Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 167

Reformat results as: short short into frame detailed detailed into frame

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	8cff
authors	Fridqvist, Sverker
year	1989
title	Computers as a Creative Tool in Architecture
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.6.1-9.6.4
doi	https://doi.org/10.52842/conf.ecaade.1989.x.k1l
summary	The School of Architecture at Lund Institute of Technology was augmented by the establishment of the Computer Studio in 1987. As a result the school now has a device for teaching and research in the architects' use of computers. We are now conducting several research projects as well as courses and an education project. The third and fourth years of the education at the school of architecture are arranged as education projects instead of traditional lecturing. The students choose from projects that are organised by different departments at the School of Architecture. The issue is that the students will ask for instruction when felt needed, and that learning will therefore be more efficient. The Computer Studio has conducted such a project during the first half of 1989. We have tried to encourage the students to use our different computers and programs in new and creative ways. One of the issues of the computer project is to teach the students how computers are used at the architects offices today as well as expected future developments. The students shall be acquainted well enough with present and future possibilities to make good choices when deciding upon buying computers for architectural use. Another issue is to develop new ways of making and presenting architecture by using computers. As a group the teachers at the school of architecture have a very restrictive attitude towards the use of computers. We hope that our project will open their minds for the possibilities of computers, and to engage them in the development of new ways to use computers creatively in architecture. An interesting question is if the use of computers will yield different outcomes of he students' work than traditional methods. An object for research is whether the added possibilities of considering different aspects of he design by using a computer will make for higher quality of the results.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	ae4f
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Majkowski, Bruce R.
year	1987
title	Computer-Aided Architectural Design Research : Summary of Proposed Research Plan
source	March, 1987. [8] p. includes bibliography
summary	The potentials of recent advancements in computer-driven, information-rich technologies have begun to effect the disciplines of architecture, planning, and design. The roles of computer-aided design tools are, however, still not completely specified, and it is the responsibility of research institutes, and in particular schools of architecture and design, to explore, define, and develop the uses of computers in architecture, planning, and design. The CAD program at the School of Architecture and Planning is based on the premise that research and education are both essential and interdependent components which provide students with necessary technical skills, improve methods of teaching fundamental design knowledge, and foster the exploration and development of new technologies and methodologies for computers in design. The program has been implemented in what the authors have termed the 'Triad Methodology' of computer-aided architectural design: the teaching of CAD principles to students, the development of a strong research program, and the use of computer tools to enhance the school's general curriculum. The CAD Lab functions as a conduit for basic and advanced research intended to enhance architecture and planning through the use of computers. The faculty and graduate students have already demonstrated their interest and ability to undertake state of the art research in CAD. It is expected that these interests will continue and proliferate in the future. This paper briefly outlines the direction, scope, and required resources for computer related research at the School of Architecture and Planning in Buffalo
keywords	CAD, education, architecture, research
series	CADline
email
last changed	2003/06/02 10:24

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	43a9
authors	Goldman, Glenn and Zdepski, Stephen
year	1987
title	Form, Color & Movement
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 39-50
doi	https://doi.org/10.52842/conf.acadia.1987.039
summary	Computer generated three dimensional architectural modeling is a fundamental transformation of the traditional architectural design process. Viewing a three dimensional computer model from many vantage points and through animation sequences, presents buildings and their surrounding environments as a sequence of spaces and events, rather than as static objects or graphic abstractions. Three dimensional modeling at the earliest stages of design tends to increase the spatial and formal properties of early building design studies, and diminishes the dominance of plan as the form giver. The following paper is based upon the work of second, third and fifth year architectural students who have engaged in architectural design through the use of microcomputer graphics. In each case they entered the architectural studio with virtually no computer experience. Although the assigned architectural projects were identical to those of other "conventional" architectural studios, their design work was accomplished, almost solely, using four different types of graphic software: Computer-Aided Drafting, 3-Dimensional Modeling, Painting and Animation programs. Information presented is based upon student surveys, semester logs, interviews, impressions of external design critics, and the comparison of computer based and conventional studio final presentations.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	2622
authors	Schmitt, G.
year	1988
title	Expert Systems and Interactive Fractal Generators in Design and Evaluation
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 91-106
summary	Microcomputer based interactive programmable drafting programs and analysis packages are setting new standards for design support, systems in architectural offices. These programs allow the representation and performance simulation of design proposals with one tool, but they lack the ability to represent knowledge concerning relations between design and artifact. While they can expediate the traditional design and analysis process, they do not fundamentally improve it. We shall describe three computationally related approaches which could be a step towards a necessary paradigm change in developing design software. These approaches deal with expert design generators and evaluators, function oriented programming, and fractal design machines.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	8eb5
authors	Gero, John S. (Conference Chairman and Editor)
year	1987
title	Expert Systems in Computer-Aided Design
source	IFIP WG 5.2 Working Conference on Expert Systems in Computer-Aided Design. proceedings. 1987. 533 p. : ill. Amsterdam: North-Holland, 1987. Also published as a book by North Holland (Amsterdam, 1987)
summary	The aim of the Expert Systems in Computer-Aided Design conference was to provide a forum for the exchange of ideas and experiences related to expert systems in computer-aided design, to present and explore the state-of-the-art of expert systems in computer-aided design, to delineate future directions in both research and practice and to promote further development. Seventeen of the nineteen papers accepted were presented with each presentation followed by a round table discussion. The discussion was taped, transcribed and edited and forms part of this volume. The authors came from seven countries, whilst the attendees represented some thirteen nationalities. There is an implicit structure in the ordering of the papers, commencing with system architectures, representation tools through applications to specific design concerns. These papers demonstrate the wide variety of knowledge engineering tools needed in computer-aided design. It is interesting to observe the progression over these three conferences in the ratio of computer scientists to design researchers amongst the authors. The balance over the period has swung from a predominance of computer scientists to a predominance of design researchers. We are beginning to see knowledge engineering development driven by designers' needs
keywords	CAD, expert systems, AI, design
series	CADline
email
last changed	2003/06/02 13:58

_id	448b
authors	Gerzso, Miguel J.
year	1987
title	On the Reasons for Designing an Object Based Language Called TM
source	1987. 7 p. : ill. includes bibliography
summary	One of the most basic problems in attempting to use computers for architectural applications has been the generation of design alternatives. In order to approach this problem, it is claimed in the paper that in reality it is two basic problems: a methodological problem and a data and procedural representation problem. Diagrammatic Production Rules (DPR's), developed previously by the author, have been proposed for dealing with methodological problem and TM, an object based language, is proposed in the paper for dealing with the data and procedural representation problem. An example of a DPR and a 'program' in TM are included to illustrate the relationship between the two
keywords	languages, representation, OOPS, CAD, applications, programming, architecture, synthesis, design
series	CADline
last changed	2003/06/02 13:58

_id	e3a4
authors	Girard, Michael
year	1987
title	Interactive Design of 3D Computer-Animated Legged Animal Motion
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 39-51 : ill. includes bibliography
summary	A visually interactive approach to the design of 3D computer- animated legged animal motion in the context of the PODA computer animation system is presented. The design process entails the interactive specification of parameters that drive a computational model for animal movement. The animator incrementally modifies a framework for establishing desired limb and body motion as well as the constraints imposed by physical dynamics (Newtonian mechanical properties) and temporal restrictions. PODA uses the desired motion and constraints specified by the animator to produce motion through an idealized model of the animal's adaptive dynamic control strategies
keywords	computer graphics, animation
series	CADline
last changed	1999/02/12 15:08

_id	c7ac
authors	Hardwick, Martin and Spooner, David L.
year	1987
title	Comparison of Some Data Models for Engineering Objects
source	IEEE Computer Graphics and Applications. March, 1987. vol. 7: pp. 56-66 : ill. includes bibliography
summary	Many proposals using object-oriented data models for engineering objects have appeared in the literature. These data models try to represent the data in engineering systems more naturally by organizing it logically and/or physically into objects relevant to the engineering applications using the database. The article reviews and examines several of these proposed data models to identify important properties of the models. It shows that none of the data models excels in all areas, but each has desirable properties
keywords	objects, CAD, design, database, representation, modeling
series	CADline
last changed	2003/06/02 13:58

_id	cd8d
authors	Herbert, Daniel M.
year	1987
title	Study Drawings in Architectural Design: Applications for CAD Systems
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 157-168
doi	https://doi.org/10.52842/conf.acadia.1987.157
summary	To guide their future development, research and teaching in computer-aided design must look beyond the technical capabilities of computer systems to establish a theoretical foundation based on known processes in design. This paper suggests that such a theoretical foundation can be derived by analyzing architectural study drawings -- defined as the rough drawings that architects make in the exploratory stages of design -- to determine their epistemelogical properties. The analysis brings forward concepts from a number of disciplines related to the structure of human knowledge to identify five properties of study drawings. Based on these properties, the paper proposes strategies for application to the next generation of research and teaching in CAD systems.
series	ACADIA
last changed	2022/06/07 07:49

_id	0740
authors	Herman, M. Jackson, N. and Pomerenke, S.
year	1987
title	Four-D Architectural Exploration Through CAD: Applications of the Computer to Architectural History
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 55-64
doi	https://doi.org/10.52842/conf.acadia.1987.055
summary	This paper, which is based on ongoing research, demonstrates methods of utilizing Computer-Aided Design (CAD) to explore objects of architectural significance in relation to time and space. The paper shows how the use of animated walk-through allows these objects to be experienced with the realism of built form which no other means of recording can achieve. The paper argues that, through the use of the computer, the whole nature of Architectural History, as it is currently taught in schools of architecture, will need to be changed and that a more pragmatic, hands- on approach to the subject will have to be adopted. Thus we advocate that the computer, the tool of today and the future, will allow students to experience architecture in the way they did in the past, from the Grand Tour to the architectural apprenticeship, aU before the introduction of architectural academies.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:51

_id	8385
authors	Holtz, Neal M. and Rasdorf, William J.
year	1988
title	An Evaluation of Programming Languages and Language Features for Engineering Software Development
source	International Journal of Engineering with Computers. Springer-Verlag, 1988. vol. 3: pp. 183-199
summary	Also published as 'Procedural Programming Languages for the Development of CAD and CAE Systems Software,' in the proceedings of ASME International Conference on Computers in Engineering (1987 : New York, NY). The scope of engineering software has increased dramatically in the past decade. In its early years, most engineering applications were concerned solely with solving difficult numerical problems, and little attention was paid to man- machine interaction, to data management, or to integrated software systems. Now computers solve a much wider variety of problems, including those in which numerical computations are less predominant. In addition, completely new areas of engineering applications such as artificial intelligence have recently emerged. It is well recognized that the particular programming language used to develop an engineering application can dramatically affect the development cost, operating cost. reliability, and usability of the resulting software. With the increase in the variety, functionality, and complexity of engineering software, with its more widespread use, and with its increasing importance, more attention must be paid to programming language suitability so that rational decisions regarding language selection may be made. It is important that professional engineers be aware of the issues addressed in this paper, for it is they who must design, acquire, and use applications software, as well as occasionally develop or manage its development. This paper addresses the need for engineers to possess a working knowledge of the fundamentals of computer programming languages. In pursuit of this, the paper briefly reviews the history of four well known programming languages. It then attempts to identify and to look critically at the attributes of programming languages that significantly affect the production of engineering software. The four procedural programming languages chosen for review are those intended for scientific and general purpose programming, FORTRAN 77, C, Pascal, and Modula-2. These languages are compared and some general observations are made. As it is felt important that professional engineers should be able to make informed decisions about programming language selection, the emphasis throughout this paper is on a methodology of evaluation of programming languages. Choosing an appropriate language can be a complex task and many factors must be considered. Consequently, fundamentals are stressed
keywords	programming, engineering, languages, software, management, evaluation, FORTRAN, C, PASCAL, MODULA-2, CAD, CAE
series	CADline
last changed	2003/06/02 13:58

_id	671c
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Harfmann, Anton C.
year	1987
title	A Knowledge-Based Approach to Dynamic Computer-Aided Design Task Allocation
source	Expert Systems in Computer-Aided Design: Proceeding of the IFIP WG 5.2 Working Conference on Expert system in Computer-Aided Design --- edited by Gero, John S Sydney: North-Holland, 1987. pp. 203-224 : ill. includes bibliography.
summary	A model of the design process control that supports dynamic allocation of tasks between a designer and a computer is presented. The model is discussed theoretically, and is demonstrated through a Prolog implementation for the participatory design of single family houses. Its utility and universal applicability are established, as well as its relationship to other computational approaches to design automation
keywords	expert systems, design process, knowledge base, architecture, control, housing, applications
series	CADline
email
last changed	2003/06/02 13:58

_id	e290
authors	Kalay, Yehuda E.
year	1987
title	Worldview : An Integrated Geometric Modeling/Drafting System
source	IEEE Computer Graphics and Applications. February, 1987. vol. 7: pp. 36-46 : ill. (some col.). includes bibliography
summary	Worldview is a computer-aided architectural and engineering design system that combines the power of geometric modeling utilities with the intuitive design and communication capabilities of drafting utilities. This article describes the basic design concepts and implementation of the system, achieved by representing the designed artifact nonredundantly in a three-dimensional 'world' and manipulating it through multiple two-dimensional 'views.' The world consists of a collection of shapes that store all the formative information pertinent to the designed artifact, while the views consist of images of selected shapes, generated through particular two-way mapping transforms. Several views that depict the same set of shapes through different transforms can be displayed simultaneously, using multiple, dynamic, user- defined windows, thereby enabling addressability of points in the 3D world. Views also include such design and communication aids as dimension lines, construction lines, annotations, and graphic symbols to enhance the visual content of the images without encumbering the representation of the shapes themselves. Modifications applied to the shapes through any view are immediately apparent in all other views in which the shapes are imaged. The shapes are represented by a data structure based on the Hybrid Edge data model, which facilitates the integration of points, lines, surfaces, and volumetric bodies into one formative hierarchy. The integration of drafting and modeling simplifies the use of powerful modeling utilities by designers, facilitates the communication of the designed artifact, and enhances the integrity of the design as a whole
keywords	drafting, systems, geometric modeling, representation, user interface, computer graphics, CAD, architecture, engineering
series	CADline
email
last changed	2003/06/02 10:24

_id	eeda
authors	Kalay, Yehuda E.
year	1987
title	Graphic Introduction to Programming
source	xvii, 231 p. : ill. New York: Wiley-Interscience, 1987. includes bibliography p.: 215-216 and Index -- (Principles of Computer- Aided Design)
summary	Teaching PASCAL programming for graphic applications by using graphics from the very beginning. The book is an introduction to computer-aided design and require no prior computer experience
keywords	computer graphics, programming, PASCAL, education
series	CADline
email
last changed	2003/06/02 13:58

_id	cee5
authors	Mackenzie, C.A. and Gero, John S.
year	1987
title	Learning Design Rules from Decisions and Performances
source	Artificial Intelligence in Engineering. 1987. vol. 2: pp. 2-10
summary	This paper examines an approach to the extraction of implicit knowledge in rule form about the relationships between design decisions and their performance consequences. The effects of an imposed structure on a performance space are observed in relation to matching points in a decision space. A mapping between the two spaces embodies the knowledge that is discovered. The performance space is structured by Pareto optimization and the knowledge extraction process is illustrated by two examples from building design. The use of the methodology for learning about decision/performance relationships in extant designs is proposed
keywords	inference, expert systems, design process, evaluation, learning, theory, applications, systems
series	CADline
email
last changed	2003/06/02 14:41

_id	8a1b
authors	Mackenzie, C.A.
year	1987
title	Inducing Relational Grammars From Design Interpretations
source	AI'87 : Proceeding of the Australian Joint Artificial Intelligence Conference. 1987. pp. 207-220 CADLINE has abstract only.
summary	--- Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R. Stanton, North-Holland Pub. 1988. The combination of a heuristic driven search and a tree systems inference technique to induce context-free design grammars is presented. This is achieved by searching for the most useful interpretations of each design in a sample set and discovering regularities in their tree systems representation. The knowledge induced is represented as an accepting tree systems automation and generative grammar. Examples from the domain of architectural design are given
keywords	heuristics, inference, search, shape grammars, knowledge, representation, architecture
series	CADline
last changed	2003/06/02 13:58

For more results click below: