2003/06/02 13:58

_id	eb7a
authors	Porada, Mikhael
year	1999
title	Virtual Analogy and Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.069
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 69-73
summary	Our fashion of thought is dialogic in its way to use simultaneously logic- mathematics and analogical approaches (Morin, 1986). The analogy works as well at the level of the unconscious by the construction of an analogon that permits us to recognise a face between thousand of others, despite changes intervened in time; as consciously where by an effort of constructive analogy, we establish bridges between different events or domains giving to the design a new lighting that puts it on the way to a solution. For this reason visual approach acquires a great importance in the establishment of similitude in conception. Many testimonies of scientists, philosophers, artists confirm this observation about their creative work, while underlining the danger of no founded analogies. In current life, analogy brings a support of likeness to the daily conversations, and the possibility to advance in the dialogue by a chaining of analogies having for objective to strengthen the speech.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	20a8
authors	Ruffle, Simon
year	1986
title	How Can CAD Provide for the Changing Role of the Architect?
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 197-199
summary	At the RIBA Conference of 1981 entitled 'New Opportunities', and more recently at the 1984 ACA Annual Conference on 'Architects in Competition' there has been talk of marketing, new areas of practice, recapturing areas of practice lost to other professions, more accountability to client and public 'the decline of the mystique of the professional'. It is these issues, rather than technical advances in software and hardware, that will be the prime movers in getting computers into widespread practice in the future. In this chapter we will examine how changing attitudes in the profession might affect three practical issues in computing with which the author has been preoccupied in the past year. We will conclude by considering how, in future, early design stage computing may need to be linked to architectural theory, and, as this is a conference where we are encouraged to be outspoken, we will raise the issue of a computer-based theory of architecture.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	69c7
authors	Woodbury, Robert F.
year	1986
title	VEGA : A Geometric Modelling System
source	11 p. : ill. Engineering Design Research Center, CMU, April 1986. DRC-48-03-87. includes bibliography
summary	VEGA is a program which models rigid solid objects in three dimensions. Specifically, its domain is assemblies of planar faced polyhedra. VEGA supports a variety of operations to create, modify, query and delete these assemblies. VEGA is intended to serve two purposes: that of a new medium of representation for the design process; and of a programming package to support geometric applications in a wide variety of domains. Here the author addresses primarily the first of these purposes, that of a new medium for design. Designers of physical objects use an external medium, traditionally paper or physical models, not only to record their work, but to provide information which assists in the understanding of implications of design decisions. Designers proceed by performing operations, which reflect internal design decisions, on this external medium. The operations used in design are generally reflective of these physical media. For example, models built of clay tend to be formed by a subtractive processes, whereas models built of wood tend to be additive in nature. Designers who use drawings as their medium still tend to use operations which reflect operations on physical models. Computers provide the fascinating potential to provide a much wider variety of operations at a much greater speed than is available with the traditional means of representation. In addition, a computer based representation can provide quantitative information not easily accessible from traditional forms. This opens the potential for the inclusion of formal means of evaluation in the design process; something which is generally almost absent in traditional design teaching. A computer program which effectively and 'naturally' models physical objects and operations on them would be a valuable assistance to both the teaching and practice design. VEGA has been designed with these objectives in mind. VEGA represents physical objects with a scheme known as boundary representation and provides a wide variety of operations on these objects. VEGA also provides means to associate other, non-geometric, information with the objects it represents. VEGA is implemented under the ANDREW system. It communicates to ANDREW through a graphics package, also developed by the author's group. VEGA is intended to serve as a medium for future studio courses in the Architecture, Industrial Design and Arts education
keywords	geometric modeling, solid modeling, CAD, education, assemblies, B-rep, systems
series	CADline
email
last changed	2003/06/02 10:24

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2fc1
authors	Zdepski, M. Stephen and Goldman, Glen
year	1986
title	The Computability of Design
doi	https://doi.org/10.52842/conf.acadia.1986.103
source	ACADIA Workshop ‘86 Proceedings - Houston (Texas - USA) 24-26 October 1986, pp. 103-111
summary	A number of architectural design studios (second, third and fifth year) at the School of Architecture at the New Jersey Institute of Technology have undertaken traditional design problems through the use of IBM-AT microcomputer based CAD/Graphics systems. Utilizing three-dimensional modeling software, color graphics "paint" software, and animation software, the studios integrated the use of computers into the very heart of the core program as the primary means of design, simulation, and evaluation. At the same time, other non-computer based studios engaged in similar (and often identical) design problems. Therefore, the opportunity became available to compare and evaluate both the impact the computer made to the traditional architectural studio and also to the building design itself.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ae5f
authors	Krishnamurti, Ramesh
year	1986
title	Modelling Design Descriptions
source	January, 1986. [5] p. : ill
summary	This paper reports some of the principles that underlie a modelling environment being developed at EdCAAD. It describes research that is part of a larger programme directed at computer-based systems that can accommodate the idiosyncratic nature of design practice, without prescriptions to the form or content of designs. That is, towards developing systems to assist in the design process by enabling designers -via conversations with the machine - to make 'reasonable' statements about design objects; to ask 'reasonable' questions about these objects; and to perform 'reasonable' tasks on these objects. Implicit in the authors' approach is the view that designing is an activity dependent on designers' perceptions of design tasks and their resolution. In the context of computer-aided design, this view of design demands that the crucial element in any machine environment lies in the ability of the machine to accept (partial) descriptions of design objects. Moreover, these descriptions can be manipulated according to some (perhaps unanticipated) criteria that the designer may wish to apply. The authors present a model for intentional descriptions of objects. That is, a description that can be structures so that it can be used to recognize objects and can be compared with other descriptions. Such a description of an object should be organized around entities with associated descriptions, it must be able to represent partial knowledge about an object, and it must accommodate multiple descriptors which can describe the object from different viewpoints. Last, but not least, these descriptions should possess a quality of 'truth' in that they reflect the (factual or otherwise) beliefs held by the designer. One way to treat these descriptions is to regard them as statements that belong to some logical framework
keywords	design process, representation, intentionallity
series	CADline
last changed	1999/02/12 15:08

_id	aba3
authors	Laing, Lamond
year	1986
title	Computers in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1986.071
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 71-77
summary	Throughout Europe there is a rapidly growing volume of initiatives towards integrating computer aids within all aspects of education. In architectural education, the support offered by these initiatives presents a double-edged sword. On the one hand it is gratifying to see the work of almost two decades of CAAD research bearing fruit and the concepts gaining recognition by the profession. On the other hand the resulting pressures on the few individuals with the necessary knowledge to implement the teaching will stretch many to breaking point. Where resources are so limited it is crucial to clarify the needs and objectives and, thereby, more effectively direct resources. These needs will change over time and, in the world of computers, the means are also changing rapidly as hardware and software improves. This paper therefore outlines a scenario which I believe is relevant at this point in time but the background is constantly changing and I offer no apologies for any shift in emphasis since my last presentation of this topic in 1983.
series	eCAADe
last changed	2022/06/07 07:52

_id	1083
authors	Wu, Rui
year	2002
title	Computer Aided Dimensional Control in Building Construction
source	Eindhoven University of Technology
summary	Dimensional control in the building industry can be defined as the operational techniques and activities that are necessary, during the construction process of a building, for the assurance of the defined dimension quality of a building (Hoof, 1986). Efficient and precise dimensional control of buildings under construction is becoming ever more important because of changes in the construction industry. More prefabricated components are used; more regulations appear; newly designed buildings have more complex shapes, and building construction is speeding up. To ensure the predefined dimensional quality, a plan of dimensional control must be designed, on the basis of building drawings and specifications delivered by architects, before the building is constructed. The dimensional control plan must provide site personnel with adequate information on, among others, setting out and assembling building components, which can often be done by means of Total Stations. The essence of designing a dimensional control plan is to find out which points should be used as positioning points, which points should be set out in advance or controlled afterwards, and not to forget why. In an effort to contribute to the improvement of the dimensional control of on-site construction projects, this research tries to capture the knowledge required to design an adequate dimensional control plan and make that knowledge more generally available, and build a digital connection between CAD systems and Total Stations, focusing on prefabricated concrete building structural elements. The instrument developed in this research for capturing of essential dimensional control information and knowledge makes use of Product Data Technology (PDT) and Knowledge Technology (KT). The chosen solution supports the stochastic analysis of optimal positioning points taking account of various sorts of deviations and their mutual relationships. The resulting information model has been written in a standardized information modelling language called UML (Unified Modelling Language). The model has been implemented in a Dimensional Control System (DCS) and applied in the “La Tour” construction project in Apeldoorn, the Netherlands. The DCS provides a digital way to bridge the floor plan design with dimensional control, predict dimensional deviation limits and output the data needed for a Total Station. The case study of “La Tour” tests the UML model and prototype of the DCS. The results prove that direct positioning of objects (by putting reflectors on the objects and using a Total Station and by inputting coordinates extracted and calculated from the AutoCAD drawings) provides higher speed, accuracy and reliability. It also shows a way to (pre)position free form objects in 3D where traditional methods cannot. In conclusion: (1) it seems to be justified to expect that the application of the DCS will contribute to increased confidence in dimensional control and the reduction of costs of failure, which potentially could support the increased use of cheaper construction methods, and will also contribute to the improvement of building design and construction process. (2) the scientific contribution of this research is a first step towards providing dimensional quality in a construction process covered by stochastic dimensional uncertainty, even for positioning of free form objects.
keywords	Construction Management; Constructional Engineering; Computer Applications
series	thesis:PhD
last changed	2003/02/12 22:37

_id	4c79
authors	Aguilar, Lorenzo
year	1986
title	A Format for a Graphical Communications Protocol
source	IEEE Computer Graphics and Applications vol. 6.no. 3 (March, 1986): pp. 52-62
summary	This article describes the requirements for a graphical format on which a graphical on-line communications protocol can be based. It is argued that on-line graphical communications is similar to graphical session capture, and thus the author proposes an interactive graphical communications format using the GKSM session metafile. The discussion includes items that complement the GKSM metafile such as a format for on-line interactive exchange. One key application area of such a format is multimedia on-line conferencing. Therefore, a conferencing software architecture for processing the proposed format is presented. This format specification is made available to those planning multimedia conferencing systems
keywords	user interface, communication, computer graphics, multimedia, standards
series	CADline
last changed	1999/02/12 15:07

For more results click below: