Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 153

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_239
id	acadia12_239
authors	Jackson, Jesse ; Stern, Luke
year	2012
title	Fabricating Sustainable Concrete Elements: A Physical Instantiation of the Marching Cubes Algorithm
doi	https://doi.org/10.52842/conf.acadia.2012.239
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 239-247
summary	This paper explores how an algorithm designed to represent form can be made physical, and how this physical instantiation can be made to respond to a set of design imperatives. Specifically, the paper demonstrates how Marching Cubes (Lorensen and Cline 1987), an algorithm that extracts a polygonal mesh from a scalar field, can be used to initiate the design for a system of modular concrete armature elements that permit a large degree of variability using a small number of discrete parts. The design of these elements was developed in response to a close examination of Frank Lloyd Wright's Usonian Automatic system, an architecturally pertinent historical precedent. The fabricated results positively satisfy contemporary design criteria, including maximal formal freedom, optimal environmental performance, and minimal life-cycle costs.
keywords	Form-finding Algorithms , Digital Fabrication , Sustainability , Frank Lloyd Wright , Concrete , Tectonic Elements
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

_id	e9ef
authors	Casale, Malcolm S.
year	1987
title	Free-Form Solid Modeling with Trimmed Surface Patches
source	IEEE Computer Graphics and Applications January, 1987. vol. 7: pp. 33-43 : col. ill. includes bibliography.
summary	Solid modelers store a more complete representation than wireframe or surface modelers. This completeness permits the automation of such tasks as interference analysis, mass property calculation, and finite element mesh generation. But the denser information content and complex algorithms needed to perform these tasks complicate the support of free-form geometry, especially Boolean operations. Consequently, the high degree of geometric coverage traditionally found in surface modeling systems has not, for the most part, been equaled in modern solid modelers. This article explores some of the difficulties encountered in Boolean combinations of free-form solids and presents a geometric representation designed to circumvent them
keywords	solid modeling, curved surfaces, representation, geometric modeling, curves, boolean operations
series	CADline
last changed	2003/06/02 13:58

_id	0518
authors	Degelman, Larry O. and Miranda, Valerian
year	1987
title	Development of Interfaces for CAD Processing in Architecture
doi	https://doi.org/10.52842/conf.acadia.1987.095
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 95-104
summary	Substantial efforts within Europe and Japan, as well as the U.S., have been placed on automating construction processes within the building industry, while lesser efforts have been focused on computer integration in the design processes. This paper addresses the design end of the design/build spectrum and how this subject is approached in the educational and research programs at Texas A&M University. The problems of fragmentation and incompatibility of existing software data bases for building design are recognized as being the major drawbacks to significant progress in Computer-Aided Design. This is followed by a description of proposed models for future interfaces and communications linkages necessary for successful computer integration in the building design process. Efforts in the area of CAD development are undertaken within the "computers in architecture" emphasis area in the PhD program at this university and are targeted at resolution of the CAD interface problems. This happens in both the teaching and research programs. Initially, the communication problems between the building design team and the building systems software are being approached through a PhD-level course in software development for building design problems. In this context, the non-graphical aspects of CAD are being addressed through the development of user friendly, tutorial- type software. Longer range research objectives are directed at the special three-way interfaces between the (1) Design Team, (2) Graphics Handler, and (3) Analytical Engine, and the linkages of these to the Common Data Base.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	e290
authors	Kalay, Yehuda E.
year	1987
title	Worldview : An Integrated Geometric Modeling/Drafting System
source	IEEE Computer Graphics and Applications. February, 1987. vol. 7: pp. 36-46 : ill. (some col.). includes bibliography
summary	Worldview is a computer-aided architectural and engineering design system that combines the power of geometric modeling utilities with the intuitive design and communication capabilities of drafting utilities. This article describes the basic design concepts and implementation of the system, achieved by representing the designed artifact nonredundantly in a three-dimensional 'world' and manipulating it through multiple two-dimensional 'views.' The world consists of a collection of shapes that store all the formative information pertinent to the designed artifact, while the views consist of images of selected shapes, generated through particular two-way mapping transforms. Several views that depict the same set of shapes through different transforms can be displayed simultaneously, using multiple, dynamic, user- defined windows, thereby enabling addressability of points in the 3D world. Views also include such design and communication aids as dimension lines, construction lines, annotations, and graphic symbols to enhance the visual content of the images without encumbering the representation of the shapes themselves. Modifications applied to the shapes through any view are immediately apparent in all other views in which the shapes are imaged. The shapes are represented by a data structure based on the Hybrid Edge data model, which facilitates the integration of points, lines, surfaces, and volumetric bodies into one formative hierarchy. The integration of drafting and modeling simplifies the use of powerful modeling utilities by designers, facilitates the communication of the designed artifact, and enhances the integrity of the design as a whole
keywords	drafting, systems, geometric modeling, representation, user interface, computer graphics, CAD, architecture, engineering
series	CADline
email
last changed	2003/06/02 10:24

_id	27e8
authors	Rasdorf, William J. and High, Stacey L.
year	1987
title	Simplified Steel Compression Member Design
source	Dynamics of Structures ASCE Structures Congress Proceedings. 1987. American Society of Civil Engineers, vol. D: pp. 352-367. CADLINE has abstract only
summary	The American Institute of Steel Construction 'Specification for the Design, Fabrication, and Erection of Structural Steel Buildings' has made manual steel column design exceedingly time consuming and difficult. The objective of this paper is to present a simplified method of designing steel columns subjected to axial loads and moments for use in situations where automated design methods are inappropriate. Steel column design is based on the interaction equations of the AISC Specification. These equations are presented in terms of actual and allowable stresses and much time is required by a designer to manually determine the stresses and solve the equations. To simplify their solution, the interaction equations were reformulated and a set of parameters (multipliers) was introduced into them. The parameters were investigated to determine their validity, limits, and ranges of significant influence. They were then tabulated to provide quick and easy access for use. The modified interaction equations and the tabulated parameters constitute the results of this study. They are the physical tools that enable a designer to rapidly select initial steel column sections to satisfy design requirements and specification constraints. The analysis confirms that these tools can realistically and accurately be determined. The equations were algebraically derived and the tables were generated as a function of the properties of the sections. Thus, a new design method, combining the use of tabulated parameters with algebraically modified interaction equations, has been developed. This method greatly simplifies and speeds up the column section selection process
keywords	civil engineering, structures, synthesis, design, methods
series	CADline
last changed	2003/06/02 13:58

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	8eb4
authors	Athithan, G. and Patnaik, L.M.
year	1987
title	Geometric Searching In Extended CSG Models : Application to Solid Modeling and Viewing
source	February, 1987. 30 p. : ill
summary	In this paper, the CSG representation scheme is augmented with the 'cartesian product.' The sweep method of generating solids is encompassed by this 'Extended CSG' formalism. The point inclusion problem encountered in the area of geometric searching in computational geometry is discussed in the context to solid models represented by 'extended CSG.' A simple algorithm to solve it that has a time complexity O(n), where n is the number of primitives, is presented. Allowing for preprocessing and extra storage, a second efficient algorithm, having a time complexity O(log n), is developed. The relevance of point inclusion problem in solid modelling techniques is indicated. An extended CSG based solid modeling method is proposed. A solution to the problem of hidden line removal, that uses the faster algorithm for the point inclusion problem, is also presented in the paper
keywords	point inclusion, computational geometry, data structures, solid modeling, CSG, computer graphics, hidden lines
series	CADline
last changed	2003/06/02 14:41

_id	266d
authors	Badler, Norman I., Manoochehri, Kamran H. and Walters, Graham
year	1987
title	Articulated Figure Positioning by Multiple Constraints
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 28-38 : ill. Includes bibliography
summary	A problem that arises in positioning an articulated figures is the solution of 3D joint positions (kinematics), when joint angles are given. If more than one such goal is to be achieved, the problem is often solved interactively by positioning or solving one component of the linkage, then adjusting another, then redoing the first, and so on. This iterative process is slow and tedious. The authors present a method that automatically solves multiple simultaneous joint position goals. The user interface offers a six-degree-of freedom input device to specify joint angles and goal positions interactively. Examples are used to demonstrate the power and efficiency of this method for key-position animation
keywords	animation, constraints, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	a60d
authors	Bairstow, Jeffrey N.
year	1987
title	Personal Workstations Redefine Desktop Computing
source	high Technology. March, 1987. pp. 18-23 : ill. includes bibliography: p. 64
summary	Becoming an essential tool in any creative activity, the personal workstations were successfully adopted by software developers for designing both system and application software, by electronics engineers for computer-aided design, and by a wide range of businesses for technical publishing. The rapid adoption of networking and file standards by the workstation manufacturers will undoubtedly put them in a good position to install large networks of both PCs and workstations linked to existing corporate mainframe computers
keywords	hardware, technology, business
series	CADline
last changed	2003/06/02 13:58

_id	016a
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	A Knowledge-based Approach to Mathematical Design Modeling and Optimization
source	engineering Optimization. 1987. vol. 12: pp. 91-115
summary	Optimization is a well understood process in design domains. Designers formulate their design problems as single criterion or multicriteria optimization problems and then select an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for its solution. Finally, it runs the selected algorithm(s) and sends the results back to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the system. The basic philosophy and key features of the system are described and are illustrated with examples
keywords	structures, algorithms, knowledge base, systems, optimization, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	b9d1
authors	Barlas, Adnan
year	1987
title	STAGED BUILDING IN HIGH RISE HOUSING
source	Proceedings of the 1st European Full-Scale Workshop Conference / ISBN 87-88373-20-7 / Copenhagen (Denmark) 15-16 January 1987, pp. 53-56
summary	Since 1950s Turkey is experiencing a high rate of urbanization as a result of the inflow of Iarge number of rural immigrants to the urban areas, in addition to the natural urban population growth. This high level of urbanization gave rise to various burdens and problems within the urban areas. One of these problems.and the most important,is seen in the housing sector. The increasing level of housing need of the urban society could not be met by, the available urban housing a stock. Thus, there emerged a different type of production at the fringes of the urban areas, which is called as "squatter"; being completely unauthorized. In addition to the rapid urbanization -he general deficiencies in the Turkish economy have also effected the urban case. The rents and the prices of the dwelling units in the authorized stock increased to such level that, a great portion of the urban households with low and lower middle incomes could not afford to buy or rent a dwelling unit from the authorized stock. The situation is still the same now.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:07

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	963b
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1987
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	Morgan Kaufmann Publishers, Los Altos, CA
summary	The most basic output primitives in every computer graphics library are "lineSegment()" and "Polygon()", ortheir equivalents. These are, of course, sufficent in the sense that any curved line or surface can be arbitrarrily well approximated by straight line segments or planar polygons, but in many contexts that is not enough. Such approximations often require large amounts of data to obtain satifactory smoothness, and they are awkward to manipulate. Then too, even with the the most sophisticated continous shading models, polygonaltechniques can resultin visually ojectionable images. Mach bands may be apparent at the borders between adjacent polygons, and there is always a telltale angularity to polygonal silhouettes. Hence many modeling systems are augmented by circles, spheres, cylinders, etc. and allow such simple primitives to be combined to form quite complex objects.
series	other
last changed	2003/04/23 15:14

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	7767
authors	Danahy, John W.
year	1987
title	Sophisticated Image Rendering in Environmental Design Review Graphics Systems
source	Proceedings of ACM CHI+GI'87 Conference on Human Factors in Computing Systems and Graphics Interface 1987 p.211-217
summary	The Landscape Architecture Programme and the Computer Systems Research Institute at the University of Toronto undertook two studies using advanced rendering tools pioneered in the areas of computer animation and graphic art. Through two professional landscape architectural design studies we explored the potential role and impact of computer simulation in the initial, more creative phases of the design work. Advanced image rendering hardware and software were used to produce high quality computer drawings of design concepts. The techniques employed in this study are unique in their application to environmental design where they dramatically improve the designer's opportunities to simulate realistic images of proposed design alternatives and to consider the visual and spatial implications of such alternatives. The case studies represented in the paper were undertaken for the National Capital Commission in Ottawa, Canada. The first project is an urban design massing study called the "Parliamentary Precinct Study" and the second project is a detailed design of the "Ceremonial Routes" in Ottawa.
keywords	Image Rendering; Design Review; System Specification
series	other
last changed	2002/07/07 16:01

_id	e7a8
authors	Emde, H.
year	1988
title	Geometrical Fundamentals for Design and Visualization of Spatial Objects
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 171-178
summary	Every architectural object is a 3-dimensional entity of the human environment, haptically tangible and optically visible. During the architectural process of planning every object should be designed as a body and should be visualized in pictures. Thus the parts of construction get an order in space and the steps of construction get an order in time. The ideal planning object is a simulated anticipation of the real building object, which is to be performed later on. The possibility to relate the planning object immediately to the building object relies on the fact that they both have the same "geometry" This means: both can be described in the same geometric manner. Creating and visualizing spatial objects is based on geometrical fundamentals. Theoretical knowledge and practical control of these fundamentals is essential for the faultless construction and the realistic presentation of architectural objects. Therefore they have to be taught and learned thoroughly in the course of an architectural education. Geometrical design includes the forming of object- models (geometry of body boundaries), the structuring of object-hierarchies (geometry of body combinations) and the colouring of objects. Geometrical visualization includes controlling the processes of motion, of the bodies (when moving objects) and of the center of observation (when moving subjects) as well as the representation of 3-dimensional objects in 2- dimensional pictures and sequences of pictures. All these activities of architects are instances of geometrical information processing. They can be performed with the aid of computers. As for the computer this requires suitable hardware and software, as for the architect it requires suitable knowledge and capabilities to be able to talk about and to recall the perceivable objects and processes of the design with logic abstracts (language of geometry). In contrast to logical, numerical and textual informations the geometric informations concerning spatial objects are of much higher complexity. Usually these complexes of information are absorbed, processed and transmitted by the architect in a perceptive manner. The computer support in the field of geometry assumes that the processing of perceptions of the human consciousness can be converted by the computer as a framework of logical relations. Computer aided construction and representation require both suited devices for haptical and optical communication and suitable programs in particular.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	a7c1
authors	Galle, Per
year	1987
title	A Basic Problem Definition Language for Automated Floor Plan Design
source	113 p. 1987. DIKU Research Report No. 87/4
summary	CADLINE has abstract only. Algorithms for automated floor plan design need a machine- readable description of properties of the desired floor plans. In this report BPDL ('Basic Problem Definition Language'), a rudimentary language for stating such descriptions, is developed. The development is based on a discussion of pragmatic aspects of possible features of the language. The resulting language is described by formal definitions of syntax and semantics, accompanied by informal explanations. Finally, experiments with a floor plan design algorithm that supports BPDL are reported and it is concluded that even a rudimentary language like BPDL can describe relatively non- trivial floor plan layouts, provided a set of geometrical primitives, attributes and relations that make up the language are carefully chosen. Further research along the lines of BPDL is suggested, and the importance of a systematic approach to development of future specification languages for architectural design is stressed
keywords	architecture, floor plans, design, attributes, relations, semantics, algorithms, synthesis, planning, languages
series	CADline
last changed	1999/02/12 15:08

For more results click below: