Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 171

Reformat results as: short short into frame detailed detailed into frame

_id	2ac0
authors	Galle, Per
year	1987
title	A Formalized Concept of Sketching in Automated Floor Plan Design
source	177 p. 1987. DIKO Research Report No.87/3
summary	CADLINE has abstract only. Automated floor plan design, though originally motivated by the difficulties encountered by architects manually designing building layouts, raise several questions that may be of relevance to related application areas as well. e.g. design of electronic circuitry. One such question is, 'how do we come from a given set of constraints on size and placement of rooms (components) to a set of floor plans (circuit layouts) that satisfy these constraints?' In manual architectural design, sketches are used as an intermediate step. The present work is a study of a number of formalizations of the sketch concept which have been or could be used in computer- generation of architectural floor plans. A particular type of sketch, called the 'delta-derivative', is suggested and developed. The delta-derivative of a desired solution plan is an approximation of that solution plan and usually several other similar or 'equivalent' solutions. The idea is to generate sketches ('abstract' plans) before solutions ('concrete' plans), because they are simpler to compute, weeding out sketches that are not 'promising', and trying to refine the remaining sketches into solutions proper, thus limiting the amount of combinatorial search. Several abstraction levels of sketches may be used in this process. However, constraints as specified by the user of an automated design system are assumed to apply to the solutions; therefore a major theoretical problem which is addressed in the report is the derivation of sketch-level constraints that define which sketches to be generated. A comprehensive floor plan design system based on these ideas has been implemented, and empirical results are reported which confirms certain predicted advantages of delta-derivatives but also shows that the sketch-level constraints based on the developed theory are too weak if used alone; they allow generation of too many sketches which cannot possibly be refined into solutions. The report finally conjectures a solution to this problem
keywords	CAD, planning, architecture, floor plans, design, combinatorics, programming, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	e820
authors	Armstrong, W.W., Green, M. and Lake, R.
year	1987
title	Near- Real-Time Control of Human Figure Models
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 52-60 : ill
summary	Includes bibliography. Animating human figures is one of the major problems in computer animation. A recent approach is the use of dynamic analysis to compute the movement of a human figure, given the forces and torques operating within and upon the body. One of the problems with this technique is computing the forces and torques required for particular motions: this has been called the control problem of dynamic analysis. To develop a better understanding of this problem, an interactive interface to a dynamics package has been produced. This interface, along with a collection of low-level motion processes, can be used to control the motion of a human figure model. This article describes both the user interface and the motion processes, along with experiences with this approach
keywords	computer graphics, animation, user interface
series	CADline
last changed	2003/06/02 14:41

_id	266d
authors	Badler, Norman I., Manoochehri, Kamran H. and Walters, Graham
year	1987
title	Articulated Figure Positioning by Multiple Constraints
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 28-38 : ill. Includes bibliography
summary	A problem that arises in positioning an articulated figures is the solution of 3D joint positions (kinematics), when joint angles are given. If more than one such goal is to be achieved, the problem is often solved interactively by positioning or solving one component of the linkage, then adjusting another, then redoing the first, and so on. This iterative process is slow and tedious. The authors present a method that automatically solves multiple simultaneous joint position goals. The user interface offers a six-degree-of freedom input device to specify joint angles and goal positions interactively. Examples are used to demonstrate the power and efficiency of this method for key-position animation
keywords	animation, constraints, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	08a1
authors	Balachandran, M.B. and Gero, John S.
year	1987
title	A Knowledge-based Graphical Interface for Structural Design
source	Southampton: CM Publications, 1987. pp. 335-346
summary	This paper describes a knowledge-based graphical interface for the domain of structural engineering. The key aspects of the system include graphics interpretation, feature extraction of graphic objects and the identification of the entity itself. Details of the implementation of a prototype system using Prolog and C are provided. The domain knowledge is represented as frames. Examples are given to illustrate the performance of the system
keywords	structures, user interface, knowledge base, systems, design, engineering, computer graphics, frames
series	CADline
email
last changed	2003/06/02 13:58

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	9583
authors	Brown, Stephen
year	1987
title	Computer-Aided Learning Support for Environmental Design Students Ergonomic Design
source	Proceedings of the Human Factors Society 31st Annual Meeting 1987 pp. 889-893
summary	Intelligent CAD systems could be a useful vehicle for disseminating Human Factors principles among non Human Factors designers. Limitations of current CAD systems are discussed and an experimental system is described. It is suggested that future CAD systems should be less than expert, should be responsive to different learning styles and should employ a variety of electronic media at the user interface.
series	other
last changed	2002/07/07 16:01

_id	0518
authors	Degelman, Larry O. and Miranda, Valerian
year	1987
title	Development of Interfaces for CAD Processing in Architecture
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 95-104
doi	https://doi.org/10.52842/conf.acadia.1987.095
summary	Substantial efforts within Europe and Japan, as well as the U.S., have been placed on automating construction processes within the building industry, while lesser efforts have been focused on computer integration in the design processes. This paper addresses the design end of the design/build spectrum and how this subject is approached in the educational and research programs at Texas A&M University. The problems of fragmentation and incompatibility of existing software data bases for building design are recognized as being the major drawbacks to significant progress in Computer-Aided Design. This is followed by a description of proposed models for future interfaces and communications linkages necessary for successful computer integration in the building design process. Efforts in the area of CAD development are undertaken within the "computers in architecture" emphasis area in the PhD program at this university and are targeted at resolution of the CAD interface problems. This happens in both the teaching and research programs. Initially, the communication problems between the building design team and the building systems software are being approached through a PhD-level course in software development for building design problems. In this context, the non-graphical aspects of CAD are being addressed through the development of user friendly, tutorial- type software. Longer range research objectives are directed at the special three-way interfaces between the (1) Design Team, (2) Graphics Handler, and (3) Analytical Engine, and the linkages of these to the Common Data Base.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	e290
authors	Kalay, Yehuda E.
year	1987
title	Worldview : An Integrated Geometric Modeling/Drafting System
source	IEEE Computer Graphics and Applications. February, 1987. vol. 7: pp. 36-46 : ill. (some col.). includes bibliography
summary	Worldview is a computer-aided architectural and engineering design system that combines the power of geometric modeling utilities with the intuitive design and communication capabilities of drafting utilities. This article describes the basic design concepts and implementation of the system, achieved by representing the designed artifact nonredundantly in a three-dimensional 'world' and manipulating it through multiple two-dimensional 'views.' The world consists of a collection of shapes that store all the formative information pertinent to the designed artifact, while the views consist of images of selected shapes, generated through particular two-way mapping transforms. Several views that depict the same set of shapes through different transforms can be displayed simultaneously, using multiple, dynamic, user- defined windows, thereby enabling addressability of points in the 3D world. Views also include such design and communication aids as dimension lines, construction lines, annotations, and graphic symbols to enhance the visual content of the images without encumbering the representation of the shapes themselves. Modifications applied to the shapes through any view are immediately apparent in all other views in which the shapes are imaged. The shapes are represented by a data structure based on the Hybrid Edge data model, which facilitates the integration of points, lines, surfaces, and volumetric bodies into one formative hierarchy. The integration of drafting and modeling simplifies the use of powerful modeling utilities by designers, facilitates the communication of the designed artifact, and enhances the integrity of the design as a whole
keywords	drafting, systems, geometric modeling, representation, user interface, computer graphics, CAD, architecture, engineering
series	CADline
email
last changed	2003/06/02 10:24

_id	4910
authors	Rasdorf, William J. and Watson, Bruce R.
year	1987
title	A Knowledge-Based Approach to Engineering Information Retrieval and Management
source	London, UK: Chapman and Hall Ltd., 1987. pp. 267-295
summary	Building design, construction, operation, maintenance, and control are all processes that have achieved various levels of computer use. Although the degree of computerization varies significantly, one common aspect of the computing needs of each process is an abundance of data in the form of tables, standards, project definition information, catalogs, etc. In most cases this data is stored in files which are independently used for input to stand-alone single-process application programs, such as a structural analysis application. The utility of these independent files is therefore limited to a single application. As concepts of integration of engineering applications evolved, the use of databases and database management systems (DBMS) increased. A number of issues of significant concern emerged. First, there is a need to retrieve data from many independent, possibly widely distributed databases. Second, there is a need for a uniform means of doing so. Third, such databases routinely undergo dynamic change. Changes in a database schema commonly result from the evolution of a design, from changes in the design process itself, and from changes in other subsequent downstream processes. Such continuing changes must be reflected in the database schemas and they subsequently require that application programs be updated and that online users be educated on a continuing basis. This chapter describes a knowledge-based expert system that provides access to and integration of the many underlying databases needed to support the building design/construction process. The unique aspect of the expert system presented in this chapter is its capture of the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS to retrieve data. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact name by which it is stored in the database. In doing so it formalizes the levels of complexity of that knowledge and points out the multidisciplinary applications of the research results
keywords	civil engineering, knowledge base, database, expert systems
series	CADline
last changed	2003/06/02 10:24

_id	2fac
authors	Schmitt, Gerhard
year	1987
title	ARCHPLAN - An Architectural Planning Front End to Engineering Design Expert Systems
source	ii, 22 p. : ill
summary	Engineering Design Research Center, CMU, 1987. EDRC-48-04-87. ARCHPLAN is a knowledge-based ARCHitectural PLANning front end to a set of vertically integrated engineering expert systems. ARCHPLAN is part of a larger project to explore the principles of parallel operation of expert systems in an Integrated Building Design Environment. It is designed toÔ h)000*°° ÔŒ operate in conjunction with HIRISE, a structural design expert system; with CORE and SPACER, two expert systems for the spatial layout of buildings; and with other knowledge based systems dealing with construction planning, specification, and foundation design. ARCHPLAN operates either in connection with these expert systems or as a stand- alone program. It consists of three major parts: the application, the user interface, and the graphics package
keywords	The application offers a knowledge based approach towards the
series	CADline
last changed	1999/02/12 15:09

_id	a60d
authors	Bairstow, Jeffrey N.
year	1987
title	Personal Workstations Redefine Desktop Computing
source	high Technology. March, 1987. pp. 18-23 : ill. includes bibliography: p. 64
summary	Becoming an essential tool in any creative activity, the personal workstations were successfully adopted by software developers for designing both system and application software, by electronics engineers for computer-aided design, and by a wide range of businesses for technical publishing. The rapid adoption of networking and file standards by the workstation manufacturers will undoubtedly put them in a good position to install large networks of both PCs and workstations linked to existing corporate mainframe computers
keywords	hardware, technology, business
series	CADline
last changed	2003/06/02 13:58

_id	448b
authors	Gerzso, Miguel J.
year	1987
title	On the Reasons for Designing an Object Based Language Called TM
source	1987. 7 p. : ill. includes bibliography
summary	One of the most basic problems in attempting to use computers for architectural applications has been the generation of design alternatives. In order to approach this problem, it is claimed in the paper that in reality it is two basic problems: a methodological problem and a data and procedural representation problem. Diagrammatic Production Rules (DPR's), developed previously by the author, have been proposed for dealing with methodological problem and TM, an object based language, is proposed in the paper for dealing with the data and procedural representation problem. An example of a DPR and a 'program' in TM are included to illustrate the relationship between the two
keywords	languages, representation, OOPS, CAD, applications, programming, architecture, synthesis, design
series	CADline
last changed	2003/06/02 13:58

_id	e60d
authors	Gross, Mark D., Ervin, Stephen M. and Anderson, James (et al)
year	1987
title	Designing with Constraints
source	John Wiley & Sons, 1987. pp. 53-83. includes bibliography
summary	The constraint model of designing provides a means of demonstrating and exploring the computability of design. Designing is understood as a process of incrementally defining an initially ill-defined question, and concurrently proposing and testing possible answers. That is, not finding THE solution to A problem, but finding A solution to THE problem. Articulating (including inventing and modifying) the question, and exploring possible alternative answers (or designs), are two fundamental activities which can be supported by computers and the constraint model. The authors discuss the use of constraints to explicate design questions, circumscribe feasible regions and specify proposed solutions, and examine the processes of search and scrutiny within a region. Naming, solving history-keeping, block-structuring, identifying and resolving conflicts are among tasks identified that can be rendered to a computer. Questions of knowledge representation and inference making with ambiguity and imprecision are discussed. Examples of the application of the constraint model to design problems in architecture and site planning are illustrated by brief scenarios
keywords	constraints, design process, search, knowledge
series	CADline
last changed	2003/06/02 10:24

_id	59de
authors	Lansdown, J.
year	1987
title	The Creative Aspects of CAD: A Possible Approach
source	Design Studies, (8) 2, pp. 76-81
summary	Whilst it is common ground that CAD systems can help designers in many areas, what is not clear is the extent of assistance that can be provided in the creative aspects. A possible approach to creative designing with computers is that of `prototype modification'. It is possible to see all designing in terms of this approach. The distinction between innovative design and design by modification results only from the quality and nature of the prototypes and modifications involved.
series	journal paper
last changed	2003/04/23 15:14

_id	0347
authors	Maver, T.
year	1988
title	Software Tools for the Technical Evaluation of Design Alternatives
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 47-58
summary	Designing buildings which 'work' - economically, socially and technically - remains the central challenge for architects. This paper is concerned with the state of development of software tools for the evaluation of the technical issues which are relevant at the conceptual stages, as opposed to the detailed stages, of design decision-making. The technical efficiency of building is of enormous economic importance. The capital investment in building in Europe represents some 12% of the Gross Domestic Product; this capital investment is exceeded by an order of magnitude, however, by the operating costs of buildings over their life span. In turn, these operating costs are exceeded - again by an order of magnitude - by the costs associated with the (human) operations which go on within the building, and on which the design of the building has some impact.
series	CAAD Futures
email
last changed	2001/06/04 17:16

_id	e524
authors	Miranda, Valerian and Degelman, Larry 0.
year	1987
title	An Experimental Computer-Aided Design Studio
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 19-28
doi	https://doi.org/10.52842/conf.acadia.1987.019
summary	A pilot experiment was conducted in the use of microcomputers and Computer Aided Design (CAD) software for architectural design education. The CAD workstations were incorporated into two consecutive semesters of the third year design studio and consisted of TANDY 3000 HD (tm) microcomputers with 20 megabyte hard disks, digitizer tablets, digitizer mice, enhanced graphics capabilities, dot-matrix printers and multi-pen plotters. Software packages included the Personal Architect (tm), VersaCAD (tm), DataCAD (tm), word processing software etc. Student to machine ratio of 4 to 1 was maintained and the use of the equipment was made available to students for approximately 20 hours per day. Design assignments neither emphasized nor required the use of CAD techniques, as the experiment was designed to measure the students' acceptance of and adaptation to the use of CAD tools. The objective was to "teach" design in the traditional sense of a design studio, while making the computer an integral part of the setting in which the student learned designing and problem solving. Measurements were made of (1) time for the "fundamentals" learning curve, (2) time for a "basic competence" learning curve, (3) hours utilized by categories of type of use, (4) hours utilized by equipment and software type, and (5) progress in design ability as evaluated by the traditional jury review methods.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	27e8
authors	Rasdorf, William J. and High, Stacey L.
year	1987
title	Simplified Steel Compression Member Design
source	Dynamics of Structures ASCE Structures Congress Proceedings. 1987. American Society of Civil Engineers, vol. D: pp. 352-367. CADLINE has abstract only
summary	The American Institute of Steel Construction 'Specification for the Design, Fabrication, and Erection of Structural Steel Buildings' has made manual steel column design exceedingly time consuming and difficult. The objective of this paper is to present a simplified method of designing steel columns subjected to axial loads and moments for use in situations where automated design methods are inappropriate. Steel column design is based on the interaction equations of the AISC Specification. These equations are presented in terms of actual and allowable stresses and much time is required by a designer to manually determine the stresses and solve the equations. To simplify their solution, the interaction equations were reformulated and a set of parameters (multipliers) was introduced into them. The parameters were investigated to determine their validity, limits, and ranges of significant influence. They were then tabulated to provide quick and easy access for use. The modified interaction equations and the tabulated parameters constitute the results of this study. They are the physical tools that enable a designer to rapidly select initial steel column sections to satisfy design requirements and specification constraints. The analysis confirms that these tools can realistically and accurately be determined. The equations were algebraically derived and the tables were generated as a function of the properties of the sections. Thus, a new design method, combining the use of tabulated parameters with algebraically modified interaction equations, has been developed. This method greatly simplifies and speeds up the column section selection process
keywords	civil engineering, structures, synthesis, design, methods
series	CADline
last changed	2003/06/02 13:58

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	a936
authors	Boesjes, E.
year	1988
title	The Structure of the Automation Process; Implications for CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 59-69
summary	In this paper we describe the dynamic process of change of computer components, computer products and user-techniques. We will refer to this process as the process of automation. In the first part we describe the structure of the process of automation. This structure consists of components and relations between these components. Some of the relations can be characterised as regularities. In the second part we briefly describe the State of the Art in CAAD. From the State of the Art and the process of automation we can extrapolate the State of the Future in CAAD. This extrapolation doesn't bring us to the future we want. The structure of the process of automation will have to change if we want future CAAD to develop towards an ideal.
series	CAAD Futures
last changed	2003/11/21 15:16

For more results click below: