Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 169

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_149
id	ecaade2011_149
authors	Popov, Nikolay
year	2011
title	Generative sub-division morphogenesis with Cellular Automata and Agent-Based Modelling
doi	https://doi.org/10.52842/conf.ecaade.2011.166
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.166-174
summary	This paper reports on some recent research carried out to develop computational generative urban design system that can be used as an alternative approach to master planning. The focus of the investigation is an 11 ha site located in the South-East edge of Auckland, New Zealand. The urban (or sub-urban) morphology is modelled as cellular automaton based on Hillier’s (1984) x-y syntax in order to resemble the morphology of the existing village. An agent based system based on Reynolds’ (1987) flocking algorithm evolves synchronously with the automaton and tests its ecological fitness. The emergent pattern of development therefore results from the mutual co-adaption of the cellular automaton and the agent based model. The outcomes are variety of spatial morphologies that connects well with adjacent existing village and at the same time take into account landscape and ecological peculiarities of the site.
wos	WOS:000335665500019
keywords	Generative urban design; structural coupling; cellular automata; agent based modelling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	a60d
authors	Bairstow, Jeffrey N.
year	1987
title	Personal Workstations Redefine Desktop Computing
source	high Technology. March, 1987. pp. 18-23 : ill. includes bibliography: p. 64
summary	Becoming an essential tool in any creative activity, the personal workstations were successfully adopted by software developers for designing both system and application software, by electronics engineers for computer-aided design, and by a wide range of businesses for technical publishing. The rapid adoption of networking and file standards by the workstation manufacturers will undoubtedly put them in a good position to install large networks of both PCs and workstations linked to existing corporate mainframe computers
keywords	hardware, technology, business
series	CADline
last changed	2003/06/02 13:58

_id	016a
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	A Knowledge-based Approach to Mathematical Design Modeling and Optimization
source	engineering Optimization. 1987. vol. 12: pp. 91-115
summary	Optimization is a well understood process in design domains. Designers formulate their design problems as single criterion or multicriteria optimization problems and then select an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for its solution. Finally, it runs the selected algorithm(s) and sends the results back to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the system. The basic philosophy and key features of the system are described and are illustrated with examples
keywords	structures, algorithms, knowledge base, systems, optimization, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	05c2
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	Use of Knowledge in Selection and Control of Optimization Algorithms
source	engineering Optimization. 1987. vol. 12: pp. 163-173
summary	Computers have been widely used in optimization based problem solving processes to assist with the numerical computations. The widespread availability of symbolic computational tools and recent developments in artificial intelligence now make it feasible to expand the role of computers in this area. Various classes of knowledge used to improve the efficiency of the optimization processes are presented in this paper. A prototype system developed in the domain of multicriteria decision making is demonstrated. The system contains knowledge needed to select appropriate optimization algorithms, to control the solution process, and to select alternate algorithms if needed
keywords	multicriteria, algorithms, knowledge base, systems, problem solving, optimization
series	CADline
email
last changed	2003/06/02 13:58

_id	08a1
authors	Balachandran, M.B. and Gero, John S.
year	1987
title	A Knowledge-based Graphical Interface for Structural Design
source	Southampton: CM Publications, 1987. pp. 335-346
summary	This paper describes a knowledge-based graphical interface for the domain of structural engineering. The key aspects of the system include graphics interpretation, feature extraction of graphic objects and the identification of the entity itself. Details of the implementation of a prototype system using Prolog and C are provided. The domain knowledge is represented as frames. Examples are given to illustrate the performance of the system
keywords	structures, user interface, knowledge base, systems, design, engineering, computer graphics, frames
series	CADline
email
last changed	2003/06/02 13:58

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	e2b3
authors	Bollinger, Elizabeth
year	1987
title	The New Studio: CAD and the Workstation: Implications for Architecture Education
doi	https://doi.org/10.52842/conf.ecaade.1987.x.c9e
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	Exploring the potential of the computer in the design process; Use of the computer through the conceptual, schematic, and design development processes, as well as the more conventional presentation techniques; and successes and failures regarding the integration of the computer into the thesis projects.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	9583
authors	Brown, Stephen
year	1987
title	Computer-Aided Learning Support for Environmental Design Students Ergonomic Design
source	Proceedings of the Human Factors Society 31st Annual Meeting 1987 pp. 889-893
summary	Intelligent CAD systems could be a useful vehicle for disseminating Human Factors principles among non Human Factors designers. Limitations of current CAD systems are discussed and an experimental system is described. It is suggested that future CAD systems should be less than expert, should be responsive to different learning styles and should employ a variety of electronic media at the user interface.
series	other
last changed	2002/07/07 16:01

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8f51
authors	Cox, Brad J.
year	1987
title	The Objective-C Environment; Past, Present, and Future
source	COMPCON 88. December, 1987. 6 p. includes bibliography
summary	The Objective-C environment is a growing collection of tools and reusable components (Software-ICs) for large-scale production system-building. Its goal is to make it possible for its users to build software systems in the way that hardware engineers build theirs, by reusing Software-ICs supplied by a marketplace in generic components rather than by building everything from scratch. The environment is based on conventional technology (C and Unix-style operating systems), which it includes and extends. The extensions presently include a compiled and an interpreted implementation of Objective-C (an object-oriented programming language based on C) and several libraries of reusable components (ICpaks)
keywords	languages, OOPS, software, programming, business, Objective-C
series	CADline
last changed	2003/06/02 13:58

_id	9999
authors	Coxe, W., Hartung, N.F., Hochberg, H.H., Lewis, B.J., Maister, D.H., Mattox, R.F. and Piven, P.A.
year	1987
title	Success Strategies for Design Professionals
source	New York, McGraw-Hill
summary	As consultants with the opportunity to analyze literally hundreds of professional design firms, we have found the search for ideal management methods challenging. Each time we've observed a format that appears to work well for some or many firms, an exception has soon appeared, contradicting what looked like a good rule to follow. For example, some firms do outstanding work organized as project teams, others are very successful with a departmentalized project structure, and still others get good results with a studio format. One of the major puzzles for observers has been finding a relation between the project delivery system used by firms (that is, "how we do our work") and how the organization itself is operated (that is, "how we structure and run the firm"). After years of study and trial and error, a model has begun to emerge that holds promise for creating some order among these issues. At the heart of this model is the recognition that although no one strategy fits all firms, there is a family of understandable principles from which almost any firm of design professionals can devise its own best strategy. We call these the SuperPositioning principles. This book sets forth the theory, a set of master strategies derived from it, and some thoughts on how to put the principles to use. We look forward to further learning in the years ahead from the experience of professionals who apply the principles in their own firms.
series	other
last changed	2003/04/23 15:14

_id	0748
authors	Coyne, R.D., Rosenman, M.A. and Radford, A.D. (et.al.)
year	1987
title	Innovation and Creativity in Knowledge-based CAD
source	Amsterdam: North-Holland, 1987. pp. 435-465
summary	The authors examine the creativity of knowledge-based design systems from a narrow information processing perspective. As a property of the design process innovation and creativity can be identified by observing both the quality of the product, and also the characteristics of the process itself. The key theme running through the discussion is the acquisition of knowledge as the key to understanding creativity. This involves not only the ability of a system to acquire knowledge, but also its ability to control its own processes and change its own structure. In order to discuss this view a model of design systems is put forward in which a distinction between interpretative and syntactic subsystems for innovation and creativity is made
keywords	design process, knowledge base, systems, creativity, knowledge acquisition, representation
series	CADline
email
last changed	2003/05/17 10:13

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	7767
authors	Danahy, John W.
year	1987
title	Sophisticated Image Rendering in Environmental Design Review Graphics Systems
source	Proceedings of ACM CHI+GI'87 Conference on Human Factors in Computing Systems and Graphics Interface 1987 p.211-217
summary	The Landscape Architecture Programme and the Computer Systems Research Institute at the University of Toronto undertook two studies using advanced rendering tools pioneered in the areas of computer animation and graphic art. Through two professional landscape architectural design studies we explored the potential role and impact of computer simulation in the initial, more creative phases of the design work. Advanced image rendering hardware and software were used to produce high quality computer drawings of design concepts. The techniques employed in this study are unique in their application to environmental design where they dramatically improve the designer's opportunities to simulate realistic images of proposed design alternatives and to consider the visual and spatial implications of such alternatives. The case studies represented in the paper were undertaken for the National Capital Commission in Ottawa, Canada. The first project is an urban design massing study called the "Parliamentary Precinct Study" and the second project is a detailed design of the "Ceremonial Routes" in Ottawa.
keywords	Image Rendering; Design Review; System Specification
series	other
last changed	2002/07/07 16:01

_id	84ca
authors	Dupagne, A.
year	1987
title	Teaching Machines. A Creative Revival of Architectural Education or a Pernicious Restoration of Technical Dominance?
doi	https://doi.org/10.52842/conf.ecaade.1987.x.b2u
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	Architectural design is not a science nor a technology. Architectural design is a praxis of both. It embodies knowledge coming from a large range of varied domains, like policy, culture, economy, environmental science, psychology, ..., but it must be clearly distinguished from Bach. It has little to do with the knowledge development or with a better understanding of physical phenomena. Architectural design is a creative activity generating products that intend to achieve: (-) the fulfilment of individual and social needs; (-) serve certain purposes; (-) in order to change the world. // It is a purposeful activity intervening directly on the built environment in order to intentionally modify it. Therefore, teaching architectural design can reasonably be organized as a training for action and, by contrast, the knowledge attainment becomes a relatively secondary objective.
series	eCAADe
last changed	2022/06/07 07:50

_id	68cb
authors	Fenves, Stephen J. and Baker, Nelson C.
year	1987
title	Spatial and Functional Representation Language for Structural Design
source	21 p. : ill. Pittsburgh: Engineering Design Research Center, CMU, December, 1987. includes bibliography
summary	Knowledge-based systems for structural design developed to date have used simple geometric representations which have not provided adequate spatial reasoning. Shape grammars are suggested as a representation for a knowledge-based system capable of performing spatial and functional reasoning. The representation needs to serve all disciplines involved in the design process, where different semantics of each discipline are associated with the same spatial information about design objects. The representation is demonstrated in the building design environment, where possible structural systems can be generated dependent upon the building's spatial layout
keywords	representation, shape grammars, structures, design, problem solving, planning, civil engineering, architecture
series	CADline
last changed	2003/06/02 10:24

_id	aa0b
authors	Fenves, Stephen J.
year	1987
title	Role of Artificial Intelligence and Knowledge-Base Expert System Methods in Civil Engineering
source	20, [21] p. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, December, 1987. includes bibliography
summary	Present use of computers in civil engineering is largely devoted to numeric, algorithmic calculations. This mode is not appropriate for the empirical, heuristic, ill-structured problems of civil engineering practice. The paper reviews recent work in artificial intelligence and expert systems addressing these latter issues, identifies the distinctive features of engineering knowledge based systems, the roles of such systems, and attempts to predict their evolution
keywords	AI, expert systems, knowledge base, design, methods, civil engineering
series	CADline
last changed	2003/06/02 13:58

For more results click below: