Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 176

Reformat results as: short short into frame detailed detailed into frame

_id	016a
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	A Knowledge-based Approach to Mathematical Design Modeling and Optimization
source	engineering Optimization. 1987. vol. 12: pp. 91-115
summary	Optimization is a well understood process in design domains. Designers formulate their design problems as single criterion or multicriteria optimization problems and then select an appropriate optimization algorithm to search for the optimal values for the design variables. The formulation and algorithm selection procedures have been considered to be activities which relied on substantive human knowledge. This paper describes a computer system, OPTIMA, which formulates design optimization problems from a pseudo-English description into canonical algebraic expressions. It then recognizes the formulation and selects appropriate algorithm(s) for its solution. Finally, it runs the selected algorithm(s) and sends the results back to the original descriptions. Areas of expert knowledge involved in carrying out the above tasks are identified. Such knowledge is explicitly encoded in the system. The basic philosophy and key features of the system are described and are illustrated with examples
keywords	structures, algorithms, knowledge base, systems, optimization, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	84ee
authors	McLaughlin, S. and Gero, John S.
year	1987
title	Acquiring Expert Knowledge from Characterized Designs
source	Artificial Intelligence for Engineering Design and Manufacturing. 1987. vol. 1: pp. 73-87
summary	The expertise of designers consists primarily of information about the relationship between goals or performance criteria and the attributes of the desired artifact that will result in performances that will satisfy these criteria. Pareto optimization is discussed as a means of structuring designs on the basis of their performance. The induction algorithm ID3 is used as means of inferring general statements about the nature of solutions which exhibit Pareto optimal performance in terms of a set of performance criteria. The rules inferred in a building design domain are compared with those extracted using a heuristic based learning system
keywords	knowledge acquisition, design, optimization, algorithms, learning, inference, architecture, performance
series	CADline
email
last changed	2003/06/02 10:24

_id	aef1
authors	Rosenman, M.A., Gero, J.S. and Coyne, R.D. (et al)
year	1987
title	SOLAREXPERT : A Prototype Expert System for Passive Solar Energy Design in Housing
source	Canberra: Aust NZ Solar Energy Society, 1987. vol.II: pp. 361-370. Also published in People and Technology - Sun, Climate and Building, edited by V. Szokolay, Univ. of Queensland, Brisbane, 1988
summary	Passive solar energy design is not an exact science in which a set of analytical procedures can be followed to produce results. Rather it depends heavily on subjective parameters and experience collected over time which is heuristic by nature. At present this knowledge is available in books but while this knowledge is comprehensive, it is unstructured and not always easy to make use of. A computer-based system allows for flexible interactive dialogue and for the incorporation of analytical procedures which may be required. This paper describes work on SOLAREXPERT, a prototype expert system to aid designers in passive solar energy design for single dwellings. The system operates at a strategic level to provide basic advice on the form of construction and types of passive solar systems and at a spatial zone level to provide more detailed advice on sizes and materials. It allows for modification of the information entered so that users may explore several possibilities
keywords	applications, experience, housing, expert systems, energy, design, architecture
series	CADline
email
last changed	2003/05/17 10:17

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	ecaade2017_172
id	ecaade2017_172
authors	Brand?o, Filipe, Paio, Alexandra and Whitelaw, Christopher
year	2017
title	Mapping Mass Customization
doi	https://doi.org/10.52842/conf.ecaade.2017.2.417
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 417-424
summary	Mass customization (MC) and personal fabrication (PF) are current relevant topics in architecture offices practice and schools design research. Architects are adopting information based design and production techniques as a response to architectural century challenges. However, is not clear how various authors used and transformed the concept in practice, research and industry after three decades since the MC term was introduced by Davis (1987). Therefore, is essential to map the most relevant works in the field in relation to production and design control. The paper presents some of the results of the ongoing study through an evolving map that aims to visualize relationships, layering complexity and revealing difference.
keywords	Mass Customization; Personal Fabrication; Housing; Map
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	0748
authors	Coyne, R.D., Rosenman, M.A. and Radford, A.D. (et.al.)
year	1987
title	Innovation and Creativity in Knowledge-based CAD
source	Amsterdam: North-Holland, 1987. pp. 435-465
summary	The authors examine the creativity of knowledge-based design systems from a narrow information processing perspective. As a property of the design process innovation and creativity can be identified by observing both the quality of the product, and also the characteristics of the process itself. The key theme running through the discussion is the acquisition of knowledge as the key to understanding creativity. This involves not only the ability of a system to acquire knowledge, but also its ability to control its own processes and change its own structure. In order to discuss this view a model of design systems is put forward in which a distinction between interpretative and syntactic subsystems for innovation and creativity is made
keywords	design process, knowledge base, systems, creativity, knowledge acquisition, representation
series	CADline
email
last changed	2003/05/17 10:13

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	e7a8
authors	Emde, H.
year	1988
title	Geometrical Fundamentals for Design and Visualization of Spatial Objects
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 171-178
summary	Every architectural object is a 3-dimensional entity of the human environment, haptically tangible and optically visible. During the architectural process of planning every object should be designed as a body and should be visualized in pictures. Thus the parts of construction get an order in space and the steps of construction get an order in time. The ideal planning object is a simulated anticipation of the real building object, which is to be performed later on. The possibility to relate the planning object immediately to the building object relies on the fact that they both have the same "geometry" This means: both can be described in the same geometric manner. Creating and visualizing spatial objects is based on geometrical fundamentals. Theoretical knowledge and practical control of these fundamentals is essential for the faultless construction and the realistic presentation of architectural objects. Therefore they have to be taught and learned thoroughly in the course of an architectural education. Geometrical design includes the forming of object- models (geometry of body boundaries), the structuring of object-hierarchies (geometry of body combinations) and the colouring of objects. Geometrical visualization includes controlling the processes of motion, of the bodies (when moving objects) and of the center of observation (when moving subjects) as well as the representation of 3-dimensional objects in 2- dimensional pictures and sequences of pictures. All these activities of architects are instances of geometrical information processing. They can be performed with the aid of computers. As for the computer this requires suitable hardware and software, as for the architect it requires suitable knowledge and capabilities to be able to talk about and to recall the perceivable objects and processes of the design with logic abstracts (language of geometry). In contrast to logical, numerical and textual informations the geometric informations concerning spatial objects are of much higher complexity. Usually these complexes of information are absorbed, processed and transmitted by the architect in a perceptive manner. The computer support in the field of geometry assumes that the processing of perceptions of the human consciousness can be converted by the computer as a framework of logical relations. Computer aided construction and representation require both suited devices for haptical and optical communication and suitable programs in particular.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	68cb
authors	Fenves, Stephen J. and Baker, Nelson C.
year	1987
title	Spatial and Functional Representation Language for Structural Design
source	21 p. : ill. Pittsburgh: Engineering Design Research Center, CMU, December, 1987. includes bibliography
summary	Knowledge-based systems for structural design developed to date have used simple geometric representations which have not provided adequate spatial reasoning. Shape grammars are suggested as a representation for a knowledge-based system capable of performing spatial and functional reasoning. The representation needs to serve all disciplines involved in the design process, where different semantics of each discipline are associated with the same spatial information about design objects. The representation is demonstrated in the building design environment, where possible structural systems can be generated dependent upon the building's spatial layout
keywords	representation, shape grammars, structures, design, problem solving, planning, civil engineering, architecture
series	CADline
last changed	2003/06/02 10:24

_id	476d
authors	Gero, J. and Maher, M.
year	1988
title	Future Roles of Knowledge-based Systems in the Design Process
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 81-90
summary	This paper examines the future roles of knowledge-based systems in the design process. It commences with a brief review of computer-aided design and knowledge-based systems prior to examining the present and future roles of knowledge-based systems in design under the headings of: design analysis/formulation; design synthesis; and design evaluation. The paper concludes with a discussion on design integration, novel design, and detail design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8eb5
authors	Gero, John S. (Conference Chairman and Editor)
year	1987
title	Expert Systems in Computer-Aided Design
source	IFIP WG 5.2 Working Conference on Expert Systems in Computer-Aided Design. proceedings. 1987. 533 p. : ill. Amsterdam: North-Holland, 1987. Also published as a book by North Holland (Amsterdam, 1987)
summary	The aim of the Expert Systems in Computer-Aided Design conference was to provide a forum for the exchange of ideas and experiences related to expert systems in computer-aided design, to present and explore the state-of-the-art of expert systems in computer-aided design, to delineate future directions in both research and practice and to promote further development. Seventeen of the nineteen papers accepted were presented with each presentation followed by a round table discussion. The discussion was taped, transcribed and edited and forms part of this volume. The authors came from seven countries, whilst the attendees represented some thirteen nationalities. There is an implicit structure in the ordering of the papers, commencing with system architectures, representation tools through applications to specific design concerns. These papers demonstrate the wide variety of knowledge engineering tools needed in computer-aided design. It is interesting to observe the progression over these three conferences in the ratio of computer scientists to design researchers amongst the authors. The balance over the period has swung from a predominance of computer scientists to a predominance of design researchers. We are beginning to see knowledge engineering development driven by designers' needs
keywords	CAD, expert systems, AI, design
series	CADline
email
last changed	2003/06/02 13:58

_id	2f5a
authors	Gero, John S. and Coyne, Richard D.
year	1987
title	Knowledge-based Planning as a Design Paradigm
source	Amsterdam: North-Holland, 1987. pp. 289-323 : tables. includes bibliography
summary	The application of sequential planning to the design process is discussed, considering design as a search through a space of states. The procedures which transform states utilize a kind of design knowledge. Planning is considered as a method of controlling the design process. Various paradigms of planning are discussed along with their application to design. The authors discuss forward deduction and backtracking, backward deduction hierarchical planning and constructive approaches to planning. These lead to the view that control in design is a multi-level process. The paradigms are illustrated with examples implemented in PROLOG. With this it is shown that knowledge-based planning is a good design paradigm
keywords	control, design process, planning, PROLOG, knowledge base
series	CADline
email
last changed	2003/05/17 10:17

_id	c948
authors	Gero, John S. and Maher, Mary Lou
year	1987
title	A Future Role of Knowledge-based Systems in the Design Process
source	CAAD Futures'87 International Conference Computer Aided Architectural Design. May, 1987. Amsterdam: Elsevier, pp. 81-90. includes bibliography
summary	This paper examines the future role of knowledge-based systems in the design process. It commences with a brief review of computer-aided design and knowledge-based systems prior to examining the present and future roles of knowledge- based systems in design under the headings of: Design Analysis (design formulation); Design Synthesis; Design Evaluation; and Detail Design. The paper concludes with a discussion on design integration and on novel design
keywords	design process, knowledge base, systems, CAD, synthesis, evaluation, analysis, detailing
series	CADline
email
last changed	2003/06/02 10:24

_id	cd8d
authors	Herbert, Daniel M.
year	1987
title	Study Drawings in Architectural Design: Applications for CAD Systems
doi	https://doi.org/10.52842/conf.acadia.1987.157
source	Integrating Computers into the Architectural Curriculum [ACADIA Conference Proceedings] Raleigh (North Carolina / USA) 1987, pp. 157-168
summary	To guide their future development, research and teaching in computer-aided design must look beyond the technical capabilities of computer systems to establish a theoretical foundation based on known processes in design. This paper suggests that such a theoretical foundation can be derived by analyzing architectural study drawings -- defined as the rough drawings that architects make in the exploratory stages of design -- to determine their epistemelogical properties. The analysis brings forward concepts from a number of disciplines related to the structure of human knowledge to identify five properties of study drawings. Based on these properties, the paper proposes strategies for application to the next generation of research and teaching in CAD systems.
series	ACADIA
last changed	2022/06/07 07:49

_id	671c
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Harfmann, Anton C.
year	1987
title	A Knowledge-Based Approach to Dynamic Computer-Aided Design Task Allocation
source	Expert Systems in Computer-Aided Design: Proceeding of the IFIP WG 5.2 Working Conference on Expert system in Computer-Aided Design --- edited by Gero, John S Sydney: North-Holland, 1987. pp. 203-224 : ill. includes bibliography.
summary	A model of the design process control that supports dynamic allocation of tasks between a designer and a computer is presented. The model is discussed theoretically, and is demonstrated through a Prolog implementation for the participatory design of single family houses. Its utility and universal applicability are established, as well as its relationship to other computational approaches to design automation
keywords	expert systems, design process, knowledge base, architecture, control, housing, applications
series	CADline
email
last changed	2003/06/02 13:58

_id	ae4f
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Majkowski, Bruce R.
year	1987
title	Computer-Aided Architectural Design Research : Summary of Proposed Research Plan
source	March, 1987. [8] p. includes bibliography
summary	The potentials of recent advancements in computer-driven, information-rich technologies have begun to effect the disciplines of architecture, planning, and design. The roles of computer-aided design tools are, however, still not completely specified, and it is the responsibility of research institutes, and in particular schools of architecture and design, to explore, define, and develop the uses of computers in architecture, planning, and design. The CAD program at the School of Architecture and Planning is based on the premise that research and education are both essential and interdependent components which provide students with necessary technical skills, improve methods of teaching fundamental design knowledge, and foster the exploration and development of new technologies and methodologies for computers in design. The program has been implemented in what the authors have termed the 'Triad Methodology' of computer-aided architectural design: the teaching of CAD principles to students, the development of a strong research program, and the use of computer tools to enhance the school's general curriculum. The CAD Lab functions as a conduit for basic and advanced research intended to enhance architecture and planning through the use of computers. The faculty and graduate students have already demonstrated their interest and ability to undertake state of the art research in CAD. It is expected that these interests will continue and proliferate in the future. This paper briefly outlines the direction, scope, and required resources for computer related research at the School of Architecture and Planning in Buffalo
keywords	CAD, education, architecture, research
series	CADline
email
last changed	2003/06/02 10:24

_id	889f
authors	Krantz, Birgit
year	1987
title	THE FULL-SCALE LABORATORY IN LUND
source	Proceedings of the 1st European Full-Scale Workshop Conference / ISBN 87-88373-20-7 / Copenhagen (Denmark) 15-16 January 1987, pp. 7-17
summary	An often repeated statement of the nature of the result of our general construction activities in general says that any building and environmental arrangement could be seen as a pure experimental product. The building, in this sense, is nothing but one single full-scale experiment started afresh each time, unfortunately, we could add, without the consistent follow-up measures. In view of this way of understanding the building process you might deduce the interest in a more anticipating attitude.and behaviour, namely the mock-up method or the full-scale design process, based on the philosophy that in a situation of uncertainty you had better try before than after. An underlying presumption is, however, that generally there is a lack of knowledge about the consequences by transferring spatial and design ideas from. drawings to one to one realization. A lack of knowledge not only-among lay, people but also among professionals. The mock-up practice can also to the same extent be derived from a pure investigative interest with the aim to virtually analyze general or specific problems in the* relationship man and the built environment, particularly buildings and spatial settings on the micro level. That means the use of the full-scale method for the search for basic design knowledge. In this sense the mock-up activities started in Sweden.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:09

For more results click below: