Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 169

Reformat results as: short short into frame detailed detailed into frame

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	e290
authors	Kalay, Yehuda E.
year	1987
title	Worldview : An Integrated Geometric Modeling/Drafting System
source	IEEE Computer Graphics and Applications. February, 1987. vol. 7: pp. 36-46 : ill. (some col.). includes bibliography
summary	Worldview is a computer-aided architectural and engineering design system that combines the power of geometric modeling utilities with the intuitive design and communication capabilities of drafting utilities. This article describes the basic design concepts and implementation of the system, achieved by representing the designed artifact nonredundantly in a three-dimensional 'world' and manipulating it through multiple two-dimensional 'views.' The world consists of a collection of shapes that store all the formative information pertinent to the designed artifact, while the views consist of images of selected shapes, generated through particular two-way mapping transforms. Several views that depict the same set of shapes through different transforms can be displayed simultaneously, using multiple, dynamic, user- defined windows, thereby enabling addressability of points in the 3D world. Views also include such design and communication aids as dimension lines, construction lines, annotations, and graphic symbols to enhance the visual content of the images without encumbering the representation of the shapes themselves. Modifications applied to the shapes through any view are immediately apparent in all other views in which the shapes are imaged. The shapes are represented by a data structure based on the Hybrid Edge data model, which facilitates the integration of points, lines, surfaces, and volumetric bodies into one formative hierarchy. The integration of drafting and modeling simplifies the use of powerful modeling utilities by designers, facilitates the communication of the designed artifact, and enhances the integrity of the design as a whole
keywords	drafting, systems, geometric modeling, representation, user interface, computer graphics, CAD, architecture, engineering
series	CADline
email
last changed	2003/06/02 10:24

_id	8eb4
authors	Athithan, G. and Patnaik, L.M.
year	1987
title	Geometric Searching In Extended CSG Models : Application to Solid Modeling and Viewing
source	February, 1987. 30 p. : ill
summary	In this paper, the CSG representation scheme is augmented with the 'cartesian product.' The sweep method of generating solids is encompassed by this 'Extended CSG' formalism. The point inclusion problem encountered in the area of geometric searching in computational geometry is discussed in the context to solid models represented by 'extended CSG.' A simple algorithm to solve it that has a time complexity O(n), where n is the number of primitives, is presented. Allowing for preprocessing and extra storage, a second efficient algorithm, having a time complexity O(log n), is developed. The relevance of point inclusion problem in solid modelling techniques is indicated. An extended CSG based solid modeling method is proposed. A solution to the problem of hidden line removal, that uses the faster algorithm for the point inclusion problem, is also presented in the paper
keywords	point inclusion, computational geometry, data structures, solid modeling, CSG, computer graphics, hidden lines
series	CADline
last changed	2003/06/02 14:41

_id	2832
authors	Baraniak, David W.
year	1987
title	Automatic Data Capture: Scanners Offer a Cost-effective Solution
source	computer Graphics World November, 1987. vol. 10: pp. 93-94, 97 : ill.
summary	table. In order to decide whether today's scanner deliver the price and performance a particular CAAD application demand, the author lists vendors, scanner type, raster to vector conversion editing raster vector, data exchange format and compares them
keywords	hardware, CAD, scanning, business
series	CADline
last changed	2003/06/02 13:58

_id	963b
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1987
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	Morgan Kaufmann Publishers, Los Altos, CA
summary	The most basic output primitives in every computer graphics library are "lineSegment()" and "Polygon()", ortheir equivalents. These are, of course, sufficent in the sense that any curved line or surface can be arbitrarrily well approximated by straight line segments or planar polygons, but in many contexts that is not enough. Such approximations often require large amounts of data to obtain satifactory smoothness, and they are awkward to manipulate. Then too, even with the the most sophisticated continous shading models, polygonaltechniques can resultin visually ojectionable images. Mach bands may be apparent at the borders between adjacent polygons, and there is always a telltale angularity to polygonal silhouettes. Hence many modeling systems are augmented by circles, spheres, cylinders, etc. and allow such simple primitives to be combined to form quite complex objects.
series	other
last changed	2003/04/23 15:14

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	a537
authors	Bijl, Aart
year	1987
title	Strategies for CAD
source	Eurographics '87. 1987. (16) p. : ill. includes bibliography
summary	Assumptions for CAD are discussed, pointing to a distinction between human knowledge and machine representations of knowledge. Implications for future useful CAD systems are considered. A strategy for 'mechanistic' symbol processors is presented, employing 'mechanisms' of formal logic to manipulate written and drawn expressions of designers' knowledge
keywords	CAD, representation, knowledge, engineering, data structures, intelligence, logic, semantic networks, symbols, drawings, design
series	CADline
last changed	1999/02/12 15:07

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	0518
authors	Degelman, Larry O. and Miranda, Valerian
year	1987
title	Development of Interfaces for CAD Processing in Architecture
doi	https://doi.org/10.52842/conf.acadia.1987.095
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 95-104
summary	Substantial efforts within Europe and Japan, as well as the U.S., have been placed on automating construction processes within the building industry, while lesser efforts have been focused on computer integration in the design processes. This paper addresses the design end of the design/build spectrum and how this subject is approached in the educational and research programs at Texas A&M University. The problems of fragmentation and incompatibility of existing software data bases for building design are recognized as being the major drawbacks to significant progress in Computer-Aided Design. This is followed by a description of proposed models for future interfaces and communications linkages necessary for successful computer integration in the building design process. Efforts in the area of CAD development are undertaken within the "computers in architecture" emphasis area in the PhD program at this university and are targeted at resolution of the CAD interface problems. This happens in both the teaching and research programs. Initially, the communication problems between the building design team and the building systems software are being approached through a PhD-level course in software development for building design problems. In this context, the non-graphical aspects of CAD are being addressed through the development of user friendly, tutorial- type software. Longer range research objectives are directed at the special three-way interfaces between the (1) Design Team, (2) Graphics Handler, and (3) Analytical Engine, and the linkages of these to the Common Data Base.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	224d
authors	Fiebrich, Rolf-Dieter
year	1987
title	The Connection Machine : A General Purpose Accelerator for VLSI CAD
source	COMPCON 87. IEEE Computer Society, Spring, 1987. pp. 211-214 : ill. includes a short bibliography
summary	This paper first summarizes the implementation of several computation-intensive CAD algorithms on the Connection Machine, a massively parallel computer. It then discusses parallel operations of a memory resident design data base currently under development. This data base is the central component to which all CAD tools interface. Substantial speedups are obtained for tasks like simulation and placement as well as database operations. Highly interactive capabilities further shorten the design cycle
keywords	CAD, algorithms, database, architecture, parallel processing, programming, geometric modeling, integrated circuits, design, electrical engineering, CAE
series	CADline
last changed	1999/02/12 15:08

_id	448b
authors	Gerzso, Miguel J.
year	1987
title	On the Reasons for Designing an Object Based Language Called TM
source	1987. 7 p. : ill. includes bibliography
summary	One of the most basic problems in attempting to use computers for architectural applications has been the generation of design alternatives. In order to approach this problem, it is claimed in the paper that in reality it is two basic problems: a methodological problem and a data and procedural representation problem. Diagrammatic Production Rules (DPR's), developed previously by the author, have been proposed for dealing with methodological problem and TM, an object based language, is proposed in the paper for dealing with the data and procedural representation problem. An example of a DPR and a 'program' in TM are included to illustrate the relationship between the two
keywords	languages, representation, OOPS, CAD, applications, programming, architecture, synthesis, design
series	CADline
last changed	2003/06/02 13:58

_id	c7ac
authors	Hardwick, Martin and Spooner, David L.
year	1987
title	Comparison of Some Data Models for Engineering Objects
source	IEEE Computer Graphics and Applications. March, 1987. vol. 7: pp. 56-66 : ill. includes bibliography
summary	Many proposals using object-oriented data models for engineering objects have appeared in the literature. These data models try to represent the data in engineering systems more naturally by organizing it logically and/or physically into objects relevant to the engineering applications using the database. The article reviews and examines several of these proposed data models to identify important properties of the models. It shows that none of the data models excels in all areas, but each has desirable properties
keywords	objects, CAD, design, database, representation, modeling
series	CADline
last changed	2003/06/02 13:58

_id	630c
authors	Harel, David
year	1987
title	Algorithmics: the Spirit of Computing
source	x, 425 p. : ill. Reading, Mass.: Addison Wesley Pub. Co., 1987. include bibliography: p. 357-403 and index
summary	The preliminary chapters discuss the concept of an algorithmic problem and the algorithm that solves it. Discussions of the structure of algorithms, the data they manipulate and the languages in which they are programmed. Part two of the book turns to some general methods and paradigms for algorithmic design. Part three of the book is devoted to the inherent limitations of effectively executable algorithms and hence of the computers that implement them
keywords	algorithms, programming
series	CADline
last changed	1999/02/12 15:08

_id	6b87
authors	Hess, Georg
year	1987
title	Electronic Messaging - Message-Handling: The Key to Worldwide Electronic Communication
doi	https://doi.org/10.52842/conf.ecaade.1987.x.k0w
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	The working performance of computers and of numerous online-services today are being decentralized and used in networks. The interpersonal exchange of messages and hence electronic mailflow from one computer to another is gaining an increasing significance with the growth of the numbers of PCs being used. At the same time, new low-cost forms of organization and communications are being created. Message Handling as the term for the exchange of locally independent messages and news goes, is being introduced to the individual working place on a worldwide scale with the powerful PTT-Data Packet Switching Networks and the new communications protocols like the X.400 as well as the public electronic mail servers, which are available via telephone.
series	eCAADe
last changed	2022/06/07 07:50

_id	8385
authors	Holtz, Neal M. and Rasdorf, William J.
year	1988
title	An Evaluation of Programming Languages and Language Features for Engineering Software Development
source	International Journal of Engineering with Computers. Springer-Verlag, 1988. vol. 3: pp. 183-199
summary	Also published as 'Procedural Programming Languages for the Development of CAD and CAE Systems Software,' in the proceedings of ASME International Conference on Computers in Engineering (1987 : New York, NY). The scope of engineering software has increased dramatically in the past decade. In its early years, most engineering applications were concerned solely with solving difficult numerical problems, and little attention was paid to man- machine interaction, to data management, or to integrated software systems. Now computers solve a much wider variety of problems, including those in which numerical computations are less predominant. In addition, completely new areas of engineering applications such as artificial intelligence have recently emerged. It is well recognized that the particular programming language used to develop an engineering application can dramatically affect the development cost, operating cost. reliability, and usability of the resulting software. With the increase in the variety, functionality, and complexity of engineering software, with its more widespread use, and with its increasing importance, more attention must be paid to programming language suitability so that rational decisions regarding language selection may be made. It is important that professional engineers be aware of the issues addressed in this paper, for it is they who must design, acquire, and use applications software, as well as occasionally develop or manage its development. This paper addresses the need for engineers to possess a working knowledge of the fundamentals of computer programming languages. In pursuit of this, the paper briefly reviews the history of four well known programming languages. It then attempts to identify and to look critically at the attributes of programming languages that significantly affect the production of engineering software. The four procedural programming languages chosen for review are those intended for scientific and general purpose programming, FORTRAN 77, C, Pascal, and Modula-2. These languages are compared and some general observations are made. As it is felt important that professional engineers should be able to make informed decisions about programming language selection, the emphasis throughout this paper is on a methodology of evaluation of programming languages. Choosing an appropriate language can be a complex task and many factors must be considered. Consequently, fundamentals are stressed
keywords	programming, engineering, languages, software, management, evaluation, FORTRAN, C, PASCAL, MODULA-2, CAD, CAE
series	CADline
last changed	2003/06/02 13:58

_id	af13
authors	Kennedy, Michael
year	1987
title	The Initial Start: Beginning CAADD for the Brand New Student
doi	https://doi.org/10.52842/conf.acadia.1987.065
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 65-76
summary	Described is a teaching system presently being used during the first five weeks of a first course in Computer Aided Architectural Design and Drafting (After these five weeks students spend eleven weeks actively using a 2-D drafting package and a 3-D surface modeling package). It is the view of the author that a student can obtain much more from her or his first course in CAADD if some fundamental concepts are covered specifically and dramatically, rather than assumed or conveyed by osmosis. On the other hand, one does not want to significantly delay the teaching of he principal objective: how to use a computer as a partner in design and production. The answer to meeting these two divergent objectives is two-fold: (1) careful organization with computer based tutorials, and (2) integration of architectonic lessons during the introduction. The objectives of he initial five weeks are (1) to demystify computers, (2) teach the fundamental concepts of computer systems relating to hardware (disks, cpu, memory, display), and software (programs, data, files), (3) illustrate programming and program design, and (4) convey the concept of discrete symbol manipulation and its relation to graphics and text.
series	ACADIA
last changed	2022/06/07 07:52

_id	e8bb
authors	Lehto, M.
year	1988
title	Optical Discs - Their Application in Mass Data Storage
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 189-198
summary	Much of the building designer's time is taken up correlating the various sources of information so as to incorporate it in the design within a limited time span. The building information service should be able to provide him or her by the up-to-date information in a user friendly format. Optical disc technology makes it possible to combine different forms of building data into images which can be mass stored and randomly accessed on a single disc, with the minimal response time by personal computer or CAD- workstation. In this paper the use of various forms of optical disc technology in construction industry and the prototype video disc produced by VTT are described.
keywords	Construction, Optical Discs, Interactive Video Disc, Mass Storage
series	CAAD Futures
last changed	1999/04/03 17:58

_id	4109
authors	Li, Shu-Xiang and Leow, Murray H.
year	1987
title	The Quadcode and its Arithmetic
source	Communications of the ACM. July, 1987. vol. 30: pp. 621-626 : ill. includes bibliography
summary	The quadcode is a hierarchical data structure for describing digital images. It has the following properties: (1) straightforward representation of dimension, size, and the relationship between an image and its subsets; (2) explicit description of geometric properties, such as location, distance, and adjacency; and (3) ease of conversion from and to raster representation. The quadcode has applications to computer graphics and image processing because of its ability to focus on selected subsets of the data and to allow utilization of multiple resolutions in different parts of the image. A related approach is the quadtree. Samet recently presented a thorough survey of the literature in that field. Gargantini and Abel and Smith presented linear quadtrees and linear locational keys that are efficient labeling techniques for quadtrees. In those papers the geometric concepts of the image are discussed by using the tree as an interpretive medium, and the approaches and procedures are based on traversal of the nodes in the tree. In this paper the authors present the quadcode system, which is a direct description of the image, and discuss the geometric concepts in terms of the coded images themselves
keywords	quadtree, image processing, representation, computer graphics, search
series	CADline
last changed	2003/06/02 13:58

_id	0a9c
authors	Ozel, Filiz
year	1987
title	The Computer Model "BGRAF": A Cognitive Approach to Emergency Egress Simulation
source	University of Michigan
summary	During the past decade, fire safety researchers have come to the understanding that human factors in fires play an important role in controlling the spread of fire; and in decreasing the number of fire casualties in buildings. With the current developments in computer technology, computer modeling of human behavior in fires emerged as an effective method of research. Such computer modeling techniques offered the advantage of being able to experiment with hypothetical fires in buildings without Note endangering human life. Consequently, a study to develop a computer model that will simulate the emergency egress behavior of people in fires was undertaken. Changes in the information processing capacity of the individual as a result of time pressure and stress was considered as part of the emergency egress decision process. Theories from environmental psychology identified a range of cognitive factors, such as visual access in buildings, architectural differentiation, signage and plan configuration that affect way finding and route selection in buildings. These factors needed to be incorporated into emergency egress models. The model was based on the integrated building data base of the CAD system developed at the University of Michigan, Architecture and Planning Lab., which provided a comprehensive building definition, and allowed both graphic and tabular output. Two actual fire incidences were simulated as part of the validation study. These studies have stressed the importance of the cognitive aspects of the physical environment as a factor in emergency egress. A goal structure that represented the total decision process during fires was incorporated into the model. This structure allowed the inputting and testing of a variety of goal structures by using actions as model blocks. The objectives of the model developed in this study can best be summarized as to study and eventually to predict the route selection and exiting behavior in fires, with the purpose of using such information in making building design and code development decisions, and in suggesting action sequences that will best support the safety of the occupants of a building under different emergency conditions.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: