Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 148

Reformat results as: short short into frame detailed detailed into frame

_id	8eb5
authors	Gero, John S. (Conference Chairman and Editor)
year	1987
title	Expert Systems in Computer-Aided Design
source	IFIP WG 5.2 Working Conference on Expert Systems in Computer-Aided Design. proceedings. 1987. 533 p. : ill. Amsterdam: North-Holland, 1987. Also published as a book by North Holland (Amsterdam, 1987)
summary	The aim of the Expert Systems in Computer-Aided Design conference was to provide a forum for the exchange of ideas and experiences related to expert systems in computer-aided design, to present and explore the state-of-the-art of expert systems in computer-aided design, to delineate future directions in both research and practice and to promote further development. Seventeen of the nineteen papers accepted were presented with each presentation followed by a round table discussion. The discussion was taped, transcribed and edited and forms part of this volume. The authors came from seven countries, whilst the attendees represented some thirteen nationalities. There is an implicit structure in the ordering of the papers, commencing with system architectures, representation tools through applications to specific design concerns. These papers demonstrate the wide variety of knowledge engineering tools needed in computer-aided design. It is interesting to observe the progression over these three conferences in the ratio of computer scientists to design researchers amongst the authors. The balance over the period has swung from a predominance of computer scientists to a predominance of design researchers. We are beginning to see knowledge engineering development driven by designers' needs
keywords	CAD, expert systems, AI, design
series	CADline
email
last changed	2003/06/02 13:58

_id	016a
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	A Knowledge-based Approach to Mathematical Design Modeling and Optimization
source	engineering Optimization. 1987. vol. 12: pp. 91-115
summary	Optimization is a well understood process in design domains. Designers formulate their design problems as single criterion or multicriteria optimization problems and then select an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for its solution. Finally, it runs the selected algorithm(s) and sends the results back to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the system. The basic philosophy and key features of the system are described and are illustrated with examples
keywords	structures, algorithms, knowledge base, systems, optimization, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	9583
authors	Brown, Stephen
year	1987
title	Computer-Aided Learning Support for Environmental Design Students Ergonomic Design
source	Proceedings of the Human Factors Society 31st Annual Meeting 1987 pp. 889-893
summary	Intelligent CAD systems could be a useful vehicle for disseminating Human Factors principles among non Human Factors designers. Limitations of current CAD systems are discussed and an experimental system is described. It is suggested that future CAD systems should be less than expert, should be responsive to different learning styles and should employ a variety of electronic media at the user interface.
series	other
last changed	2002/07/07 16:01

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	7767
authors	Danahy, John W.
year	1987
title	Sophisticated Image Rendering in Environmental Design Review Graphics Systems
source	Proceedings of ACM CHI+GI'87 Conference on Human Factors in Computing Systems and Graphics Interface 1987 p.211-217
summary	The Landscape Architecture Programme and the Computer Systems Research Institute at the University of Toronto undertook two studies using advanced rendering tools pioneered in the areas of computer animation and graphic art. Through two professional landscape architectural design studies we explored the potential role and impact of computer simulation in the initial, more creative phases of the design work. Advanced image rendering hardware and software were used to produce high quality computer drawings of design concepts. The techniques employed in this study are unique in their application to environmental design where they dramatically improve the designer's opportunities to simulate realistic images of proposed design alternatives and to consider the visual and spatial implications of such alternatives. The case studies represented in the paper were undertaken for the National Capital Commission in Ottawa, Canada. The first project is an urban design massing study called the "Parliamentary Precinct Study" and the second project is a detailed design of the "Ceremonial Routes" in Ottawa.
keywords	Image Rendering; Design Review; System Specification
series	other
last changed	2002/07/07 16:01

_id	e3a4
authors	Girard, Michael
year	1987
title	Interactive Design of 3D Computer-Animated Legged Animal Motion
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 39-51 : ill. includes bibliography
summary	A visually interactive approach to the design of 3D computer- animated legged animal motion in the context of the PODA computer animation system is presented. The design process entails the interactive specification of parameters that drive a computational model for animal movement. The animator incrementally modifies a framework for establishing desired limb and body motion as well as the constraints imposed by physical dynamics (Newtonian mechanical properties) and temporal restrictions. PODA uses the desired motion and constraints specified by the animator to produce motion through an idealized model of the animal's adaptive dynamic control strategies
keywords	computer graphics, animation
series	CADline
last changed	1999/02/12 15:08

_id	c890
authors	Hutchinson, Peter J., Rosenman, Michael A. and Gero, John S.
year	1987
title	RETWALL : An Expert System for the Selection and Preliminary Design of Earth Retaining Structures
source	Knowledge Based Systems. 1987. vol. 1: pp. 11-23
summary	This paper describes an expert system for the selection and preliminary design of engineering earth retaining structures. It describes the domain and how the knowledge was acquired from textbooks, questionnaires and interviews. Details of the implementation of RETWALL using the expert system shell BUILD are provided as is a full script of a session
keywords	expert systems, knowledge, representation, engineering, applications,knowledge acquisition, software
series	CADline
email
last changed	2003/06/02 13:58

_id	e26f
authors	Kalay, Y. (ed.)
year	1987
title	Computability of Design
source	New York: Wiley & Sons
summary	Computer-aided design (CAD) has promised to transform the art and science of architectural design. Yet, despite some significant achievements in the past 3 decades, it has so far failed to do so. This stimulating volume, derived from a symposium held at SUNY, Buffalo in December 1986, explores the reasons why design is so difficult to support by computational means, and what can be done to alleviate this difficulty. Written by an interdisciplinary panel of experts, it presents a varied and comprehensive view of the ways creative design processes can be modelled. The contributors do not all reach the same conclusions, which makes this book lively reading. Topics are arranged into four parts: constructing models of the design process, the computational representation of design knowledge (including spatial information and implicit design intent), methods for computing the design process as a whole (including mathematical programming, expert systems, and shape grammars), and the integration of CAD with traditional design practices.
series	other
last changed	2003/04/23 15:14

_id	c7e0
id	c7e0
authors	Maria Gabriela Caffarena Celani
year	2002
title	BEYOND ANALYSIS AND REPRESENTATION IN CAD: A NEW COMPUTATIONAL APPROACH TO DESIGN EDUCATION
source	Submitted to the Department of Architecture in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the field of Architecture: Design & Computation at the Massachusetts Institute of Technology
summary	This thesis aims at changing students' attitude towards the use of computer-aided design (CAD) in architecture. It starts from the premise that CAD is used mostly for analysis and representation, and not as a real design aide, and that architecture students have a bias against learning computer programming. For this purpose, a prototypical instruction system that mixes computer-aided design and computational design theory was developed, based on a series of fundamental concepts that are common to both fields. This system was influenced by Mitchell's (1987) The Art of Computer Graphics Programming and Stiny's (1976) shape grammars. Despite being based on solid theoretical foundations, CAD has progressively become an exclusively practical tool, since its origins in the 50's and 60's, while computational design theories have been mostly restricted to the academic circles. This thesis proposes an inversion in the present situation: the study of CAD theory, and the application of computational design into practice. The system proposed provides a conceptual framework that can be adapted to different circumstances, including course formats and resources, as well as students' background and technical training. It is based on seven fundamental concepts from computational design theories that are also important to the study of shape grammars: symmetry, recursion, rule-based compositions, parameterization of shapes, generative systems, algorithmization of design procedures, and shape emergence. These concepts are introduced within a CAD context, where their practical implementation and experimentation are possible, focusing the understanding of the computational nature of design. During this research, the proposed system was tested in two case studies with students from schools that had contrary orientations in terms of the importance of CAD in the architectural curriculum. In these experimental courses, students' activities evolved from using a commercial CAD tool in an innovative way, to the use of programming techniques for creating meaningful tools. Despite not having a statistical reach, the fieldwork allowed drawing preliminary conclusions about the proposed system's efficacy, since virtually all the students reported changing their understanding of the role of CAD in architecture, while some also acknowledged a conceptual influence in other subjects and in the way they see architecture.
keywords	Symmetry
series	thesis:PhD
type	normal paper
email
more	http://www.fec.unicamp.br/~celani/
last changed	2004/11/17 20:51

_id	2e9a
authors	Oxman, Rivka E. and Gero, John S.
year	1987
title	Using an Expert System for Design Diagnosis and Design Synthesis
source	Expert Systems. 1987. vol. 4: pp. 4-15 : ill. includes bibliography
summary	This paper describes the concepts which allow an expert system to be used for both design diagnosis and design synthesis. An example of the implementation of these concepts is presented in the domain of preliminary design of domestic kitchens in the expert system PREDIKT. PREDIKT carries out both design diagnosis and design synthesis using the same knowledge base and utilizes an existing expert system shell which has forward and backward chaining capabilities. The significance of graphical interaction with expert systems in design domains is demonstrated
keywords	synthesis, expert systems, design, evaluation, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	6683
authors	Rasdorf, William J. and Wang, TsoJen E.
year	1987
title	Spike : A Generic Design Standards Processing Expert System
source	Southampton, UK: Computational Mechanics Publications, pp. 241-257. Also published in : Applications of Artificial Intelligence in Engineering International Conference Proceedings (2nd. : 1987 : Boston, MA.)
summary	Standards, codes, and specifications play an important role in the design of buildings, bridges, and other engineering systems. A design configuration must be checked against all standards to ensure that it is acceptable. This process of design conformance checking using standards is often very tedious. The successful automation of conformance checking is one of the components of a comprehensive computer-aided design system. In that past, standards were interpreted and converted into application programs written in procedural programming languages such as FORTRAN. This approach is extremely inflexible and often error-prone. To support a fully automated computer-aided design system, standards must be incorporated into the design process in a more generic and flexible manner. This paper investigates the feasibility of alternatively casting standards in a form suitable for processing in a knowledge-based expert system environment. The emergence of expert systems from artificial intelligence research has provided a technology that readily lends itself to the automation of design standards. Knowledge-based expert systems have become a powerful tool in tackling domains like design where some of the problem-solving knowledge is diverse and ill-structured. Using an expert system tool, a standard can be represented and processed independent of a CAD application program. Two prototype standards processing systems utilizing the production system approach have been constructed and are presented herein. Although the obvious direct translation casting the provisions of a standard as rules in a production system has its advantages, a more generic and flexible representation scheme is proposed herein. The approach advocated in this paper is to represent standards as databases of facts which can be readily and generically processed by an expert system. The database representation is derived from a unified view of standards obtained by using the standards modeling tools proposed by previous researchers in this field during the past decade. Building on this existing technology resulted in a knowledge- based standards processing architecture which is generic, modular, and flexible. An implementation of this architecture is presented and described
keywords	standards, civil engineering, expert systems
series	CADline
last changed	2003/06/02 13:58

_id	66e5
authors	Rasdorf, William J. and Wang, TsoJen E.
year	1987
title	Generic Design Standards Processing in a Knowledge-based expert system Environment
source	Design Process, National Science Foundation Workshop Proceedings. 1987. pp. 267-291. CADLINE has abstract only
summary	Standards, codes, and specifications play an important role in the design of buildings, bridges, and other engineering systems. A design configuration must be checked against all standards to ensure that it is acceptable. This process of design conformance checking using standards is often very tedious. The successful automation of conformance checking is one of the components of a comprehensive computer-aided design system. In the past, standards were interpreted and converted into application program written in procedural programming languages such as FORTRAN. This approach is extremely inflexible and often error prone. To support a fully automated computer-aided design system, standards must be incorporated into the design process in a more generic and flexible manner. This paper investigates the feasibility of alternatively casting standards in a form suitable for processing in a knowledge-based expert system environment. The emergence of expert systems from artificial intelligence research has provided a technology that readily lends itself to the automation of design standards. Knowledge-based expert systems have become a powerful tool in tackling domains like design where some of the problem-solving knowledge is diverse and ill-structured. Using an expert system tool, a standard can be represented and processed independent of a CAD application program. Two prototype standards processing systems utilizing the production system approach have been constructed and are presented herein. Although the obvious direct translation casting the provisions of a standard as rules in a production system has its advantages, a more generic and flexible representation scheme is proposed herein. The approach advocated in this paper is to represent standards as databases of facts which can be readily and generically processed by an expert system. The database representation is derived from a unified view of standards obtained by using the standards modeling tools proposed by previous researchers in this field during the past decade. Building on this existing technology resulted in a knowledge- based standards processing architecture which is generic, modular, and flexible. An implementation of this architecture is presented and described
keywords	knowledge base, standards, expert systems, civil engineering
series	CADline
last changed	2003/06/02 13:58

_id	4910
authors	Rasdorf, William J. and Watson, Bruce R.
year	1987
title	A Knowledge-Based Approach to Engineering Information Retrieval and Management
source	London, UK: Chapman and Hall Ltd., 1987. pp. 267-295
summary	Building design, construction, operation, maintenance, and control are all processes that have achieved various levels of computer use. Although the degree of computerization varies significantly, one common aspect of the computing needs of each process is an abundance of data in the form of tables, standards, project definition information, catalogs, etc. In most cases this data is stored in files which are independently used for input to stand-alone single-process application programs, such as a structural analysis application. The utility of these independent files is therefore limited to a single application. As concepts of integration of engineering applications evolved, the use of databases and database management systems (DBMS) increased. A number of issues of significant concern emerged. First, there is a need to retrieve data from many independent, possibly widely distributed databases. Second, there is a need for a uniform means of doing so. Third, such databases routinely undergo dynamic change. Changes in a database schema commonly result from the evolution of a design, from changes in the design process itself, and from changes in other subsequent downstream processes. Such continuing changes must be reflected in the database schemas and they subsequently require that application programs be updated and that online users be educated on a continuing basis. This chapter describes a knowledge-based expert system that provides access to and integration of the many underlying databases needed to support the building design/construction process. The unique aspect of the expert system presented in this chapter is its capture of the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS to retrieve data. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact name by which it is stored in the database. In doing so it formalizes the levels of complexity of that knowledge and points out the multidisciplinary applications of the research results
keywords	civil engineering, knowledge base, database, expert systems
series	CADline
last changed	2003/06/02 10:24

_id	ee8f
authors	Rasdorf, William J.
year	1987
title	Extending Database Management Systems for Engineering Applications
source	Computers in Mechanical Engineering (CIME). American Society of Mechanical Engineers, March, 1987. vol. 5: pp. 62-69
summary	During the design of a manufactured component, large amounts of information pertaining to all aspects of the design must be stored, accessed, and operated upon. A database management system (DBMS), composed of a central repository of data and the associated software for controlling accesses to it and operations on it, provides one way to uniformly store, manage, and use this information. This paper presents a framework for an extension to relational database management systems that combines a set of engineering constraints with a database of engineering data items. The representation requires a database that is able to store all of the data normally associated with engineering design as well as the constraints imposed upon the engineering design process. A powerful and flexible constraint processing system is needed to adequately ensure that engineering data conforms to the limitations imposed upon it by the design process. Such a system must be capable of allowing constraints to be invoked at a variety of times, and provide numerous options for the user when violations are detected. This paper introduces a concept called structured constraints that integrates state- of-the-art advances in DBMSs and current research in engineering constraint processing to further enhance CAD system capabilities. It discusses the extensions to relational database theory that are needed to achieve such a constraint handling capability for mechanical engineering applications. The goal sought is a managed repository of data supporting interfaces to a wide variety of application programs and supporting processing capabilities for maintaining data integrity by incorporating engineering constraints. The Structured Constraint model is a general method for classifying semantic integrity constraints. It is based on the structure of the relational model and is therefore independent of any particular query language. In addition, it is a formalism that possesses conceptual clarity and generality which make it useful for representing and communicating arbitrary constraints. The key contribution of this formalism is its basis for a completely definable implementation of an engineering integrity system
keywords	civil engineering, relational database, constraints management, management, DBMS
series	CADline
last changed	2003/06/02 10:24

_id	aef1
authors	Rosenman, M.A., Gero, J.S. and Coyne, R.D. (et al)
year	1987
title	SOLAREXPERT : A Prototype Expert System for Passive Solar Energy Design in Housing
source	Canberra: Aust NZ Solar Energy Society, 1987. vol.II: pp. 361-370. Also published in People and Technology - Sun, Climate and Building, edited by V. Szokolay, Univ. of Queensland, Brisbane, 1988
summary	Passive solar energy design is not an exact science in which a set of analytical procedures can be followed to produce results. Rather it depends heavily on subjective parameters and experience collected over time which is heuristic by nature. At present this knowledge is available in books but while this knowledge is comprehensive, it is unstructured and not always easy to make use of. A computer-based system allows for flexible interactive dialogue and for the incorporation of analytical procedures which may be required. This paper describes work on SOLAREXPERT, a prototype expert system to aid designers in passive solar energy design for single dwellings. The system operates at a strategic level to provide basic advice on the form of construction and types of passive solar systems and at a spatial zone level to provide more detailed advice on sizes and materials. It allows for modification of the information entered so that users may explore several possibilities
keywords	applications, experience, housing, expert systems, energy, design, architecture
series	CADline
email
last changed	2003/05/17 10:17

_id	2fac
authors	Schmitt, Gerhard
year	1987
title	ARCHPLAN - An Architectural Planning Front End to Engineering Design Expert Systems
source	ii, 22 p. : ill
summary	Engineering Design Research Center, CMU, 1987. EDRC-48-04-87. ARCHPLAN is a knowledge-based ARCHitectural PLANning front end to a set of vertically integrated engineering expert systems. ARCHPLAN is part of a larger project to explore the principles of parallel operation of expert systems in an Integrated Building Design Environment. It is designed toÔ h)000*°° ÔŒ operate in conjunction with HIRISE, a structural design expert system; with CORE and SPACER, two expert systems for the spatial layout of buildings; and with other knowledge based systems dealing with construction planning, specification, and foundation design. ARCHPLAN operates either in connection with these expert systems or as a stand- alone program. It consists of three major parts: the application, the user interface, and the graphics package
keywords	The application offers a knowledge based approach towards the
series	CADline
last changed	1999/02/12 15:09

_id	8e6f
authors	Wilcox, R. Peter
year	1987
title	Interactive Color Theory - Education, Research and Practice: The Development of CoMoS3
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 77-86
doi	https://doi.org/10.52842/conf.acadia.1987.077
summary	This paper describes one way to integrate the computer into architectural color research, teaching, and practice. In my work with the Architecture and Interior Architecture programs at the University of Oregon, I am currently developing software exploiting the full three-dimensional and dynamic nature of the Munsell color organization, thereby making it easier for students to learn and apply color theory. CoMoS3 provides an interactive means of understanding and exploring color relationships from within the Munsell system of organization, employing the Munsell harmonies essentially as both a theoretical datum and an interactive "mentor" for color studies. In describing CoMoS3, Color Modelling System in 3D, this paper proposes a method for the integration of computers into one of the more creative and subjective aspects of architectural education and practice. The paper also discusses the problems inherent in this approach and suggests directions for future work.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	sigradi2013_234
id	sigradi2013_234
authors	Alencar, Viviane; Gabriela Celani
year	2013
title	The Art of Computer Graphics Programming: Translating Pioneer Programs
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 500 - 504
summary	Considering the importance of the use of programming languages for teaching computational design to architects, this paper proposes the translation of computer programs from a pioneer work in this field into a more contemporary programming language. The book The Art of Computer Graphics Programming: A Structured Introduction for Architects and Designers was published in 1987 by William J. Mitchell, Robin Ligget and Thomas Kvan, and remains an important reference for architects. The original Pascal codes in the book were translated into Processing, and made available through an Internet website, along with images and comments, in order to give late Prof. Mitchell’s work the consideration it deserves.
keywords	Processing; Pascal; Computer graphics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	266d
authors	Badler, Norman I., Manoochehri, Kamran H. and Walters, Graham
year	1987
title	Articulated Figure Positioning by Multiple Constraints
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 28-38 : ill. Includes bibliography
summary	A problem that arises in positioning an articulated figures is the solution of 3D joint positions (kinematics), when joint angles are given. If more than one such goal is to be achieved, the problem is often solved interactively by positioning or solving one component of the linkage, then adjusting another, then redoing the first, and so on. This iterative process is slow and tedious. The authors present a method that automatically solves multiple simultaneous joint position goals. The user interface offers a six-degree-of freedom input device to specify joint angles and goal positions interactively. Examples are used to demonstrate the power and efficiency of this method for key-position animation
keywords	animation, constraints, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	a60d
authors	Bairstow, Jeffrey N.
year	1987
title	Personal Workstations Redefine Desktop Computing
source	high Technology. March, 1987. pp. 18-23 : ill. includes bibliography: p. 64
summary	Becoming an essential tool in any creative activity, the personal workstations were successfully adopted by software developers for designing both system and application software, by electronics engineers for computer-aided design, and by a wide range of businesses for technical publishing. The rapid adoption of networking and file standards by the workstation manufacturers will undoubtedly put them in a good position to install large networks of both PCs and workstations linked to existing corporate mainframe computers
keywords	hardware, technology, business
series	CADline
last changed	2003/06/02 13:58

For more results click below: